ECA EIA/ECA-576- A

Resistors, Rectangular, Surface Mount Precision

ECA EIA/ECA-703- A

General Resistor Stress Test Qualification Specification

ECA EIA/ECA- 957

IPD APPLICATION GUIDELINE (TERMINATION TECHNIQUES)

ECA EIA/ECA- 959

THIN FILM RC SPECIFICATION

ECA EIA/ECA- 960

ASSEMBLY COMPONENT TRAY - ACT

ECA EIA/ECA- 961

QUALIFICATION SPECIFICATION FOR DIE LEVEL NETWORKS WITH SOLDER BUMP INTERCONNECTS

ECA EIA/ECCB- 952

Standard for Plans to Determine Lead Content of Electronic Components and Related Equipment

ECA EIA/IS- 535BAAE

Detail Specification for Low ESR Molded Tantalum Chip

ECA EIA-198-1- F

Ceramic Dielectric Capacitors Classes I, II, III and IV - Part I: Characteristics and Requirements-Revision of EIA-198-1-E

ECA EIA-296- F

Lead Taping of Components in Axial Lead Configuration for Automatic Handling

ECA EIA-310- D

Cabinets, Racks, Panels, and Associated Equipment

ECA EIA-327- A

Solvent Resistance of Applied Marking Materials

ECA EIA-364- 01B

TP-01B Acceleration Test Procedure for Electrical Connectors-Revision of EIA- 364-01A

ECA EIA-364- 02C

TP-02C Air Leakage Test Procedure for Electrical Connectors

ECA EIA-364- 03B

TP-03B Altitude Immersion Test Procedure for Electrical Connectors

ECA EIA-364- 04A

TP-04A Normal Force Test Procedure for Electrical Connectors

ECA EIA-364- 05B

TP-05B Contact Insertion, Release and Removal Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2012.1

ECA EIA-364- 06B

TP-06B Contact Resistance Test Procedure for Electrical Connectors

ECA EIA-364- 08B

TP-08B Crimp Tensile Strength Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2003.1

ECA EIA-364- 09C

TP-09C Durability Test Procedure for Electrical Connectors and Contacts

ECA EIA-364- 1000.01

TS-1000.01 Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Business Office Applications

ECA EIA-364- 101

TP-101 Attenuation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems

ECA EIA-364- 103

TP-103 Propagation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems

ECA EIA-364- 104A

TP-104A Flammablility Test Procedure for Electrical Connectors

ECA EIA-364- 105

TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors

ECA EIA-364- 106

TP-106 Standing Wave Ratio (SWR) Test Procedure for Electrical Connectors

ECA EIA-364- 107

TP-107 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems

ECA EIA-364- 108

TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable Assemblies or Interconnection Systems

ECA EIA-364- 109

TP-109 LOOP INDUCTANCE MEASUREMENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS (1 nH 10 nH)

ECA EIA-364- 13B

TP-13B Mating and Unmating Forces Test Procedure for Electrical Connectors

ECA EIA-364- 16A

TP-16A Stripping Force Test (Solderless Wrapped Connectors) Test Procedure for Electrical Connectors

ECA EIA-364- 17B

TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 19A

TP-19A Torsional Insert Retention Test Procedure for Electrical Connectors- Revision of EIA-364-19

ECA EIA-364- 20C

TP-20C Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts

ECA EIA-364- 21C

TP-21C Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and Coaxial Contacts

ECA EIA-364- 22B

TP-22B Simulated Life Test Procedure for Electrical Connectors

ECA EIA-364- 23B

TP-23B Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 24B

TP-24B Maintenance Aging Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2002.1

ECA EIA-364- 25C

TP-25C Probe Damage Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2006.1

ECA EIA-364- 27B

TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors

ECA EIA-364- 28D

TP-28D Vibration Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 29B

TP-29B Contact Retention Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2007.1

ECA EIA-364- 30A

TP-30A Capacitance Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 31B

TP-31B Humidity Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 32C

TP-32C Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 35B

TP-35B Insert Rentention Test Procedure for Electrical Connectors-Revision of EIA-364-35A

