|
ECA EIA-364-30A |
TP-30A Capacitance Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364-68A |
TP-68A Actuating Mechanism Test Procedure for Electrical Connectors-Revision of EIA-364-38 |
|
ECA EIA-364-78A |
TP-78A Cavity-To-Cavity Leakage Bonding Integrity Test Procedure for Electrical Connectors |
|
ECA EIA-809 |
Solid Tantalum Capacitor Application Guideline |
|
TIA IS-J-STD-782-SERIES 1 |
GMR-1 Series 01 (01.201) General Specifications - Introduction to the GMR-1 Family-ETSI |
|
JEDEC JEP143A |
Solid State Reliability Assessment and Qualification Methodologies |
|
JEDEC JESD38 |
Standard for Failure Analysis Report Format |
|
JEDEC JESD51-1 |
Integrated Circuit Thermal Measurement Method - Electrical Test Method (Single Semiconductor Device) |
|
GEIA SP4900 |
Use of Semiconductor Devices Outside Manufacturers´ Specified Temperature Ranges-Comment Period Expires: May 27, 2002; ANSI/EIA-4900 |
|
TIA TIA/EIA/IS-824 |
Generic Broadcast Teleservice Transport Capability - Network Perspective |
|
TIA TIA/EIA-455-113 |
FOTP-113 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by the Fixed Analyzer Method |
|
TIA TIA/EIA-455-157 |
FOTP-157 Measurement of Polarization Dependent Loss (PDL) of Single-Mode Fiber Optic Components |
|
TIA TIA/EIA-455-69A |
FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers |
|
TIA TIA/EIA-455-73 |
FOTP-73 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Mechanical Characteristics of Optical Fibers |
|
TIA TIA/EIA-455-75A |
FOTP75 Fluid Immersion Aging Procedure for Optical Fiber Mechanical Properties-WITHDRAWN SEPTEMBER 2003 - REPLACED BY TIA-455-74-A |
|
TIA TIA/EIA-626 |
Multimode Fiber-Optic Link Transmission Design |
|
TIA TIA/EIA-687 |
Medium Speed Interface for Data Terminal Equipment and Data Circuit Terminating Equipment |
|
TIA TIA/EIA-732-750 |
Cellular Digital Packet Data (CDPD) System Specification Management Information Library-Upgrade of TIA/EIA/IS-732-750 |
|
TIA TIA-41.630-E |
Mobile Application Part (MAP) - Basic Call Procedures |
|
TIA TIA-41.641-E |
Mobile Application Part (MAP) - Short Message Service (SMS) Procedures |
|
TIA TIA-41.660-E |
Mobile Application Part (MAP) - WIN Procedures |
|
TIA TIA-455-189 |
FOTP-189 Ozone Exposure Test for Fiber Optic Components |
|
TIA TIA-455-190 |
FOTP-190 Low Air Pressure (High Altitude) Testing of Fiber Optic Components |
|
TIA TIA-455-199 |
FTOP-199 In-Line Polarization Crosstalk Measurement Method for Polarization-Maintaining Optical Fibers, Components, and Systems |
|
TIA TIA-492A000-A |
Sectional Specification for Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA-604-7A |
FOCIS-7 Fiber Optic Connector Intermateability Standard - Type SG |
|
TIA TIA-605 |
Facsimile DCE-DTE Packet Protocol Standard |
|
TIA TIA-873.006-1[E] |
All-IP Core Network Multimedia Domain Cx Interface Based on the Diameter Protocol; Protocol Details-Addendum to TIA-873.006 |
|
TIA TSB-149 |
Generic Workmanship Guidelines for Fiber Optic Connector Interoperability |
|
TIA TSB-39-B |
Message Type Assignments for the Extended Protocol Facility of TIA-136, TIA-691 and TIA/EIA/IS-2000 |
|
TIA TSB63 |
Reference Guide for Fiber Optic Test Procedures-Replaces CB9-F |
|
ECA 297-A |
Cable Connectors for Audio Facilities for Radio Broadcasting-Correction Sheet |
|
ECA 395 |
Polarized Aluminum Electrolytic Capacitors for Long Life (Type 1) and for General Purpose Application (Type 2) (Revision of RS-154-B and RS-205)-Correction - March 1972 |
|
ECA 446-3 |
Illuminated and Non-Illuminated Pushbutton Switches .750 Square Mounting, 1 and 2 Poles, .001 to 10 Amperes |
|
GEIA 494-B |
32 Bit Binary CL (BCL) and 7 Bit ASCII CL (ACL) Exchange Input Format for Numerically Controlled Machines |
|
CEA 752 |
Transport of Transmission Signal Identifier (TSID) Using Extended Data Service (XDS) |
|
CEA CEA-516 |
Joint EIA/CVCC Recommended Practice for Teletext: North American Basic Teletext Specification (NABTS) |
|
CEA CEA-600.32 |
Twisted Pair Physical Layer and Medium Specification |
|
CEA CEA-776.2 |
