|
GEIA EIA-649-A |
National Consensus Standard for Configuration Management |
|
TIA TIA-568-B.1-7 |
Commercial Building Telecommunications Cabling Standard Part 1 - General Requirements Addendum 7 – Guidelines for Maintaining Polarity Using Array Connectors-Addendum 7 |
|
TIA TIA-568-B.2-9 |
Commercial Building Telecommunications Cabling Standard Part 2 - Balanced Twisted-Pair Cabling Components Addendum 9 – Additional Category 6 Balance Requirements and Measurement Procedures |
|
GEIA EIA-632 |
Processes for Engineering a System |
|
GEIA EIA-748-A |
Earned Value Management Systems |
|
GEIA IEEE/EIA 12207.0 |
Industry Implementation of International Standard ISO/IEC 12207 : 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes |
|
ECA J-STD-002B |
Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires |
|
ECA EIA/ECA-310-E |
Cabinets, Racks, Panels, and Associated Equipment |
|
TIA TIA-422-B |
Electrical Characteristics of Balanced Voltage Digital Interface Circuits |
|
ECA EIA-364-D |
Electrical Connector/Socket Test Procedures Including Environment Classifications-Errata: 10/23/2006 |
|
GEIA IEEE/EIA 12207.2 |
Industry Implementation of International Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard for Information Technology - Software Life Cycle Processes - Implementation Considerations-Replaces EIA J-STD-016 |
|
GEIA IEEE/EIA 12207.1 |
Industry Implementation of International Standard ISO/IEC 12207: 1995 (ISO/IEC 12207) Standard for information Technology - Software Life Cycle Processes - Life Cycle Data-Replaces EIA J-STD-016 |
|
TIA TIA-232-F |
Interface between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
GEIA GEIA-859 |
Data Management |
|
GEIA GEIA-STD-0005-2 |
Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems |
|
GEIA GEIA-HB-649 |
Implementation Guide for Configuration Management |
|
TIA TIA-222-G |
Structural Standard for Antenna Supporting Structures and Antennas-EFFECTIVE JANUARY 1, 2006; Includes County Listing 07/20/2005 after TIA-222-G standard - Please contact Global Engineering Documents (1-800-447-3352 ext.4960) for a electronic version of the 07/20/2005 County Listing |
|
EIA 359-A-1 |
Special Colors |
|
TIA TIA/EIA-644-A |
Electrical Characteristics of Low Voltage Differential Signaling (LVDS) Interface Circuits-Revision of TIA/EIA-644 |
|
TIA TIA-485-A |
Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint Systems |
|
GEIA GEIA-STD-0005-1 |
Performance Standard for Aerospace and High Performance Electronic Systems Containing Lead-free Solder |
|
TIA TIA-569-B |
Commercial Building Standard for Telecommunications Pathways and Spaces |
|
TIA TIA/EIA-568-B.3-1 |
Optical Fiber Cabling Components Standard; Addendum 1 - Additional Transmission Performance Specifications for 50/125 um Optical Fiber Cables-Addendum No. 1 to TIA/EIA-568-B.3 |
|
TIA TIA/EIA-568 SET |
Commercial Building Telecommunications Cabling Standard Part 1: General Requirements, Part 2: Balanced Twisted-Pair Cabling Components, and Part 3: Optical Fiber Cabling Components Standard-Revision B; Includes Addendums: B.1-1, B.1-2, B.1-3, B.1-4, B.1-5, B.1-7, B.2-1, B.2-2, B.2-3, B.2-4, B.2-4, B.2-5, B.2-6, B.2-9, B.2-11, and B.3-1 12/02/2005 |
|
ECA EIA-364-20C |
TP-20C Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts |
|
GEIA GEIA-HB-0005-1 |
Program Management/Systems Engineering Guidelines For Managing The Transition To Lead-Free Electronics |
|
JEDEC JESD625-A |
Requirements for Handling Electrostatic-Discharge-Sensitive (ESDS) Devices-Replaced JEDEC JESD42 |
|
TIA TIA/EIA-455-171A |
FOTP-171 Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies-Upgrade and Revision of TIA/EIA-455-171 |
|
ECA EIA/ECA-364-21C |
TP-21C Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and Coaxial Contacts |
|
ECA EIA-481-C |
