|
TIA 455- 174 |
FOTP-174 Mode Field Diameter of Single-Mode Optical Fiber by Knife- Edge Scanning in the Far Field |
|
TIA EIA/TIA-455- 12A |
FOTP-12 Fluid Immersion Test for Fiber Optic Components-Replaces 455-40-83 |
|
TIA EIA/TIA-455- 185 |
FOTP-185 Strength of Coupling Mechanism for Fiber Optic Interconnecting Devices |
|
TIA EIA/TIA-455- 3A |
FOTP-3 Procedure to Measure Temperature Cycling Effects on Optical Fibers, Optical Cable, and Other Passive Fiber Optic Components-Replaces 455-52- 83 |
|
TIA EIA/TIA-455- 42A |
FOTP-42 Optical Crosstalk in Fiber Optic Components |
|
TIA EIA/TIA-455- 69A |
FOTP-69 Test Procedure for Evaluating the Effect of Minimum and Maximum Exposure Temperatures on the Optical Performance of Optical Fibers |
|
TIA EIA/TIA-455- 98A |
FOTP-98 Fiber Optic Cable External Freezing Test |
|
TIA EIA-455- 179 |
FOTP-179 Inspection of Cleaved Fiber End Faces by Interferometry |
|
TIA SP 3- 0076 |
FOCIS17 Fiber Optic Connector Intermateability Standard, Type MU- To be published as TIA-604-17 |
|
TIA SP3135 |
FOTP-156 Measurement of the Optical Fiber Coefficients of a Fiber Optic Switch-Comment Period Expires: March 12, 2001; TIA/EIA-455-156 |
|
TIA SP32839- RF1 |
FOTP-177 Numerical Aperature Measurement of Graded-Index Optical Fibers-Comment Period Expires: June 8, 2001; TIA/EIA-177A |
|
TIA SP3-2839- URV2 |
FOTP-177 IEC-60793-1-43 Measurement Methods and Test Procedures-Numerical Aperture-Comment Period Expires July 21, 2003; TIA-455-177- B |
|
TIA SP32870- RV2 |
FOTP-33 Optical Fiber Cable Tensile Loading and Bending Test- Comment Period Expires: June 25, 2001; TIA/EIA-455-33B |
|
TIA SP3-4464-UGR- 1 |
Lawfully Authorized Electronic Surveillance-Comment Period Expires: December 27, 2002; ANSI/J-STD-025-A |
|
TIA SP3-4637- RV3 |
FOTP-5 Humidity Test Procedure for Fiber Optic Components- Comment Period Expires: April 9, 2002; TIA/EIA-455-5C |
|
TIA SP3-4638- RV3 |
FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables-Comment Period Expires: April 8, 2002; TIA/EIA-455-11B |
|
TIA TIA/EIA/IS- 848 |
Enhanced Charging Services |
|
TIA TIA/EIA-455- 113 |
FOTP-113 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by the Fixed Analyzer Method |
|
TIA TIA/EIA-455- 11C |
FOTP-11 Vibration Test Procedure for Fiber Optic Components and Cables |
|
TIA TIA/EIA-455- 126 |
FOTP-126 Specitral Characterization of LEDs |
|
TIA TIA/EIA-455- 130 |
FOTP-130 Elevated Temperature Life Test for Laser Diodes |
|
TIA TIA/EIA-455- 132A |
FOTP-132 Measurement of the Effective Area of Single-Mode Optical Fiber-Revision of TIA/EIA-455-132 |
|
TIA TIA/EIA-455- 157 |
FOTP-157 Measurement of Polarization Dependent Loss (PDL) of Single-Mode Fiber Optic Components |
|
TIA TIA/EIA-455- 158 |
FOTP-158 Measurement of Breakaway Frictional Force in Fiber Optic Connector Alignment Sleeves |
|
TIA TIA/EIA-455- 162A |
FOTP-162 Fiber Optic Cable Temperature-Humidity Cycling |
|
TIA TIA/EIA-455- 16A |
FOTP-16 Salt Spray (Corrosion) Test for Fiber Optic Components |
|
TIA TIA/EIA-455- 171A |
FOTP-171 Attenuation by Substitution Measurement for Short-Length Multimode Graded-Index and Single Mode Optical Fiber Cable Assemblies-Upgrade and Revision of TIA/EIA-455-171 |
|
TIA TIA/EIA-455- 173 |
FOTP-173 Coating Geometry Measurement for Optical Fiber Side-View Method |
|
TIA TIA/EIA-455-180- A |
FOTP-180 Measurement of the Optical Transfer Coefficients of a Passive Branching Device (Coupler) |
|
TIA TIA/EIA-455- 184 |