CEBUS-EIB Router Communications Protocol- CEBUS-EIB Router Medium Access Control Sublayer |
|
CEA CEA-776.5 |
CEBUS-EIB Router Communications Protocol- The EIB Communications Protocol |
|
ECA EIA/ECCB-952 |
Standard for Plans to Determine Lead Content of Electronic Components and Related Equipment |
|
ECA EIA-463-B |
Fixed Aluminum Electrolytic Capacitors for Alternating Current Motor Starting, Heavy Duty (Type 1) and for Standard Duty (Type 2) |
|
ECA EIA-520E000-A |
Sectional Specification In-Line Switches of Certified Quality |
|
GEIA EIA-681 |
Assessment Guide for Process Certification |
|
JEDEC JEP130A |
Guidelines for Packing and Labeling of Integrated Circuits in Unit Container Packing (Tubes, Trays, and Tape and Reel) |
|
JEDEC JEP144 |
Guideline for Residual Gas Analysis (RGA) for Microelectronic Packages |
|
JEDEC JEP179 |
Stress-Test-Driven Qualification of and Failure Mechanisms Associated with Assembled Solid State Surface- Mount Components |
|
JEDEC JESD22-A107B |
Salt Atmosphere |
|
JEDEC JESD22-B111 |
Board Level Drop Test Method of Components for Handheld Electronic Products |
|
TIA SP 3-0177-A |
Generic Telecommunications Cabling for Customer Premises-To be published as ANSI/TIA-568-C.0 |
|
ECA SP4973 |
Proposed New Specification Detail Specification for Production Ball Grid Array (BGA), Low Pin Count(1088 Pins and Less) Socket for Use in Electronic Equipment-Comment Period Expires: April 11, 2002; Proposed Document Number EIA-540BOAB |
|
TIA TIA/EIA-662.013 |
Personal Wireless Telecommunications Interoperability Standard (PWT) - Part 13 - Data Services Access Profiles A and B Class 1 |
|
TIA TIA/EIA-664-530-A |
Wireless Features Description: Group 3 Facsimile Service-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-732-100 |
Cellular Digital Packet Data (CDPD) System Specification System Specification Overview |
|
TIA TIA/EIA-898 |
Signaling Conformance Tests for cdma2000 Spread Spectrum Systems |
|
TIA TIA-1072 |
LAES for cdma2000 Push-to-Talk over Cellular |
|
TIA TIA-157 |
IP Modem Functional Capabilities Description |
|
TIA TIA-455-228 |
FOTP-228 Relative Group Delay and Chromatic Dispersion Measurement of Single-Mode Components and Devices by the Phase Shift Method |
|
TIA TIA-455-50-B |
FOTP 50 Light Launch Conditions for Long-Length Graded-Index Optical Fiber Spectral Attenuation Measurements-REPLACED BY TIA-455-78-B; ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455-59-A |
FOTP 59 Measurement of Fiber Point Discontinuities Using an OTDR-WITHDRAWN JULY 2003; REPLACED BY TIA-455-78-B |
|
TIA TIA-470.220-C |
Telecommunications – Telephone Terminal Equipment – Alerter Acoustic Output Performance Requirements for Analog Telephones |
|
TIA TIA-472C000-B |
Sectional Specification (Adopted ICEA S-83-596-2001) Standard for Optical Fiber Premises Distribution Cable |
|
TIA TIA-526-11 |
OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment |
|
TIA TIA-526-3 |
OFSTP-3 Fiber Optic Terminal Equipment Receiver Sensitivity and Maximum Receiver Input-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-604-16-B |
FOCIS 16 Fiber Optic Connector Intermateability Standard – Type LSH |
|
TIA TIA-689-A |
Telecommunications Multiline Terminal Systems PBX and KTS Support of Enhanced 9-1-1 Emergency Calling Service |
|
TIA TIA-707.10-B-1[E] |
Data Service Option for Spread Spectrum Systems |
|
TIA TIA-751 |
TIA/EIA-41-D Modifications to Support IMSI |
|
TIA TIA-820-C |
Removable User Identity Module for Spread Spectrum Systems |
|
TIA TIA-902.BAAC |
Wideband Air Interface Media Access Control Radio Link Adaptation (MAC/RLA) Layer Specification |
|
TIA TIA-902.CBAA |
Public Safety Wideband Data Equipment Performance Measurement Procedures (IOTA) |
|
TIA TIA-946-1 |
Enhanced Cryptographic Algorithms-Addendum 1-Addendum to TIA-946 |
|
TIA TSB-151 |
IP Network Reference Model (NRM) for cdma2000 Spread Spectrum Systems |
|
TIA TSB-54-B |
DTE/DCE Interface Selection Guide |
|
ECA 215 |
Broadcast Microphone Cables, Basic Requirements for |
|
ECA 443 |
Solid State Relays, EIA/NARM Standard for |
|
ECA 535BAAC-A |
