|
ECA 540AAAA |
Detail Specification for Chip Carrier Sockets for Leadless Type A (1.27 mm (.050 |
|
ECA 540ACAA |
Detail Specification for Chip Carrier (PCC) Family 1.27 mm (.050 Inch) Leadspacing |
|
ECA 540BAAB |
Detail Specification for Non-Mechanically Actuated Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1 |
|
ECA 540D000-A |
Sectional Specification for In-Line Package Sockets for Use in Electronic Equipment |
|
ECA 540DBAA |
Detail Specification for Decoupling Capacitor Dual In-Line Package Sockets for Use in Electronic Equipment |
|
ECA 540GA00 |
Blank Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
|
GEIA 548 |
Electronic Design Interchange Format Version 2 0 0 |
|
ECA 552 |
EIA Standards for Electron Tubes |
|
ECA 5670000 |
EIA Commercial Component Model Specification |
|
ECA 580A0AC |
Detail Specification for Fixed Metallized Polyethylene Terephthalate Film Dielectric DC Capacitors Axial Leaded |
|
ECA 699 |
Test Method for the Visual Inspection of Quartz Crystal Resonator Blanks |
|
ECA 700A0AD |
Detail Specification for the Interface of the 1.27 mm Pitch, Ribbon Contact (Leaf Spring), Trapezoidal Shaped, Self-Locking I/O Connector |
|
ECA 700AOAE |
Detail Specification for Trapezoidal Connectors with Nonremovable Ribbon Cable Contacts on 1.27mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
|
ECA 700B000 |
Sectional Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700BA00 |
Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700D000 |
Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates) |
|
ECA CB 4 |
Effect of the Wire Diameter on Wirewound Resistors Reliability |
|
ECA CB-14 |
Contact Lubrication |
|
ECA CB8 |
List of Approval Agencies, U.S. and Other Countries, Impacting Electronic Components and Equipment |
|
CEA CEA TECHNICAL PAPER |
Home Network Wireless Technologies Evaluation: Phase I Report Comparison of Technology Performance characteristics to Consumer Application Needs |
|
CEA CEA-2022 |
Digital STB Active Power Consumption Measurement |
|
CEA CEA-600.41 |
Description of the Data Link Layer |
|
CEA CEA-600.43 |
Node Logical Link Control Sublayer |
|
CEA CEA-600.45 |
Node Network Layer Specification |
|
CEA CEA-633.32 |
Twisted Pair Physical Layer Conformance |
|
CEA CEA-633.46 |
Node Application Layer Conformance Specification |
|
CEA CEA-827 |
Sound Level Measurement- Vehicle Security System Sounding Devices |
|
CEA CEA-849-A |
Applications Profiles for EIA-775A Compliant DTVs |
|
CEA CEA-896-A |
Standard Method of Measurement for DVD-Video Players |
|
ECA EIA/ECA-674-A |
SPECIFICATION FOR DIMENSIONS AND CONNECTORS LOCATIONS OF SMALL FORM FACTOR 45 MILLIMETER (1.8 INCH) DISK DRIVE |
|
ECA EIA/ECA-676-A |
SPECIFICATION FOR PARALLEL 1.8 INCH DRIVE FORM FACTOR (78 MILLIMETER X 54 MILLIMETER |
|
ECA EIA/ECA-747-A |
Adhesive Backed Punched Plastic Carrier Taping of Singulated Bare Die and Other Surface Mount Components for Automatic Handling of Devices Generally Less Than 1.0 mm Thick |
|
ECA EIA/ECA-957-A |
IPD APPLICATION GUIDELINE (TERMINATION TECHNIQUES) |
|
GEIA EIA/IS-106 |
CDIF - CASE Data Interchange Format - Overview-Interim Standard |
|
GEIA EIA/IS-109 |
CDIF - Transfer Format Syntax SYNTAX.1-Interim Standard |
|
GEIA EIA/IS-111 |
CDIF - Integrated Meta-Model Foundation Subject Area-Interim Standard |
|
GEIA EIA/IS-116 |
CDIF Integrated Meta-model - State/Event Model Subject Area |
|
TIA EIA-195-C ERTA |
Electrical and Mechanical Characteristics for Terrestrial Microwave Relay System Antennas and Passive Reflectors |
|
ECA EIA-327-A |
Solvent Resistance of Applied Marking Materials |
|
ECA EIA-364-103 |
TP-103 Propagation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems |
|
ECA EIA-448-21A |
Test Standard for Electromechanical Components - Environmental Effects of Machine Soldering Using an Infrared System |
|
ECA EIA-540C000 |
