BSI BS EN 1155 |
Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods-CORR 14492: May 23, 2003; |
BSI BS EN 1158 |
Building hardware Door coordinator devices Requirements and test methods-CORR 14398: March 13, 2003; |
BSI BS EN 12015 |
Electromagnetic Compatibility - Product Family Standard for Lifts, Escalators and and moving walks Emission |
BSI BS EN 12016 |
Electromagnetic compatibility Product family standard for lifts, escalators and moving walks Immunity |
BSI BS EN 12895 |
Industrial Trucks - Electromagnetic Compatibility |
BSI BS EN 13241- 1 |
Industrial, commercial and garage doors and gates Product standard Part 1: Products without fire resistance or smoke control characteristics-CORR 14656: September 12, 2003; |
BSI BS EN 13309 |
Construction Machinery - Electromagnetic Compatibility of Machines with Internal Electrical Power Supply |
BSI BS EN 14010 |
Safety of machinery Equipment for power driven parking of motor vehicles Safety and EMC requirements for design, manufacturing, erection and commissioning stages |
BSI BS EN 50065- 1 |
Signalling on Low-Voltage Electrical Installations in the Frequency Range 3 kHz to 148.5 kHz - Part 1: General Requirements, Frequency Bands and Electromagnetic Disturbances |
BSI BS EN 50065-2- 1 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in |
BSI BS EN 50065-2- 2 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in |
BSI BS EN 50065-2- 3 |
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by elec |
BSI BS EN 50083- 2 |
Cable Networks for Television Signals, Sound Signals and Interactive Services - Part 2: Electromagnetic Compatibility for Equipment |
BSI BS EN 50083- 8 |
Cable networks for television signals, sound signals and interactive services Part 8: Electromagnetic compatibility for networks |
BSI BS EN 50090-2- 2 |
Home and Building Electronic Systems (HBES) Part 2-2: System Overview - General Technical Requirements-AMD 14291: June 24, 2003; |
BSI BS EN 50090- 8 |
Home and Building Electronic Systems (HBES) - Part 8: Conformity Assessment of Products |
BSI BS EN 50091- 2 |
Uninterruptable Power Systems (UPS) Part 2: EMC Requirements (E) |
BSI BS EN 50121- 1 |
Railway Applications - Electromagnetic Compatibility - Part 1: General- Supersedes DD ENV 50121-1:1996; |
BSI BS EN 50121- 2 |
Railway Applications - Electromagnetic Compatibility - Part 2: Emission of the Whole Railway System to the Outside World-Supersedes DD ENV 50121- 2:1996; |
BSI BS EN 50121-3- 1 |
Railway Applications - Electromagnetic Compatibility - Part 3-1: Rolling Stock - Train and Complete Vehicle-Supersedes DD ENV 50121-3-1:1996; |
BSI BS EN 50121-3- 2 |
Railway Applications - Electromagnetic Compatibility - Part 3-2: Rolling Stock - Apparatus-Supersedes DD ENV 50121-3-2:1996; |
BSI BS EN 50121- 4 |
Railway Applications - Electromagnetic Compatibility - Part 4: Emission and Immunity of the Signalling and Telcommunications Apparatus |
BSI BS EN 50121- 5 |
Railway Applications - Electromagnetic Compatibility - Part 5: Emission and Immunity of Fixed Power Supply Installations and Apparatus-Supersedes DD ENV 50121- 5:1996; |
BSI BS EN 50130- 4 |
Alarm systems Part 4: Electromagnetic compatibility Product family standard: Immunity requirements for components of fire, intruder and social alarm systems- AMD 14441; July 16, 2003; |
BSI BS EN 50148 |
Electronic Taximeters (E) |
BSI BS EN 50240 |
Electromagnetic compatibility (EMC) Product standard for resistance welding equipment |
BSI BS EN 50270 |
Electromagnetic Compatibility - Electrical Apparatus for the Detection and Measurement of Combustible Gases, Toxic Gases or Oxygen |
BSI BS EN 50293 |
Electromagnetic Compatibility - Road Traffic Signal Systems - Product Standard |
BSI BS EN 50295 |
Low-Voltage Switchgear and Controlgear - Controller and Device Interface Systems - Actuator Sensor Interface (AS-i) |
BSI BS EN 50329 |
Railway applications Fixed installations Traction transformers- Supersedes BS 7682:1993 and partially supersedes BS EN 60146-1-3:1993; |
BSI BS EN 50370- 2 |
Electromagnetic compatibility (EMC) Product family standard for machine tools Part 2: Immunity |
BSI BS EN 55011 |
Industrial, Scientific and Medical (ISM) Radio-Frequency Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement-AMD 14477: July 23, 2003; |
BSI BS EN 55012 |
Vehicles, Boats, and Internal Combustion Engine Driven Devices - Radio Disturbance Characteristics - Limits and Methods of Measurement for the Protection of Receivers Except Those Installed in the Vehicle/Boat/Device Itself or in Adjacent Vehicles/Boats/D |
BSI BS EN 55013 |
Sound and television broadcast receivers and associated equipment Radio disturbance characteristics Limits and methods of measurement-AMD 14680: September 30, 2003; |
BSI BS EN 55014- 1 |
Electromagnetic compatibility Requirements for household appliances, electric tools and similar apparatus Part 1: Emission-AMD 13592: September 6, 2002; AMD 14476: July 14, 2003 |
BSI BS EN 55014- 2 |
Electromagnetic Compatibility Requirements for Household Appliances, Electric Tools and Similar Apparatus Part 2: Immunity Product Family Standard-AMD 13662: September 18, 2002; AMD 9962: April 1998; Supersedes BS EN 55104:1995; CISPR 14-2: 1997 |
BSI BS EN 55015 |
Limits and Methods of Measurement of Radio Disturbance Characteristics of Electrical Lighting and Similar Equipment-AMD 13716: July 4, 2002; AMD 14943: February 19, 2004; CORR 14024: August 16, 2002 |
BSI BS EN 55016-1- 1 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-1: Radio disturbance and immunity measuring apparatus Measuring apparatus |
BSI BS EN 55016-1- 2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-2: Radio disturbance and immunity measuring apparatus Ancillary equipment Conducted disturbances |
BSI BS EN 55016-1- 3 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-3: Radio disturbance and immunity measuring apparatus Ancillary equipment Disturbance power |
BSI BS EN 55016-1- 4 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-4: Radio disturbance and immunity measuring apparatus Ancillary equipment Radiated disturbances |
BSI BS EN 55016-1- 5 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 1-5: Radio disturbance and immunity measuring apparatus Antenna calibration test sites for 30 MHz to 1 000 MHz |
BSI BS EN 55016-2- 1 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-1: Methods of measurement of disturbances and immunity Conducted disturbance measurements |