Fixed Tantalum Chip Capacitor Style 1 Protected (Molded) |
|
CEA CEA-2027-A |
A User Interface Specification for Home Networks Using Web-based Protocols-(Contains Color) |
|
CEA CEA-624-A |
Product Package Bar Code Label Standard for Non-Retail Applications |
|
CEA CEA-633.10 |
Introduction to EIA-600 Conformance Specification |
|
CEA CEA-709.2-A |
Control Network Power Line (PL) Channel Specification |
|
CEA CEA-776.1 |
CEBUS-EIB Routers Communications Protocol-Description of the CEBUS-EIB Router |
|
CEA CEA-776.4 |
CEBUS-EIB Router Communications Protocol- CEBUS-EIB Router Network Layer |
|
CEA CEA-796-A |
NRSS Copy Protection Systems |
|
CEA CEA-CEB5-B |
Recommended Practice for DTV Receiver “Monitor†Mode Capability |
|
GEIA CMB7-1 |
Electronic Interchange of Configuration Management Data |
|
ECA EIA/ECA-364-12A |
TP-12A RESTRICTED ENTRY TEST PROCEDURE FOR ELECTRICAL CONNECTORS |
|
ECA EIA/ECA-886-A |
THICK FILM RESISTOR ARRAY SPECIFICATION |
|
ECA EIA-704-2 |
Mechanically-Interlocked Component Packaging-Addendum No. 2 to EIA-704 |
|
ECA EIA-944 |
Surface Mount Ferrite Chip Bead Qualification Specification |
|
ECA IS-48 |
Axial Lead Fixed Radio Frequency (RF) Coils |
|
ECA IS-753 |
Two-Part High Density Blade and Backplane Tuning Fork Connector |
|
TIA IS-J-STD-781-SERIES 1 |
GMR-2 Series 01 (01.201) General Specifications - Introduction to the GMR-2 Family of Specifications |
|
TIA IS-J-STD-782-SERIES 1 |
GMR-1 Series 01 (01.202) General Specifications - General System Description-ETSI |
|
JEDEC JESD22-A109-A |
Hermeticity |
|
JEDEC JESD51-2 |
Integrated Circuits Thermal Test Method Environmental Conditions - Natural Convection (Still Air) |
|
JEDEC JESD61A |
Isothermal Electromigration Test Procedure |
|
JEDEC JESD8C |
Interface Standard for Nominal 3 V/3.3 V Supply Digital Integrated Circuits |
|
JEDEC JIG-101 |
Material Composition Declaration for Electronic Products |
|
TIA PN 3-4350.130-RV3 |
Telecommunications - Telephone Terminal equipment - Handset Acoustic Performance Requirements For Analog Telephones-To be published as TIA-470.130-C |
|
GEIA PN-HEB1-A |
Human Engineering - Principles and Practices-To be published as GEIA-HEB1-A |
|
GEIA SP2291 |
Engineering Specifications Outline for CCTV Mounting Equipment-Comment Period Expires: February 7, 1990; EIA-577 |
|
TIA SP4834 |
FOCIS 14 Fiber Optic Connector Intermateability Standard, Type SMC-Comment Period Expires: October 17, 2000; TIA/EIA-601-14 |
|
TIA TIA/EIA-102.AAAC |
Conformance Test for the Project 25 DES Encryption Protocol |
|
TIA TIA/EIA-136-133-E ERTA |
TDMA Third Generation Wireless - Digital Traffic Channel Layer Three |
|
TIA TIA/EIA-136-670 |
TDMA Third Generation Wireless - Packet-Data Service Teleservice Over GSM SMS |
|
TIA TIA/EIA-136-730-A |
TDMA Third Generation Wireless - Over-the-Air Programming Teleservice (OPTS) |
|
TIA TIA/EIA-136-905-A ERTA |
TDMA Third Generation Wireless - Normative Information |
|
TIA TIA/EIA-455-180-A |
FOTP-180 Measurement of the Optical Transfer Coefficients of a Passive Branching Device (Coupler) |
|
TIA TIA/EIA-578-B |
Asynchronous Facsimile DCE Control Standard, Service Class 1-Revision of TIA/EIA-578-A |
|
TIA TIA-1105 |
Terrestrial Mobile Multimedia Multicast based on Digital Video Broadcasting for Handheld Devices System |
|
TIA TIA-1878 |
Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Access Network Interfaces – Alternative Architecture |
|
TIA TIA-41.750-E |
Part 750: Wireless Radiotelecommunications Intersystem Operations – SSF/CCF Call and Service Logic Model |
|
TIA TIA-455-134 |
FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter |
|
TIA TIA-455-135 |
FOTP-135 Mesurement of Connector Ferrule Inside and Outside Diameter Circular Runout |
|
TIA TIA-455-186 |
FOTP-186 Gauge Retention Force Measurement for Fiber Optic Components |
|
TIA TIA-526-2 |
OFSTP-2 Effective Transmitter Output Power Coupled Into Single-Mode Fiber Optic Cable-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-6090000 |
Generic Specification for Optical Fiber Splices |
|
TIA TIA-658-1 |