8 mm Through 200 mm Embossed Carrier Taping and 8 mm & 12 mm Punched Carrier Taping of Surface Mount Components for Automatic Handling |
|
ECA EIA-364-31B |
TP-31B Humidity Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA/ECA-469-D |
Standard Test Method for Destructive Physical Analysis (DPA) of Ceramic Monolithic Capacitors |
|
TIA J-STD-607-A |
Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications |
|
TIA TIA-603-C |
Land Mobile FM or PM - Communications Equipment - Measurement and Performance Standards |
|
GEIA GEIA-HB-859 |
Implementation Guide for Data Management |
|
TIA TIA-102.AABC-B-1 |
TRUNKING CONTROL CHANNEL MESSAGES ADDENDUM for LINK LAYER AUTHENTICATION SERVICE-Addendum to TIA-102.AABC-B |
|
TIA TIA/EIA-606-A |
Administration Standard for the Telecommunications Infrastructure |
|
ECA EIA/ECA-364-26B |
TP-26B Salt Spray Test Procedure for Electrical Connectors, Contacts and Sockets |
|
ECA EIA-364-27B |
TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors |
|
TIA TIA-968-A-4 |
Telecommunications Telephone Terminal Equipment Technical Requirements for Connection of Terminal Equipment to the Telephone Network-Addendum 4 to TIA-968-A |
|
GEIA GEIA EIA-4899-A DRAFT |
Standard for Preparing an Electronic Components Management Plan (proposed IEC 62239 equiv) |
|
TIA TIA-598-C |
Optical Fiber Cable Color Coding |
|
TIA TIA-102.AACA-2 |
Project 25 Digital Radio Over-The-Air Reketing (OTAR) Protocol Addendum 2 - Data Link Independent OTAR-Addendum 2 |
|
TIA TIA/EIA-455-34A |
FOTP-34 Interconnection Device Insertion Loss Test |
|
ECA EIA-364-03B |
TP-03B Altitude Immersion Test Procedure for Electrical Connectors |
|
JEDEC EIA-471 |
Symbol and Label for Electrostatic Sensitive Devices |
|
ECA EIA/ECA-364-28E |
TP-28E Vibration Test Procedure for Electrical Connectors and Sockets |
|
TIA TIA-942 |
Telecommunications Infrastructure Standard for Data Centers |
|
TIA TIA/EIA-455-B |
Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components |
|
JEDEC J-STD-020C |
Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices |
|
GEIA GEIA-HB-0005-2 DRAFT |
Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-Free Solder and Finishes - Ballot Draft Copy-To be published as GEIA-HB-0005-2 |
|
GEIA EIA 557-B |
STATISTICAL PROCESS CONTROL SYSTEMS |
|
ECA EIA-364-02C |
TP-02C Air Leakage Test Procedure for Electrical Connectors |
|
ECA EIA/ECA-364-10D |
TP-10D FLUID IMMERSION TEST PROCEDURE FOR ELECTRICAL CONNECTORS |
|
ECA EIA/ECA-364-32D |
TP-32D Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors and Sockets |
|
TIA TIA-570-B |
Residential Telecommunications Infrastructure Standard |
|
ECA EIA/ECA-364-38B |
TP-38B Cable Pull-Out Test Procedure for Electrical Connectors |
|
TIA TIA/IS-707-A-3 |
Data Services Options for Spread Spectrum Systems Addendum 3 - cdma2000 High Speed Packet Data Service Option 33-Addendum No. 3 to TIA/EIA/IS-707-A |
|
TIA TIA/EIA-423-B |
Electrical Characteristics of Unbalanced Voltage Digital Interface Circuits |
|
TIA TIA-102.AABF-A-2 |
Project 25 Identity Extensions to Link Control Word Formats-Addendum 2 to TIA-102.AABF-A |
|
ECA EIA/ECA-364-06C |
TP-06C Contact Resistance Test Procedure for Electrical Connectors |
|
EIA 541 |
Packaging Material Standards for ESD Sensitive Items |
|
TIA TIA-758-A |
Customer-owned Outside Plant Telecommunications Infrastructure Standard |
|
ECA EIA/ECA-364-35B |
TP-35B Insert Rentention Test Procedure for Electrical Connectors |
|
TIA TIA-530-A |
High Speed 25 Position Interface for Data Terminal Equipment and Data Circuit-Terminating Equipment, Including Alternative 26-Position Connector |
|
ECA EIA-364-08B |
TP-08B Crimp Tensile Strength Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2003.1 |
|
GEIA EIA-836A |