ECA EIA-364- 37B

TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2014

ECA EIA-364- 38B

TP-38B Cable Pull-Out Test Procedure for Electrical Connectors

ECA EIA-364- 39B

Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets- TP-39B

ECA EIA-364- 40B

TP-40B Crush Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2008.1

ECA EIA-364- 41C

TP-41C Cable Flexing Test Procedure for Electrical Connectors

ECA EIA-364- 42B

TP-42B Impact Test Procedure for Electrical Connectors

ECA EIA-364- 43B

TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors

ECA EIA-364- 45A

TP-45A Firewall Flame Test Procedure for Electrical Connectors

ECA EIA-364- 47A

TP-47A Conductor Unwrap (Solderless Wrapped Connection) Test Procedure for Electrical Connectors-Revision of EIA-365-47

ECA EIA-364- 51A

TP-51 Ice Resistance Test Procedure for Electrical Connectors

ECA EIA-364- 52A

TP-52A Solderability of Contact Terminations Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 53B

TP-53B Nitric Acid Vapor Test, Gold Finish Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 54A

TP-54A Magnetic Permeability for Test Procedure for Electrical Connectors, Contacts, and Sockets

ECA EIA-364- 58A

TP-58 Temperature Life with Mechanical Loading for Connectors with Removable Contacts (Static Mechanical Load at Temperature) Test Procedure for Electrical Connectors

ECA EIA-364- 62A

TP-62A Terminal Strength Test Procedure for Electrical Connectors, and Sockets

ECA EIA-364- 66A

TP-66A EMI Shielding Effectiveness Test Procedure for Electrical Connectors

ECA EIA-364- 68A

TP-68A Actuating Mechanism Test Procedure for Electrical Connectors- Revision of EIA-364-38

ECA EIA-364- 69A

TP-69A Inductance Measurement Test Procedure for Electrical Connectors and Sockets (10 nH - 100 nH)

ECA EIA-364- 71B

TP-71b Solder Wicking (Wave Solder Technique) Test Procedure for Electrical Connectors and Sockets-Revision of EIA-364-71A; Errata July 13, 2001

ECA EIA-364- 78A

TP-78A Cavity-To-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors

ECA EIA-364- 80

TP-80 Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockets

ECA EIA-364- 81A

TP-81 Combustion Characteristics Test Procedure for Electrical Connector Housings, Connector Assemblies and Sockets

ECA EIA-364- 82A

TP-82A Corrosivity of Plastics Test Procedure for Electrical Connector and Socket Housing

ECA EIA-364- 83

TP-83 Shell-to-Shell and Shell-to-Bulkhead Resistance Test Procedure for Electrical Connectors

ECA EIA-364- 90

TP-90 Crosstalk Ratio Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnect Systems

ECA EIA-364- 96

TP-96 Plated Through Hole Intregrity Test Procedure for Electrical Connectors

ECA EIA-364- 99

TP-99 Gage Location and Retention Test Procedure for Electrical Connectors

ECA EIA-364- D

Electrical Connector/Socket Test Procedures Including Environment Classifications-Revision of EIA-364-c

ECA EIA-448- 19A

Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System

ECA EIA-448- 21A

Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System

ECA EIA-448- 2A

Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering

ECA EIA-463- B

Fixed Aluminum Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and for Standard Duty (Type 2)

ECA EIA-469- C

Standard Test Method for Destructive Physical Analysis (DPA) of Ceramic Monolithic Capacitors

ECA EIA-481-2- A

16 mm, 24 mm, 32 mm, 44 mm & 56 mm Embossed Carrier Taping of Surface Mount Components for Automatic Handling-Revision of 481-2 and Inclusion of EIA-481-3; Revision of EIA-481-2-A and Inclusion of Parts of EIA-481-1-A

ECA EIA-503- A

Recommended Practice for the Measurement of X-Radiation from Direct-View Television Picture Tubes-Errata: 03/06/2001

ECA EIA-5200000- D

Generic Specification for Special-Use Electromechanical Switches of Certified Quality

ECA EIA-520E000- A

Sectional Specification In-Line Switches of Certified Quality

ECA EIA-540B0AA- A

Detail Specification for Production Ball Grid Array (BGA) High Pin Count (1089 Pins and Greater) Socket for Use in Electronic Equipment-Revision of EIA-540B0AA