BSI BS EN 55016-2- 2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-2: Methods of measurement of disturbances and immunity Measurement of disturbance power |
BSI BS EN 55016-2- 3 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-3: Methods of measurement of disturbances and immunity Radiated disturbance measurements |
BSI BS EN 55016-2- 4 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 2-4: Methods of measurement of disturbances and immunity Immunity measurements |
BSI BS EN 55016-4- 2 |
Specification for radio disturbance and immunity measuring apparatus and methods Part 4-2: Uncertainties, statistics and limit modelling Uncertainty in EMC measurements |
BSI BS EN 55020 |
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement-AMD 14396: May 21, 2003; |
BSI BS EN 55024 |
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement-AMD 14388: June 9, 2003; CISPR 24: 1997; |
BSI BS EN 55025 |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices Limits and methods of measurement-CORR 15199:June 22, 2004; Also Known as CISPR 25:2002 |
BSI BS EN 55103- 1 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 1: Emission |
BSI BS EN 55103- 2 |
Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use Part 2: Immunity |
BSI BS EN 60034- 1 |
Rotating electrical machines Part 1: Rating and performance-AMD 14189:April 2003 |
BSI BS EN 60034- 1 |
Rotating electrical machines Part 1: Rating and performance |
BSI BS EN 60146- 2 |
Semiconductors convertors - Part 2: Self-commutated semiconductor converters including direct d.c. converters-CORR 11067: September 2000; IEC 60146-2: 1999; |
BSI BS EN 60204- 31 |
Safety of Machinery - Electrical Equipment of Machines - Part 31: Particular Safety and EMC Requirements for Sewing Machines, Units and Systems-CORR 13713: July 3, 2001; Supersedes BS 2771 Part 1 |
BSI BS EN 60255-22- 3 |
Electrical Relays - Part 22-3: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Radiated Electromagnetic Field Disturbance Tests-IEC 60255-22-3: 2000; |
BSI BS EN 60255-22- 6 |
Electrical Relays - Part 22-6: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Immunity to Conducted Disturbances Induced by Radio Frequency Fields |
BSI BS EN 60255- 25 |
Electrical Relays - Part 25: Electromagnetic Emission Tests for Measuring Relays and Protection Equipment-IEC 60255-25: 2000; |
BSI BS EN 60255- 26 |
Electrical relays Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment-Supersedes BS EN 50263:2000 |
BSI BS EN 60521 |
Class 0.5, 1 and 2 Alternating-Current Watthour Meters-Superseded by BS EN 62053-11:2003 |
BSI BS EN 60669-2- 1 |
Switches for household and similar fixed electrical installations Part 2-1: Particular requirements Electronic switches |
BSI BS EN 60669-2- 2 |
Switches for Household and Similar Fixed Electrical Installations Part 2: Particular Requirements Section 2: Remote-Control Switches (RCS) |
BSI BS EN 60669-2- 3 |
Switches for Household and Similar Fixed Electrical Installations - Part 2: Particular Requirements - Section 3: Time-Delay Switches (TDS) |
BSI BS EN 60687 |
Alternating Current Static Watt-Hour Meters for Active Energy (Classes 0,2 S and 0,5 S)-AMD 7917: September 15, 1993; Superseded by BS EN 62053- 22:2003 |
BSI BS EN 60730- 1 |
Automatic electrical controls for household and similar use - Part 1: General requirements-AMD 13893: October 9, 2002; AMD 14825: January 5, 2004; AMD 15553: October 21, 2005 |
BSI BS EN 60730- 1 |
Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements-AMD 9205: December 1996; AMD 9673: November 1997; AMD 10034: September 1998; AMD 10601: January 2000; AMD 12021: May 2001; AMD 14824: April 5, 2004 |
BSI BS EN 60730-2- 10 |
Automatic electrical controls for household and similar use Part 2-10: Particular requirements for motor starting relays-AMD 14135: February 25, 2003; |
BSI BS EN 60730-2- 11 |
Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements Section 2.11: Energy Regulators-AMD 10087; November 1998; To be Read in Conjunction with BS EN 60730-1: 1992; |
BSI BS EN 60730-2- 13 |
Automatic electrical controls for household and similar use Part 2-13: Particular requirements for humidity sensing controls-AMD 13870: October 30, 2002; |
BSI BS EN 60730-2- 14 |
Automatic Electrical Controls for Household and Similar Use - Part 2-14: Particular Requirements for Electrical Actuators-AMD 13515: March 20, 2002; IEC 60730-2-14: 1995; |
BSI BS EN 60730-2- 16 |
Automatic Electrical Controls for Household and Similar Use - Part 2-16: Particular Requirements for Automatic Electrical Water Level Operating Controls of the Float Type for Household and Similar Applications-AMD 13513: April 01, 2002; |
BSI BS EN 60730-2- 18 |
Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls, Including Mechanical Requirements-IEC 60730-2-18: 1997; |
BSI BS EN 60730-2- 2 |
Automatic electrical controls for household and similar use Part 2-2: Particular requirements for thermal motor protectors-AMD 15749: December 14, 2005 |
BSI BS EN 60730-2- 3 |
Automatic Electrical Controls for Household and Similar Use - Part 2-3: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps- AMD 13263: March 4, 2002; |
BSI BS EN 60730-2- 5 |
Automatic Electrical Controls for Household and Similar Use - Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems |
BSI BS EN 60730-2- 6 |
Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements-CORR 13262: March 4, 2002; to Be Read in Conjunction with BS EN 60730-1: 199 |
BSI BS EN 60730-2- 7 |
Automatic electrical controls for household and similar use Part 2-7: Particular requirements for timers and time switches-AMD 14651; December 15, 2003; |
BSI BS EN 60730-2- 8 |
Automatic Electrical Controls for Household and Similar Use - Part 2-8: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements-AMD 14826: December 15, 2003; |
BSI BS EN 60730-2- 9 |
Automatic electrical controls for household and similar use Part 2-9: Particular requirements for temperature sensing controls-AMD 14529: November 5, 2003; AMD 15587: March 10, 2005 |
BSI BS EN 60730-2- 9 |
Automatic Electrical Controls for Household and Similar Use - Part 2-9: Particular Requirements for Temperature Sensing Controls-AMD 9408: March 1997; AMD 9556: September 1997; AMD 9812: February 1998; AMD 13232: January 21, 2002; AMD 15588: May 6, 2005 |
BSI BS EN 60870-2- 1 |
