|
CEA CEA-621-A |
Product and Packaging Bar Code Standard |
|
CEA CEA-639 |
Consumer Camcorder or Video Camera Low Light Performance |
|
CEA CEA-803-A |
Mobile Electronics Wiring Designations for Audio, and Vehicle Security/Convenience |
|
CEA CEA-885 |
Remote Starter Safety |
|
CEA CEA-CEB16 |
Active Format Description (AFD) & Bar Data Recommended Practice-(Contains Color) |
|
GEIA CMB4-2 |
Configuration Identification for Digital Computer Programs |
|
GEIA DMG-1 |
Data Management Implementation Guide |
|
GEIA EDIF 2 |
EDIF Connectivity Monograph Series-Volume 2 |
|
TIA EIA/TIA-455-164A |
FOTP-164 Single-Mode Fiber, Measurement of Mode Field Diameter by Far-Field Scanning |
|
ECA EIA-364-109 |
TP-109 LOOP INDUCTANCE MEASUREMENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS (1 nH 10 nH) |
|
ECA EIA-448-2A |
Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering |
|
TIA EIA-455-68 |
FOTP-68 Optical Fiber Microbend Test Procedure-No replacement |
|
JEDEC EIA-670 |
Quality System Assessment |
|
ECA EIA-815 |
Miniature Aluminum Electrolytic Capacitor (Leaded) Qualification Specification |
|
EIA EIA-832 |
Process Improvement Guidelines |
|
ECA EIA-945 |
Surface Mount Inductor Qualification Specification |
|
EIA IS-32 |
Assessment of Quality Levels in PPM Using Variables Test Data-Errata 4/19/1990 |
|
ECA IS-37 |
Multiple Layer High Voltage Capacitors (Radial Lead Chip Capacitor) |
|
ECA IS-39 |
Ceramic Dielectric Axial Capacitors (Glass Encapsulated) |
|
ECA IS-43 |
Local Area Network Twisted Pair Data Communications Cable Adopted for Use in the U.S. National Electronic Components Quality Assessment System (NECQ-System) |
|
ECA IS-722 |
Low-Voltage Supplemental Fuse Qualification Specification |
|
ECA IS-749 |
Rectified Mains Application Expected Wear-Out Lifetime Test |
|
TIA IS-89 |
Recommended Minimum Standard for 800 MHz Dual-Mode Narrowband Analog Cellular Land Stations |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.007) Network Specifications - Restoration Procedures |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.009) Network Specifications - Handover Procedures-ETSI |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.001) Radio Interface Protocol Specifications - GMR-2 Mobile Earth Station-Network Interface: General Aspects and Principles |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.084) Radio Interface Protocol Specifications - Multiparty Supplementary Services (MPTY) |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.002) Network Specifications - Network Architecture-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.003) Network Specifications - Numbering, Addressing, and Identification-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.041) Network Specifications - Technical Realization of the Short Message Service Cell Broadcast (SMSCB)-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.002) Radio Interface Protocol Specifications - GMR-1 Satellite Network Access Reference Configuration-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.005) Radio Interface Protocol Specifications - Data Link Layer General Aspects-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.021) Radio Interface Protocol Specifications - Rate Adaptation on the Access Terminal-Gateway Station Subsystem (MES-GSS) Interface-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.022) Radio Interface Protocol Specifications - Radio Link Protocol (RLP) for Data Services-ETSI |
|
TIA IS-J-STD-782-SERIES 5 |
GMR-1 Series 05 (05.004) Radio Interface Physical Layer Specifications - Modulation-ETSI |
|
TIA IS-J-STD-782-SERIES 7 |
GMR-1 Series 07 (07.002) Terminal Adaptor Specifications - Terminal Adaptation Functions (TAF) for Services Using Asynchronous Bearer Capabilities-ETSI |
|
JEDEC JEP120-A |
