|
TIA TIA/EIA-136-010-C |
TDMA Third Generation Wireless Optional Mobile Station Facilities-Revision of TIA/EIA-136-010-B |
|
TIA TIA/EIA-136-033-A |
TDMA Third Generation Wireless - R-UIM File Structure-Revision of TIA/EIA-136-033 |
|
TIA TIA/EIA-136-150-B |
TDMA Third Generation Wireless - Analog Voice Channel |
|
TIA TIA/EIA-136-336 |
TDMA Third Generation Wireless; Packet-Data Service - Mobility Management |
|
TIA TIA/EIA-136-340 |
TDMA Third Generation Wireless; Packet-Data Service - 136HS Outdoor Overview |
|
TIA TIA/EIA-136-360 |
TDMA Third Generation Wireless Packet Data Service - 136HS Indoor Overview |
|
TIA TIA/EIA-136-362 |
TDMA Third Generation Wireless - Packet Data Service - 136HS Indoor RLC/MAC |
|
TIA TIA/EIA-136-630 |
TDMA Cellular/PCS Broadcast Teleservice Transport - Broadcast Air-Interface Transport Service (BATS) |
|
TIA TIA/EIA-136-700-D |
TDMA Third Generation Wireless - Introduction to Teleservices-Revision of TIA/EIA-136-700-C |
|
TIA TIA/EIA-136-710-C |
TDMA Third Generation Wireless - Short Message Service - Cellular Messaging Teleservice-Revision of TIA/EIA-136-710-B |
|
TIA TIA/EIA-136-711 |
TDMA Third Generation Wireless - GSM Hosted SMS Teleservice (GHOST) |
|
TIA TIA/EIA-136-750 |
TDMA Cellular/PCS General UDP Transpoort Service (GUTS) |
|
TIA TIA/EIA-136-940 |
TDMA Third Generation Wireless Capacity and Performance Characteristics of UWC-136 |
|
TIA TIA/EIA-136-972 |
TDMA Third Generation Wireless - Enhanced General Packet-Data Service (EGPRS-136) Stage-2 Description |
|
TIA TIA/EIA-664-501-A |
Wireless Features Description: Call Delivery-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-503-A |
Wireless Features Description: Call Forwarding - Default-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-504-A |
Wireless Features Description: Call Forwarding - No Answer-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-509-A |
Wireless Features Description: Calling Number Identification Restriction-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-510-A |
Wireless Features Description: Conference Calling-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-514-A |
Wireless Features Description: Mobile Access Hunting-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-516-A |
Wireless Features Description: Preferred Language-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-520-A |
Wireless Features Description: Subscriber PIN Access-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-526-A |
Wireless Features Description: Calling Number Presentation-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-528-A |
Wireless Features Description: Data Privacy-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-701-A |
Wireless Features Description: Mobile Station Functionality-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-802-A |
Wireless Features Description: Subscriber Confidentiality-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-712 |
Recommended Minimum Standards for 800-MHz Cellular Base Stations-Replaces EIA IS-20-A |
|
TIA TIA/EIA-732-1023 |
Cellular Digital Packet Data (CDPD) System Specification Accounting Interoperability |
|
TIA TIA/EIA-732-1025 |
Cellular Digital Packet Data (CDPD) System Specification CS CDPD Modem Bank Management Protocol |
|
TIA TIA/EIA-732-1026 |
Cellular Digital Packet Data (CDPD) System Specification CS CDPD Accounting Service and Protocol |
|
TIA TIA/EIA-732-301 |
Cellular Digital Packet Data (CDPD) System Specification Subprofile Concepts |
|
TIA TIA/EIA-732-403 |
Cellular Digital Packet Data (CDPD) System Specification Mobile Data Link Protocol |
|
TIA TIA/EIA-732-408 |
Cellular Digital Packet Data (CDPD) System Specification Minimum Performance Standards for CDPD Mobile Data Base Stations |
|
TIA TIA/EIA-732-600 |
Cellular Digital Packet Data (CDPD) System Specification Network Support Services |