Telecontrol Equipment and Systems Part 2: Operating Conditions Section 1: Power Supply and Electromagnetic Compatibility-IEC 870-2-1: 1995; Supersedes BS 7404: Part 2: Section 2.1: 1991; |
BSI BS EN 60925 |
Performance Requirements for D.C.Supplied Electronic Ballasts for Tubular Fluorescent Lamps-AMD 13683: July 11, 2002; Supersedes BS 5717; |
BSI BS EN 60945 |
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
BSI BS EN 60947- 1 |
Low-voltage switchgear and controlgear Part 1: General rules-CORR 15485: February 8, 2005 |
BSI BS EN 60947- 2 |
Low-voltage switchgear and controlgear Part 2: Circuit-breakers |
BSI BS EN 60947- 3 |
Low-Voltage Switchgear and Controlgear - Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units-AMD 13240: April 05, 2002; |
BSI BS EN 60947-4- 1 |
Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor- Starters - Electromechanical Contactors and Motor-Starters-AMD 14559; August 15, 2003; Supersedes BS EN 60947-4-1:1992; |
BSI BS EN 60947-4- 2 |
Low-voltage switchgear and controlgear Part 4-2: Contactors and motor- starters AC semiconductor motor controllers and starters-AMD 13852: October 11, 2002; |
BSI BS EN 60947-4- 3 |
Low-Voltage Switchgear and Controlgear - Part 4.3: Contactors and Motor- Starters - AC Semiconductor Controllers and Contactors for Non-Motor Loads-IEC 60947-4-3: 1999; |
BSI BS EN 60947-5- 1 |
Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices-CORR 15484: January 31, 2005 |
BSI BS EN 60947-5- 2 |
Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches-AMD 10749: May 2000; AMD 15034: April 29, 2004 |
BSI BS EN 60947-5- 3 |
Low-Voltage Switchgear and Controlgear - Part 5-3: Control Circuit Devices and Switching Elements - Requirements for Proximity Devices with Defined Behaviour under Fault Conditions (PDF)-IEC 60947-5-3: 1999; |
BSI BS EN 60947-5- 6 |
Low-Voltage Switchgear and Controlgear - Part 5-6: Control Circuit Devices and Switching Elements - DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-IEC 60947-5-6:1999; |
BSI BS EN 60947-5- 7 |
Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output-Supersedes BS EN 50319:1999; |
BSI BS EN 60947-6- 1 |
Low-Voltage Switchgear and Controlgear Part 6: Multiple Function Equipment Section 1: Automatic Transfer Switching Equipment-AMD 9941: April 1998; |
BSI BS EN 60947-6- 2 |
Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment Control and protective switching devices (or equipment) (CPS) |
BSI BS EN 60947-7- 1 |
Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment Terminal blocks for copper conductors-CORR 14468: July 7, 2003; |
BSI BS EN 60947- 8 |
Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines |
BSI BS EN 60974- 10 |
Arc welding equipment Part 10: Electromagnetic compatibility (EMC) requirements-Supersedes BS EN 50199: 1996; |
BSI BS EN 61000-2- 10 |
Electromagnetic Compatibility (EMC) - Part 2-10: Environment - Description of HEMP Environment - Conducted Disturbance-IEC 61000-2-10: 1998; |
BSI BS EN 61000-2- 12 |
Electromagnetic compatibility (EMC) Part 2-12: Environment Compatibility levels for low-frequency conducted disturbances and signalling in public medium- voltage power supply systems |
BSI BS EN 61000-2- 2 |
Electromagnetic Compatibility (EMC) Part 2-2: Environment Compatibility Levels for Low-Frequency Conducted Disturbances and Signalling in Public Low-Voltage Power Supply Systems-Supersedes DD ENV 61000-2-2: 1993; |
BSI BS EN 61000-2- 4 |
Electromagnetic compatibility (EMC) Part 2-4: Environment Compatibility levels in industrial plants for low-frequency conducted disturbances |
BSI BS EN 61000-2- 9 |
Electromagnetic Compatibility (EMC) Part 2: Environment Section 9: Description of HEMP Environment - Radiated Disturbance - Basic EMC Publication-IEC 1000- 2-9: 1996; |
BSI BS EN 61000-3- 11 |
Electromagnetic Compatibility (EMC) - Part 3-11: Limits - Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems - Equipment with Rated Voltage Current Greater than or Equal to 75 A and Subject to Conditional |
BSI BS EN 61000-3- 2 |
Electromagnetic Compatibility (EMC) - Part 3-2: Limits - Limits for Harmonic Current Emissions (Equipment Input Current up to and Including 16 A Per Phase)- IEC 61000-3-2 ED.2:2000 |
BSI BS EN 61000-3- 3 |
Electromagnetic Compatibility (EMC) - Part 3: Limits - Section 3: Limitation of Voltage Changes, Voltage Fluctuations and Flicker in Public Low-Voltage Supply Systems, for Equipment with Rated Current Less Than or Equal to 16 A per Phase and Not Subject t |
BSI BS EN 61000-4- 1 |
Electromagnetic Compatibility (EMC) - Part 4-1: Testing and Measurement Techniques - Overview of IEC 61000-4 Series-IEC 61000-4-1:2000; Supersedes BS 6667 PART 1 |
BSI BS EN 61000-4- 10 |
Electromagnetic Compatibility (EMC) - Part 4-10: Testing and Measurement Techniques - Damped Oscillatory Magnetic Field Immunity Test-AMD 13192: October 5,2001; IEC 61000-4-10:1993; |
BSI BS EN 61000-4- 11 |
Electromagnetic compatibility (EMC) Part 4-11: Testing and measurement techniques Voltage dips, short interruptions and voltage variations immunity tests |
BSI BS EN 61000-4- 12 |
Electromagnetic Compatibility (EMC) - Part 4-12: Testing and Measurement Techniques - Oscillatory Waves Immunity Test-AMD 13190: October 11,2001; IEC 61000-4-12: 1995; |
BSI BS EN 61000-4- 13 |
Electromagnetic Compatibility (EMC) - Part 4-13: Testing and Measurement Techniques - Harmonics and Interharmonics Including Mains Signalling at a.c. Power Port, Low Frequency Immunity Tests-IEC 61000-4-13: 2002; |
BSI BS EN 61000-4- 14 |
Electromagnetic Compatibility (EMC) Part 4-14: Testing and measurement techniques Voltage fluctuation immunity test-AMD 15272:July 26, 2004; IEC 61000-4-14:1999 |
BSI BS EN 61000-4- 15 |
Electromagnetic compatibility (EMC) Part 4-15: Testing and measurement techniques Flickermeter Functional and design specifications-AMD 14654: November 6, 2003; IEC 61000-4-15:1997; |
BSI BS EN 61000-4- 16 |
Electromagnetic compatibility (EMC) Part 4-16: Testing and measurement techniques Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz-CORR 10059:May 1998; AMD 15273:July 2004; IEC 61000- 4-16: 1998; |
BSI BS EN 61000-4- 17 |
Electromagnetic compatibility (EMC) Part 4-17: Testing and measurement techniques Ripple on d.c. input power port immunity test-AMD 15274:July 26, 2004; IEC 61000-4-17:1999 |
BSI BS EN 61000-4- 2 |
Electromagnetic Compatibility (EMC) - Part 4.2: Testing and Measurement Techniques - Electrostatic Discharge Immunity Test-AMD 13187: September 28, 2001; IEC 61000-4-2: 1995; |