Index of Terms and Abbreviations Defined in JEDEC Publications |
|
JEDEC JEP134 |
Guidelines for Preparing Customer-Supplied Background Information Relating to a Semiconductor-Device Failure Analysis |
|
JEDEC JESD82-1A |
Definition of CVF857 PLL Clock Driver for Registered PC1600, PC2100, PC2700 a n d PC3200 DIMM Applications |
|
JEDEC JESD94.01 |
Application Specific Qualification Using Knowledge Based Test Methodology-Minor Revision of JESD94, January 2004 |
|
EIA LEB1 |
Safety Classification of Laser Equipment and Installations |
|
TIA SP 3-3834-RV3 |
Standard test procedure for fiber optic fibers, cables, transducers, sensors, connecting and terminating devices, and other fiber optic components-To be published as TIA-455-C |
|
ECA TEP105-13 |
Test Method for Specular Gloss |
|
TIA TIA/41.2-D |
Cellular Radiotelecommunications Intersystem Operations: Intersystem Handoff Information Flows |
|
TIA TIA/41.4-D |
Cellular Radiotelecommunications Intersystem Operations: Operations, Administration, and Maintenance Information Flows and Procedures |
|
TIA TIA/EIA/IS-833 |
G3G CDMA-MC to GSM-MAP |
|
TIA TIA/EIA-102.BABB |
Project 25 Vocoder Mean Opinion Score Conformance Test |
|
TIA TIA/EIA-126-D |
Loopback Service Options Standard (LSO) for cdma Spread Spectrum Systems-Revision of TIA/EIA-126-C |
|
TIA TIA/EIA-136-005-C ERTA |
TDMA Third Generation Wireless - Introduction, Identification, and Semi-Permanent Memory |
|
TIA TIA/EIA-136-270-C-1 |
TDMA Third Generation Wireless - Mobile Stations Minimum Performance-Addendum 1 |
|
TIA TIA/EIA-136-290-A |
TDMA Third Generation Wireless - RF Minimum Performance for 136HS Outdoor and 136HS Indoor Bearers |
|
TIA TIA/EIA-136-377-B |
TDMA Third Generation Wireless EGPRS-136 Interface Specification |
|
TIA TIA/EIA-136-510-B |
TDMA Third Generation Wireless – Authentication, Encryption of Signaling Information User Data and Privacy |
|
TIA TIA/EIA-455-130 |
FOTP-130 Elevated Temperature Life Test for Laser Diodes |
|
TIA TIA/EIA-455-196 |
FOTP-196 Guideline for Polarization - Mode Measurement in Single - Mode Fiber Optic Components and Devices |
|
TIA TIA/EIA-455-201 |
FOTP-201 Return Loss of Connectorized Polarization-Maintaining Fiber of Polarizing Fiber Pigtailed Devices and Cable Assemblies |
|
TIA TIA/EIA-455-72 |
FOTP-72 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Optical Characteristics of Optical Fibers |
|
TIA TIA/EIA-732-500 |
Cellular Digital Packet Data (CDPD) System Specification Mobility Management |
|
TIA TIA/EIA-732-831 |
Cellular Digital Packet Data (CDPD) System Specification MDLP PICS Proforma-Upgrade of TIA/EIA/IS-732-831 |
|
TIA TIA-1006-1[E] |
High Rate Broadcast Packet Data Air Interface Specification |
|
TIA TIA-1016-A[SF] |
Software Distribution for TIA-1016-A - Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) Service Options 62 and 63 - Specification-See TIA-1016-A ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1017-A [SF] |
Software Distribution for TIA- 1017-A - Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) - Service Options 62 and 63 - Minimum Performance Specification-See TIA-1017-A ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1073.002 |
Satellite Network Modem System (SNMS) Encryption Requirements |
|
TIA TIA-1074-1 [E] |
OTA Support for MEID - Addendum 1-Addendum to TIA-1074 |
|
TIA TIA-1095 |
Discontinuous Transmission (DTX) of Speech in cdma2000 Systems |
|
TIA TIA-455-122-A |
FOTP-122 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by Stokes Parameter Evaluation |
|
TIA TIA-455-172 |
FOTP-172 Flame Resistance of Firewall Connector |
|
TIA TIA-455-23-A |
FOTP-23 Air Leakage Testing of Fiber Optic Component Seals |
|
TIA TIA-472F000 |
Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable |
|
TIA TIA-4920000-B |
Generic Specification for Optical Fibers |