FOTP-184 Coupling Proof Overload Test for Fiber Optic Interconnecting Devices |
|
TIA TIA/EIA-455- 188 |
FOTP-188 Low Temperature Testing of Fiber Optic Components |
|
TIA TIA/EIA-455- 194 |
FOTP-194 Measurement of Fiber Pushback in Optical Connectors |
|
TIA TIA/EIA-455- 196 |
FOTP-196 Guideline for Polarization - Mode Measurement in Single - Mode Fiber Optic Components and Devices |
|
TIA TIA/EIA-455- 197 |
FOTP-197 Differential Group Delay Measurement of Single-Mode Components and Devices by the Differential Phase Shift Method |
|
TIA TIA/EIA-455- 1B |
FOTP-1 Cable Flexing for Fiber Optic Interconnecting Devices |
|
TIA TIA/EIA-455- 200 |
FOTP-200 Insertion Loss of Connectorized Polarization-Maintaining Fiber or Polarizing Fiber Pigtailed Devices and Cable Assemblies |
|
TIA TIA/EIA-455- 201 |
FOTP-201 Return Loss of Connectorized Polarization-Maintaining Fiber of Polarizing Fiber Pigtailed Devices and Cable Assemblies |
|
TIA TIA/EIA-455- 203 |
FOTP-203 Launched Power Distribution Measurement Procedure for Graded-Index Multimode Fiber Transmitters |
|
TIA TIA/EIA-455- 204 |
FOTP-204 Measurement of Bandwidth on Multimode Fiber |
|
TIA TIA/EIA-455- 221 |
FOTP-221-IEC 61290-5-1 - Optical Fiber Amplifiers - Basic Specification - Part 5-1: Test Method for Reflectance Parameters - Optical Spectrum Analyzer |
|
TIA TIA/EIA-455- 222 |
FOTP-222 IEC 61290-3 Optical Fiber Amplifiers Basic Specification Part 3: Test Methods for Noise Figure Parameters |
|
TIA TIA/EIA-455- 223 |
FOTP-223 - IEC 61291-2 - Optical Fiber Amplifiers - Part 2: Digital Applications - Performance Specification Template |
|
TIA TIA/EIA-455- 25C |
FOTP-25 Impact Testing of Optical Fiber Cables |
|
TIA TIA/EIA-455- 2C |
FOTP-2 Impact Test Measurements for Fiber Optic Devices |
|
TIA TIA/EIA-455- 32A |
FOTP-32 Fiber Optic Circuit Discontinuities |
|
TIA TIA/EIA-455- 34A |
FOTP-34 Interconnection Device Insertion Loss Test |
|
TIA TIA/EIA-455- 35A |
FOTP-35 Fiber Optic Component Dust (Fine Sand) Test |
|
TIA TIA/EIA-455- 41A |
FOTP-41 Compressive Loading Resistance of Fiber Optic Cables |
|
TIA TIA/EIA-455- 4C |
FOTP-4 Fiber Optic Component Temperature Life Test |
|
TIA TIA/EIA-455- 54B |
FOTP-54 Mode Scrambler Requirements for Overfilled Launching Conditions to Multimode Fibers |
|
TIA TIA/EIA-455- 5C |
FOTP-5 Humidity Test Procedure for Fiber Optic Components |
|
TIA TIA/EIA-455- 71A |
FOTP-71 Procedure to Measure Temperature-Shock Effects on Fiber Optic Components |
|
TIA TIA/EIA-455- 72 |
FOTP-72 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Optical Characteristics of Optical Fibers |
|
TIA TIA/EIA-455- 73 |
FOTP-73 Procedure for Assessing Temperature and Humidity Cycling Exposure Effects on Mechanical Characteristics of Optical Fibers |
|
TIA TIA/EIA-455- 8 |
FOTP-8 Measurement of Splice or Connector Loss and Reflectance Using an OTDR |
|
TIA TIA/EIA-455- 81B |
FOTP-81 Compound Flow (Drip) Test for Filled Fiber Optic Cable |
|
TIA TIA/EIA-455- 88 |
FOTP-88 Fiber Optic Cable Bend Test |
|
TIA TIA/EIA-455- B |
Standard Test Procedure for Fiber Optic Fibers, Cables, Transducers, Sensors, Connecting and Terminating Devices, and Other Fiber Optic Components |
|
TIA TIA/EIA- 509 |
Generic Specification for Fiber Optic Terminal Devices-Errata |
|
TIA TIA/EIA-526- 19 |
OFSTP-19 Optical Signal-to-Noise Ratio Measurement Procedures for Dense Wavelength-Division Multiplexed Systems |
|
TIA TIA/EIA-568- B.3 |