Configuration Management Data Exchange and Interoperability-To obtain one complimentary of GEIA EIA-836A CD-ROM, please contact IHS/Retail at 1-800-854-7179. |
|
TIA TIA/EIA-604-10A |
FOCIS 10 Fiber Optic Connector Intermateability Standard - Type LC |
|
TIA TIA-455-13-A |
FOTP-13 Visual and Mechanical Inspection of Fiber Optic Components, Devices, and Assemblies |
|
TIA TIA-464-C-1 |
Telecommunications Multiline Terminal Systems Requirements for PBX Switching Equipment, Addendum 1 |
|
TIA EIA/TIA-455-3A |
FOTP-3 Procedure to Measure Temperature Cycling Effects on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components-Replaces 455-52-83 |
|
GEIA PN-GEIA-STD-0007 |
Logistics Product Data-Version 1.0; To be published as GEIA-STD-0007 |
|
TIA TIA/EIA-455-11C |
FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables |
|
TIA TIA-526-14-A |
OFSTP-14 Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant-ANSI APPROVAL WITHDRAWN AUGUST 2003 |
|
JEDEC JESD201 |
Environmental Acceptance Requirements for Tin Whisker Susceptibility of Tin and Tin Alloy Surface Finishes |
|
TIA TIA/EIA-899 |
Electrical Characteristics of Multipoint-Low-Voltage Differential Signaling (M-LVDS) Interface Circuits for Multipoint Data Interchange |
|
TIA TIA-587 |
Fiber Optic Graphic Symbols |
|
ECA EIA-364-09C |
TP-09C Durability Test Procedure for Electrical Connectors and Contacts |
|
ECA EIA/ECA-364-29C |
TP-29C Contact Retention Test Procedure for Electrical Connectors |
|
TIA J-STD-025-B-2 |
Lawfully Authorized Electronic Surveillance (LAES) – Addendum 2 - Support for Carrier Identity-Addendum to ANSI/J-STD-025-B |
|
ECA EIA-364-17B |
TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364-37B |
TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2014 |
|
JEDEC JESD22-A110-B |
Test Method A110-B Highly-Accelerated Temperature and Humidity Stress Test (HAST) |
|
TIA TIA-526-7 |
OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant |
|
TIA TIA/EIA-455-25C |
FOTP-25 Impact Testing of Optical Fiber Cables |
|
GEIA EIA-584 |
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of a Continuous Manufacturing Process |
|
TIA TIA-102.BACA-3 |
Project 25 Inter-RF Subsystem Interface Messages and Procedures for Voice and Mobility Management Services Addendum 3 - Supplementary Data-Addendum to TIA-102.BACA |
|
TIA TIA-440-B |
Fiber Optic Terminology |
|
TIA TIA-102.BAEB-A |
Project 25 Packet Data Specification - New Technology Standards Project – Digital Radio Technical Standards |
|
ECA EIA-364-83 |
TP-83 Shell-to-Shell and Shell-to-Bulkhead Resistance Test Procedure for Electrical Connectors |
|
TIA TIA-455-33-B |
FOTP-33 Optical Fiber Cable Tensile Loading and Bending Test |
|
TIA TIA-102.AAAB-A |
Project 25 Digital Land Mobile Radio – Security Services Overview |
|
TIA TIA-856-A-1[E] |
cdma2000 High Rate Packet Data Air Interface Specification - Addendum 1-Incorporated Addendum 1 |
|
ECA EIA/ECA-364-23C |
TP-23C LOW LEVEL CONTACT RESISTANCE TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS |
|
TIA TIA-102.AABA-A |
Project 25 Trunking Overview – New Technology Standards Project – Digital Radio Technical Standards |
|
TIA TIA-102.BAAA-A |
Project 25 FDMA – Common Air Interface |
|
GEIA EIA-731.2 |
Systems Engineering Capability Model Appraisal Method |
|
TIA TIA-455-85-A |
FOTP-85 Fiber Optic Cable Twist Test |
|
GEIA GEB1 |
Diminishing Manufacturing Sources and Material Shortages (DMSMS) Management Practices |
|
JEDEC JESD22-A114E |
Electrostatic Discharge (ESD) Sensitivity Testing Human Body Model (HBM) |
|
TIA TIA-102.BAHA |
Project 25 Fixed Station Interface Messages and Procedures |
|
TIA TIA-102.AABB-A |
Project 25 Trunking Control Channel Formats – New Technology Standards Projects – Digital Radio Technical Standards |
|
TIA TSB-88-B-1 |