|
TIA TIA-492C000 |
Sectional Specification for Class IVa Dispersion-Unshifed Single-Mode Optical Fibers |
|
TIA TIA-526-15 |
OFSTP-15 Jitter Tolerance Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526-17 |
OFSTP-17 Output Jitter Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-596 |
Network Channel Terminating Equipment for Public Switched Digital Service |
|
TIA TIA-609A000 |
Sectional Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA-733-A |
High Rate Speech Service Option 17 for Wideband Spread Spectrum Communications Systems-See TIA-733-A [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-843 |
Wireless Intelligent Network Support for Location Based Services |
|
TIA TIA-866-A |
Recommended Minimum Performance Standards for cdma2000 High rate Packet Data Access Terminal |
|
TIA TIA-881 |
TIA/EIA-41-D Location Services Enhancements |
|
TIA TIA-912-B |
Telecommunications IP Telephony Equipment Voice Gateway Transmission Requirements |
|
TIA TIA-916 |
Recommended Minimum Performance Specification for TIA/EIA/IS-801-1 Spread Spectrum Mobile Stations |
|
TIA TIA-930 |
Legacy Mobile Station Domain (LMSD) - Step 1 |
|
TIA TIA-939 |
Procedures for Automatic Interworking Between T.30, V.18, V.8 and V.32/ Annex A Automode Modems and V.32 bis, V32,V.22 bis, V.21, V.23.212-Type |
|
TIA TSB10-F |
Interference Criteria for Microwave Systems |
|
TIA TSB-50 |
User Interface for Authentication Key Entry |
|
TIA TSB62-12 |
ITM-12 Microbend Sensitivity Test Methods |
|
TIA TSB62-23 |
ITM-23 Measurement of the Nonlinear Coefficient of Single-Mode Fibers |
|
TIA TSB78 |
Land Mobile Linear Analog Modulation Communications Equipment Measurement and Performance Standards |
|
ECA 186-3E |
Passive Electronic Component Parts, Test Methods for; Method 3: Humidity (Steady State-Sealed Container) |
|
ECA 380-A |
Electrical Connectors, Small Contact Standard for |
|
ECA 446-4 |
Detail Specification Illuminated and Non-Illuminated Non-Sensitive Pushbutton Switches, .625 Square Mounting, One and Two Pole, 1.0 Ampere |
|
ECA 520AAAE |
Detail Specification for Switch, Pushbutton, Square or Rectangular Mounting, Illuminated or Non-Illuminated, 3 A |
|
ECA 540HAAA |
Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
|
ECA 700AOAC |
Detail Specification for 1.00 mm Pitch, 88 Circuit Dram Memory Card Interconnect System |
|
CEA CEA-600.81 |
Common Application Language (CAL) Specification |
|
CEA CEA-851-A |
Versatile Home Network |
|
CEA CEA-897 |
F-Connectors Color Coding for Home Television Systems |
|
CEA CEA-CPEB6-A |
Preferred Voltage and Impedance Values for the Interconnection of Audio Products |
|
GEIA CMB4-4 |
Configuration Change Control for Digital Computer Programs |
|
GEIA EDIF 1 |
Introduction to EDIF Monograph Series-Volume 1 |
|
GEIA EIA/IS-107 |
CDIF - Framework for Modeling and Extensibility-Interim Standard |
|
JEDEC EIA-308-A |
Preparation of Outline Drawings of Solid State Products for JEDEC Type Registration |
|
JEDEC EIA-321-C |
Numbering of Like-Named Terminal Functions in Semiconductor Devices and Designation of Units in Multiple-Unit Semiconductor Devices |
|
ECA EIA-540CAAA |
Detail Specification on Relay Socket - 10 A for Balanced Armature Relay |
|
GEIA EIA-555 |
Lot Acceptance Procedure for Verifying Compliance with the Specified Quality Levels (SQL) in PPM-Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
ECA EIA-740 |
Specification for Small Form Factor 88.9 mm (3.5 in) Disk Drives |
|
GEIA GEIA-STD-0001 |
IBIS Interconnect Modeling Specification |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.013) Network Specifications - Discontinuous Reception (DRX)-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.022) Network Specifications - Functions Related to Mobile Earth Station (MES) in Idle Mode-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.090) Network Specifications - Unstructured Supplementary Service Data (USSD) - Stage 2-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.298) Network Specifications - Technical Realization of High-Penetration Alerting-ETSI |