Sectional Specification Sockets for Relays for Use in Electronic Equipment |
|
ECA EIA-540CA00 |
Blank Detail Specification on Relay Sockets |
|
CEA EIA-633.45 |
Network Layer Conformance Specification |
|
ECA EIA-743 |
Usable Screen Dimensions for Monochrome Display Tubes |
|
GEIA EIA-IS-103-A |
Library of Parameterized Modules (LPM)-Version 2 1 0 |
|
ECA IS-34 |
Leaded Surface Mount Resistor Networks Fixed Film |
|
ECA IS-43AB |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Non-Plenum Cable |
|
ECA IS-43AC |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Riser Cable |
|
ECA IS-43AE |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Nonplenum Cable |
|
ECA IS-43AG |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 6, Office Cable |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.003) Service Specifications - Teleservices Supported by a GMR-2 Public Satellite Mobile Network (PSMN)-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.009) Service Specifications - Security Aspects-ETSI |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.083) Service Specifications - Call Waiting (CW) and Call Hold (HOLD)-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.012) Network Specifications - Location Registration Procedures-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.084) Network Specifications - Multiparty Supplementary Services-ETSI |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.003) Radio Interface Protocol Specifications - GMR-2 Mobile Earth Station-Network Interface: Channel Structures and Access Capabilities |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.007) Radio Interface Protocol Specifications - Mobile Radio Interface Signaling Layer 3: General Aspects-ETSI |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.013) Radio Interface Protocol Specifications - Performance Requirements on the Mobile Radio Interface |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.002) Radio Interface Physical Specifications - Multiplexing and Multiple Access on the Radio Path |
|
TIA IS-J-STD-781-SERIES 5 |
GMR-2 Series 05 (05.005) Radio Interface Physical Layer Specifications - Radio Transmission and Reception |
|
JEDEC JEP126 |
Guideline for Developing and Documenting Package Electrical Models Derived from Computational Analysis |
|
JEDEC JEP78 |
Relative Spectral Response Curves for Semiconductor Infrared Detectors |
|
JEDEC JEP95 BOOK 1 |
Book One Registered and Standard Outlines for Solid State and Related Products-Revisions: 04/28/2000 to 07/14/2004 ***INDEX ONLY*** |
|
JEDEC JEP95 BOOK 1 SECTION 1 |
Section 1 Guide for Preparation of Drawings-Revisions: 04/28/2000 to 07/14/2004 ***INDEX ONLY*** |
|
JEDEC JESD22-B105C |
Lead Integrity |
|
JEDEC JESD22-B115 |
Solder Ball Pull |
|
JEDEC JESD286-B |
Standard for Measuring Forward Switching Characteristics of Semiconductor Diodes |
|
JEDEC JESD320-A |
Conditions for Measurement of Diode Static Parameters |
|
JEDEC JESD482-A |
List of Preferred Values for Use on Various Types of Small Signal and Regulator Diodes |
|
JEDEC JESD73 |
Description of 5 V Bus Switch Devices with TTL-Compatible Control Inputs |
|
JEDEC JESD79-4A |
Low Power Double Data Rate (LPDDR) SDRAM Specification |
|
JEDEC JESD82-7A |
Definition of the SSTU32864 1.8-V Configurable Registered Buffer for DDR2 RDIMM Applications |
|
JEDEC JESD89A |
Measurement and Reporting of Alpha Particle and Terrestrial Cosmic Ray-Induced Soft Errors in Semiconductor Devices |
|
TIA J-STD-034 |
(Trial Use Standard) Wireless Enhanced Emergency Services |
|
TIA PN 3-0219 |
Telecommunications Telephone terminal Equipment Measurement Procedures and performance Requirements for Handset Generated In-Band Magnetic Noise-Now a published standard - See TIA-1083 |
|
TIA PN 3-4350.120-RV3 |
Telephone Terminal Equipment - Handsfree Acoustics Performance Requirements for Analog Telephones-To be published as ANSI/TIA-470.120-C |