ECA EIA-540CAAD- A

Detail Specification for 2 Pole, 5 A Relay Sockets

ECA EIA-540CAAE- A

Detail Specification for 3 Pole, 10 A Relay Sockets

ECA EIA- 540HA00

Blank Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment

ECA EIA- 540J000

Sectional Specification for Battery Holders for Use in Electronic Equipment

ECA EIA- 540J0AA

Detail Specification for Cylindrical Battery Holders, Standard Profile, for Use in Electronic Equipment

ECA EIA- 540J0AB

Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment

ECA EIA-616- A

Detail Specification for 2 Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes

ECA EIA- 700A0AF

Detail Specification for Trapezoidal Shielded Connector 0.8 mm Pitch Used with Very High Density Cable Interconnect (VHDCI)

ECA EIA- 700BAAD

Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "A"

ECA EIA- 700BAAE

Detail Specification for Shielded Rectangular Connectors for Universal Serial Bus Plus Power Connectors Series "B"

ECA EIA- 704

72 mm Through 200 mm Carrier Tapes for Packaging Components for Automatic Handling

ECA EIA-704- 1

Adhesively-Sealed Component Packaging-Addendum No. 1 to EIA-704

ECA EIA-704- 2

Mechanically-Interlocked Component Packaging-Addendum No. 2 to EIA- 704

ECA EIA-704- 2.1

Mechanically-Interlocked Component Packaging Flat Carrier-(Amendment No. 1 to Addendum No. 2 of EIA-704

ECA EIA-726

8 mm Punched & Embossed Carrier Taping of Surface Mount Components for Automatic Handling of Devices Generally Smaller Than 2.0 mm x 1.2 mm

ECA EIA- 740

Specification for Small Form Factor 88.9 mm (3.5 in) Disk Drives

ECA EIA- 741

Specification for Small Form Factor 133.35 mm (5.25 in) Disk Drives

ECA EIA- 743

Usable Screen Dimensions for Monochrome Display Tubes

ECA EIA- 747

Adhesive Backed Punched Plastic Carrier Taping of Singulated Bare Die and Other Surface Mount Components for Automatic Handling of Devices Generally Less Than 1.0 mm Thick

ECA EIA- 773

Check List for Document Development and Revision

ECA EIA- 800

Integrated Passive Device (IPD) Chipscale Package Design Guidelines

ECA EIA- 809

Solid Tantalum Capacitor Application Guideline

ECA EIA- 815

Miniature Aluminum Electrolytic Capacitor (Leaded) Qualification Specification

ECA EIA- 850

ECA Component Registration Integrated Passive Devices Product Registrations

ECA EIA- 944

Surface Mount Ferrite Chip Bead Qualification Specification

ECA EIA- 945

Surface Mount Inductor Qualification Specification

ECA EIA- 948

Component Tray for Automated Handling

ECA IS- 34

Leaded Surface Mount Resistor Networks Fixed Film

ECA IS- 35

Two-Pin Dual-In-Line Capacitors

ECA IS-36

Chip Capacitors, Multi-Layer (Ceramic Dielectric)

ECA IS- 37

Multiple Layer High Voltage Capacitors (Radial Lead Chip Capacitor)

ECA IS- 38

Radial Lead Capacitors (Conformally Coated)

ECA IS- 39

Ceramic Dielectric Axial Capacitors (Glass Encapsulated)

ECA IS-43

Local Area Network Twisted Pair Data Communications Cable Adopted for Use in the U.S. National Electronic Components Quality Assessment System (NECQ-System)

ECA IS- 43AA

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Outdoor Cable

ECA IS- 43AB

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Non-Plenum Cable

ECA IS- 43AC

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Riser Cable

ECA IS- 43AD

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Plenum Cable

ECA IS- 43AE

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Nonplenum Cable

ECA IS- 43AF

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Plenum Cable

ECA IS- 43AG

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 6, Office Cable

ECA IS- 43AH

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 8, Undercarpet Cable

ECA IS- 43AJ

Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 9, Plenum Cable

ECA IS-46

Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices

ECA IS- 47

Contact Termination Finish Standard for Surface Mount Devices

ECA IS- 48

Axial Lead Fixed Radio Frequency (RF) Coils

ECA IS- 692

Ceramic Capacitor Qualification Specification

ECA IS- 701

Production Ball Grid Array (BGA) Socket Test Specification

ECA IS- 717

Surface Mount Tantalum Capacitor Qualification Specification

ECA IS- 722

Low-Voltage Supplemental Fuse Qualification Specification

ECA IS- 749

Rectified Mains Application Expected Wear-Out Lifetime Test

ECA IS- 753

Two-Part High Density Blade and Backplane Tuning Fork Connector

ECA IS- 757

Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors

ECA IS- 772

User´s Application Guide to Fuses

ECA IS- 84

Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment

ECA J-STD- 001C

Requirements for Soldered Electrical and Electronic Assemblies

ECA J-STD- 002B

Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

ECA PDP- 100

Parts Division Publication 100 Registered and Standard Mechanical Outlines for Electronic Parts