|
TIA IS-J-STD-782-SERIES 3 |
GMR-1 Series 03 (03.299) Network Specifications - Position Reporting Services - Stage 2 Service Description-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.003) Radio Interface Protocol Specifications - Channel Structures and Access Capabilities-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.004) Radio Interface Protocol Specifications - Layer 1 General Requirements-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.007) Radio Interface Protocol Specifications - Mobile Radio Interface Signalling Layer 3 General Aspects-ETSI |
|
TIA IS-J-STD-782-SERIES 4 |
GMR-1 Series 04 (04.013) Radio Interface Protocol Specifications - Performance Requirements on the Mobile Radio Interface-ETSI |
|
TIA IS-J-STD-782-SERIES 5 |
GMR-1 Series 05 (05.005) Radio Interface Physical Layer Specifications - Radio Transmission and Reception-ETSI |
|
TIA IS-J-STD-782-SERIES 5 |
GMR-1 Series 05 (05.010) Radio Interface Physical Layer Specifications - Radio Subsystem Synchronization-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.010) Speech Coding Specifications - Vocoder - Speech Transcoding-ETSI |
|
TIA IS-J-STD-782-SERIES 6 |
GMR-1 Series 06 (06.032) Speech Coding Specifications - Vocoder - Voice Activity Detection (VAD)-ETSI |
|
JEDEC JEP148 |
Reliability Qualification of Semiconductor Devices Based on Physics of Failure Risk and Opportunity Assessment |
|
JEDEC JESD202 |
Method for Characterizing the Electromigration Failure Time Distribution of Interconnects Under Constant-Current and Temperature Stress |
|
JEDEC JESD36 |
Standard for Description of Low-Voltage TTL-Compatible, 5 V-Tolerant CMOS Logic Devices |
|
JEDEC JESD51-8 |
Integrated Circuit Thermal Test Method Environmental Conditions - Junction-to-Board |
|
JEDEC JESD82-3B |
Definition of the SSTVN16857 2.5-2.6 V 14-Bit SSTL_2 Registered Buffer for PC1600, PC2100, PC2700, and PC3200 DDR DIMM Applications |
|
JEDEC JESD8-5A |
2.5 V (PLUS OR MINUS) 0.2 V (Normal Range) and 1.8 V – 2.7 V (Wide Range) Power Supply Voltage and Interface Standard for Nonterminated Digital Integrated Circuits |
|
JEDEC JESD86 |
Electrical Parameters Assessment |
|
JEDEC JESD8-6 |
High Speed Transceiver Logic (HSTL) A 1.5V Output Buffer Supply Voltage Based Interface Standard for Digital Integrated Circuits |
|
ECA SP 5050 |
Fluid Immersion Test Procedure for Electrical Connectors-To be published as ANSI/EIA-364-10C |
|
ECA SP 5162 |
Contact Axial Concentricity Test Procedure for Electrical Connectors-To be published as ABSI/EIA/ECA-364-07C |
|
ECA TEP105-15 |
CRT Screen and Glass Aging Procedures |
|
TIA TIA/EIA/IS-657 |
Packet Data Service Option Standard for Wideband Spread Spectrum Systems |
|
TIA TIA/EIA/IS-737 |
Enhancements for Circuit Mode Services |
|
TIA TIA/EIA-136 |
TDMA Cellular PCS |
|
TIA TIA/EIA-136-123-F |
TDMA Third Generation Wireless Digital Control Channel Layer 3 |
|
TIA TIA/EIA-136-140-B |
TDMA Third Generation Wireless - Analog Control Channel |
|
TIA TIA/EIA-136-350-C |
TDMA Third Generation Wireless - Data Service Control-Revision of TIA/EIA-136-350-B |
|
TIA TIA/EIA-455-223 |
FOTP-223 - IEC 61291-2 - Optical Fiber Amplifiers - Part 2: Digital Applications - Performance Specification Template |
|
TIA TIA/EIA-664-505-A |
Wireless Features Description: Call Forwarding - Unconditional-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-507-A |
Wireless Features Description: Call Waiting-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-801-A |