BSI BS EN 61000-4- 20 |
Electromagnetic compatibility (EMC) Part 4-20: Testing and measurement techniques Emission and immunity testing in transverse electromagnetic (TEM) waveguides |
BSI BS EN 61000-4- 21 |
Electromagnetic compatibility (EMC) Part 4-21: Testing and measurement techniques Reverberation chamber test methods |
BSI BS EN 61000-4- 23 |
Electromagnetic Compatibility (EMC) - Part 4-23: Testing and Measurement Techniques - Test Methods for Protective Devices for HEMP and Other Radiated Disturbances-CORR 13256:June 2001; IEC 61000-4-23:2000; |
BSI BS EN 61000-4- 24 |
Electromagnetic Compatibility (EMC) - Part 4: Testing and Measurement Techniques - Section 24: Test Methods for Protective Devices for HEMP Conducted Distrubance Basic EMC Publication-IEC 61000-4-24: 1997; |
BSI BS EN 61000-4- 25 |
Electromagnetic Compatibility (EMC) - Part 4-25: Testing and Measurement Techniques - HEMP Immunity Test Methods for Equipment and Systems-IEC 61000-4-25: 2001; |
BSI BS EN 61000-4- 27 |
Electromagnetic Compatibility (EMC) - Part 4-27: Testing and Measurement Techniques - Unbalance, Immunity Test-IEC 61000-4-27:2000; |
BSI BS EN 61000-4- 28 |
Electromagnetic compatibility (EMC) Part 4-28: Testing and measurement techniques Variation of power frequency, immunity test-AMD 15275:July 26, 2004; IEC 61000-4-28:1999 |
BSI BS EN 61000-4- 29 |
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on D.C. Input Power Port Immunity Tests-IEC 61000-4-29:2000; |
BSI BS EN 61000-4- 3 |
Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques Radiated, radio-frequency, electromagnetic field immunity test-AMD 14277: March 26,2003; AMD 15528: February 23, 2005; Supersedes BS 6667 PART 3 |
BSI BS EN 61000-4- 30 |
Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques Power quality measurement methods |
BSI BS EN 61000-4- 4 |
Electromagnetic compatibility (EMC) Part 4-4: Testing and measurement techniques Electrical fast transient/burst immunity test |
BSI BS EN 61000-4- 5 |
Electromagnetic Compatibility (EMC) - Part 4-5: Testing and Measurement Techniques - Surge Immunity Test-AMD 13146: September, 2001; IEC 61000-4-5: 1995; |
BSI BS EN 61000-4- 6 |
Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturbances, induced by radio-frequency fields-AMD 9500:May 1997; AMD 13165:October 11,2001; CORR 13608:December 18, 2001; AMD 15529:February 22, 200 |
BSI BS EN 61000-4- 7 |
Electromagnetic compatibility (EMC) Part 4-7: Testing and measurement techniques General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto-CORR 15316: August 18, 2004; CORR 1 |
BSI BS EN 61000-4- 8 |
Electromagnetic Compatibility (EMC) - Part 4-8: Testing and Measurement Techniques - Power Frequency Magnetic Field Immunity Test-AMD 13188: October 10,2001; IEC 61000-4-8: 1993; |
BSI BS EN 61000-4- 9 |
Electromagnetic Compatibility (EMC) - Part 4-9: Testing and Measurement Techniques - Pulse Magnetic Field Immunity Test-AMD 13059: October 30, 2001; IEC 61000- 4-9:1993 + A1:2000; |
BSI BS EN 61000-5- 5 |
Electromagnetic Compatibility (EMC) Part 5: Installation and Mitigation Guidelines Section 5: Specification of Protective Devices for HEMP Conducted Disturbance Basic EMC Publication-IEC 1000-5-5: 1996; |
BSI BS EN 61000-5- 7 |
Electromagnetic Compatibility - Part 5-7: Installation and Mitigation Guidelines - Degrees of Protection by Enclosures Against Electromagnetic Disturbances (EM Code) |
BSI BS EN 61000-6- 1 |
Electromagnetic Compatibility (EMC) - Part 6-1: Generic Standards - Immunity for Residential, Commercial and Light-Industrial Environments-Supersedes BS EN 50082-1:1998, Which Will Remain Current; IEC 61000-6-1:1997; |
BSI BS EN 61000-6- 3 |
Electromagnetic compatibility (EMC) Part 6-3: Generic standards Emission standard for residential, commercial and light-industrial environments-AMD 15429:November 12, 2004; CORR 15540:March 1, 2005; Supersedes BS EN 50081- 1:1992 |
BSI BS EN 61000-6- 4 |
Electromagnetic Compatibility (EMC) - Part 6-4: Generic Standards - Emission Standard for Industrial Environments-Supersedes BS EN 50081-2:1994, But Will Remain Current |
BSI BS EN 61008- 1 |
Electrical Accessories - Residual Current Operated Circuit-Breakers without Integral Overcurrent Protection for Household and Similar Uses (RCCB´s) - Part 1: General Rules-AMD 13141: December 18, 2001; Supersedes BS 4293: 1983 which remains current; |
BSI BS EN 61009- 1 |
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO s) Part 1: General rules |
BSI BS EN 61009- 1 |
Electrical accessories Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO s) Part 1: General rules- AMD 9084:December 1997; AMD 10285:April 1999; AMD 15548:April 24, 2005 |
BSI BS EN 61036 |
Alternating Current Static Watt-Hour Meters for Active Energy (Classes 1 and 2)-AMD 13676: August 9, 2002; Superseded by BS EN 62053-21: 2003 |
BSI BS EN 61037 |
Electricity Metering - Tariff and Load Control - Particular Requirements for Electronic Ripple Control Receivers-AMD 10354: July 1999; Renumbers BS 7401: 1990; Superseded by BS EN 62054-11:2004 |
BSI BS EN 61038 |
Time Switches for Tariff and Load Control-AMD 9357; January 1997; Superseded by BS EN 62054-21:2004 |
BSI BS EN 61047 |
DC or AC supplied electronic step-down convertors for filament lamps Performance requirements |
BSI BS EN 61131- 2 |
Programmable controllers Part 2: Equipment requirements and tests-AMD 15180:June 24, 2004 |
BSI BS EN 61204- 3 |
Low Voltage Power Supplies, D.C. Output - Part 3: Electromagnetic Compatibility (EMC)-CORR 14689: September 9, 2003; IEC 61204-3:2000; |
BSI BS EN 61268 |
Alternating Current Static Var-Hour Meters for Reactive Energy (Classes 2 and 3) |
BSI BS EN 61326 |
Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements-AMD 14445: June 25, 2004; AMD 13454: January 21,2002; AMD 10167: November 1998; IEC 61326:1997; |
BSI BS EN 61496- 1 |
Safety of Machinery - Electro-Sensitive Protective Equipment - Part 1: General Requirements and Tests |
BSI BS EN 61543 |
Residual Current- Operated Protective Devices (RCDs) for Household and Similar Use - Electromagnetic Compatibility-AMD 14834: December 2, 2003 |
BSI BS EN 61547 |
Equipment for General Lighting Purposes - EMC Immunity Requirements-AMD 13126: September 2001; IEC 61547: 1995; |
BSI BS EN 617 |
Continuous Handling Equipment and Systems - Safety and EMC Requirements for the Equipment for the Storage of Bulk Materials in Silos, Bunkers, Bins and Hoppers |