Optical Fiber Cabling Components Standard |
|
TIA TIA/EIA- 604 |
Fiber Optic Connector Intermateability Standards (FOCIS) |
|
TIA TIA/EIA-604- 10A |
FOCIS 10 Fiber Optic Connector Intermateability Standard - Type LC |
|
TIA TIA/EIA-604- 12 |
FOCIS 12 Fiber Optic Connector Intermateability Standard Type MT- RJ |
|
TIA TIA/EIA-604- 6 |
FOCIS 6 Fiber Optic Connector Intermateability Standard (Fiber Jack Connector) |
|
TIA TIA/EIA- 626 |
Multimode Fiber-Optic Link Transmission Design |
|
TIA TIA-440- B |
Fiber Optic Terminology |
|
TIA TIA-455-100- A |
FOTP-100 Gas Leakage Test for Gas-Blocked Fiber Optic Cables |
|
TIA TIA-455-104- A |
FOTP-104 Fiber Optic Cable Cyclic Flexing Test |
|
TIA TIA-455- 106 |
FOTP 106 Procedures for Determining Threshold Current of Semiconductor Lasers-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455-107- A |
FOTP-107 Determination of Component Reflectance or Link/System Return Loss Using a Loss Test Set-Revision of EIA/TIA-455-107 |
|
TIA TIA-455-111- A |
FOTP-111 IEC-60793-1-34 Optical Fibres Part 1-34: Measurement Methods and Test Procedures Fibre Curl |
|
TIA TIA-455-122- A |
FOTP-122 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by Stokes Parameter Evaluation |
|
TIA TIA-455- 123 |
FOTP-123 Measurement of Optical Fiber Ribbon Dimensions |
|
TIA TIA-455-124- A |
FOTP124 Polarization-Mode Dispersion Measurement for Single-Mode Optical Fibers by Interferometry |
|
TIA TIA-455- 127 |
FOTP-127 Spectral Characterization of Multimode Laser Diodes |
|
TIA TIA-455- 128 |
FOTP 128 Procedures for Determining Threshold Current of Semiconductor Lasers-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455- 129 |
FOTP-129 Procedures for Applying Human Body Model Electrostatic Discharge Stress to Package Optoelectronic Components |
|
TIA TIA-455- 131 |
FOTP-131 Measurement of Optical Fiber Ribbon Residual Twist |
|
TIA TIA-455-133- A |
FOTP-133 IEC-60793-1-22 Optical Fibres Part 1-22: Measurement Methods and Test Procedures Length Measurement |
|
TIA TIA-455- 134 |
FOTP-134 Measurement of Connector Ferrule Hole Inside Diameter |
|
TIA TIA-455- 135 |
FOTP-135 Mesurement of Connector Ferrule Inside and Outside Diameter Circular Runout |
|
TIA TIA-455-13- A |
FOTP-13 Visual and Mechanical Inspection of Fiber Optic Components, Devices, and Assemblies |
|
TIA TIA-455- 141 |
FOTP-141 Twist Test for Optical Fiber Ribbons |
|
TIA TIA-455-14- A |
FOTP-14 Fiber Optic Shock Tests (Specified Pulse) |
|
TIA TIA-455- 15A |
FOTP-15 Altitude/Immersion of Fiber Optic Components |
|
TIA TIA-455-160- A |
FOTP-160 IEC-60793-1-50 Optical Fibres Part 1-50: Measurement Methods and Test Procedures Damp Heat (Steady State)-THIS STANDARDS REPLACES TIA/EIA-455-161 |
|
TIA TIA-455- 172 |
FOTP-172 Flame Resistance of Firewall Connector |
|
TIA TIA-455-175- B |
FOTP-175 IEC-60793-1-42 Optical Fibres Part 1-42: Measurement Methods and Test Procedures Chromatic Dispersion |
|
TIA TIA-455-176- A |
FOTP-176 IEC-60793-1-20 Optical Fibres Part 1-20: Measurement Methods and Test Procedures Fibre Geometry-Replaces EIA/TIA-455-29A:1989, TIA/EIA- 455-43A:1999, TIA-455-44-B:1992, EIA/TIA-455-45B:1992, TIA/EIA-455-58B:2001, and TIA/EIA-455-92:1992 |
|
TIA TIA-455- 183 |
FOTP-183 Hydrogen Effects on Optical Fiber Cable |
|
TIA TIA-455- 186 |
FOTP-186 Gauge Retention Force Measurement for Fiber Optic Components |
|
TIA TIA-455- 187 |
FOTP-187 Engagement and Separation Force Measurement of Fiber Optic Connector Sets |