Wireless Features Description: System Functionality-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-732-751 |
Cellular Digital Packet Data (CDPD) System Specification Managed Object Conformance Statements (MOCS)-Upgrade of TIA/EIA/IS-732-751 |
|
TIA TIA/EIA-732-920 |
Cellular Digital Packet Data (CDPD) System Specification MAC Abstract Test Suite-Upgrade of TIA/EIA/IS-732-920 |
|
TIA TIA/EIA-732-930 |
Cellular Digital Packet Data (CDPD) System Specification MDLP Abstract Test Suite-Upgrade of TIA/EIA/IS-732-930 |
|
TIA TIA/EIA-793 |
North American Telephone Network Transmission Model for Evaluating Analog Client and Digitally Connected Server Modems |
|
TIA TIA/EIA-828 |
BTS-BSC Inter-Operability (Abis Interface) |
|
TIA TIA/EIA-829 |
Tandem Free Operation (TFO)-Contains Color |
|
TIA TIA/IS-778 |
Wireless Authentication Enhancements Descriptions |
|
TIA TIA-1017 |
Minimum Performance Specification for the Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) - Service Option 62 for Spread Spectrum Systems-TIA-1017 [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1020 |
IP-Based Location Services |
|
TIA TIA-41.640-E |
Mobile Application Part (MAP) - Intersystem Procedures |
|
TIA TIA-41.790-E |
Part 790: Wireless Radiotelecommunications Intersystem Operations – Annexes |
|
TIA TIA-455-106 |
FOTP 106 Procedures for Determining Threshold Current of Semiconductor Lasers-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455-128 |
FOTP 128 Procedures for Determining Threshold Current of Semiconductor Lasers-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455-198 |
FTOP-198 Measurement of Polarization Dependence of Insertion Loss of Single-Mode Fiberoptic Components by a Mueller Matrix Method |
|
TIA TIA-455-229 |
FOTP-229 Optical Power Handling and Damage Threshold Characterization |
|
TIA TIA-492CAAB |
Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers with Low Water Peak |
|
TIA TIA-5430000 |
Generic Specification Field Portable Electronic Instruments for Optical Fiber System |
|
TIA TIA-592-A |
Asynchronous Facsimile DCE Control Standard - Service Class 2 |
|
TIA TIA-619 |
Aggregation of Multiple Independent 56 Kbits/s or 64 Kbits/s Channels into a Synchronized Wideband Connection |
|
TIA TIA-688 |
DTE/DCE Interface for Digital Cellular Equipment |
|
TIA TIA-804-B |
Terrestrial Land Mobile Radio - Antenna Systems – Standard Format For Digitized Antenna Patterns |
|
TIA TIA-847-B |
TIA-41 Enhancements for Roamer Verification Database |
|
TIA TIA-873.002-A |
All-IP Core Network Multimedia Domain, IP Multimedia Subsystem – Stage 2 |
|
TIA TIA-929-1 |
Terrestrial Land Mobile Radio – Antenna Systems – Standard Format for Digitized Filter Characteristics, Addendum 1 |
|
TIA TIA-943 |
TDMA Third Generation Wireless Extended Revision Guidelines (ERG) Incorporation of MEID |
|
TIA TSB120 |
Polarization Maintaining Fiber in Telecommunications: Applications and Challenges |
|
TIA TSB-133 |
Private Land Mobile Radio (FCC Part 90) Two Way Mobile and Portable Equipment RF Exposure (EME) Labeling, Product Manual, User Awareness, and Control Information to Meet FCC MPE/SAR Guidelines |
|
TIA TSB-19 |
Optical Fiber Digital Transmission Systems Considerations for Users and Suppliers |
|
TIA TSB62-13 |
ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending |
|
TIA TSB62-7 |
ITM-7 Characterization of Fiber Strip Damage by Dynamic Tensile Testing |
|
TIA TSB-87-1018 |
Cellular Digital Packet Data System Specification - Part 1018 Authentication Services |
|
ECA 161 |
Ceramic Based Printed Circuits, Unit Standards for |
|
ECA 175 |
Audio Inductors |
|
ECA 186-10E |
Passive Electronic Component Parts, Test Methods for; Method 10: Effect of Soldering |
|
ECA 186-1E |
Passive Electronic Component Parts, Test Methods for; Method 1: Humidity (Steady State) |
|
ECA 188 |