Data Services Interworking Function Interface for Wideband Spread Spectrum Systems-Addendum 1 to TIA-658 |
|
TIA TIA-707.12-B-1[E] |
Data Service Option for Spread Spectrum Systems |
|
TIA TIA-801-A |
Position Determination Service for cdma2000 Spread Spectrum Systems |
|
TIA TSB-116-A |
Telecommunications - IP Telephony Equipment – Voice Quality Recommendations for IP Telephony-Contains Color |
|
ECA 179 |
Tube Testers, Classification of |
|
ECA 186-9E |
Passive Electronic Component Parts, Test Methods for; Method 9: Solderability |
|
ECA 377 |
Metallized Dielectric Capacitors in Metallic and Non-Metallic Cases for Direct Current Application-ANSI C83.62-71 |
|
ECA 429 |
Connectors, Electrical Flat Cable Type-IPC FC-218B |
|
ECA 448-1B |
Method 15 Standard Test Method for Electromechanical Switches (Test for Contact Bounce) |
|
ECA 448-21 |
Method 21 Test Standard for Electromechanical Switches: Environmental Effects of Machine Soldering Using an Infrared System |
|
ECA 448-3-A |
Method 3 Standard Test Methods for Electromechanical Switches: Chromaticity |
|
GEIA 491 |
Interface between a Numerical Control Unit and Peripheral Equipment Employing Asynchronous Binary Data Interchange over Circuits Having RS-423-A Electrical Characteristics |
|
ECA 540B0AE |
Detail Specification for Production Land Grid Array (LGA) Socket for Use in Electronic Equipment |
|
ECA CB-13 |
X-Ray Fluorescence for Measuring Plating Thickness |
|
CEA CEA-2032 |
Indoor TV Receiving Antenna Performance Standard |
|
CEA CEA-600.31 |
Power Line Physical Layer and Medium Specification |
|
CEA CEA-600.34 |
IR Physical Layer and Medium Specification |
|
CEA CEA-600.35 |
RF Physical Layer and Medium Specification |
|
CEA CEA-819-A |
Cable Compatibility Requirements for Two-way Digital Cable TV Systems |
|
CEA CEA-CEB12-A |
PSIP Recommended Practice |
|
TIA EIA/TIA-455-167A |
FOTP-167 Mode Field Diameter, Variable Aperture in the Far Field |
|
ECA EIA-364-82A |
TP-82A Corrosivity of Plastics Test Procedure for Electrical Connector and Socket Housing |
|
ECA EIA-364-90 |
TP-90 Crosstalk Ratio Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnect Systems |
|
ECA EIA-503-A |
Recommended Practice for the Measurement of X-Radiation from Direct-View Television Picture Tubes-Errata: 03/06/2001 |
|
ECA EIA-5400000-A |
Generic Specification for Sockets for Use in Electronic Equipment |
|
ECA EIA-540J000 |
Sectional Specification for Battery Holders for Use in Electronic Equipment |
|
ECA EIA-540J0AA |
Detail Specification for Cylindrical Battery Holders, Standard Profile, for Use in Electronic Equipment |
|
GEIA EIA-599-A |
National Electronic Process Certification Standard |
|
GEIA EIA-STD-656-B |
I/O Buffer Information Specification (IBIS) Version 4.2 |
|
ECA IS-717 |
Surface Mount Tantalum Capacitor Qualification Specification |
|
TIA IS-J-STD-782-SERIES 1 |
GMR-1 Series 01 (01.004) General Specifications - Sub-Abbreviations and Acronyms-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.008) Network Specifications - Organization of Subscriber Data-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.020) Network Specifications - Security Related Network Functions-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.040) Network Specifications - Technical Realization of the Short Message Service (SMS) Point-to-Point (PP)-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.050) Network Specifications - Transmission Planning Aspects of the Speech Service in the GMR-1 System-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.081) Network Specifications - Line Identification Supplementary Service - Stage 2-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.297) Network Specifications - Optimal Routing Technical Realization-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.008) Radio Interface Protocol Specifications - Mobile Radio Interface Layer 3 Specifications-ETSI |
|
TIA IS-J-STD-782-SERIES 5 |