ECA SP 4283

Aluminum-Electrolytic Capacitor Application Guideline-To be published as EIA/ECA-797

ECA SP 4621

Standard Test Method for Destructive Physical Analysis (DPA) of Ceramic Monolithic Capacitors-To be published as ANSI/EIA/ECA-469-D

ECA SP 4942- A

General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets-To be published as ANSI/EIA/ECA-364-60A

ECA SP 4945- A

Contact Retention Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-29C

ECA SP 4970

Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment-To be published as ANSI/EIA-540DAAA-A

ECA SP 4971

Detail Specification for 1.27 mm Pitch, 68 Circuit Memory Card Interconnect System-To be published as ANSI/EIA-700AOAB

ECA SP 4982- 1

Generic Specification for Sockets for Use in Electronic Equipment-To be published as ANSI/EIA/ECA-5400000-B

ECA SP 4984

Surface Mount Aluminum Electrolytic Chip Capacitor with Polymer Cathode-To be published as ANSI/EIA/ECA-955

ECA SP 4985

Aluminum Electrolytic Chip Capacitor with Polymer Cathode-To be published as ANSI/EIA/ECA-956

ECA SP 5038- 1

Environmental Test Methodology for Assessing the Performance of Electircal Connectors and Sockets Used in Controlled Environmental Applications-To be published as ANSI/EIA/ECA-364-1000.01A, TS-1000.01A

ECA SP 5050

Fluid Immersion Test Procedure for Electrical Connectors-To be published as ANSI/EIA-364-10C

ECA SP 5051

Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts-To be published as ANSI/EIA-364-20C

ECA SP 5052

Resistors, Rectangular, Surface Mount, General Purpose-To be published as ANSI/EIA-575-A

ECA SP 5053

Resistors, Rectangular, Surface Mount, Precision-To be published as ANSI/EIA-576-A

ECA SP 5055

Specification for Parallel 1.8 Inch Drive Form Factor (78 millimeter x 54 millimeter)-To be published as ANSI/EIA/ECA-676-A

ECA SP 5056

Specification for Dimensions and Connector Locations of Small Form Factor 45 Millimeter (1.8 inch) Disk Drive-To be published as ANSI/EIA-674-A

ECA SP 5058

Specification for Small Form Factor 63.5 mm (2.5 inch) Disk Drives-To be Published as ANSI/EIA-720-A

ECA SP 5059

Specification for Small Form Factor Power Connector Pin Dimensions- Proposed Reaffirmation of ANSI/EIA-677

ECA SP 5064- A

Thermal Cycling Test Procedure for Electrical Connectors and Sockets-To be published as ANSI/EIA/ECA-364-110

ECA SP 5071

Metallic Coating Thickness Measurement of Contacts Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-48A

ECA SP 5083

Test Procedures for Electrical Connectors and Sockets-To be published as ANSI/EIA-364-5, 7, 8, 24, 25, 27, 37, 40, 44, 79, 85, 87, 88, 93, 94, 97, and 98

ECA SP 5089

Current Cycling Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-55A

ECA SP 5103

Fluid Immersion Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-10D

ECA SP 5105

Metallic Coating Thickness Measurement of Contacts Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-23C

ECA SP 5106

Contact Resistance Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-06C

ECA SP 5107

Press Fit Compliant Pin Termination Test Sequence for Electrical Connectors and Contacts-To be published as ANSI/EIA/ECA-364-1002

ECA SP 5108

Test Procedures for Electrical Connectors and Sockets-Reaffirmations for ANSI/EIA/ECA-364-2, 3, 9, 13, 14, 26, 28, 35, 38, 42, 50, 54, 95, 99, 100, 102, and 103