Automation Requirements, Dimensional System for |
|
ECA 197-A |
Power Filter Inductors for Electronic Equipment |
|
ECA 216 |
Adhesion of Printed Wiring, Method of Test for |
|
ECA 230 |
Color Marking of Thermoplastic Covered Wire |
|
ECA 256-A |
Deflecting Yokes for Cathode Ray Tubes |
|
ECA 260 |
Tape-Wound Toroidal Cores |
|
ECA 268 |
Infrared-Filter Transmission |
|
ECA 272 |
Voltage Jump for Voltage Regulator and Reference Tubes, Definition and Measurement of |
|
ECA 277 |
Designation System for Metal Electron Tube Shells |
|
ECA 293 |
Sonic Wire Delay Lines |
|
ECA 305 |
Display Storage Tube Nomenclature |
|
ECA 324-A |
Color Picture Tubes, Registered Screen Dimensions for |
|
ECA 356 |
Definitions and Terminology in Connection with Record Changers and Manual Phonographs |
|
ECA 369 |
Midget I.F. Shields (.75 inch Square) (Reaffirmation of REC-144) |
|
ECA 377-1 |
Parts List Supplement to RS-377, |
|
ECA 393 |
Core Laminations, Vertical and Horizontal Channel Frames for Transformers for Radio and TV Receivers |
|
ECA 402 |
Liquid Rosin Fluxes |
|
GEIA 408 |
Interface between Numerical Control Equipment and Data Terminal Equipment Employing Parallel Binary Data Interchange-Errata - August 1973 |
|
GEIA 431 |
Electrical Interface between Numerical Control and Machine Tools |
|
ECA 448-2 |
Test Standard for Electromechanical Components Environmental Effects of Machine Soldering |
|
ECA 454 |
Fixed Paper and Film-Paper Dielectric Capacitors with Non-PCB Impregnants for Alternating Current Applications |
|
ECA 502-A |
Recommended Practice for Measurement of X-Radiation from Non-Raster-Scanned Direct-View Cathode Ray Tubes |
|
ECA 505 |
Packing for Return CRT Glass Component Packaging Material |
|
GEIA 511 |
Manufacturing Message Specification - Service Definition and Protocol (ISO 9506)-Errata - April 1989 |
|
ECA 513 |
EIA/NARM Standard Low Profile Relays for Circuit Board Mounting |
|
ECA 520AAAC |
Detail Specification for Switch, Non-Sensitive, Pushbutton 15.88 mm of Mounting Hole |
|
ECA 520AAAF |
Detail Specification for Pushbutton Switches, 19 mm x 29 mm, 10 Ampere |
|
ECA 520EAAA |
Detail Specification for Surface Mountable Dual In-Line Switches of Certified Quality |
|
ECA 520EAAC |
Detail Specification for Dual In-Line Switches of Certified Quality |
|
ECA 527 |
Screen Definition for Color Picture Tubes |
|
ECA 535ACAA |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode |
|
ECA 535BAAB |
Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range |
|
ECA 540A000-A |
Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment |
|
ECA 540BA00 |
Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1 |
|
ECA 540CAAC-A |
Detail Specification for 2 Pole, 10 A Relay Sockets |
|
ECA 540DA00 |
Blank Detail Specification for Dual In-Line Sockets for Use in Electronic Equipment |
|
ECA 540DAAA-A |
Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment |
|
ECA 540DB00 |
Blank Detail Specification for Decoupling Capacitor Dual In-Line Package Sockets |
|
ECA 540FAAA |
Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAD |
Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540GAAA |
Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
|
ECA 540H000 |
Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
|
ECA 550 |
75 Ohm Type FD Connector Interfaces, Rating, and Characteristics |
|
ECA 567-A |
VHDL Hardware Component Modeling and Interface Standard |
|
ECA 580A000 |
Sectional Specification for Fixed Chip Capacitors with Metallized Electrodes and Polyethylene-Terephthalate Dielectric for Use in Electronic Equipment |
|
ECA 580BA00 |
Blank Detail Specification: Fixed Metallized Electrode Film Dielectric AC Capacitors |
|
ECA 700A0AA |
Detail Specification for 1.27 mm Pitch, Ribbon Contact, Trapezoidal Shaped, Shielded I/O Connector |
|
ECA CB 5 |