Wireless Communications Systems - Performance in Noise and Interference - Limited Situations - Recommended Methods for Technology - Independent Modeling, Simulation, and Verifications-Addendum No. 1 to TSB-88-B |
|
TIA TIA-102.CAAB-B |
Project 25 Land Mobile Radio Transceiver Recommendations, Project 25 - Digital Radio Technology, C4FM/CQPSK Modulation |
|
TIA TSB-89-A |
Application Guidelines for TIA/EIA-485-A |
|
ECA EIA-364-66A |
TP-66A EMI Shielding Effectiveness Test Procedure for Electrical Connectors |
|
ECA EIA-364-41C |
TP-41C Cable Flexing Test Procedure for Electrical Connectors |
|
TIA TIA-329-C |
Minimum Standards for Communications Antennas, Base Station Antennas |
|
EIA 724 |
Product Life Cycle Data Model |
|
GEIA GEIA-933 |
Standard for Preparing a COTS Assembly Management Plan |
|
TIA TIA-2000.1-D-1[E] |
Introduction to cdma2000 Spread Spectrum Systems – Addendum 1 |
|
TIA TIA-835-C-1 |
cdma2000 Wireless IP Network Standard – Addendum 1-Addendum to TIA-835-C |
|
TIA TIA/EIA-455-88 |
FOTP-88 Fiber Optic Cable Bend Test |
|
CEA CEA-861-D |
A DTV Profile for Uncompressed High Speed Digital Interfaces |
|
TIA TIA-604-3-B |
FOCIS-3 Fiber Optic Connector Intermateability Standard, Type SC and SC-APC |
|
ECA EIA/ECA-364-75 |
TP-75 Lightning Strike Test Procedure for Electrical Connectors |
|
GEIA HEB1-A |
Human Engineering - Principles and Practices |
|
JEDEC JESD22-A104C |
Temperature Cycling |
|
JEDEC JEP131A |
Potential Failure Mode and Effects Analysis (FMEA) |
|
ECA EIA-364-05B |
TP-05B Contact Insertion, Release and Removal Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2012.1 |
|
GEIA EIA-585 |
Zero Acceptance Number Sampling Procedures and Tables for Inspection by Attributes of Isolated Lots |
|
JEDEC JESD22A121.01 |
Test Method for Measuring Whisker Growth on Tin and Tin Alloy Surface Finishes |
|
CEA CEA-2031 ERTA |
Testing and Measurement Methods for Mobile Loudspeaker Systems |
|
CEA CEA-608-D |
Line 21 Data Services |
|
TIA EIA-411-A |
Electrical and Mechanical Characteristics of Earth Station Antennas for Satellite Communications |
|
TIA TIA-455-14-A |
FOTP-14 Fiber Optic Shock Tests (Specified Pulse) |
|
TIA TIA-95-B |
Mobile Station-Base Station Compatibility Standard for Wideband Spread Spectrum Cellular Systems |
|
TIA TIA/EIA-250-C |
Electrical Performance for Television Transmission Systems |
|
ECA 364-07B |
TP-07B Contact Axial Concentricity Test Procedure for Electrical Connectors |
|
TIA TIA/EIA-455-41A |
FOTP-41 Compressive Loading Resistance of Fiber Optic Cables |
|
ECA EIA/ECA-364-42B |
TP-42B Impact Test Procedure for Electrical Connectors |
|
TIA TIA/EIA-604 |
Fiber Optic Connector Intermateability Standards (FOCIS) |
|
TIA TIA-102.BAEE-A |
Project 25 Radio Management Protocols – New Technology Standards Project – Digital Radio Technical Standards |
|
TIA TIA-2000.2-D-1[E] |
Physical Layer Standard for cdma2000 Spread Spectrum Systems – Addendum 1 |
|
TIA TIA-455-28-C |
FOTP-28 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Tension |
|
TIA TSB102-A |
APCO Project 25 System and Standards Definition |
|
TIA TIA-455-218 |
Measurement of Endface Geometry of Single Fiber Optical Connectors |
|
TIA TIA-878-1 |
Interoperability Specification (IOS) for High Rate Packet Data (HRPD) Access Network Interfaces – Addendum 1-Addendum No. 1 to TIA-878 |
|
TIA TIA/EIA-455-8 |
FOTP-8 Measurement of Splice or Connector Loss and Reflectance Using an OTDR |
|
ECA EIA-198-1-F |
Ceramic Dielectric Capacitors Classes I, II, III and IV - Part I: Characteristics and Requirements-Revision of EIA-198-1-E |
|
EIA EIA-765-A |
International and National Quality Standards Index |
|
TIA TIA-455-21-A |
FOTP-21 Mating Durability of Fiber Optic Interconnecting Devices |
|
TIA J-STD-025-A |