|
TIA TIA-455- 189 |
FOTP-189 Ozone Exposure Test for Fiber Optic Components |
|
TIA TIA-455- 190 |
FOTP-190 Low Air Pressure (High Altitude) Testing of Fiber Optic Components |
|
TIA TIA-455-191- B |
FOTP-191 IEC-60793-1-45 Optical Fibres Part 1-45: Measurement Methods and Test Procedures Mode Field Diameter |
|
TIA TIA-455- 192 |
FOTP-192 H-Parameter Test Method for Polarization-Maintaining Optical Fiber |
|
TIA TIA-455- 193 |
FOTP-193 Polarization Crossstalk Method for Polarization-Maintaining Optical Fiber and Components |
|
TIA TIA-455- 199 |
FTOP-199 In-Line Polarization Crosstalk Measurement Method for Polarization-Maintaining Optical Fibers, Components, and Systems |
|
TIA TIA-455-20- B |
FOTP-20 IEC 60793-1-46 Optical Fibres Part 1-46: Measurement Methods and Test Procedures Monitoring of Changes in Optical Transmittance- ***CURRENTLY NOT AVAILABLE*** |
|
TIA TIA-455- 218 |
Measurement of Endface Geometry of Single Fiber Optical Connectors |
|
TIA TIA-455- 219 |
Multifiber Ferrule Endface Ferrule Hole Inside Diameter |
|
TIA TIA-455-21- A |
FOTP-21 Mating Durability of Fiber Optic Interconnecting Devices |
|
TIA TIA-455-220- A |
FOTP-220 Differential Mode Delay Measurement of Multimode Fiber in the Time Domain |
|
TIA TIA-455- 228 |
FOTP-228 Relative Group Delay and Chromatic Dispersion Measurement of Single-Mode Components and Devices by the Phase Shift Method |
|
TIA TIA-455- 229 |
FOTP-229 Optical Power Handling and Damage Threshold Characterization |
|
TIA TIA-455-22- B |
FOTP-22 Ambient Light Susceptibility of Fiber Optic Components |
|
TIA TIA-455- 235 |
FOTP-235 IEC 61280-2-8 Fibre Optic Communication Subsystem Test Procedures Digital Systems Part 2-8: Determination of Low BER Using Q-Factor Measurements |
|
TIA TIA-455-23- A |
FOTP-23 Air Leakage Testing of Fiber Optic Component Seals |
|
TIA TIA-455-26- A |
FOTP-26 Crush Resistance of Fiber Optic Cable Interconnecting Devices |
|
TIA TIA-455-31- C |
FOTP-31 Proof Testing Optical Fibers by Tension |
|
TIA TIA-455-33- B |
FOTP-33 Optical Fiber Cable Tensile Loading and Bending Test |
|
TIA TIA-455-36- A |
FOTP-36 Twist Test for Fiber Optic Connecting Devices |
|
TIA TIA-455-37- A |
FOTP-37 Low or High Temperature Bend Test for Fiber Optic Cable |
|
TIA TIA-455- 38 |
FOTP-38 Measurement of Fiber Strain in Cables under Tensile Load |
|
TIA TIA-455-39- B |
FOTP-39 Optical Fiber Cable Water Wicking Test |
|
TIA TIA-455-47- B |
FOTP-47 Output Far-Field Radiation Pattern Measurement |
|
TIA TIA-455-48- B |
FOTP-48 Measurement of Optical Fiber Cladding Diameter Using Laser- Based Instruments |
|
TIA TIA-455-56- B |
FOTP-56 Test Method for Evaluating Fungus Resistance of Optical Fiber and Cable |
|
TIA TIA-455-57- B |
FOTP-57 Preparation and Examination of Optical Fiber Endface for Testing Purposes |
|
TIA TIA-455-58- B |
FOTP-58 Core Diameter Measurement of Graded-Index Optical Fibers- ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455- 64 |
FOTP-64 Procedure for Measuring Radiation-Induced Attenuation in Optical Fibers and Optical Cables |
|
TIA TIA-455-67- A |
FOTP-67 IEC-60793-1-51 Optical Fibres Part 1-51: Measurement Methods and Test Procedures Dry Heat-THIS STANDARDS REPLACES TIA/EIA-455- 70 |
|
TIA TIA-455-6- B |
FOTP-6 Cable Retention Test Procedure for Fiber Optic Cable Interconnecting Devices |
|
TIA TIA-455- 7 |
FOTP-7 Numerical Aperature of Step-Index Multimode Optical Fibers by Output Far-Field Radiation Pattern Measurement |