|
TIA SP 3-0169 |
Reliability of Fibre Optic Interconnecting Devices and Passive Components &Ndash; Part 2: Quantitative Assessment of Reliability Based on Accelerated Aging Test &Ndash; Temperature and Humidity-To be published as TIA-1069 |
|
TIA SP3-4384-RV5 |
Recommended Minimum Performance Standards for cdma2000 Spread Spectrum Base Stations-Comment Period Expires: September 12, 2002: TIA/EIA-97-E |
|
TIA SP4590 |
Detail Specification for Class IVa Dispersion-Unshifted Single-Mode Optical Fibers with Low Water Peak-Comment Period Expires: July 17, 2000; TIA/EIA-492.CAAB |
|
EIA SP5038 |
Enviromental Test Methodology for Assesing the performance of Electrical Connectors and Sockets Used in Controlled Environment Applications-Comment Period Expires: February 3, 2003; ANSI/EIA-364-1000.01, TS-1000.01A |
|
ECA TEP 123 |
Glossary of Terms Used in the Description of Glass Components and of Their Defects |
|
ECA TEP 192 |
Glossary of Cathode-Ray Tube Terms and Definitions |
|
ECA TEP 42 |
Application Notes for Pulse Magnetrons-. |
|
ECA TEP105-10 |
Contrast Measurement of CRT´s |
|
ECA TEP105-16-A |
Test Method for Phosphor Linearity |
|
ECA TEP105-9 |
Line Profile Measurements in Shadow Mask and Other Structured Screen Cathode Ray Tubes |
|
ECA TEP116-C |
Optical Characteristics of Cathode Ray Tube Screens |
|
ECA TEP146 |
Philosophy of Vibration Testing of Receiving Tubes (TEP46) |
|
ECA TEP195 |
Method for Calculating Refractive Gain for Color TV Picture Tube and Color Monitor Tube Screens |
|
ECA TEP197-A |
Preparation of X-Radiation Characteristic Curves for Cathode Ray Tubes |
|
TIA TIA/EIA/IS-104-A |
Personal Communications Service Descriptions for 1800 MHz |
|
TIA TIA/EIA/IS-680 |
Personal Base Station - Authorization and Call Routing Equipment Compatibility Standard |
|
TIA TIA/EIA/IS-812 |
TIA/EIA-41-D Message Segmentation |
|
TIA TIA/EIA/IS-837 |
TIA/EIA-41-D Based Network Enhancements for Answer Hold (AH) |
|
TIA TIA/EIA/IS-838 |
TIA/EIA-41-D Based Network Enhancements for User Selective Call Forwarding (USCF) |
|
TIA TIA/EIA/IS-839 |
R-UIM Overview, Operation, and File Structure Support in TIA/EIA-136-A |
|
TIA TIA/EIA/IS-875 |
Enhanced International Dialing, Calling Number Identification & Callback, Calling Party Category Identification |
|
TIA TIA/EIA-136-110-B |
TDMA Third Generation Wireless - RF Channel Assignments-Revision of TIA/EIA-136-110-A |
|
TIA TIA/EIA-136-210-A |
TDMA Third Generation Wireless - ACELP Minimum Performance-Revision of TIA/EIA-136-210 |
|
TIA TIA/EIA-136-220 |
TDMA Third Generation Wireless &Ndash; VSELP Minimum Performance |
|
TIA TIA/EIA-136-250 |
TDMA Third Generation Wireless - Minimum Performance Standards for ACELP Voice Activity Detection (VAD) |
|
TIA TIA/EIA-136-330 |
TDMA Third Generation Wireless - Packet Data Service Overview |
|
TIA TIA/EIA-136-331 |
TDMA Third Generation Wireless - Packet Data Service &Ndash; 136+ Physical Layer |
|
TIA TIA/EIA-136-420 |
TDMA Celular/PCS VSELP |
|
TIA TIA/EIA-136-620-A |
TDMA Third Generation Wireless - Teleservice Segmentation and Reassembly (TSAR) |
|
TIA TIA/EIA-136-741 |
TDMA Third Generation Wireless - System Assisted Mobile Positioning Through Satellite (SAMPS) for Analog Systems |
|
TIA TIA/EIA-136-760-A |
TDMA Third Generation Wireless Charge-Rate Indication Teleservice (CIT) |
|
TIA TIA/EIA-455-70 |
FOTP70 Procedure for Assessing High Temperature Exposure Effects on Mechanical Characteristics of Optical Fibers-WITHDRAWN SEPTEMBER 2003 - REPLACED BY TIA-455-67-A |
|
TIA TIA/EIA-464-B |
Requirements for Private Branch Exchange (PBX) Switching Equipment-Revision of TIA-464-A and Incorporation of TIA-464-A-1 |
|
TIA TIA/EIA-579-A |
Telecommunications Telephone Terminal Equipment Transmission Requirements for Digital Wireline Telephones |
|
TIA TIA/EIA-627 |