BSI BS EN 618 |
(FAULTY STANDARD) 2002 Continuous Handling Equipment and Systems - Safety and EMC Requirements for Equipment for Mechanical Handling of Bulk Materials Except Fixed Belt Conveyors |
BSI BS EN 61800- 3 |
Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods |
BSI BS EN 61812- 1 |
Specified Time Relays for Industrial Use - Part 1: Requirements and Tests- AMD 10542: March 2000 |
BSI BS EN 619 |
Continuous handling equipment and systems Safety and EMC requirements for equipment for mechanical handling of unit loads |
BSI BS EN 61993- 1 |
Maritime Navigation and Radiocommunication Equipment and Systems - Part 1: Shipbourne Automatic Transponder System Installation Using VHF Digital Selective Calling (DSC) Techniques - Operational and Performance Requirements, Methods of Testing and Require |
BSI BS EN 620 |
Continuous handling equipment and systems Safety and EMC requirements for fixed belt conveyors for bulk materials-CORR 14439:April 3, 2003; |
BSI BS EN 62020 |
Electrical Accessories - Residual Curent Monitors for Household and Similar Uses (RCMs)-IEC 62020: 1998; |
BSI BS EN 62041 |
Power transformers, power supply units, reactors and similar products EMC requirements |
BSI BS EN 62052- 11 |
Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment |
BSI BS EN 62052- 21 |
Electricity metering equipment (a.c.) General requirements, tests and test conditions Part 21: Tariff and load control equipment-CORR 15616: December 12, 2005 |
BSI BS EN 62053- 11 |
Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)-CORR 15025: February 24, 2004; (IEC 62053-11:2003) |
BSI BS EN 62053- 21 |
Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2)-CORR 15026: February 24, 2004; |
BSI BS EN 62053- 22 |
Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)-CORR 15027: February 24, 2004; (IEC 62053-22:2003) |
BSI BS EN 62053- 23 |
Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3)-CORR 15024: February 24, 2004 |
BSI BS EN 62054- 11 |
Electricity metering (a.c.) Tariff and load control Part 11: Particular requirements for electronic ripple control receivers-CORR 15615: October 31, 2005 |
BSI BS EN ISO 14982 |
Agricultural and Forestry Machinery - Electromagnetic Compatibility - Test Methods and Acceptance Criteria |
CEN EN 12015 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission |
CEN EN 12016 |
Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity |
CEN EN 12016 |
Electromagnetic Compatibilty - Product Family Standard for Lifts, Escalators and Passenger Conveyors - Immunity |
CEN EN ISO 14982 |
Agricultural and Forestry Machines - Electromagnetic Compatibility - Test Methods and Acceptance Criteria-ISO 14982:1998 |
CENELEC EN 60947-4- 1 |
Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor- Starters - Electromechanical Contactors and Motor-Starters-IEC 60947-4-1: 2000; Amendment A1: December 2002 |
CENELEC PREN 50121- 1 |
Railway Applications - Electromagnetic Compatibility Part 1: General |
CENELEC PREN 50121- 2 |
Railway Applications - Electromagnetic Compatibility Part 2: Emission of the Whole Railway System to the Outside World |
CENELEC PREN 50121- 3-1 |
Railway applications - Electromagnetic compatibility Part 3-1: Rolling stock - Train and complete vehicle |
CENELEC PREN 50121- 3-2 |
Railway Applications - Electromagnetic Compatibility Part 3-2: Rolling Stock - Apparatus |
CENELEC PREN 50121- 4 |
Railway applications - Electromagnetic compatibility Part 4: Emission and immunity of the signalling and telecommunications apparatus |
CENELEC PREN 50121- 5 |
Railway applications - Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and apparatus |
CENELEC PREN 50443 |
Bahnanwendungen - Ortsfeste Anlagen - Auswirkungen von elektromagnetischen Störungen von Wechselstrombahnleitungen auf Rohrleitungen - Zulässige Werte und Schutzmaßnahmen |
ETSI EN 300 065- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Narrow-Band Direct-Printing Telegraph Equipment for Receiving Meteorological or Navigational Information (NAVTEX); Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive- V1.1.1 |
ETSI EN 300 065- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Narrow-Band Direct-Printing Telegraph Equipment for Receiving Meteorological or Navigational Information (NAVTEX); Part 3: Harmonized EN under Article 3.3 (e) of the R&TTE Directive- V1.1.1 |
ETSI EN 300 086- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment with an Internal or External RF Connector Intended Primarily for Analogue Speech; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 |
ETSI EN 300 113- 2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Land mobile service; Radio equipment intended for the transmission of data (and/or speech) using constant or non-constant envelope modulation and having an antenna connector; Part 2: Harmoniz |
ETSI EN 300 152- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Maritime Emergency Position Indicating Radio Beacons (EPIRBs) Intended for Use on the Frequency 121,5 MHz or the Frequencies 121,5 MHz and 243 MHz for Homing Purposes Only; Part 3: Harmonized |
ETSI EN 300 162- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radiotelephone Transmitters and Receivers for the Maritime Mobile Service Operating in VHF Bands; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive-V1.1.2 |
ETSI EN 300 162- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radiotelephone Transmitters and Receivers for the Maritime Mobile Service Operating in VHF Bands; Part 3: Harmonized EN Covering Essential Requirements of Article 3.3 (e) of the R&TTE Directi |
ETSI EN 300 219- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment Transmitting Signals to Initiate a Specific Response in the Receiver; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 of the R&TTE |
ETSI EN 300 220- 1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mW; Part 1: Technical characteristics and test methods-V1. |
ETSI EN 300 220- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices;(SRD); Radio Equipment to Be Used in the 25 MHz to 1 000 MHz Frequency Range with Power Levels Ranging up to 500 mW; Part 2: Supplementary Parameters Not Intended for Conf |
ETSI EN 300 220- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Radio Equipment to Be Used in the 25 MHz to 1 000 MHz Frequency Range with Power Levels Ranging up tp 500 mW; Part 3: Harmonized EN Covering Essential Requirements |