|
TIA TIA/TR-1028 |
TR 61280-7 Fibre Optic Communication System Design Guides – Part 7: Statistical Calculation of Chromatic Dispersion |
|
TIA TIA/TR-1029 |
TR 61282-3 Fibre Optic Communication System Design Guides – Part 3: Calculation of Polarization Mode Dispersion |
|
TIA TIA-1040.1.02 |
Regenerative Satellite Mesh-A (RMS-A) Air Interface - Physical Layer Specification - Part 2: Frame Structure |
|
TIA TIA-1053 |
Broadcast/Multicast Service Security Framework |
|
TIA TIA-1062 |
Telephony Aspects of MLTS and Packetbased Equipment, including VoIP 1544 kbps Interface Requirements for Packet-based Gateways |
|
TIA TIA-123-A |
Telecommunications – Multiline Terminal Systems – North American Test Plan for Multivendor QSIG Interoperability Testing |
|
TIA TIA-41.510-E |
Part 510: Wireless Radiotelecommunications Intersystem Operations – X.25 Transport Signaling Protocols |
|
TIA TIA-41.520-E |
Part 520: Wireless Radiotelecommunications Intersystem Operations – TCAP Application Signaling Protocols |
|
TIA TIA-41.590-E |
Part 590: Wireless Radiotelecommunications Intersystem Operations – MAP Compatibility Signaling Protocols |
|
TIA TIA-455-44-B |
FOTP-44 Refractive Index Profile, Refracted Ray Method-Withdrawn May 2003; Replaced by TIA-455-176-A:2003 |
|
TIA TIA-504-A |
Telecommunications - Telephone Terminal Equipment - Magnetic Field and Acoustic Gain Requirements for Handset Telephones Intended for Use by the Hard of Hearing |
|
TIA TIA-573A000-A |
Sectional Specification for Field-Portable Optical-Fiber Cleaving Tools |
|
TIA TIA-6200000 |
Generic Specification for Passive Optical Branching Devices |
|
TIA TIA-620AA00 |
Blank Detail Specification for Single-Mode Fiber Optic Branching Devices for Outside Plant Applications |
|
TIA TIA-678-A |
Data Transmission Systems and Equipment - Serial Asynchronous Automatic Dialing and Control for Character Mode DCE on Wireless Data Services |
|
TIA TIA-825-A |
A Frequency Shift Keyed Modem for Use on the Public Switched Telephone Network |
|
TIA TIA-868 |
TIA/EIA-41-D Network Enhancements to Support CDMA SIM Roaming to GSM |
|
TIA TIA-889-A |
Minimum Performance Specification for Text Telephone Signal Detector and Text Telephone Signal Regenerator-See TIA-889-A [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-894 |
Selectable Mode Vocoder Minimum Performance Specification - Option 56 for Wideband Spread Spectrum Digital Systems-See TIA-894 [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-902.BAAE-A |
Wideband Air Interface – Logical Link Control (LLC) Layer Specification |
|
TIA TIA-902.BAEB |
Wideband Air Interface Packet Data Specification (PDS) - Public Safety Wideband Data Standards Project – Digital Radio Technical Standards |
|
TIA TIA-902.CAAA |
Radio Communications – Public Safety Wideband Data Equipment – Performance Measurement Procedures |
|
TIA TIA-915-A |
CDMA Card Application Toolkit (CCAT) |
|
TIA TIA-917 |
Wireless Priority Service Enhancements for CDMA Systems |
|
TIA TIA-926 |
Circuit Switched Video Conferencing Services |
|
TIA TIA-937 |
Open Service Access (OSA); Application Programming Interface (API) |
|
TIA TIA-945 |
MAP Support of Authentication and Key Agreement (AKA)-(Contains Color) |
|
TIA TSB108 |
Implementation Aspects of R-DATA Encryption in TIA/EIA-136 |
|
TIA TSB114 |
Wireless Network Recommendation for Emergency Message Broadcast (EMB) |
|
TIA TSB-138 |
TDMA Third Generation Wireless - Clarification of TIA/EIA/IS-823-A |
|
TIA TSB-146 |
Telecommunications - IP Telephony Infrastructures - IP Telephony Support for Emergency Calling Service |
|
TIA TSB-147 |
Telecommunications - Multiline Terminal Systems - Comparison of PBX Transmission Requirements in Standards TIA-464-C and ETSI ES 201 168 Version 1.1 |
|
TIA TSB-150 |