800 MHz Cellular System, TDMA Radio Interface, Dual-Mode Mobile Station - Base Station Compatibility Standard |
|
TIA TIA/EIA-664-511-A |
Wireless Features Description: Do Not Disturb-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-523-A |
Wireless Features Description: Voice Message Retrieval-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-524-A |
Wireless Features Description: Voice Privacy-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-532-A |
Wireless Features Description: Non-Public Service Mode-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-664-535-A |
Wireless Features Description: User Group-Revision of TIA/EIA-664 |
|
TIA TIA/EIA-690 |
Recommended Minimum Standards for 800-MHz Cellular Subscriber Units |
|
TIA TIA/EIA-691 |
Mobile Station - Base Station Compatibility Standard for Enhanced 800 MHz Analog Cellular |
|
TIA TIA/EIA-694 |
Electrical Characteristics for an Unbalanced Digital Interface for Data Signaling Rates up to 512 Kbit/s |
|
TIA TIA/EIA-732-312 |
Cellular Digital Packet Data (CDPD) System Specification Subnetwork Subprofiles |
|
TIA TIA/EIA-732-401 |
Cellular Digital Packet Data (CDPD) System Specification Airlink Physical Layer |
|
TIA TIA/EIA-732-406 |
Cellular Digital Packet Data (CDPD) System Specification Airlink Security |
|
TIA TIA/EIA-732-630 |
Cellular Digital Packet Data (CDPD) System Specification Accounting Service and Protocol |
|
TIA TIA/EIA-732-841 |
Cellular Digital Packet Data (CDPD) System Specification SNDCP PICS Proforma-Upgrade of TIA/EIA/IS-732-841 |
|
TIA TIA-1015 |
File Formats for Multimedia Services for cdma2000 Spread Spectrum Systems |
|
TIA TIA-1016-A |
Source-Controlled Variable-Rate Multimode Wideband Speech Codec (VMR-WB) - Service Options 62 and 63 for Spread Spectrum Systems-TIA-1016-A [SF] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-1040.1.06 |
Regenerative Satellite Mesh-A (RMS-A) Air Interface - Physical Layer Specification - Part 6: Radio Link Control |
|
TIA TIA-1040.2.02 |
Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC/SLC Layer Specification - Part 2: MAC Layer |
|
TIA TIA-1040.2.03 |
Regenerative Satellite Mesh-A (RMS-A) Air Interface - MAC/SLC Layer Specification - Part 3: SLC Layer |
|
TIA TIA-1042 |
Electro-Acoustic Recommended Minimum Performance Specification for cdma2000 Mobile Stations |
|
TIA TIA-41.511-E |
Part 511: Wireless Radiotelecommunications Intersystem Operations &Ndash; ANS/SS7 Transport Signaling Protocols |
|
TIA TIA-41.550-E |
Part 550: Wireless Radiotelecommunications Intersystem Operations &Ndash; MAP Parameters Signaling Protocols |
|
TIA TIA-41.642-E |
Mobile Application Part (MAP) - Segmentation |
|
TIA TIA-472E000 |
Sectional Specification (Adopted ICEA S-104-696-2001) Standard for Indoor-Outdoor Optical Fiber Cable |
|
TIA TIA-492AA00-A |
Blank Detail Specification for Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA-573AA00 |
Blank Detail Specification for Field-Portable Optical-Fiber Cleaving Tools |
|
TIA TIA-609AA00 |
Blank Detail Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA-631-A |
Telecommunications Telephone Terminal Equipment - Radio Frequency Immunity Requirements-Revision of TIA/EIA-631 |
|
TIA TIA-664.805 |
Wireless Features Description: CDMA Packet Data Service |
|
TIA TIA-668-A |
High Frequency Radio Facsimile |
|
TIA TIA-873.007 |
All-IP Core Network Multimedia Domain &Ndash; IP Multimedia Subsystem &Ndash; Charging Architecture |
|
TIA TIA-893 [SF] |
Software Distribution for TIA-893 - Selectable Mode Vocoder (SMV) - Service Option 56 - Specification-See TIA/IS-893 and TIA-893-1[E] ***For IHS TIA Subscription Customers Only - Contact IHS/Retail (1-800-854-7179) for One Complimentary Copy of Other Attachments*** |
|
TIA TIA-902.BAAF |
Wideband Air Interface Mobility Management (MM) Layer Specification - Public Safety Wideband Data Standards Project &Ndash; Digital Radio Technical Standards |