Lawfully Authorized Electronic Surveillance-Revision of J-STD-025 and J-STD-025-A; This Standard is Available Simultaneously with J-STD-025 and J-STD-025-B; |
|
TIA TSB102.AABD |
Project 25 Trucking Procedures New Technology Standards Project Digital Radio Technical Standards |
|
TIA TSB-102.BACC-A |
Project 25 Inter-RF Subsystem Interface Overview New Technology Standards Project Digital Radio Technical Standards |
|
ECA EIA-296-F |
Lead Taping of Components in Axial Lead Configuration for Automatic Handling |
|
TIA TIA-455-104-A |
FOTP-104 Fiber Optic Cable Cyclic Flexing Test |
|
TIA TIA-455-37-A |
FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable |
|
TIA TIA-455-82B |
FOTP 82-B Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
ECA EIA/ECA-364-45A |
TP-45A Firewall Flame Test Procedure for Electrical Connectors |
|
ECA EIA/ECA-364-39B |
TP-39B Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets |
|
TIA TIA/EIA-663 |
Personal Communications Interface Interoperability Standard (PCI) |
|
TIA TIA-102.BAAC-A |
Project 25 Common Air Interface Reserved Values-Supersedes TIA/EIA-102.BAAC-1:2001 |
|
TIA EIA/TIA-455-98A |
FOTP-98 Fiber Optic Cable External Freezing Test |
|
GEIA GEIA HB-748-1 |
Handbook: The Program Managers´ Guide to the Integrated Baseline Review Process |
|
TIA TIA/EIA/IS-102.BADA |
Telephone Interconnect Requirements and Definitions (Voice Service) |
|
TIA TIA/EIA/IS-771 ERTA |
Wireless Intelligent Network |
|
TIA TIA/EIA-41-D-1 |
Cellular Radiotelecommunications Intersystem Operations Addendum 1-Addendum No. 1 to TIAIEIA-41-D |
|
TIA TIA/EIA-455-81B |
FOTP-81 Compound Flow (Drip) Test for Filled Fiber Optic Cable |
|
TIA TIA-102.AACB |
Project 25 - Over-the-Air Rekeying (OTAR) Opertional Description |
|
TIA TIA-102.CAAA-B |
Digital C4FM/CQPSK Transceiver Measurement Methods |
|
TIA TIA-1099 |
Forward Link Only Air Interface Specification for Terrestrial Mobile Multimedia Multicast |
|
TIA TIA-604-5-D |
Fiber Optic Connector Intermateability Standard, Type MPO |
|
ECA EIA/ECA-364-01B |
TP-01B Acceleration Test Procedure for Electrical Connectors |
|
GEIA GEIA-4900 |
Use of Semiconductor Devices Outside Manufacturers´ Specified Temperature Ranges |
|
TIA TIA-470.310-C |
Telecommunications – Telephone Terminal Equipment – Cordless Telephone Range Measurement Procedures |
|
TIA TIA-574 |
9-Position Non-Synchronous Interface Between Data Terminal Equipment and Data Circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
TIA TIA/EIA-455-54B |
FOTP-54 Mode Scrambler Requirements for Overfilled Launching Conditions to Multimode Fibers |
|
TIA TIA-455-123 |
FOTP-123 Measurement of Optical Fiber Ribbon Dimensions |
|
ECA EIA-364-24B |
TP-24B Maintenance Aging Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2002.1 |
|
ECA EIA-364-25C |
TP-25C Probe Damage Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2006.1 |
|
TIA TIA/EIA-455-4C |
FOTP-4 Fiber Optic Component Temperature Life Test |
|
TIA TIA-470.210-C-1 |
Telecommunications Telephone Terminal Equipment Resistance and Impedance Performance Requirements for Analog Telephones Addendum 1-Addendum to TIA-470.210-C |
|
TIA TIA-526 |
Standard Test Procedures for Fiber Optic Systems |
|
ECA 364-14B |
TP-14B Ozone Exposure Test Procedure for Electrical Connectors |
|
CEA CEA-805-C |
Data on the Component Video Interface |
|
ECA EIA/ECA-364-53B |
TP-53B Nitric Acid Vapor Test, Gold Finish Test Procedure for Electrical Connectors and Sockets |
|
JEDEC JESD30D |
Descriptive Designation System for Semiconductor-device Packages |
|
TIA TIA-455-177-B |
FOTP-177 IEC-60793-1-43 Optical Fibres – Part 1-43: Measurement Methods and Test Procedures – Numerical Aperture-REPLACES TIA/EIA-455-7 AND TIA/EIA-455-47 |
|
GEIA EIA-554 SET |
Method Selection for Assessment of Nonconforming Levels in Parts per Million (PPM) - Includes EIA-554-1, EIA-554-2, and EIA-554-A |