ETSI EN 300 224- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); On- Site Paging Service; Part 2: Harmonized EN Under Article 3.2 of the R&TTE Directive- V1.1.1 |
ETSI EN 300 279 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Private Land Mobile Radio (PMR) and Ancillary Equipment (Speech and/or Non-Speech)-V1.2.1 |
ETSI EN 300 296- 2 |
Electomagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment Using Integral Antennas Intended Primarily for Analogue Speech; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 of the R&TTE Direct |
ETSI EN 300 328 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering essential requirements under art |
ETSI EN 300 328- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Wideband Transmission Systems; Data Transmission Equipment Operating in the 2,4 GHz ISM Band and Using Spread Spectrum Modulation Techniques; Part 2: Harmonized EN Covering Essential Requirem |
ETSI EN 300 330- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Radio Equipment in the Frequency Range 9 kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of |
ETSI EN 300 330- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Radio Equipment in the Frequency Range 9 kHz to 25 MHz and Inductive Loop Systems in the Frequency Range 9 kHz to 30 MHz; Part 2: Harmonized EN under Article 3.2 of |
ETSI EN 300 339 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); General ElectroMagnetic Compatibility (EMC) for Radio Communications Equipment- V1.1.1 |
ETSI EN 300 341- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service (RP 02); Radio Equipment Using an Integral Antenna Transmitting Signals to Initiate a Specific Response in the Receiver; Part 2: Harmonized EN Under Article 3.2 of the R&T |
ETSI EN 300 373- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Maritime Mobile Transmitters and Receivers for Use in the MF and HF Bands; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive- V1.1.1 |
ETSI EN 300 373- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Maritime Mobile Transmitters and Receivers for Use in the MF and HF Bands; Part 3: Harmonized EN covering essential requirements under article 3.3(e) of the R&TTE Directive- V1.1.1 |
ETSI EN 300 385 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Fixed Radio Links and Ancillary Equipment- V1.2.1 |
ETSI EN 300 386 |
Electomagnetic Compatibility and Radio Spectrum Matters (ERM); Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) Requirements- V1.2.1 |
ETSI EN 300 386 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) Requirements- V1.3.2 |
ETSI EN 300 386 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) Requirements- V1.3.1 |
ETSI EN 300 386- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Telecommunication Network Equipment; ElectroMagnetic Compatibility (EMC) Requirements; Part 2: Product Family Standard-V1.1.3 |
ETSI EN 300 390- 2 |
Electronic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment Intended for the Transmission of Data (and Speech) and Using an Integral Antenna; Part 2: Harmonized EN Covering Essential Requirements Under Article 3.2 of th |
ETSI EN 300 422- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Wireless Microphones in the 25 MHz to 3 GHz Frequency Range; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive-V1.1.1 |
ETSI EN 300 433- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Double Side Band (DSB) and/or Single Side Band (SSB) Amplitude Modulated Citizen´s Band Radio Equipment; Part 2: Harmonized EN Covering Essential Requirements under Arti |
ETSI EN 300 440- 2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short range devices; Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive-V1.1.2 |
ETSI EN 300 454- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Wide Band Audio Links; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive- V1.1.1 |
ETSI EN 300 471- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Rules for Access and the Sharing of Common Used Channels by Equipment Complying with EN 300 113; Part 2: Harmonized EN Covering Essential Requirements under Article 3.2 o |
ETSI EN 300 673 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Very Small Aperture Terminal (VSAT), Satellite News Gathering (SNG), Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) |
ETSI EN 300 674-2- 1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and M |
ETSI EN 300 674-2- 2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Road Transport and Traffic Telematics (RTTT); Dedicated Short Range Communication (DSRC) transmission equipment (500 kbit/s / 250 kbit/s) operating in the 5,8 GHz Industrial, Scientific and M |
ETSI EN 300 698- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radio Telephone Transmitters and Receivers for the Maritime Mobile Service Operating in the VHF Bands Used on Inland Waterways; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive- |
ETSI EN 300 698- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Radio Telephone Transmitters and Receivers for the Maritime Mobile Service Operating in the VHF Bands Used on Inland Waterways; Part 3: Harmonized EN Covering Essential Requirements of Articl |
ETSI EN 300 718- 2 |
Electromagnetic Compatability and Radio Spectrum Matters (ERM); Avalanche Beacons; Transmitter-Receiver Systems; Part 2: Harmonized EN Covering Essential Requirements of Article 3.2 of the R&TTE Directive-V1.1.1 |
ETSI EN 300 718- 3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Avalanche Beacons; Transmitter-receiver systems; Part 3: Harmonized EN covering essential requirements of article 3.3e of the R&TTE Directive-V1.2.1 |
ETSI EN 300 720- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Ultra- High Frequency (UHF) On-Board Communications Systems and Equipment; Part 2: Harmonized EN under Article 3.2 of the R&TTE Directive-V1.1.1 |
ETSI EN 300 761- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Short Range Devices (SRD); Automatic Vehicle Identification (AVI) for Railways Operating in the 2,45 GHz Frequency Range; Part 2: Harmonized Standard Covering Essential Requirements under Art |
ETSI EN 300 827 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Terrestrial Trunked Radio (TETRA) and Ancillary Equipment-V1.1.1 |
ETSI EN 300 828 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Radiotelephone Transmitters and Receivers for the Maritime Mobile Service Operating in the VHF Bands-V1.1.1 |