|
TIA TSB102.AABB |
APCO Project 25 Trunking Control Channel Formats |
|
TIA TSB121 |
Cellular Subscriber Unit Interface for TDD |
|
TIA TSB124 |
Support for Pre-Paid |
|
TIA TSB-129-A-1 |
Telecommunications Telephone Terminal Equipment U.S. Network Connections Regulatory Approval Guide - Addendum 1-Addendum 1 |
|
TIA TSB-162 |
Telecommunications Cabling Guidelines for Wireless Access Points |
|
TIA TSB-18-A |
Mechanical/Functional Characteristics of the Interface between DCEs and Voiceband Analog Channels |
|
TIA TSB41 |
IS-41-B Technical Notes |
|
TIA TSB69.3 |
Enhanced Digital Access Communications System (EDACS) Digital Air Interface for: Channel Access, Modulation, Messages, and Formats |
|
TIA TSB71 |
IS-94 Enhancements and Issues |
|
TIA TSB72 |
Centralized Optical Fiber Cabling Guidelines |
|
TIA TSB74 |
Support for 14.4 kbps Data Rate and PCS Interaction for Wideband Spread Spectrum Cellular Systems |
|
TIA TSB80 |
MSC-BC Interface for Public 800 MHz |
|
TIA TSB-87-1000 |
Cellular Digital Packet Data System Specification - Part 1000 Overview of Implementor Guidelines |
|
TIA TSB-87-2012 |
Cellular Digital Packet Data System Specification - Part 2012 CDPD Mobile Data Intermediate System |
|
TIA TSB-87-2013 |
Cellular Digital Packet Data System Specification - Part 2013 CDPD External Interfaces |
|
TIA TSB-87-2018 |
Cellular Digital Packet Data System Specification - Part 2018 M-ES EID Assignment |
|
TIA TSB-902.AAAA |
Wideband Data System Security Services &Ndash; Overview Public Safety &Ndash; Wideband Data Standards Project |
|
TIA TSB91 |
Satellite ATM Networks: Architectures and Guidelines |
|
TIA 152-C |
Minimum Standards for Land Mobile Communication FM or PM Transmitters, 25-866 MHz-Replaced by TIA/EIA-603 |
|
ECA 180 |
Power Transformers for Electronic Equipment |
|
ECA 186-11E |
Passive Electronic Component Parts, Test Methods for; Method 11: Thermal Shock in Air |
|
ECA 186-2E |
Passive Electronic Component Parts, Test Methods for; Method 2: Moisture Resistance (Cycling) |
|
ECA 186-4E |
Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage) |
|
ECA 186-5E |
Passive Electronic Component Parts, Test Methods for; Method 5: Salt Spray (Corrosion) |
|
ECA 186-6E |
Passive Electronic Component Parts, Test Methods for; Method 6: Mechanical Robustness of Terminals |
|
ECA 186-E |
Passive Electronic Component Parts, Test Methods for; General Instructions and Index of Tests |
|
ECA 190-A |
Pin Straighteners and Wiring Jigs for Electron Tubes |
|
ECA 199-A |
Solid and Semi-Solid Dielectric Transmission Lines |
|
ECA 202-A |
Recommended Practice for Preparation of Outline Drawings of Electron Tubes and Bases |
|
ECA 208 |
Definition and Register, Printed Wiring |
|
ECA 209-A |
Electron Tubes-Supplement 1 - 1965; Supplement 2 - 1968 |
|
TIA 252-A |
Microwave Transmission Systems |
|
TIA 271-A |
Waveguide Flanges-Pressurizeable Contact Types for Waveguide Sizes WR90 to WR2300 |
|
ECA 314 |
Envelope and Mounting Dimensions for Encapsulated Transformers and Inductors (Using Cores Listed in Table I of EIA Standard RS-217-A) |
|
ECA 331 |
Stereophonic Headphones with 3-Contact Plugs, Polarization of |
|
ECA 337 |
Glass Coated Thermistor Beads and Thermistor Beads in Glass Probes and Glass Rods (Negative Temperature Coefficient), General Spec. for |
|
TIA 374-A |
Land Mobile Signalling Standard |
|
TIA 384 |
Time Division Multiplex Equipment Standard for Nominal 4 kHz Channel Bandwidths |
|
ECA 416 |
Filters, Radio Interference |
|
ECA 421-A |
Dry Reed Switches, EIA/NARM Standard for |
|
TIA 424 |
Citizens Radio Service SSB Transceivers Operating in the 27 MHz Band, Minimum Standards |
|
ECA 436 |
Dry Reed Relays for Circuit Board Mounting |
|
ECA 446-A |
Non-Sensitive Pushbutton Switches |
|
ECA 493 |