GMR-1 Series 05 (05.008) Radio Interface Physical Layer Specifications - Radio Subsystem Link Control-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.011) Speech Coding Specifications - Vocoder - Substitution and Muting of Lost Frames-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.012) Speech Coding Specifications - Vocoder - Comfort Noise Aspects-ETSI |
|
TIA IS-J-STD-782-SERIES 7 |
GMR-1 Series 07 (07.001) Terminal Adaptor Specifications - General on Terminal Adaptation Functions (TAF) for Mobile Earth Stations (MES)-ETSI |
|
JEDEC JEP119A |
A Procedure for Performing SWEAT |
|
JEDEC JEP133B |
Guide for the Production and Acquisition of Radiation-Hardness- Assured Multichip Modules and Hybrid Microcircuits |
|
JEDEC JESD22-A119 |
Low Temperature Storage Life |
|
JEDEC JESD22-B106C |
Test Method B106C Resistance to Soldering Temperature for Through-Hole Mounted Devices |
|
JEDEC JESD22-B109 |
Flip Chip Tensile Pull |
|
JEDEC JESD22-B116 |
Test Method B116 Wire Bond Shear Test |
|
JEDEC JESD69A |
Information Requirements for the Qualification of Silicon Devices |
|
TIA J-STD-028 |
Performance Standard for Construction of Flip Chip and Chip Scale Bumps-IPC/EIA J-STD-028 |
|
EIA LEB2 |
Guidance for Laser Record Keeping and Reporting under the Radiation Control for Health and Safety Act of 1968 |
|
TIA SP NO 5048 |
8mm through 200 mm Embossed Carrier Taping and 8 mm & 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling-ANSI/EIA-481-C; Comment Period Expires: August 27,2003 |
|
ECA SP3116-A |
Detail Specification for Dual In-Line Memory Module (DIMM) Sockets, 1.27 mm Pitch, Vertical Mount-Comment Period Expires: July 8, 1997; EIA-540FAAE |
|
ECA TEP 150 |
Relative Spectral Response Data for Photosensitive Devices ( |
|
TIA TIA/EIA/IS-727 |
TDMA Cellular/PCS - Radio Interface - Minimum Performance Standards for Discontinuous Transmission Operation of Mobile Stations |
|
TIA TIA/EIA/IS-871 |
Markov Service Option (MSO) for CDMA 2000 Spread Spectrum Systems |
|
TIA TIA/EIA-136-410-1 |
TDMA Cellular PCS - Radio Interface - Enhanced Full-Rate Voice Codec-Addendum No.1 to TIA/EIA-136-410 |
|
TIA TIA/EIA-3700 |
Telephone Network Transmission Model for Evaluating Analog Modem Performance-Supersedes TSB37-A |
|
TIA TIA/EIA-382-A |
Minimum Standards - Citizens Band Radio Service Amplitude Modulated (AM) Transceivers Operating in the 27 MHz Band |
|
TIA TIA/EIA-455-168-A |
FOTP-168 Chromatic Dispersion Measurement of Multimode Graded-Index and Single-Mode Optical Fibers by Spectral Group Delay Measurement in the Time Domain-Withdrawn May 2003; Replaced By ANSI/TIA-455-175-B |
|
TIA TIA/EIA-455-221 |
FOTP-221-IEC 61290-5-1 - Optical Fiber Amplifiers - Basic Specification - Part 5-1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer |
|
TIA TIA/EIA-617 |
Data Transmission Systems and Equipment In-Band DCE Control |
|
TIA TIA/EIA-634-B |
MC-BS Interface for Public Wireless Communications Systems |
|
TIA TIA/EIA-664-602-A |
Wireless Features Description: Wireless Messaging Teleservice-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-732-310 |
Cellular Digital Packet Data (CDPD) System Specification Application Subprofiles |
|
TIA TIA/EIA-732-800 |
Cellular Digital Packet Data (CDPD) System Specification Overview of Supplementary Protocol Information-Upgrade of TIA/EIA/IS-732-8000 |
|
TIA TIA/EIA-732-821 |
Cellular Digital Packet Data (CDPD) System Specification MAC PICS Proforma-Upgrade of TIA/EIA/IS-732-821 |
|
TIA TIA/EIA-732-870 |
Cellular Digital Packet Data (CDPD) System Specification State Transition Tables for Mobile Network Registration Protocol (MNRP)-Upgrade of TIA/EIA/IS-732-870 |
|
TIA TIA/EIA-732-881 |
Cellular Digital Packet Data (CDPD) System Specification MNLP PICS Proforma-Upgrade of TIA/EIA/IS-732-881 |
|
TIA TIA/EIA-732-900 |
Cellular Digital Packet Data (CDPD) System Specification Protocol Testing Overview-Upgrade of TIA/EIA/IS-732-900 |
|
TIA TIA-1073.000 |
Satellite Network Modem System (SNMS) General Requirements |
|
TIA TIA-124-E |
Wireless Radio Telecommunication Intersystem Non-Signaling Data Communication DMH (Data Message Handler) |
|
TIA TIA-455-53A |