Private Land Mobile Radio Two-Way Portable Equipment RF Exposure (EME) Test Report Guidelines |
|
TIA TSB16-A |
Assignment of Access Overload Classes in the Cellular Telecommunications Services-Revision of TSB16 |
|
TIA TSB2000 |
Capabilities Requirements Mapping for cdma2000 Standards |
|
TIA TSB-38 |
Test Procedure for Evaluation of 2-Wire 4-Kilohertz Voiceband Duplex Modems |
|
TIA TSB79 |
Short Message Services for Wideband Spread Spectrum Systems |
|
TIA TSB-87-1010 |
Cellular Digital Packet Data System Specification - Part 1010 Intermediate System |
|
TIA TSB-87-1014 |
Cellular Digital Packet Data System Specification - Part 1014 Application-Entity Look-Up Directory Profile |
|
TIA TSB-87-1020 |
Cellular Digital Packet Data System Specification - Part 1020 CDPD Domain Name System |
|
TIA TSB-87-2011 |
Cellular Digital Packet Data System Specification - Part 2011 Mobile Data Base Station |
|
TIA TSB-87-3011 |
Cellular Digital Packet Data System Specification - Part 3011 Administration of Unique Identifiers Name and Numbering Plan |
|
TIA TSB92 |
Report on EME Evaluation for RF Cabinet Emissions under FCC MPE Guidelines |
|
ECA 162 |
Ceramic Based Printed Circuits, Test Standards for |
|
TIA 166 |
Miniature Waveguide Flanges, Unpressurized Contact Type (CMR 90 to CMR 284) |
|
ECA 186-7E |
Passive Electronic Component Parts, Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency, 10 to 55 Hertz) |
|
ECA 186-8E |
Passive Electronic Component Parts, Test Methods for; Method 8: Vibration, High Frequency |
|
ECA 257 |
Mercury Warning Label |
|
ECA 270 |
Tools, Crimping, Solderless Wiring Devices - Recommended Procedures for User Certification |
|
ECA 287 |
Mercury Content Label |
|
ECA 300 |
3 |
|
ECA 339 |
Layer-To-Layer Adhesion of Magnetic Tape, Recommended Test Method |
|
ECA 348 |
Magnetic Field Polarity, Including Definitions and Determination of Polarity |
|
ECA 376-1 |
Parts List Supplement to RS-376, |
|
ECA 386 |
Phonograph Rumble, Recommended Measurement Method for |
|
ECA 417-A |
Crystal Outlines |
|
ECA 448-20 |
Method 20 Test Method for Electromechanical Components Test Method for Lens Face Touch Temperature |
|
ECA 448-22 |
Resistance to Soldering Heat, Soldering Method |
|
ECA 448-24 |
Test Method 24 Solid State Switch Transfer Tests |
|
TIA 455-65 |
FOTP-65 Optical Fiber Flexure Test |
|
ECA 520AA00 |
Blank Detail Specification for Special-Use Pushbutton Switches of Certified Quality |
|
ECA 520EA00 |
Blank Detail Specification for In-Line Switches |
|
ECA 520FAAA |
Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 12 Positions Maximum |
|
ECA 520FAAB |
Detail Specification for Rotary Switches of Certified Quality (Low Current Rating) 16 Positions Maximum |
|
ECA 535ABAC |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode |
|
ECA 535ABAD |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode |
|
ECA 535ACAC |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode |
|
ECA 540AB00 |
Blank Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment |
|
ECA 540ABAA |
Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635 mm (.025 |
|
ECA 540AC00 |
Blank Detail Specification for Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with |
|
ECA 540AD00 |
Blank Detail Specification for Adaptor - Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment |
|
ECA 540BAAA-A |
Detail Specification for Mechanically Actuated (Zero and Low Insertion Force) Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1 in X 0.1 in) Spacing for Use in Electronic Equipment |
|
ECA 540BAAC |
Detail Specification Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment |
|
ECA 540FAAB |
Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
|
GEIA 601-A |
General Procedure for Capability Approval of Electronic Components |
|
ECA 700A0AB |
Detail Specification for 1.27 mm Pitch, 68 Circuit Memory Card Interconnect System |