Recommended Practice for Conversion of U.S. to Metric Dimensions for Color and Monochrome Cathode Ray Tubes and Their Component Parts |
|
ECA 495-A |
Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications |
|
ECA 498BA00 |
Blank Detail Specification for Keyboard Switches |
|
ECA 498BAAA |
Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels |
|
ECA 520DAAC |
Detail Specification on 4 Pole Toggle Switches |
|
ECA 520EAAB |
Detail Specification for Machine Insertable Dual In-Line Switches of Certified Quality |
|
ECA 535AAAF |
Fixed Tantalum Capacitors with Solid Electrolyte and Porous Anode with Wire Lead Terminals Rectangular, Subminiature, Non-Hermetically Sealed, Plastic Encapsulated, Polarized, Insulated, Radial Lead |
|
ECA 535ABAA |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode |
|
ECA 535ABAE |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Silver Case, Axial Lead, Elastomeric Seal, Polarized, Nickel Positive, Copper Negative Leads, Insulated |
|
ECA 535ACAB |
Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode |
|
ECA 540ADAA |
Detail Specification for Adaptor-Carrier Quad Flatpack to Pin Grid Array Sockets for Use in Electronic Equipment |
|
ECA 540B000 |
Sectional Specification Sockets for Pin Grid Array Devices With 2.54 mm x 2.54 mm (0.1 |
|
ECA 540DAAB |
Detail Specification Flexible Carrier 2 Piece Dual In-Line Socket for Use in Electronic Equipment |
|
ECA 540E000 |
Sectional Specification for Round-Style Sockets for Use in Electronic Equipment |
|
ECA 540EA00 |
Blank Detail Specification for Round Style Sockets |
|
ECA 540EAAA |
Detail Specification for Round Style Sockets |
|
ECA 540F000 |
Sectional Specification for Multi-Package Module Sockets for Use in Electronic Equipment |
|
ECA 540FA00 |
Blank Detail Specification for Multi-Package Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAC |
Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540G000 |
Sectional Specification for Burn-In Sockets for Use in Electronic Equipment |
|
ECA 580AA00 |
Blank Detail Specification for Fixed Metallized Polyethylene-Terephthalate Film Dielectric Chip Capacitors for Direct Current - Encapsulated |
|
ECA 7000000-A |
Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA 705 |
Electronic Industries Association - Automated Component Handling Committee - Guidelines and Procedures for Registration of New Technologies for Automated Component Handling for Publication in ACH-2000 |
|
ECA CB3-B |
Specifications and Standards Associated with Solders and Soldering |
|
CEA CEA WHITE PAPER |
Power Management for A/V Network- Capable Devices |
|
CEA CEA-109-D |
Intermediate Frequencies for Entertainment Receivers |
|
CEA CEA-2004 |
Audiobook Media and Player Compatibility |
|
CEA CEA-2012-A |
MOST Network Gateway for Aftermarket Products-(Contains Color) |
|
CEA CEA-600.37 |
Symbol-Encoding Sublayer |
|
CEA CEA-633.38 |
PL and RF Symbol-Encoding Sublayer Physical Layer Conformance |
|
CEA CEA-844 |
XML Encoding of Generic Common Application Language (Generic CAL) |
|
CEA CEA-851.1 |
IP-Based Digital Telephony for the Versatile Home Network-Replaced by CEA-851-A |
|
CEA CEA-9 |
Standard Method of Measurement for Phonograph Cartridges Used in Analog Disc Playback Equipment |
|
CEA CPEB2 |
Definition of Normal Operating Conditions for Television Receivers |
|
GEIA DMG-2 |
Automated Data Management Guideline |
|
GEIA EDIB1-B |
Engineering Design Integration Bulletin No. 1-B Unit Production Cost Tracking Model UPCT6 |
|
ECA EIA/ECA-364-91A |
TP-91A Dust Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA/ECA-703-A |
General Resistor Stress Test Qualification Specification |
|
ECA EIA/ECA-961 |
QUALIFICATION SPECIFICATION FOR DIE LEVEL NETWORKS WITH SOLDER BUMP INTERCONNECTS |
|
GEIA EIA/IS-110 |
CDIF - Transfer Format Encoding ENCODING.1-Interim Standard |
|
GEIA EIA/IS-112 |
CDIF Integrated Meta-model Common Subject Area-Interim Standard |
|