FOTP-53 Attenuation by Substitution Measurement for Multimode Graded-Index Optical Fibers or Fiber Assemblies Used in Long Length Communications Systems-Revision of EIA-455-53 |
|
TIA TIA-526-18 |
OFSTP-18 Systematic Jitter Generation Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-604-13-A |
FOCIS-13 Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 |
|
TIA TIA-604-15 |
FOCIS-15 Fiber Optic Connector Intermateability Standard – Type MF |
|
TIA TIA-777-A |
Telecommunications - Telephone Terminal Equipment - Caller Identity and Visual Message Waiting Indicator Equipment Performance Requirements |
|
TIA TIA-872-A |
3GPP2 All-IP Core Network Enhancements for Legacy MS Domain – Step 1-Contains Color |
|
TIA TIA-873.005 |
All-IP Core Network Multimedia Domain – IP Multimedia Subsystem Cx Interface Signaling Flows and Message Contents |
|
TIA TIA-873.008-1[E] |
All-IP Core Network Multimedia Domain IP Multimedia Subsystem – Accounting Information Flows and Protocol-Addendum to TIA-873.008 |
|
TIA TIA-876 |
North American Network Access Transmission Model for Evaluating xDSL Modem Performance |
|
TIA TIA-895-A |
CDMA Tandem Free Operation |
|
TIA TIA-93-B-1[E] |
Wireless Telecommunications Ai – Di Interfaces Standard–Addendum 1[E]-Addendum to TIA/EIA-93-B |
|
TIA TSB102.BAFA-A |
Project 25 Network Management Interface Overview - New Technology Standards Project - Digital Radio Technical Standards |
|
TIA TSB-159 |
Private Land Mobile Radio Two-Way Mobile Equipment Radio Frequency (RF) Electromagnetic Exposure (EME) Test Report Guidelines |
|
TIA TSB-62-1 |
ITM-1 Characteristics of Large Flaws in Optical Fibers by Dynamic Tensile Testing with Censoring |
|
TIA TSB62-10 |
ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback |
|
TIA TSB-62-3 |
ITM-3 Mode Power Distribution and Mode Transfer Function Measurement |
|
TIA TSB-87-1022 |
Cellular Digital Packet Data System Specification - Part 1022 Parameter Configuration Guidelines |
|
ECA 192-A |
Holder Outlines and Pin Connections for Quartz Crystal Units |
|
GEIA 441 |
Operator Interface Functions of Numerical Controls |
|
ECA 452 |
Fixed Film Resistors-High Resistance/High Voltage |
|
TIA 472B000 |
Sectional Specification for Fiber Optic Communication Cables for Underground and Buried Use-Replaced by EIA-472B |
|
GEIA 484-A |
Electrical and Mechanical Interface Characteristics and Line Control Protocol Using Communication Control Characters for Serial Data Link between a Direct Numerical Control System and Numerical Control Equipment Employing Asynchronous Full Duplex Transmission |
|
EIA 564 |
Standard Test Method for Chemical Compatibility of Polycarbonate by Stress Crazing Evaluations |
|
ECA 784 |
Guideline for Reel Configuration and Dimensions for Reel Diameters Larger Than 360 mm (Utilized in Applications of 16 mm to 56 mm Carrier Taping) |
|
GEIA AB3-D |
Glossary of Terms for Numerically Controlled Machines |
|
ECA CB-11 |
Surface Mounting of Multilayer Ceramic Chip Capacitors, Guidelines for |
|
CEA CEA-2013-A |
Digital STB Background Power Consumption |
|
CEA CEA-2028 |
Color Codes for Outdoor TV Receiving Antennas-Contains Color |
|
CEA CEA-909 |
Antenna Control Interface |
|
ECA EIA/ECA-364-1000.01A |
TS-1000.01 Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Controlled Environment Applications |
|
ECA EIA/ECA-576-A |
Resistors, Rectangular, Surface Mount Precision |
|
ECA EIA/ECA-956 |
Aluminum Electrolytic Chip Capacitor with Polmer Cathode |
|
GEIA EIA/IS-115 |
CDIF Integrated Meta-model Data Flow Model Subject Area-Interim Standard |
|
TIA EIA/TIA/IS-63 |
Procedures for Automatic Interworking Between Automode Modems and Modems Conforming to Recommendations V.32, V.22bis, and V.22 |
|
ECA EIA-364-52A |
TP-52A Solderability of Contact Terminations Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-540J0AB |
Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment |
|
EIA EIA-654 |
Resistance to Soldering Heat Test Procedure for Wire and Electrical Components |
|
TIA IS-4 ERTA |
Transmission Parameters for a Mu-Law Compatible PBX (Digital Loss-Level Plan) |
|
ECA IS-772 |