|
ECA 700C000 |
Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA ACH-2000 |
Registered New Technologies for Automated Component Handling |
|
CEA CEA-2002 |
Test Procedure for Powerline Carrier Technology |
|
CEA CEA-2005 |
AV Adapter to Connect Ethernet and 1394 Devices |
|
CEA CEA-2009-A |
Performance Specification for Public Alert Receivers |
|
CEA CEA-560 |
Standard Method of Measurement for Compact Disc Players |
|
CEA CEA-600.42 |
Node Medium Access Control Sublayer |
|
CEA CEA-600.82 |
CAL Context Description |
|
CEA CEA-633.31 |
Power Line Physical Layer Conformance Specification |
|
CEA CEA-633.34 |
Infrared Physical Layer Conformance |
|
CEA CEA-721.1 |
Generic Common Application Language (Generic CAL) Specification |
|
CEA CEA-721.2 |
Generic CAL Context Description |
|
CEA CEA-721.3 |
Node Application Layer Specification |
|
CEA CEA-721.4 |
Generic Common Application Language Quality of Service |
|
CEA CEA-775.2 |
Service selection information for digital storage media interoperability |
|
CEA CEA-CEB3 |
Recommended Practice for Camcorder Specifications |
|
ECA EIA/ECA-887-A |
Thin Film Resistor Network Specification |
|
ECA EIA/ECA-958 |
SURFACE MOUNT COMMON MODE CHOKE QUALIFICATION SPECIFICATION |
|
ECA EIA/ECA-959 |
THIN FILM RC SPECIFICATION |
|
ECA EIA/ECA-962 |
LOW VOLTAGE SUPPLEMENTAL FUSE QUALIFICATION SPECIFICATION |
|
GEIA EIA/IS-108 |
CDIF - Transfer Format General Rules for Syntaxes and Encodings-Interim Standard |
|
GEIA EIA/IS-118 |
CDIF - Integrated Meta-Model - Presentation Location and Connectivity Subject Area-Interim Standard |
|
TIA EIA/TIA-455-30B |
FOTP-30 Frequency Domain Measurement of Multimode Optical Fiber Information Transmission Capacity |
|
TIA EIA/TIA-455-49A |
FOTP-49 Procedure for Measuring Gamma Irradiation Effects in Optical Fiber and Optical Cables |
|
ECA EIA-364-101 |
TP-101 Attenuation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems |
|
ECA EIA-448-19A |
Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using a Vapor Phase System |
|
TIA EIA-455-66 |
FOTP-66 Test Method for Measuring Relative Abrasion Resistance of Optical Waveguide Coating and Buffers-No replacement |
|
ECA EIA-540CAAB |
Detail Specification on Relay Sockets - 5 A for Balanced Armature Relay |
|
ECA EIA-540CAAE-A |
Detail Specification for 3 Pole, 10 A Relay Sockets |
|
ECA EIA-540HA00 |
Blank Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
|
ECA EIA-616-A |
Detail Specification for 2 Millimeter, Two-Part Connectors for Use with Printed Boards and Backplanes |
|
ECA EIA-773 |
Check List for Document Development and Revision |
|
ECA EIA-800 |
Integrated Passive Device (IPD) Chipscale Package Design Guidelines |
|
TIA IEB5 |
Tutorial Paper on Signal Quality at Digital Interface |
|
ECA IS-36 |
Chip Capacitors, Multi-Layer (Ceramic Dielectric) |
|
ECA IS-43AD |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Plenum Cable |
|
ECA IS-757 |
Visual and Mechanical Inspection for Molded SMT Solid Tantalum Capacitors |
|
ECA IS-84 |
Interim Detail Specification for 2.5 mm Two Part Connector for Use in Electronic Equipment |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.002) Service Specifications - Bearer Services (BS) Supported by a GMR-2 Public Satellite Mobile Network (PSMN)-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.041) Service Specifications - Operator Determined Barring (ODB)-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.084) Service Specifications - Multiparty (MPTY) Supplementary Services-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.007) Network Specifications - Restoration Procedures-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.045) Network Specifications - Technical Realization of Facsimile Group 3 Transparent-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.083) Network