JEDEC EIA-302 |
Ranges and Conditions for Specifying Beta for Low Power, Audio Frequency Transistors for Entertainment Service |
|
ECA EIA-364-107 |
TP-107 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
|
ECA EIA-741 |
Specification for Small Form Factor 133.35 mm (5.25 in) Disk Drives |
|
ECA EIA-850 |
ECA Component Registration Integrated Passive Devices Product Registrations |
|
ECA IS-35 |
Two-Pin Dual-In-Line Capacitors |
|
ECA IS-38 |
Radial Lead Capacitors (Conformally Coated) |
|
ECA IS-43AA |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 1, Outdoor Cable |
|
ECA IS-43AF |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 2, Plenum Cable |
|
ECA IS-43AH |
Cable for LAN Twisted Pair Data Communications - Detail Specification for Type 8, Undercarpet Cable |
|
ECA IS-46 |
Test Procedure for Resistance to Soldering (Vapor Phase Technique) for Surface Mount Devices |
|
TIA IS-J-STD-781-SERIES 2 |
GMR-2 Series 02 (02.088) Service Specifications - Call Barring Supplementary Services-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.001) Network Specifications - Network Functions-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.002) Network Specifications - Network Architecture-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.003) Network Specifications - Numbering Addressing and Indentification-ETSI |
|
TIA IS-J-STD-781-SERIES 3 |
GMR-2 Series 03 (03.020) Network Specifications - Network Specifications - Security Related Network Functions-ETSI |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.021) Radio Interface Protocol Specifications - Rate Adaptation on the Mobile Earth Station (MES) - Gateway System Interface |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.088) Radio Interface Protocol Specifications - Call Barring Supplementary Services |
|
TIA IS-J-STD-781-SERIES 4 |
GMR-2 Series 04 (04.201) Radio Interface Protocol Specifications - Technical Realisation of the Early Flag Technique |
|
JEDEC JEP110 |
Guidelines for the Measurement of Thermal Resistance of GaAs FETs |
|
JEDEC JEP114 |
Guidelines for Particle Impact Noise Detection (PIND) Testing, Operator Training and Certification |
|
JEDEC JEP95 BOOK 2 SECTION 10 |
Functional Gauging Requirements-Revisions: 04/28/2000 to 07/14/2004 ***INDEX ONLY*** |
|
JEDEC JESD20 |
Standard for Description of 54/74ACXXXXX and 54/74ACTXXXXX Advanced High-Speed CMOS Devices |
|
JEDEC JESD207 |
Radio Front End - Baseband Digital Parallel (RBDP) Interface |
|
JEDEC JESD21-C |
Configurations for Solid State Memories-Release 8 |
|
JEDEC JESD22A111 |
Evaluation Procedure for Determining Capability to Bottom Side Board Attach by Full Body Solder Immersion of Small Surface Mount Solid State Devices |
|
JEDEC JESD22-A120 |
Test Method for the Measurement of Moisture Diffusivity and Water Solubility in Organic Materials Used in Integrated Circuits |
|
JEDEC JESD3-C |
Standard Data Transfer Format Between Data Preparation System and Programmable Logic Device Programmer |
|
JEDEC JESD50A |
Special Requirements for Maverick Product Elimination |
|
JEDEC JESD51-12 |
Guidelines for Reporting and Using Electronic Package Thermal Information |
|
JEDEC JESD51-5 |
Extension of Thermal Test Board Standards for Packages with Direct Thermal Attachment Mechanisms |
|
JEDEC JESD659B |
Failure-Mechanism-Driven Reliability Monitoring |
|
JEDEC JESD65B |
Definition of Skew Specifications for Standard Logic Devices |
|
JEDEC JESD671-A |
Component Quality Problem Analysis and Corrective Action Requirements (Including Administrative Quality Problems) |
|
JEDEC JESD7-A |
54/74HCXXXX and 54/74HCTXXXX High Speed CMOS Devices, Description of-Erratum - August 1986 |
|
JEDEC JESD8-15A |
Stub Series Terminated Logic for 1.8 V (SSTL_18) |
|
JEDEC JESD8-2 |
Standard for Operating Voltages and Interface Levels for Low Voltage Emitter-Coupled Logic (ECL) Integrated Circuits |