ETSI EN 300 829 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Maritime Mobile Earth Stations (MMES) Operating in the 1,5/1,6 GHz Bands Providing Low Bit Rate Data Communications (LBRDC) for the Global Maritime Dis |
ETSI EN 300 830 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Receive Only Mobile Earth Stations (ROMES) Operating in the 1,5 GHz Band Providing Data Communications-V1.1.1 |
ETSI EN 300 831 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) Used within Satellite Personal Communications Networks (S-PCN) Operating in the 1,5/1,6/2,4 GHz and 2 GHz Frequency Bands-V |
ETSI EN 300 832 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) for Mobile Earth Stations (MES) Providing Low Bit Rate Data Communications (LBRDC) Using Satellites in Low Earth Orbits (LEO) Operating in Frequency Bands |
ETSI EN 301 011 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Narrow-Band Direct-Printing (NBDP) NAVTEX Receivers Operating in the Maritime Mobile Service-V1.1.1 |
ETSI EN 301 025- 2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 2: Harmonized EN under article 3.2 of the R&TTE Directive- |
ETSI EN 301 025- 3 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF radiotelephone equipment for general communications and associated equipment for Class "D" Digital Selective Calling (DSC); Part 3: Harmonized EN under article 3.3(e) of the R&TTE Directi |
ETSI EN 301 090 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Maritime Radiotelephone Watch Receivers Operating on 2 182 kHz-V1.1.1 |
ETSI EN 301 091- 2 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices; Road Transport and Traffic Telematics (RTTT); Radar equipment operating in the 76 GHz to 77 GHz range; Part 2: Harmonized EN covering essential requirements of article 3. |
ETSI EN 301 166- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Land Mobile Service; Radio Equipment for Analogue and /or Digital Communication (Speech and/or Data) and Operating on Narrow Band Channels and Having an Antenna Connector; Part 2: Harmonized |
ETSI EN 301 178- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Portable Very High Frequency (VHF) Radiotelephone Equipment for the Maritime Mobile Service Operating in the VHF Bands (for Non-GMDSS Applications Only); Part 2: Harmonized EN under Article 3 |
ETSI EN 301 357- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Cordless Audio Devices in the Range 25 MHz to 2 000 MHz; Consumer Radio Microphones and In-Ear Monitoring Systems Operating in the CEPT Harmonized Band 863 MHz to 865 MHz; Part 2: Harmonized |
ETSI EN 301 360 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) transmitting towards geostationary satellites in the 27,5 GHz to 29,5 GHz frequency bands covering essential requirement |
ETSI EN 301 360 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) Transmitting Towards Geostationary Satellites in the 27,5 GHz to 29,5 GHz Frequency Bands Covering Essential Requirement |
ETSI EN 301 360 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) Transmitting Towards Geostationary Satellites in the 27,5 GHz to 29,5 GHz Frequency Bands Covering Essential Requirement |
ETSI EN 301 406 |
Digital Enhanced Cordless Telecommunications (DECT); Harmonized EN for Digital Enhanced Cordless Telecommunications (DECT) covering essential requirements under article 3.2 of the R&TTE Directive; Generic radio-V1.5.1 |
ETSI EN 301 419- 1 |
Digital Cellular Telecommunications System (Phase 2); Attachment Requirements for Global System for Mobile Communications (GSM); Part 1: Mobile Stations in the GSM 900 and DCS 1 800 Bands; Access-GSM 13.01 Version 4.1.1 |
ETSI EN 301 419- 2 |
Digital Cellular Telecommunications System (Phase 2+); Attachment Requirements for Global System for Mobile Communications (GSM); High Speed Circuit Switched Data (HSCSD) Multislot Mobile Stations; Access-GSM 13.34 Version 5.1.1 Release 1996 |
ETSI EN 301 419- 3 |
Digital Cellular Telecommunications System (Phase 2+); Attachment Requirements for Global System for Mobile Communications (GSM); Advanced Speech Call Items (ASCI); Mobile Stations; Access-GSM 13.68 Version 5.0.2 Release 1996 |
ETSI EN 301 419- 7 |
Digital Cellular Telecommunications System (Phase 2+); Attachment Requirements for Global System for Mobile Communications (GSM); Railways Band (R-GSM); Mobile Stations; Access-GSM 13.67 Version 5.1.1 Released 1996 |
ETSI EN 301 423 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); Harmonized Standard for the Terrestrial Flight Telecommunications System Under Article 3.2 of the R&TTE Directive-V1.1.1 |
ETSI EN 301 426 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Low Data Rate Land Mobile Satellite Earth Stations (LMES) and Maritime Mobile Satellite Earth Stations (MMES) Not Intended for Distress and Safety Communications Operating in the 1,5/1,6 GHz Fr |
ETSI EN 301 427 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Low Data Rate Mobile Satellite Earth Stations (MESs) Except Aeronautical Mobile Satellite Earth Stations, Operating in the 11/12/14 GHz Frequency Bands Covering Essential Requirements under Art |
ETSI EN 301 428 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-Only, Transmit/Receive or Receive-Only Satellite Earth Stations Operating in the 11/12/14 GHz Frequency Bands Covering Essential Requirements under |
ETSI EN 301 428 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit/receive or receive-only satellite earth stations operating in the 11/12/14 GHz frequency bands covering essential requirements under |
ETSI EN 301 430 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite News Gathering Transportable Earth Stations (SNG TES) Operating in the 11-12/13- 14 GHz Frequency Bands Covering Essential Requirements under Article 3.2 of the R&TTE Directive-V1.1.1 |
ETSI EN 301 441 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), Including Handheld Earth Stations, for Satellite Personal Communications Networks (S-PCN) in the 1,6/2,4 GHz Bands under the Mobile Satellite Service (MSS) Coverin |
ETSI EN 301 442 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Mobile Earth Stations (MESs), Including Handheld Earth Stations, for Satellite Personal Communications Networks (S-PCN) in the 2,0 GHz Bands under the Mobile Satellite Service (MSS) Covering Es |
ETSI EN 301 443 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperature Terminal (VSAT); Transmit-Only, Transmit-and-Receive, Receive-Only Satellite Earth Stations Operating in the 4 GHz and 6 GHz Frequency Bands Covering Essential Requirements |