User´s Application Guide to Fuses |
|
TIA IS-88 |
Mobile Station - Land Station Compatibility Standard for Dual-Mode Narrowband Analog Cellular Technology |
|
TIA IS-J-STD-782-SERIES 2 |
GMR-1 Series 02 (02.011) Service Specifications - Service Accessibility-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.001) Network Specifications - Network Functions-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.011) Network Specifications - Technical Realization of Supplementary Services-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.012) Network Specifications - Location Registration and Position Identification Procedures-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.045) Network Specifications - Technical Realization of Group 3 Facsimile Using Transparent Mode of Transmission-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.088) Network Specifications - Call Barring (CB) Supplementary Services - Stage 2-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.296) Network Specifications - Terminal-to-Terminal Call (TtT)-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.006) Radio Interface Protocol Specifications - Mobile Earth Station-Gateway Station Interface Data Link Layer Specifications-ETSI |
|
TIA IS-J-STD-782-SERIES 5 |
GMR-1 Series 05 (05.001) Radio Interface Physical Layer Specifications - Physical Layer on the Radio Path - General Description-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.001) Speech Coding Specifications - Speech Processing Functions-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.031) Speech Coding Specifications - Vocoder - Discontinuous Transmission (DTX)-ETSI |
|
TIA IS-J-STD-782-SERIES 7 |
GMR-1 Series 07 (07.003) Terminal Adaptor Specifications - Terminal Adaptation Functions (TAF) for Services Using Synchronous Bearer Capabilities-ETSI |
|
JEDEC JESD22-A100-B |
Cycled Temperature-Humidity-Bias Life Test |
|
JEDEC JESD22-B100B |
Physical Dimensions |
|
JEDEC JESD370B |
Designation System for Semiconductor Devices |
|
JEDEC JESD51-7 |
High Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages |
|
JEDEC JESD52 |
Description of Low Voltage TTL-Compatible CMOS Logic Devices |
|
JEDEC JESD63 |
Standard Method for Calculating the Electromigration Model Parameters for Current Density and Temperature |
|
JEDEC JESD85 |
Methods for Calculating Failure Rates in Units of FITs |
|
TIA J-STD-026 |
Semiconductor Design Standard for Flip Chip Applications-IPC/EIA J-STD-026 |
|
TIA PN 3-0270 |
Forward Link Only Transport Specification-To be published as TIA-1120 |
|
ECA SP 5052 |
Resistors, Rectangular, Surface Mount, General Purpose-To be published as ANSI/EIA-575-A |
|
ECA TEP 109 |
Test Criteria for X-Ray Image Intensifier Tubes |
|
ECA TEP 171 |
Measurement and Warning of Radio Frequency Leakage from Microwave Tubes, Recommended Practice for |
|
TIA TIA/EIA/IS-798 |
Mechanical Mounting of Phone System Envelope and Mounting Requirements |
|
TIA TIA/EIA/IS-823-A |
TTY/TDD Extension to TIA/EIA 136-410 Enhanced Full Rate Speech Codec-Revision of TIA/EIA/IS-823 |
|
TIA TIA/EIA-136-271 |
TDMA Third Generation Wireless - Mobile Stations Minimum Performance for Global Circulation |
|
TIA TIA/EIA-136-334 |
TDMA Third Generation Wireless - Packet Data Service – Subnetwork Dependent Convergence Protocol |
|
TIA TIA/EIA-136-610-B |
TDMA Third Generation Wireless - R-DATA/SMDPP Transport-Revision of TIA/EIA-136-610-A |
|
TIA TIA/EIA-136-910-C |
TDMA Third Generation Wireless Informative Information |
|
TIA TIA/EIA-455-200 |
FOTP-200 Insertion Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
|
TIA TIA/EIA-455-203 |
FOTP-203 Launched Power Distribution Measurement Procedure for Graded-Index Multimode Fiber Transmitters |
|
TIA TIA/EIA-664-536-A |
Wireless Features Description: Group 3 Analog Fax-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-732-734 |
Cellular Digital Packet Data (CDPD) System Specification Generic Equipment Management Ensemble-Upgrade of TIA/EIA/IS-732-734 |
|
TIA TIA/EIA-732-820 |