Recommended Test Procedure for Semiconductor Thermal Dissipating Devices |
|
ECA CB 5-1 |
Recommended Test Procedure for Semiconductor Thermal Dissipating Devices-Addendum to CB5 |
|
ECA CB16 |
Integrated Passive Device (IPD) Definitions |
|
CEA CEA-2007 |
QoS Priority Groupings for 802.1Q |
|
CEA CEA-2010 |
Standard Method of Measurement for Powered Subwoofers |
|
CEA CEA-600.38 |
Power Line/ Radio Frequency Symbol-Encoding Sublayer |
|
CEA CEA-600.46 |
Node Network Layer Specification |
|
CEA CEA-633.37 |
Symbol-Encoding Sublayer Physical Layer Conformance |
|
CEA CEA-633.42 |
Node Data Link Layer Conformance |
|
CEA CEA-633.81 |
CAL Conformance Specification |
|
CEA CEA-762-A |
DTV Remodulator Specification |
|
CEA CEA-CEB15 |
CRT X-Radiation Compliance Training Manual |
|
GEIA CMB4-3 |
Computer Software Libraries |
|
GEIA CMB7-2 |
Guideline for Transitioning Configuration Management to an Automated Environment |
|
ECA EIA/ECA-932 |
SURGE WITHSTAND TELECOMMUNICATIONS FUSE QUALIFICATION SPECIFICATION |
|
ECA EIA/ECA-960 |
ASSEMBLY COMPONENT TRAY - ACT |
|
ECA EIA/ECA-963 |
THIN FILM ON CERAMIC RESISTOR ARRAY SPECIFICATION |
|
ECA EIA/IS-535BAAE |
Detail Specification for Low ESR Molded Tantalum Chip |
|
TIA EIA/TIA-455-170 |
FOTP-170 Cable Cutoff Wavelength of Single-Mode Fiber by Transmitted Power |
|
TIA EIA/TIA-472CB00 |
Blank Detail Specification for Fiber Optic Communications Cable for Indoor Use - Optical with Metallic Elements (Construction 2) ]-Partial Revision of EIA-472CXX0 |
|
TIA EIA/TIA-496-A |
Interface between Data Circuit-Terminating Equipment (DCE) and the Public Switched Telephone Network (PSTN) |
|
JEDEC EIA-306 |
Measurement of Small Signal HF, VHF, and UHF Power Gain of Transistors |
|
TIA EIA-455-102 |
FOTP-102 Water Pressure Cycling |
|
ECA EIA-540CAAD-A |
Detail Specification for 2 Pole, 5 A Relay Sockets |
|
GEIA EIA-591 |
Assessment of Quality Levels in PPM Using Variables Test Data |
|
ECA EIA-677 |
Specification for Small Form Factor Power Connector Pin Dimensions |
|
ECA EIA-704-2.1 |
Mechanically-Interlocked Component Packaging Flat Carrier-(Amendment No. 1 to Addendum No. 2 of EIA-704 |
|
TIA IEB13 |
Citizens Band Radio Service Format for Submission of FCC Type Acceptance Technical Data |
|
TIA IEB15 |
Provision of Premises Wiring for One and Two Line Voice Telephone Systems |
|
CEA IS-105.1 |
Decoder Interface Standard-Errata - August 1997 |
|
ECA IS-47 |
Contact Termination Finish Standard for Surface Mount Devices |
|
TIA IS-90 |
Recommended Minimum Standard for 800 MHz Dual-Mode Narrowband Analog Cellular Subscriber Units |
|
TIA IS-J-STD-781-SERIES 1 |
GMR-2 Series 01 (01.202) General Specifications - GMR-2 General System Requirements-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.004) Service Specifications - General on Supplementary Services-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.011) Service Specifications - Service Accessibility-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.008) Network Specifications - Organization of Subscriber Data-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.013) Network Specifications - Discontinuous Reception (DRX) in the GMR-2 System-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.015) Network Specifications - Technical Realization of Operator Determined Barring-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.022) Network Specifications - Functions Related to Mobile Earth Station (MES) in Idle Mode-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.050) Network Specifications - Transmission Planning Aspects of the Speech Service in the Public Satellite Mobile Network (PSMN) System |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.088) Network Specifications - Call Barring (CB) Supplementary Services |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.001) Radio Interface Physical Specifications - Physical Layer on the Radio Path |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.003) Radio Interface Physical Specifications - Channel Coding |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.004) Radio Interface Physical Layer Specifications - Modulation |