ECA SP 5109- A

Visual and Dimensional Inspection Test Procedure for Electrical Connectors and Sockets-To be published as ANSI/EIA/ECA-364-18B

ECA SP 5110

Contact Strength Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-15A

ECA SP 5112

Electrical Socket Specifications-Proposed Reaffirmation of ANSI/EIA- 700AOAC, EIA-540AOOO, EIA-540AAOO, EIA-540AAAA, EIA-540ABOO, EIA-540ABAA, EIA- 540ACOO, EIA-540ACAA, EIA-540ADOO, EIA-540BOOO, EIA-540BAOO, EIA-540BAAB, EIA- 540BAAC, EIA-540DOOO, EIA-540DA

ECA SP 5113

Lightning Strike Test Procedure for Electrical Connectors-To be published as ANSI/EIA/ECA-364-75

ECA SP 5114

Electrical Relay Socket Specifications-Proposed Reaffirmation for ANSI/EIA- 540COOOO, 540CAOOOO, 540CAAA, and 540CAAB

ECA SP 5124

Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets-To be published as ANSI/EIA/ECA-364-56C

ECA SP 5125

Vibration Test Procedure for Electrical Connectors and Sockets-To be published as ANSI/EIA/ECA-364-28E

ECA SP2800- A

Sectional Specification for Fixed Metallized Electrode Film Dielectric AC Capacitors-Comment Period Expires: November 12, 1997; EIA-580B000

ECA SP2805- B

Detail Specification for Fixed Polyethylene Terephthalate Film Dielectric DC Capacitors Radial-Leaded-Comment Period Expires: August 29,2001; ANSI/EIA-580A0AB

ECA SP2940- 1

Sectional Specification for Printed Board Connectors of Certified Quality (For Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rules)-Comment Period Expires: December 15, 1997; EIA-700A000

ECA SP3116- A

Detail Specification for Dual In-Line Memory Module (DIMM) Sockets, 1.27 mm Pitch, Vertical Mount-Comment Period Expires: July 8, 1997; EIA-540FAAE

ECA SP3275- A

Detail Specification for 8-Byte, 168 Position Dual In-Line Memory Module (DIMM) Sockets, 1.27 mm Pitch, Vertical Mount-Comment Period Expires: July 8, 1997; EIA- 540FAAF

ECA SP3444

Detail Specification for Blind-Mate, Scoop Proof, EVA and Robotically Compatible, Subminiature Rectangular, Low Force, Latching Electrical Connector for Spacecraft Use in Habitable Pressurized Modules and Low Earth Orbit (LEO)-Comment Period Expires: Sept

ECA SP3458

Blank Detail Specification for Discrete Contracts of Certified Quality- Comment Period Expires: September 22, 1997; EIA-700DA00

ECA SP3702

Detail Specification for High Density Blade Connector (396/556 Pin Contact Families)-Comment Period Expires: September 20, 1999; EIA-700A0AG

ECA SP3703

Detail Specification for High Density Tuning Fork Contacts and Components of Certified Quality-Comment Period Expires: September 20, 1999; EIA-700D0AA

ECA SP3801-A- 1

Plated Through Hole Integrity Test Procedure for Electrical Connectors-Comment Period Expires: April 6, 2002; ANSI/EIA-364-96,TP-96

ECA SP3874

Detail Specification for 8-Byte, 144 Posistion Small Outline Dual In-Line Memory Module (SO DIMM) Sockets, 0.8 mm Pitch, Right Angle, Surface Mount-Comment Period Expires: June 24, 1998; EIA-540F0AG

ECA SP4357- A

Low Voltage Supplemental Fuse Qualification Specification-Comment Period Expires: November 16, 1998; ANSI/EIA-722

ECA SP4973

Proposed New Specification Detail Specification for Production Ball Grid Array (BGA), Low Pin Count(1088 Pins and Less) Socket for Use in Electronic Equipment-Comment Period Expires: April 11, 2002; Proposed Document Number EIA-540BOAB

ECA SP4973

Proposed New Specification Detail Specification for Production Ball Grid Array (BGA), Low Pin Count (1088 Pins and Less) Socket for Use in Electronic Equipment-Comment Period Expires: April 11, 2002; Proposed Document Number EIA-540BOAB