Specifications - Call Waiting (CW) and Call Hold (HOLD) Supplementary Services - Stage 2-ETSI |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.004) Radio Interface Protocol Specifications - Layer 1 General Requirements |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.005) Radio Interface Protocol Specifications - Data Link Layer General Aspects |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.006) Radio Interface Protocol Specifications - GMR-2 Mobile Earth Station-Network Interface: Data Link (DL) Layer Specifications |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.008) Radio Interface Protocol Specifications - Mobile Radio Interface Layer 3 Specifications |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.083) Radio Interface Protocol Specifications - Call Waiting (CW) and Call Holding (HOLD) Supplementary Services |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.008) Radio Interface Physical Layer Specifications - Radio Subsystem Link Control |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.010) Radio Interface Physical Layer Specifications - Radio Subsystem Synchronization |
|
JEDEC JEP115 |
Power MOSFET Electrical Dose Rate Test Method |
|
JEDEC JEP145 |
Guideline for Assessing the Current-Carrying Capability of the Leads in a Power Package System |
|
JEDEC JEP65 |
Verification of Maximum Ratings of Power Transistors, Test Procedures for |
|
JEDEC JEP69-B |
Preferred Lead Configurations for Field-Effect Transistors |
|
JEDEC JEP95 BOOK 3 MO SECTIONS |
Book Three Registered and Standard Outlines for Solid State and Related Products-Revisions: 04/28/2000 to 07/14/2004 ***INDEX ONLY*** |
|
JEDEC JEP95 BOOKS 1-3/95-1 |
Registered and Standard Outlines for Solid State and Related Products-Revisions: 04/28/2000 to 07/14/2004 ***INDEX ONLY*** |
|
JEDEC JESD11 |
Chip Carrier Pinouts Standardized for CMOS 4000, HC and HCT Series of Logic Circuits |
|
JEDEC JESD14 |
Semiconductor Power Control Modules |
|
JEDEC JESD18-A |
Standard for Description of Fast CMOS TTL Compatible Logic |
|
JEDEC JESD24-8 |
Method for Repetitive Inductive Load Avalanche Switching-Addendum to JEDEC JESD 24 |
|
JEDEC JESD4 |
Definition of External Clearance and Creepage Distances of Discrete Semiconductor Packages for Thyristors and Rectifier Diodes |
|
JEDEC JESD51-6 |
Integrated Circuit Thermal Test Method Environmental Conditions - Forced Convection (Moving Air) |
|
JEDEC JESD54 |
Standard for Description of 54/74ABTXXX and 74BCXXX TTL-Compatibility BiCMOS Logic Devices |
|
JEDEC JESD8-8 |
Stub Series Terminated Logic for 3.3 Volts (SSTL-3) |
|
TIA PN 3-4643 |
Medium-Speed (up to 14 Mbps) Power Line Communications (PLC) Modems using Windowed OFDM-To be published as TIA-1113 |
|
TIA SP 3-4196-RF1 |
High Frequency Radio Facsimile (ANSI/TIA/EIA-668-A-98)-To be reaffirmed as TIA-668-A |
|
ECA SP 4984 |
Surface Mount Aluminum Electrolytic Chip Capacitor with Polymer Cathode-To be published as ANSI/EIA/ECA-955 |
|
TIA SP3696 |
Accelerated Measurement of BER and Q-Factor in Digital Optical Transmission Systems Using the Sinusoidal Interference Method-Comment Period Expires: July 26, 2000; TIA/EIA-526-8 |
|
ECA SP3702 |
Detail Specification for High Density Blade Connector (396/556 Pin Contact Families)-Comment Period Expires: September 20, 1999; EIA-700A0AG |
|
EIA SP-4951 |
Surge Withstand Telecommunications Fuse Qualification Specification-Comment Period Expires: September 30, 2002; ANSI/EIA-932 |
|
ECA TEB 24 |
Effect of Pulse Shape in Raster Dot Alpha-Numeric CRT Presentations on Spot Luminance and Luminance Distribution |
|
ECA TEB 25 |
Survey of Data-Display CRT Resolution Measurement Techniques |
|
ECA TEP 137 |
Design-Maximum Rating System for Electron Tubes |
|
ECA TEP 138 |
Noise Figure Testing of RF Amplifier Tubes (TEP 38) |