|
TIA IS-J-STD-781-SERIES 6 |
GMR-2 Series 06 (06.001) Speech Coding Specifications: Basic Rate Speech: Basic Rste Speech Processing Functions |
|
JEDEC JEP142 |
Obtaining and Accepting Material for Use in Hybrid/MCM Products |
|
JEDEC JEP152 |
DDR2 DIMM Clock Skew Measurement Procedure Using A Clock Reference Board |
|
JEDEC JESD12-4 |
Method of Specification of Performance Parameters for CMOS Semicustom Integrated Circuits |
|
JEDEC JESD12-5 |
Design for Testability Guidelines |
|
JEDEC JESD28-1 |
N-Channel MOSFET Hot Carrier Data Analysis |
|
JEDEC JESD282B.01 |
Silicon Rectifier Diodes-Revision of EIA-JESD282-B |
|
JEDEC JESD51-3 |
Low Effective Thermal Conductivity Test Board for Leaded Surface Mount Packages |
|
JEDEC JESD531 |
Thermal Resistance Test Method for Signal and Regulator Diodes (Forward Voltage, Switching Method)-Reaffirmation of ANSI/EIA-531-1986, Previously Published as IS-13; Replaces JEDEC JEP 90 |
|
JEDEC JESD59 |
Bond Wire Modeling Standard |
|
JEDEC JESD64-A |
Standard for Description of 2.5 V CMOS Logic Devices with 3.6 V CMOS Tolerant Inputs and Outputs |
|
JEDEC JESD82-25 |
Definition of the SSTUB32866 1.8 V Configurable Registered Buffer with Parity Test for DDR2 RDIMM Applications |
|
JEDEC JESD82-4B |
Definition of the SSTV16859 2.5 V 13-Bit to 26-Bit SSTL_2 Registered Buffer for Stacked DDR DIMM Applications |
|
JEDEC JESD82-5 |
Description of a 3.3 V, Zero Delay Clock Distribution Device Compliant with JESD21-C, PC133 Registered DIMM Specification |
|
TIA PN 3-0070-1 |
Packet Switched Video Telephony Services-To be published as TIA-924 |
|
TIA PN 3-0071-AD1[E]-1 |
Enhanced Subscriber Privacy for cdma2000-To be published as TIA-925-1[E] |
|
TIA PN 3-0174-000 |
cdma2000 Wireless Local Area Network Interworking-To be published as TIA-1050-000 |
|
ECA SP 5053 |
Resistors, Rectangular, Surface Mount, Precision-To be published as ANSI/EIA-576-A |
|
ECA SP 5107-A-1 |
Test Methology for Assessing the Performance of Compliant Contact Terminations Used as Free Standing Contacts or in Electrical Connections and Sockets-To be published as ANSI/EIA/ECA-364-1002 |
|
TIA SP3-4522 |
Recommended Minimum Performance Standards of Personal Access Communications System (PACS) Subscriber Units-Comment Period Expires: August 12, 2002; |
|
ECA TEB 21 |
CRT Considerations for Raster Dot Alpha Numeric Presentations |
|
ECA TEB 22 |
Magnetic Deflection Yokes |
|
ECA TEB 26 |
1976 CIE-UCS Chromaticity Diagram with Color Boundaries |
|
ECA TEB23-A |
Spot Pulse Width and Repetition Rate in Raster Dot Alpha-Numeric CRT Presentations for Rectangular Pulses |
|
JEDEC TENTSTD12 |
Suggested Standard for Selenium Surge Suppressors |
|
ECA TEP 173 |
Quality Control of X-Radiation Emitted from High Voltage Rectifier and Shunt Regulator Receiving Tubes, Recommended Practice for |
|
ECA TEP 196 |
Cathode Ray Tube X-Radiation Round Robin Procedures Report of the JT-32 Committee |
|
ECA TEP105-12 |
Test Method for Tube Face Reflectivity |
|
ECA TEP131 (COLOR) |
Criteria for Bulb Parts for Color Picture Tubes |
|
TIA TIA/EIA/IS-713 |
Narrowband Analog Air Interface Compatibility Standard for 1.9 GHz Band on IS-91-A |
|
TIA TIA/EIA/IS-786 |
Automatic Code Gapping |
|
TIA TIA/EIA/IS-94 |
Mobile Station - Land Station Compatibility Specification for Analog Cellular Auxiliary Personal Communications Service |
|
TIA TIA/EIA-102.BABC |
Project 25 Vocoder Reference Test-Upgrade and Revision of TIA/EIA/IS-102.BABC |