Cellular Digital Packet Data (CDPD) System Specification State Transition Tables for the CDPD MAC Procedures |
|
TIA TIA/EIA-732-830 |
Cellular Digital Packet Data (CDPD) System Specification State Transistion Table for Mobile Data Link Protocol (MDLP) |
|
TIA TIA/EIA-855 |
Telecommunications Telephone Terminal Equipment Stutter Dial Tone Detection Device Performance Requirements |
|
TIA TIA/IS-637 |
Short Message Services for Wideband Spread Spectrum Cellular Systems-This Standard is Available Simultaneously with TIA/EIA-637-C, TIA/EIA-637-B, and TIA/EIA-637-A |
|
TIA TIA-1017 [SF] |
Software Distribution for TIA-1017 - Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) Service Option 62 - Minimum Performance Specification (MPS)-See TIA-1017 ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1017-A |
Minimum Performance Specification for the Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) - Service Option 62 for Spread Spectrum Systems-See TIA-1017-A [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1035 |
Signaling Conformance Test Specification for cdma2000 Air Interface |
|
TIA TIA-1036 |
Interoperability Test Specification for cdma2000 Air Interface |
|
TIA TIA-1096 |
Telecommunications Telephone Terminal Equipment Connector Requirements for Connection of Terminal Equipment to the Telephone Network |
|
TIA TIA-455-61-A |
FOTP61 Measurement of Fiber or Cable Attenuation Using on ODR-WITHDRAWN AUGUST 2003; REPLACED BY TIA-455-78-B |
|
TIA TIA-492E000 |
Sectional Specification for Class IVd Nonzero-Dispersion Single-Mode Optical Fibers for the 1550 nm Window |
|
TIA TIA-526-16 |
OFSTP-16 Jitter Transfer Function Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526-27 |
OFSTP-27 Procedure for System-Level Temperature Cycle Endurance Test |
|
TIA TIA-683-D |
Over-the-Air Service Provisioning of Mobile Stations in Spread Spectrum Systems |
|
TIA TIA-716 |
Telecommunications Telephone Terminal Equipment - Type 1 Caller Identity Equipment Performance Requirements |
|
TIA TIA-864-A |
Recommended Minimum Performance Standards for cdma2000 High Rate Packet Data Access Network Equipment |
|
TIA TIA-889-A [SF] |
Software Distribution for TIA-889-A – TTY - Minimum Performance Specification (MPS)-See TIA-889-A ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-902.BAAB-A |
Wideband Air Interface Scalable Adaptive Modulation (SAM) Physical Layer Specification – Public Safety Wideband Data Standards Project – Digital Radio Technical Standards |
|
TIA TSB-140 |
Additional Guidelines for Field- Testing Length, Loss and Polarity of Optical Fiber Cabling Systems-Contains Color |
|
TIA TSB-142 |
Optical Return Loss Meters - Measurement and Application Issues |
|
TIA TSB-153 |
Static Discharge Between LAN and Data Terminal Equipment |
|
TIA TSB-62.22-A |
ITM-22 Continuous Wave Method for Measuring the Raman Gain Efficiency of Single-Mode Fibers |
|
TIA TSB62-20 |
ITM-20 enhanced Bandwidth Performance over Laser-Based, Multimode Fiber Local Area Networks |
|
TIA TSB62-6 |
ITM-6 Characterization of Mode Field Diameter and Cutoff Wavelength of Single-Mode Optical Fiber by OTDR |
|
ECA 174 |
Audio Transformers for Electronic Equipment |
|
ECA 176 |
Pulse Transformers for Radar Equipment |
|
ECA 181 |
Iron Core Charging Inductors |
|
ECA 186-12E |
Passive Electronic Component Parts, Test Methods for; Method 12: Heat-Life Test |
|
ECA 405 |
Flutter Measurement of Instrumentation Magnetic Tape Recorder/Reproducers, Recommended Test Method for |
|
ECA 473 |
Relays for Electronic Equipment, EIA/NARM Standard Definitions and Terminology for |
|
ECA 501-A |
Recommended Practice for the Measurement of X-Radiation from Raster-Scanned Direct-View Data Display Cathode-Ray Tubes |
|
ECA 520D000 |
Sectional Specification for Toggle, Paddle and Rocker Switches of Certified Quality |
|
CEA 624 |
Electronic Industries Association - Product Package Bar Code Label Standard for Non-Retail Applications |
|
CEA CEA-2011 |
OTG Transceiver Specification |
|
CEA CEA-517 |
Car Audio Standard |
|
CEA CEA-544-B |
Low Frequency Immunity of Tuners in a Cable System |