ECA TEB 21

CRT Considerations for Raster Dot Alpha Numeric Presentations

ECA TEB 22

Magnetic Deflection Yokes

ECA TEB 24

Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution

ECA TEB 25

Survey of Data-Display CRT Resolution Measurement Techniques

ECA TEB 26

1976 CIE-UCS Chromaticity Diagram with Color Boundaries

ECA TEB 27

Relating Display Resolution and Addressability

ECA TEB23- A

Spot Pulse Width and Repetition Rate in Raster Dot Alpha-Numeric CRT Presentations for Rectangular Pulses

ECA TEP 109

Test Criteria for X-Ray Image Intensifier Tubes

ECA TEP 123

Glossary of Terms Used in the Description of Glass Components and of Their Defects

ECA TEP 137

Design-Maximum Rating System for Electron Tubes

ECA TEP 138

Noise Figure Testing of RF Amplifier Tubes (TEP 38)

ECA TEP 150

Relative Spectral Response Data for Photosensitive Devices ("S" Curves)

ECA TEP 161

Typical Characteristics of Photosensitive Surfaces

ECA TEP 167

Measurement of X-Radiation from Receiving Tubes, Recommended Practice for

ECA TEP 170

X-Radiation Detection and Measurements for Microwave Tubes, Recommended Practice on

ECA TEP 171

Measurement and Warning of Radio Frequency Leakage from Microwave Tubes, Recommended Practice for

ECA TEP 173

Quality Control of X-Radiation Emitted from High Voltage Rectifier and Shunt Regulator Receiving Tubes, Recommended Practice for

ECA TEP 181

Measurement of X-Radiation from Power Tubes, Recommended Practice for

ECA TEP 189

Electron Tube Radioactivity Calculations in Microcuries/Tube

ECA TEP 192

Glossary of Cathode-Ray Tube Terms and Definitions

ECA TEP 196

Cathode Ray Tube X-Radiation Round Robin Procedures Report of the JT-32 Committee

ECA TEP 42

Application Notes for Pulse Magnetrons-.

ECA TEP105

Industrial Cathode Ray Tube Test Methods

ECA TEP105- 10

Contrast Measurement of CRT´s

ECA TEP105-11- B

Color Measurement and White Set-Up Procedure for CRT Screens

ECA TEP105- 12

Test Method for Tube Face Reflectivity

ECA TEP105- 13

Test Method for Specular Gloss

ECA TEP105- 14

Measurement of Phosphor Persistence of CRT Screens

ECA TEP105- 15

CRT Screen and Glass Aging Procedures

ECA TEP105-16- A

Test Method for Phosphor Linearity

ECA TEP105- 17

MTF Test Method for Monochrome CRT Display Systems

ECA TEP105- 18

Color Field Uniformity Test Procedures

ECA TEP105-7- A

Line Profile Measurements in Monochrome Cathode Ray Tubes

ECA TEP105- 8

Raster Response Measurement for Monochrome Cathode Ray Tubes

ECA TEP105- 9

Line Profile Measurements in Shadow Mask and Other Structured Screen Cathode Ray Tubes

ECA TEP106- B

Worldwide Type Designation System for TV Picture Tubes and Monitor Tubes

ECA TEP110- A

Monochrome Cathode Ray Tube Bulb Criteria

ECA TEP116- C

Optical Characteristics of Cathode Ray Tube Screens

ECA TEP131 (COLOR)

Criteria for Bulb Parts for Color Picture Tubes

ECA TEP131- A

Criteria of Bulbs and Implosion Panels for Television Picture Tubes

ECA TEP140

Proposed Acceptance Sampling Procedures for Small Lots

ECA TEP146

Philosophy of Vibration Testing of Receiving Tubes (TEP46)

ECA TEP194

Considerations Used in Establishing the X-Radiation Ratings of Monochrome and Color Direct-View Television Picture and Data Display Tubes-Amendment 1 - October 1987; Amendment 2 - September 1988

ECA TEP195

Method for Calculating Refractive Gain for Color TV Picture Tube and Color Monitor Tube Screens

ECA TEP197- A

Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes

EIA EIA-704

72 mm Through 200 mm Carrier Tapes for Packaging Components for Automatic Handling

EIA EIA-704- 1

Adhesively-Sealed Component Packaging-Addendum No. 1 to EIA-704

EIA EIA-704- 2

Mechanically-Interlocked Component Packaging-Addendum No. 2 to EIA- 704