|
TIA TIA-455- 82B |
FOTP 82-B Fluid Penetration Test for Fluid-Blocked Fiber Optic Cable- ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-455-84- B |
FOTP-84 Jacket Self-Adhesion (Blocking) Test for Optical Fiber Cable |
|
TIA TIA-455-85- A |
FOTP-85 Fiber Optic Cable Twist Test |
|
TIA TIA-455- 86 |
FOTP-86 Fiber Optic Cable Jacket Shrinkage |
|
TIA TIA-455-87- B |
FOTP-87 Fiber Optic Cable Knot Test |
|
TIA TIA-455-89- B |
FOTP-89 Optical Fiber Cable Jacket Elongation and Tensile Strength |
|
TIA TIA-455- 91 |
FOTP-91 Fiber Optic Cable Twist-Bend Test |
|
TIA TIA-455-95- A |
FOTP-95 Absolute Optical Power Test for Optical Fibers and Cables |
|
TIA TIA-4720000- A |
Generic Specification for Fiber Optic Cable |
|
TIA TIA- 472F000 |
Sectional Specification (Adopted ICEA S-110-717-2003) Standard for Optical Fiber Drop Cable |
|
TIA TIA-4920000- B |
Generic Specification for Optical Fibers |
|
TIA TIA-492A000- A |
Sectional Specification for Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA-492AA00- A |
Blank Detail Specification for Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA-492AAAA- A |
Detail Specification for 62.5-Micrometer Core Diameter/125-Micrometer Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA- 492AAAB |
Detail Specification for 50-Micrometer Core Diameter/125- Micrometer Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA-492AAAC- A |
Detail Specification for 850-nm Laser-Optimized, 50-um Core Diameter/125-um Cladding Diameter Class Ia Graded-Index Multimode Optical Fibers |
|
TIA TIA- 492C000 |
Sectional Specification for Class IVa Dispersion-Unshifed Single- Mode Optical Fibers |
|
TIA TIA- 492CA00 |
Blank Detail Specification for Class IVa Dispersion-Unshifted Single Mode Optical Fibers |
|
TIA TIA- 492CAAA |
Detail Specification for Class IVa Dispersion-Unshifted Single- Mode Optical Fibers |
|
TIA TIA- 492CAAB |
Detail Specification for Class IVa Dispersion-Unshifted Single- Mode Optical Fibers with Low Water Peak |
|
TIA TIA- 492E000 |
Sectional Specification for Class IVd Nonzero-Dispersion Single- Mode Optical Fibers for the 1550 nm Window |
|
TIA TIA- 492EA00 |
Blank Detail Specification for Class IVd Nonzero-Dispersion Single-Mode Optical Fiber for the 1550 nm Window |
|
TIA TIA- 5150000 |
Generic Specification for Optical Fiber and Cable Splices |
|
TIA TIA- 515B000 |
Sectional Specification for Splice Closures for Pressurized Aerial, Buried and Underground Fiber Optic Cables |
|
TIA TIA- 526 |
Standard Test Procedures for Fiber Optic Systems |
|
TIA TIA-526- 10 |
OFSTP 10 Measurement of Dispersion Power Penalty in Digital Single- Mode Systems-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-526- 11 |
OFSTP-11 Measurement of Single-Reflection Power Penalty for Fiber Optic Terminal Equipment |
|
TIA TIA-526-14- A |
OFSTP-14 Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant-ANSI APPROVAL WITHDRAWN AUGUST 2003 |
|
TIA TIA-526- 15 |
OFSTP-15 Jitter Tolerance Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526- 16 |
OFSTP-16 Jitter Transfer Function Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526- 17 |
OFSTP-17 Output Jitter Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526- 18 |
OFSTP-18 Systematic Jitter Generation Measurement-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526- 2 |
OFSTP-2 Effective Transmitter Output Power Coupled Into Single-Mode Fiber Optic Cable-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526- 27 |