|
GEIA RB9 |
Failure Mode and Effect Analyses |
|
TIA TIA/EIA-455-2C |
FOTP-2 Impact Test Measurements for Fiber Optic Devices |
|
TIA TIA/EIA-455-71A |
FOTP-71 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
|
TIA TIA-102.BABA |
Project 25 Vocoder Description |
|
ECA 448-4 |
Standard Test Methods for Electromechanical Switches (Test Methods for Logic (TTL) Level Endurance and Low Level Endurance) |
|
CEA CEA-802 |
Product Marking Standard |
|
ECA EIA/ECA-364-22B |
TP-22B Simulated Life Test Procedure for Electrical Connectors |
|
TIA TIA-102.AACD |
Project 25 Digital Land Mobile Radio – Key Fill Device (KFD) Interface Protocol |
|
TIA TIA-526-4-A |
OFSTP-4 Optical Eye Pattern Measurement Procedure |
|
TIA TIA-928-2[E] |
TIA-41 Support for the Mobile Equipment Identity (MEID)-Addendum to TIA-928 |
|
GEIA 267-C |
Axis and Motion Nomenclature for Numerically Controlled Machines |
|
GEIA 274-D |
Interchangeable Variable Block Data Format for Positioning, Contouring, and Contouring/Positioning Numerically Controlled Machines |
|
JEDEC JEP113-B |
Symbol and Labels for Moisture-Sensitive Devices |
|
JEDEC JESD47E |
Stress-Test-Driven Qualification of Integrated Circuits |
|
JEDEC JESD57 |
Test Procedures for the Measurement of Single-Event Effects in Semiconductor Devices from Heavy Ion Irradiation |
|
TIA TIA-455-127-A |
FOTP-127-A Basic Spectral Characterization of Laser Diodes |
|
TIA TIA-455-89-B |
FOTP-89 Optical Fiber Cable Jacket Elongation and Tensile Strength |
|
TIA TIA-604-1 |
FOCIS 1 Fiber Optic Connector Intermateability Standard |
|
CEA CEA-709.1-B |
Control Network Protocol Specification |
|
GEIA SSB-1.001 |
Qualification and Reliability Monitors-Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
TIA TIA/EIA-455-32A |
FOTP-32 Fiber Optic Circuit Discontinuities |
|
TIA TIA-1102 |
Minimum Performance Specification for Terrestrial Mobile Multimedia Multicast Forward Link Only Devices |
|
TIA TIA-455-57-B |
FOTP-57 Preparation and Examination of Optical Fiber Endface for Testing Purposes |
|
TIA TIA-604-4-B |
FOCIS-4 Fiber Optic Connector Intermateability Standard, Type FC and FC-APC |
|
GEIA CMB6-3 |
Configuration Identification |
|
ECA EIA/ECA-364-13C |
TP-13C Mating and Unmating Force Test Procedure for Electrical Connectors |
|
ECA EIA/ECA-720-A |
SPECIFICATION FOR SMALL FORM FACTOR 63.5 mm (2.5 inch) DISK DRIVES |
|
GEIA EIA-738 |
Guideline on the Use and Application of Cpk |
|
TIA TIA/EIA/IS-756-A |
TIA/EIA-41-D Enhancements for Wireless Number Portability Phase II |
|
TIA TIA-102.AACE |
Project 25 Digital Land Mobile Radio – Link Layer Authentication |
|
TIA TIA-334-C |
Signal Quality at Interface Between Data Terminal Equipment and Synchronous Data Circuit-Terminating Equipment for Serial Data Transmission |
|
TIA TIA-455-107-A |
FOTP-107 Determination of Component Reflectance or Link/System Return Loss Using a Loss Test Set-Revision of EIA/TIA-455-107 |
|
TIA TIA-571-B |
Telecommunications Telephone Terminal Equipment Electrical, Thermal, Mechanical Environmental Performance Requirements |
|
ECA 364-C |
Electrical Connector/Socket Test Procedures Including Environmental Classifications |
|
CEA CEA-2030 |
Multi Room Audio Cabling Standard |
|
TIA EIA/TIA-455-42A |
FOTP-42 Optical Crosstalk in Fiber Optic Components |
|
GEIA SSB-1-C |
Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
TIA TIA/EIA-455-1B |
FOTP-1 Cable Flexing for Fiber Optic Interconnecting Devices |
|
TIA TIA-1008-A |
IP over Satellite (IPOS) |
|
TIA EIA/TIA-455-12A |
FOTP-12 Fluid Immersion Test for Fiber Optic Components-Replaces 455-40-83 |
|
ECA EIA-364-105 |
TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors |
|
TIA TIA/EIA-604-12 |