|
ECA TEP 161 |
Typical Characteristics of Photosensitive Surfaces |
|
ECA TEP 167 |
Measurement of X-Radiation from Receiving Tubes, Recommended Practice for |
|
ECA TEP 189 |
Electron Tube Radioactivity Calculations in Microcuries/Tube |
|
ECA TEP105 |
Industrial Cathode Ray Tube Test Methods |
|
ECA TEP105-14 |
Measurement of Phosphor Persistence of CRT Screens |
|
ECA TEP105-17 |
MTF Test Method for Monochrome CRT Display Systems |
|
ECA TEP105-8 |
Raster Response Measurement for Monochrome Cathode Ray Tubes |
|
ECA TEP106-B |
Worldwide Type Designation System for TV Picture Tubes and Monitor Tubes |
|
TIA TIA/EIA/IS-69.5 |
Enhanced Digital Access Communications System IMBE Implementation |
|
TIA TIA/EIA/IS-789-A |
Electrical Specification for the Portable Phone to Vehicle Interface |
|
TIA TIA/EIA/IS-790 |
Latch Specification for the Portable Phone to Vehicle Interface |
|
TIA TIA/EIA-136-034-A |
TDMA Third Generation Wireless - R-UIM ME Interface Procedures-Revision of TIA/EIA-136-034 |
|
TIA TIA/EIA-136-036 |
TDMA Third Generation Wireless - Personalization of Mobile Equipment (ME) |
|
TIA TIA/EIA-136-122-B |
TDMA Third Generation Wireless - Digital Control Channel Layer 2 |
|
TIA TIA/EIA-136-240 |
TDMA Third Generation Wireless - Adaptive Multi-Rate Speech Codec Minimum Performance Requirements |
|
TIA TIA/EIA-136-280-D |
TDMA Third Generation Wireless - Base Stations Minimum Performance-Revision of TIA/EIA-136-280-C |
|
TIA TIA/EIA-136-332 |
TDMA Third Generation Wireless - Packet Data Service - 136+ Medium Access Control |
|
TIA TIA/EIA-136-333 |
TDMA Third Generation Wireless - Packet Data Service – Logical Link Control |
|
TIA TIA/EIA-136-370-B |
TDMA Third Generation Wireless Enhanced General Packet-Data Service (EGPRS-136) |
|
TIA TIA/EIA-136-720-C |
TDMA Third Generation Wireless - Over-the-Air Activation Teleservice (OATS)-Revision of TIA/EIA-136-720-B |
|
TIA TIA/EIA-136-932 |
TDMA Third Generation Wireless - Packet Data Services - Stage 2 Description |
|
TIA TIA/EIA-455-169-A |
FOTP-169 Chromatic Dispersion Measurement of Single-Mode Optical Fibers by the Phase-Shift Method-Withdrawn May 2003; Replaced by ANSI/TIA-455-175-B |
|
TIA TIA/EIA-455-51A |
FOTP-51 Pulse Distortion Measurement of Multimode Glass Optical Fiber Information Transmission Capacity-Revision of EIA-455-51 |
|
TIA TIA/EIA-664-100-A |
Wireless Features Description: General Background and Assumptions-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-506-A |
Wireless Features Description: Call Transfer-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-513-A |
Wireless Features Description: Message Waiting Notification-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-517-A |
Wireless Features Description: Priority Access and Channel Assignment-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-525-A |
Wireless Features Description: Asynchronous Data Service-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-527-A |
Wireless Features Description: Calling Name Restriction-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-531-A |
Wireless Features Description: Network Directed System Selection-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-601-A |
Wireless Features Description: Short Message Delivery Point-to-Point Bearer Service-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-732-1024 |
Cellular Digital Packet Data (CDPD) System Specification Circuit Switched Cellular Digital Packet Data |
|
TIA TIA/EIA-732-311 |
Cellular Digital Packet Data (CDPD) System Specification Lower Layer Subprofiles |
|
TIA TIA/EIA-732-400 |
Cellular Digital Packet Data (CDPD) System Specification Overview of the Airlink |
|
TIA TIA/EIA-732-404 |
Cellular Digital Packet Data (CDPD) System Specification Subnetwork Dependent Convergence Protocol |
|
TIA TIA/EIA-732-700 |