|
JEDEC JESD96A-1 |
Interoperability and Compliance Technical Requirements for JEDEC Standard JESD96A &Ndash; Recommended Practice for use with IEEE 802.11n-Addendum 1 to JESD96A |
|
EIA LEB3 |
Interpretations of HEW BRH Guide for Submission of Laser Equipment Reports |
|
TIA PN 3-0272.006-A |
Connection Control Plane for Ultra Mobile Broadband (UMBTM) Air Interface Specification-To be published as TIA-1121.006 |
|
TIA PN 3-0274 |
Network Evolution System Requirements Document-To be published as TIA-1123 |
|
TIA SP 3-3871-RV1 |
Fiber Optic Connector Intermateability Standard, Type Fiber Jack Connector-To be published as TIA-604-6-A |
|
TIA SP 3-4093-RF1 |
Electrical Characteristics for an Unbalanced Digital Interface-To be Reaffirmed as TIA-562 |
|
TIA SP 3-4652.537-RV1 |
Wireless Features Description: Wireless Intelligent Network Feature Descriptions-To be published as TIA-664.537-A |
|
ECA SP 4283 |
Aluminum-Electrolytic Capacitor Application Guideline-To be published as EIA/ECA-797 |
|
ECA SP 5051 |
Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts-To be published as ANSI/EIA-364-20C |
|
TIA SP3-4626-RV1 |
Project 25 &Ndash; Common Air Interface Reserved Values-Comment Period Expires: August 4,2003 |
|
TIA SP3771 |
Multimedia Premises Reference Architecture-Comment Period Expires: December 9, 1996; TIA/EIA-711 |
|
TIA SP4200 |
PWT Data Services Profile, Generic Data Link Service, Type C, Class 2-Comment Period Expires: May 19, 1999; TIA/EIA 622-13d |
|
TIA SP5032 |
Audio/Video Bus (AVBus) Physical Layer and Media Specification-Comment Period Expires: December 17, 2002; ANSI/EIA-693 |
|
ECA TEB 27 |
Relating Display Resolution and Addressability |
|
ECA TEP 181 |
Measurement of X-Radiation from Power Tubes, Recommended Practice for |
|
ECA TEP105-11-B |
Color Measurement and White Set-Up Procedure for CRT Screens |
|
ECA TEP105-18 |
Color Field Uniformity Test Procedures |
|
ECA TEP105-7-A |
Line Profile Measurements in Monochrome Cathode Ray Tubes |
|
ECA TEP110-A |
Monochrome Cathode Ray Tube Bulb Criteria |
|
ECA TEP131-A |
Criteria of Bulbs and Implosion Panels for Television Picture Tubes |
|
ECA TEP140 |
Proposed Acceptance Sampling Procedures for Small Lots |
|
ECA TEP194 |
Considerations Used in Establishing the X-Radiation Ratings of Monochrome and Color Direct-View Television Picture and Data Display Tubes-Amendment 1 - October 1987; Amendment 2 - September 1988 |
|
TIA TIA/EIA/IS-725-A |
Cellular Radiotelecommunications Intersystem Operations - Over-The-Air Service Provisioning (OTASP) & Parameter Administration (OTAPA) |
|
TIA TIA/EIA/IS-808 |
Incorporating UIM into 3G and IMT-2000 Systems |
|
TIA TIA/EIA/IS-817-1 |
A Position Determination Standard for Analog Systems-Addendum 1 |
|
TIA TIA/EIA/IS-834 |
G3G CDMA-DS to ANSI/TIA/EIA-41 |
|
TIA TIA/EIA/IS-840-A |
Minimum Performance Standards for Text Telephone Signal Detector and Text Telephone Signal Regenerator-Revision of TIA/EIA/IS-840 |
|
TIA TIA/EIA/IS-841 |
TIA/EIA-41-D Based Network Enhancements for MDN Based Message Centers |
|
TIA TIA/EIA/IS-880 |
TIA-41-D Based Network Enhancements for CDMA Packet Data Service (C-PDS) Phase 1 |
|
TIA TIA/EIA-125-A |
Recommended Minimum Performance Standard for Digital Cellular Spread Spectrum Speech Service Option 1 |
|
TIA TIA/EIA-136-000-F |
TDMA Third Generation Wireless List of Parts |
|
TIA TIA/EIA-136-037-A |
TDMA Third Generation Wireless R-UIM Application Toolkit |
|
TIA TIA/EIA-136-100-B |
TDMA Third Generation Wireless &Ndash; Introduction to Channels |
|
TIA TIA/EIA-136-121-A |
TDMA Cellular PCS - Digital Control Channel Layer 1 |
|
TIA TIA/EIA-136-131-C |
TDMA Third Generation Wireless - Digital Traffic Channel Layer 3-Revision of TIA/EIA-136-131-B |
|
TIA TIA/EIA-136-230 |
TDMA Third Generation Wireless - Minimum Performance Specifications for US-1 Voice Coder |