FOCIS 12 Fiber Optic Connector Intermateability Standard Type MT-RJ |
|
TIA TIA-1104 |
Test Application Protocol for Terrestrial Mobile Multimedia Multicast Forward Link Only Transmitters and Devices |
|
TIA TIA-2000.5-D |
Upper Layer (Layer 3) Signaling Standard for cdma2000 Spread Spectrum Systems |
|
ECA EIA-364-81A |
TP-81 Combustion Characteristics Test Procedure for Electrical Connector Housings, Connector Assemblies and Sockets |
|
JEDEC JESD22-A102-C |
Accelerated Moisture Resistance - Unbiased Autoclave |
|
JEDEC JESD97 |
Marking, Symbols, and Labels for Identification of Lead (Pb) Free Assemblies, Components, and Devices |
|
TIA TIA/EIA/IS-2001-A |
Interoperability Specifications (IOS) for cdma2000 Access Network Interfaces-Replaced by TIA/EIA/IS-2001-A |
|
TIA TIA/EIA-455-16A |
FOTP-16 Salt Spray (Corrosion) Test for Fiber Optic Components |
|
TIA TIA/EIA-455-5C |
FOTP-5 Humidity Test Procedure for Fiber Optic Components |
|
TIA TIA-41.000-E-3 |
Mobile Application Part (MAP) Introduction – Addendum 3-Addendum 3 to TIA-41.000-E |
|
TIA TIA-455-179 |
FOTP-179 Inspection of Cleaved Fiber End Faces by Interferometry |
|
TIA TIA-561 |
Simple 8 Position Non-Synchronous Interface Between Data Terminal Equipment and Data circuit-Terminating Equipment Employing Serial Binary Data Interchange |
|
CEA CEA-23-A |
Measurement Procedures for Determining Compliance with FCC Rules for “Cable-Ready Consumer Electronics Equipment†|
|
ECA EIA/ECA-364-70B |
TP-70B TEMPERATURE RISE VERSUS CURRENT TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS |
|
JEDEC JESD22-B102D |
Solderability |
|
TIA TIA-604-2-B |
FOCIS-2 Fiber Optic Connector Intermateability Standard, Type ST |
|
ECA 364-44A |
TP-44A Corona Test Procedure for Electrical Connectors |
|
ECA 622 |
Glossary of Electrical Connector Related Terms |
|
CEA CEA-2006-A |
Testing & Measurement Methods for Mobile Audio Amplifiers |
|
CEA CEA-556-C |
Outer Shipping Container Label Standard |
|
CEA CEA-600.33 |
Coax Cable Physical Layer and Medium Specification |
|
JEDEC JESD22-A101-B |
Steady-State Temperature Humidity Bias Life Test |
|
TIA TIA-455-56-B |
FOTP-56 Test Method for Evaluating Fungus Resistance of Optical Fiber and Cable |
|
GEIA CMB6-6 |
Reviews and Configuration Audits |
|
GEIA CMB7-3 |
CALS Configuration Management SOW and CDRL Guidance |
|
ECA EIA/ECA-575-A |
Resistors, Rectangular, Surface Mount General Purpose |
|
ECA EIA-364-40B |
TP-40B Crush Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2008.1 |
|
GEIA SSB-1.003-A |
Acceleration Factors-Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
TIA TIA-455-220-A |
FOTP-220 Differential Mode Delay Measurement of Multimode Fiber in the Time Domain |
|
TIA TIA-470.110-C-1 |
Telecommunications Telephone Terminal Equipment Handset Acoustic Performance Requirements Addendum 1 |
|
TIA TIA-637-C-1[E] |
Short Message Services (SMS) for Wideband Spread Spectrum Systems-Addendum to TIA-637-C |
|
CEA CEA-770.2-D |
Standard Definition TV Analog Component Video Interface |
|
ECA EIA/ECA-364-43B |
TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
|
ECA EIA/ECA-364-54A |
TP-54A Magnetic Permeability Test Procedure for Electrical Connectors, Contacts, and Sockets |
|
ECA EIA-364-80 |
TP-80 Low Frequency Shielding Effectiveness Test Procedure for Electrical Connectors and Sockets |
|
JEDEC JESD78A |
IC Latch-Up Test |
|
TIA TIA-102.BAAD |
Project 25 Common Air Interface Description for Conventional Channels |
|
TIA TIA-102.CABC |
Interoperability Testing for Voice Operation in Trunked Systems |
|
TIA TIA-810-B |
Telecommunications Telephone Terminal Equipment Transmission Requirements for Narrowband Digital Telephones |
|
CEA CEA-CEB17 |
A Floor-to-Ceiling Guide for Residential Speaker Systems Planning, Selection and Instalation for Optimum Performance-(Contains Color) |