Cellular Digital Packet Data (CDPD) System Specification Network Management |
|
TIA TIA-1001 |
Transport of TIA-825-A Signals over IP Networks |
|
TIA TIA-1009 |
ME Personalization Mechanism for cdma2000 Spread Spectrum Systems |
|
TIA TIA-1032.000 |
Presence Service: Architecture and Functional Description Overview |
|
TIA TIA-1040.1.07 |
Regenerative Satellite Mesh-A (RMS-A) Air Interface - Physical Layer Specification - Part 7: Synchronization |
|
TIA TIA-1044 |
Signaling Conformance Test Specification for Over-the-Air Service Provisioning |
|
TIA TIA-1055 |
MAP Enhancements to Support Enhanced Message Waiting Notification (MWN) |
|
TIA TIA-1057 |
Telecommunications IP Telephony Infrastructure Link Layer Discovery Protocol for Media Endpoint Devices |
|
TIA TIA-1092 |
Tunneling Support in Simple IP |
|
TIA TIA-41.512-E |
Part 512: Wireless Radiotelecommunications Intersystem Operations – IT/SS7 Transport Signaling Protocols-***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-41.690-E |
Mobile Application Part (MAP) - Operation Timer Values |
|
TIA TIA-492CA00 |
Blank Detail Specification for Class IVa Dispersion-Unshifted Single Mode Optical Fibers |
|
TIA TIA-492EA00 |
Blank Detail Specification for Class IVd Nonzero-Dispersion Single-Mode Optical Fiber for the 1550 nm Window |
|
TIA TIA-5150000 |
Generic Specification for Optical Fiber and Cable Splices |
|
TIA TIA-660 |
Uniform Dialing Procedures and Call Processing Treatment for Cellular Radio Telecommunications-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-664.803-A-1[E] |
Wireless Features Description: Network Services |
|
TIA TIA-664.804 |
Wireless Features Description – Enhanced Security Services |
|
TIA TIA-764 |
TIA/EIA-41-D Enhancements for Wireless Calling Name Feature Descriptions |
|
TIA TIA-902.BBAB |
Wideband Air Interface Isotropic Orthogonal Transform Algorithm (IOTA) Physical Layer Specifiaction Public Safety Wideband Data Standards Project - Digital Radio Technical Standards |
|
TIA TIA-902.BBAD |
Wideband Air Interface Isotropic Orthogonal Transform Algorithm (IOTA) Radio Channel Coding (CHC) Specification – Public Safety Wideband Data Standards Project – Digital Radio Technical Standards |
|
TIA TIA-904 |
Ka-Band Satellite Systems RF Compatibility Requirements |
|
TIA TIA-918 |
Signaling Conformance Standard for cdma2000 Wireless IP Networks |
|
TIA TSB103 |
PBX and KTS Support of Enhanced 911 Calling Service |
|
TIA TSB-1065 |
Broadband Data Standards Definition |
|
TIA TSB115 |
cdma2000 Wireless IP Architecture Based on IETF Protocols |
|
TIA TSB117 |
Clarification of DTX Received Handling in TIA/EIA-136 |
|
TIA TSB125 |
Guidelines for Maintaining Optical Fiber Polarity Through Reverse-Pair Positioning |
|
TIA TSB-130 |
Generic Guidelines for Connectorized Polarization Maintaining Fiber and Polarizing Fiber Cable Assemblies for Use in Telecommunications Applications |
|
TIA TSB-141 |
Polarization Dependent Loss: Measurement and Application Issues in Telecommunications-Contains Color |
|
TIA TSB-144 |
Adhesive Bubbles and Voids in Fiber Optic Components: Guidance, Issues, and Challenges |
|
TIA TSB-145 |
Reliability of Passive Fiber Optic Components: Failure Modes and Mechanisms of Fiber Optic Connectors |
|
TIA TSB-32-A |
Overall Transmission Plan Aspects for Telephony in a Private Network |
|
TIA TSB40-A |
Additional Transmission Specifications for Unshielded Twisted-Pair Connecting Hardware-Replaced by TIA/EIA-568 |
|
TIA TSB64 |
IS-41-B Support for Dual-Mode Wideband Spread Spectrum Mobile Stations |
|
TIA TSB67 |
Transmission Performance Specifications for Field Testing of Unshielded Twisted-Pair Cabling Systems |
|
TIA TSB70-A |
FSK Air Interface Common Message Protocol Cross-Reference |
|
TIA TSB83 |
IS-680 Optional Modems |
|
TIA TSB-87-2015 |