ETSI EN 301 443 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperture Terminal (VSAT); Transmit-only, transmit-and-receive, receive-only satellite earth stations operating in the 4 GHz and 6 GHz frequency bands covering essential requirements |
ETSI EN 301 443 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Very Small Aperature Terminal (VSAT); Transmit-Only, Transmit-and-Receive, Receive-Only Satellite Earth Stations Operating in the 4 GHz and 6 GHz Frequency Bands Covering Essential Requirements |
ETSI EN 301 444 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Land Mobile Earth Stations (LMES) Operating in the 1,5 GHz and 1,6 GHz Bands Providing Voice and/or Data Communications Covering Essential Requirements under Article 3.2 of the R&TTE Directive- |
ETSI EN 301 449 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); Harmonized EN for CDMA spread spectrum base stations operating in the 450 MHz cellular band (CDMA 450) and 410, 450 and 870 MHz PAMR bands (CDMA-PAMR) covering essential requirements of artic |
ETSI EN 301 459 |
Satellite Earth Stations and Systems (SES); Harmonized EN for Satellite Interactive Terminals (SIT) and Satellite User Terminals (SUT) Transmitting Towards Satellites in Geostationary Orbit in the 29,5 to 30,0 GHz Frequency Bands Covering Essential Requir |
ETSI EN 301 489- 1 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements-V1.5.1 |
ETSI EN 301 489- 10 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 10: Specific Conditions for First (CT1 and CT1+) and Second Generation Cordless Telephone (CT2) Equipment-V |
ETSI EN 301 489- 11 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 11: Specific Conditions for Terrestrial Sound Broadcasting Service Transmitters-V1.2.1 |
ETSI EN 301 489- 12 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 12: Specific conditions for Very Small Aperture Terminal, Satellite Interactive Earth Stations Operated in |
ETSI EN 301 489- 13 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 13: Specific Conditions For Citizens´ Band (CB) Radio and Ancillary Equipment (Speech and Non-Speech)-V1.2 |
ETSI EN 301 489- 14 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC); standard for radio equipment and services; Part 14: Specific conditions for analogue and digital terrestrial TV broadcasting service transmitters- V1.2.1 |
ETSI EN 301 489- 15 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 15: Specific Conditions for Commercially Available Amateur Radio Equipment-V1.2.1 |
ETSI EN 301 489- 16 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 16: Specific Conditions for Analogue Cellular Radio Communications Equipment, Mobile and Portable-V1.2.1 |
ETSI EN 301 489- 17 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 17: Specific Conditions for 2,4 GHz Wideband Transmission Systems and 5 GHz High Performance RLAN Equipment |
ETSI EN 301 489- 18 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 18 Specific Conditions for Terrestrial Trunked Radio (TETRA) Equipment-V1.3.1 |
ETSI EN 301 489- 18 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 18 Specific Conditions for Terrestrial Trunked Radio (TETRA) Equipment-V1.1.1 |
ETSI EN 301 489- 19 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 19: Specific Conditions for Receive Only Mobile Earth Stations (ROMES) Operating in the 1,5 GHz Band Provid |
ETSI EN 301 489- 2 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 2: Specific Conditions for Radio Paging Equipment-V1.3.1 |
ETSI EN 301 489- 20 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 20: Specific Conditions for Mobile Earth Stations (MES) Used in the Mobile Satellite Services (MSS)-V1.2.1 |
ETSI EN 301 489- 22 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 22: Specific conditions for ground based VHF aeronautical mobile and fixed radio equipment- V1.3.1 |
ETSI EN 301 489- 23 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 23: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) Base Station (BS) Radio, Repeater and Ancill |
ETSI EN 301 489- 24 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 24: Specific Conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and Portable (UE) Radio and Ancil |
ETSI EN 301 489- 25 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 25: Specific conditions for IMT-2000 CDMA Multi-carrier Mobile Stations and ancillary equipment- V2.2.1 |
ETSI EN 301 489- 26 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 26: Specific conditions for CDMA 1x spread spectrum Base Stations, repeaters and ancillary equipment-V2.3.2 |
ETSI EN 301 489- 27 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 27: Specific conditions for Ultra Low Power Active Medical Implants (ULP-AMI) and related peripheral device |
ETSI EN 301 489- 28 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 28: Specific conditions for wireless digital video links-V1.1.1 |
ETSI EN 301 489- 3 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 3: Specific Conditions for Short-Range Devices (SRD) Operating on Frequencies between 9 KHz and 40 GHz-V1.4 |
ETSI EN 301 489- 31 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 to 315 kHz band for Ultra Low Power Active Medical Implants |
ETSI EN 301 489- 31 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 31: Specific conditions for equipment in the 9 kHz to 315 kHz band for Ultra Low Power Active Medical Impla |
ETSI EN 301 489- 32 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 32: Specific conditions for Ground and Wall Probing Radar applications-V1.1.1 |
ETSI EN 301 489- 32 |
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 32: Specific conditions for Ground and Wall Probing Radar applications-V1.1.1 |
ETSI EN 301 489- 4 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 4: Specific Conditions for Fixed Radio Links and Ancillary Equipment and Services- V1.3.1 |
ETSI EN 301 489- 5 |
Electromagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 5: Specific Conditions for Private Land Mobile Radio (PMR) and Ancillary Equipment (Speech and Non-Speech)- |
ETSI EN 301 489- 6 |
ElectroMagnetic Compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) Standard for Radio Equipment and Services; Part 6: Specific Conditions for Digital Enhanced Cordless Telecommunications (DECT) Equipment- V1.2.1 |