|
GEIA GEIA-GEB-0002 |
Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment |
|
JEDEC JEP122C |
Failure Mechanisms and Models for Silicon Semiconductor Devices |
|
JEDEC JESD9-A |
Metal Package Specification for Microelectronic Packages and Covers |
|
TIA J-STD-025 |
Lawfully Authorized Electronic Surveillance-Upgrade and Revision of IS-J-STD-025; This Standard is Available Simultaneously with J-STD-025-A and J-STD-025-B; |
|
GEIA SSB-1.002 |
Environmental Tests and Associated Failure Mechanisms-Annex to SSB-1, Guidelines for Using Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
TIA TIA-455-133-A |
FOTP-133 IEC-60793-1-22 Optical Fibres Part 1-22: Measurement Methods and Test Procedures Length Measurement |
|
TIA TIA-492AAAA-A |
Detail Specification for 62.5-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers |
|
ECA 364-46B |
TP-46B Microsecond Discontinuity Test Procedure for Electrical Connectors, Contacts and Sockets |
|
CEA CEA-2014 |
Web-based Protocol and Framework for Remote User Interface on UPnP(TM) Networks and the Internet (Web4CE) |
|
CEA CEA-775-B |
DTV 1394 Interface Specification |
|
CEA CEA-931-C |
Remote Control Command Passthrough for Home Networking |
|
ECA EIA/ECA-364-110 |
TP-110 Thermal Cycling Test Procedure for Electrical Connectors and Sockets |
|
GEIA EMCB 1-1 |
Historical Rationale for Military EMI Limits-Best Copy Available |
|
GEIA GEIA-OP-0002 |
Style Manual for Standards and Other Publications of GEIA |
|
JEDEC JESD22-B104C |
Mechanical Shock |
|
JEDEC JESD79-2C |
DDR2 SDRAM SPECIFICATION |
|
GEIA SSB-1.004 |
Failure Rate Estimating-Annex to SSB-1, Guidelines for Using of Plastic Encapsulated Microcircuits and Semiconductors in Military, Aerospace and Other Rugged Applications |
|
TIA TIA/EIA/IS-826.1 |
Wireless Intelligent Network Capabilities for Pre-Paid Charging Chapter 1 Overview-Also See TIA-826-A |
|
TIA TIA/EIA-455-204 |
FOTP-204 Measurement of Bandwidth on Multimode Fiber |
|
TIA TIA/EIA-607 |
Commercial Building Grounding and Bonding Requirements for Telecommunications-Replaced by J-STD-607 |
|
TIA TIA/EIA-854 |
Full Duplex Ethernet Specification for 1000Mbis/s (1000BASE-TX) Operating over Category 6 Balanced Twisted-Pair Cabling |
|
TIA TIA-1019 |
Structural Standards for Steel Gin Poles Used for Installation of Antenna Towers and Antenna Supporting Structures |
|
TIA TIA-455-38 |
FOTP-38 Measurement of Fiber Strain in Cables under Tensile Load |
|
TIA TIA-455-87-B |
FOTP-87 Fiber Optic Cable Knot Test |
|
ECA 364-79 |
TP-79 Insert Bond Strength Test Procedure for Electrical Connectors |
|
GEIA CMB5-A |
Configuration Management Requirements for Subcontractors/Vendors |
|
ECA EIA-364-99 |
TP-99 Gage Location and Retention Test Procedure for Electrical Connectors |
|
JEDEC JEP149 |
Application Thermal Derating Methodologies |
|
EIA JIG-101 |
Material Composition Declaration for Electronic Products |
|
ECA 483 |
Standard Method of Test for Effective Series Resistance (ESR) and Capacitance of Multilayer Ceramic Capacitors at High Frequencies-Editorially Corrected - February 1982 |
|
CEA CEA-636 |
Recommended Loudspeaker Safety Practices |
|
JEDEC JESD74A |
Early Life Failure Rate Calculation Procedure for Semiconductor Components |
|
TIA TIA/EIA-455-184 |
FOTP-184 Coupling Proof Overload Test for Fiber Optic Interconnecting Devices |
|
TIA TIA/EIA-455-188 |
FOTP-188 Low Temperature Testing of Fiber Optic Components |
|
TIA TIA-102.BAAB-B |
Project 25 - Common Air Interface Conformance Test |
|
TIA TIA-455-124-A |
FOTP124 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by Interferometry |
|
JEDEC JESD22-A106B |
Thermal Shock |
|
JEDEC JESD22-A108C |
Temperature, Bias, and Operating Life |
|
GEIA SEB6-A |
System Safety Engineering in Software Development |