Cellular Digital Packet Data System Specification - Part 2015 Subscriber Identity Module Functional Characteristics |
|
TIA TSB-87-2016 |
Cellular Digital Packet Data System Specification - Part 2016 Multicast Perspectives |
|
ECA 153-B |
Molded and Dipped Mica Capacitors (Wire Lead Styles) |
|
ECA 183 |
Output Transformers for Radio Broadcast Receivers |
|
ECA 186-14E |
Passive Electronic Component Parts, Test Method for; Method 14: Panel Seal Test |
|
ECA 191-D |
Measurement of Direct Interelectrode Capacitances of Electron Tubes |
|
ECA 206-C |
Recommended Practice for Preparation of Basing or Terminal Diagrams |
|
ECA 212-A |
Numbering of Electrodes and Designation of Units in Electron Tubes |
|
ECA 213 |
Test Point Locations for Printed Wiring Assemblies |
|
ECA 217-A |
Wound Cut Cores |
|
TIA 219 |
Audio Facilities for Radio Broadcasting Systems |
|
TIA 225 |
Rigid Coaxial Transmission Lines 50 Ohms |
|
ECA 235-C |
Color Codes for Microwave Devices with Wire Leads Including Traveling Wave Tubes, Klystrons, Crossed Field Devices, Electromagnetic Leads |
|
ECA 239-A |
Electrical Rating Systems for Electron Tubes |
|
ECA 251-A |
Test to Determine the Temperature Rise as a Function of Current in Printed Conductors |
|
ECA 266-A |
Registered Screen Dimensions for Monochrome Picture Tubes |
|
ECA 301-B |
Electron Tubes, Type Designation System for |
|
TIA 304 |
Ridge Waveguides |
|
ECA 362 |
Tensile Properties of Magnetic Tape, Recm. Test Method |
|
ECA 376 |
Fixed Film Dielectric Capacitors in Metallic and Non-Metallic Cases for D.C. Application-ANSI C83.61-71 |
|
ECA 395-1 |
Polarized Aluminum Electrolytic Capacitors for Long Life (Type 1) and for General Purpose Application (Type 2)-ANSI C83.22A-75 |
|
ECA 399-A |
Dimensional Standard Coplanar Magnetic Tape Cartridge Type CP II (Compact Cassette) |
|
ECA 401 |
Paper, Paper/Film, Film Dielectric Capacitors for Power Semiconductor Applications |
|
ECA 403-A |
Precision Coaxial Connectors for CATV Application (75 Ohms) |
|
ECA 407-A |
Testing Procedures for Relays for Electrical and Electronic Equipment |
|
ECA 448-19 |
Method 19 Test Standard for Electromechanical Components Environmental Effects of Machine Soldering Using a Vapor Phase System |
|
ECA 448-23 |
Surface Mountable Switches, Qualification Test |
|
ECA 456-A |
Metallized Film Dielectric Capacitors for Alternating Current Application |
|
ECA 479-A |
Film-Paper, Film Dielectric Capacitors for 50/60 Hz Voltage Doubler Power Supplies |
|
ECA 4980000-A |
Generic Specification for Keyboard Switches of Certified Quality |
|
ECA 498A000 |
Sectional Specification for Full and Short Stroke Keyboards of Certified Quality |
|
ECA 498AA00 |
Blank Detail Specification for Keyboard Switches |
|
ECA 498AAAA |
Detail Specification for Short Stroke Keypads |
|
ECA 498B000 |
Sectional Specification for Touch Stroke Switch Panels of Certified Quality |
|
ECA 500-A |
Recommended Practice for Measurement of X-Radiation from Projection Cathode-Ray Tubes |
|
ECA 520DA00 |
Blank Detail Specification for Special-Use Toggle, Paddle and Rocker Switches of Certified Quality |
|
ECA 520EAAD |
Detail Specification for Dual-In-Line Package (DIP) Switches, Raised and Recessed Slide Actuated |
|
ECA 520F000-A |
Sectional Specification for Rotary Switches of Certified Quality (Low Current Capacity - 2 Amperes or Less) |
|
ECA 520FA00 |
Blank Detail Specification for Special-Use Rotary Switches of Certified Quality |
|
ECA 535ABAB |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode |
|
ECA 535ACAD |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode |
|
ECA 535BAAD |
Fixed Tantalum Chip Capacitor Style 1 Protected - Extended Capacitance Range-Replaces IS-29-86 |
|
ECA 540AA00 |
Blank Detail Specification for Chip Carrier Sockets for Leadless Type A, B or D Chip Carriers for Use in Electronic Equipment |