OFSTP-27 Procedure for System-Level Temperature Cycle Endurance Test |
|
TIA TIA-526- 3 |
OFSTP-3 Fiber Optic Terminal Equipment Receiver Sensitivity and Maximum Receiver Input-ANSI APPROVAL WITHDRAWN FEBRUARY 2004 |
|
TIA TIA-526-4- A |
OFSTP-4 Optical Eye Pattern Measurement Procedure |
|
TIA TIA-526- 7 |
OFSTP-7 Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant |
|
TIA TIA- 5430000 |
Generic Specification Field Portable Electronic Instruments for Optical Fiber System |
|
TIA TIA- 559 |
Single-Mode Fiber Optic System Transmission Design |
|
TIA TIA-559- 1 |
Single-Mode Fiber Optic System Transmission Design-Addendum 1 to TIA-559 |
|
TIA TIA- 587 |
Fiber Optic Graphic Symbols |
|
TIA TIA-590- A |
Standard for Physical Location and Protection of Below Ground Fiber Optic Cable Plant-ANSI APPROVAL WITHDRAWN JUNE 2003 |
|
TIA TIA-598- C |
Optical Fiber Cable Color Coding |
|
TIA TIA-604- 1 |
FOCIS 1 Fiber Optic Connector Intermateability Standard |
|
TIA TIA-604-13- A |
FOCIS-13 Fiber Optic Connector Intermateability Standard, Type SFOC 1.25 |
|
TIA TIA-604- 15 |
FOCIS-15 Fiber Optic Connector Intermateability Standard Type MF |
|
TIA TIA-604-16- B |
FOCIS 16 Fiber Optic Connector Intermateability Standard Type LSH |
|
TIA TIA-604- 17 |
FOCIS 17 Fiber Optic Connector Intermateability Standard, Type MU |
|
TIA TIA-604-2- B |
FOCIS-2 Fiber Optic Connector Intermateability Standard, Type ST |
|
TIA TIA-604-3- B |
FOCIS-3 Fiber Optic Connector Intermateability Standard, Type SC and SC-APC |
|
TIA TIA-604-4- B |
FOCIS-4 Fiber Optic Connector Intermateability Standard, Type FC and FC-APC |
|
TIA TIA-604-5- C |
FOCIS-5 Fiber Optic Connector Intermateability Standard, Type MPO |
|
TIA TIA-604- 7A |
FOCIS-7 Fiber Optic Connector Intermateability Standard - Type SG |
|
TIA TIA- 6090000 |
Generic Specification for Optical Fiber Splices |
|
TIA TIA- 609A000 |
Sectional Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA- 609AA00 |
Blank Detail Specification for Conventional, Permanent, Optical Fiber Splices |
|
TIA TIA- 6200000 |
Generic Specification for Passive Optical Branching Devices |
|
TIA TIA- 620A000 |
Sectional Specification for Single-Mode Fiber Optic Branching Devices for Outside Plant Applications |
|
TIA TIA- 620AA00 |
Blank Detail Specification for Single-Mode Fiber Optic Branching Devices for Outside Plant Applications |
|
TIA TIA- 939 |
Procedures for Automatic Interworking Between T.30, V.18, V.8 and V.32/ Annex A Automode Modems and V.32 bis, V32,V.22 bis, V.21, V.23.212- Type |
|
TIA TSB120 |
Polarization Maintaining Fiber in Telecommunications: Applications and Challenges |
|
TIA TSB- 19 |
Optical Fiber Digital Transmission Systems Considerations for Users and Suppliers |
|
TIA TSB- 62 |
Informative Test Methods (ITMs) for Fiber-Optic Fibers, Cables, Opto- Electronic Sources and Detectors, Sensors, Connecting and Terminating Devices, and Other Fiber-Optic Components |
|
TIA TSB-62.22- A |
ITM-22 Continuous Wave Method for Measuring the Raman Gain Efficiency of Single-Mode Fibers |
|
TIA TSB-62- 1 |
ITM-1 Characteristics of Large Flaws in Optical Fibers by Dynamic Tensile Testing with Censoring |
|
TIA TSB62- 10 |
ITM-10 Procedure for Applying Loads Directly to the Fiber in Optical Connectors or Fiber/Ferrule Assemblies to Quantify Fiber Pushback |
|
TIA TSB62- 12 |
ITM-12 Microbend Sensitivity Test Methods |
|
TIA TSB62- 13 |
ITM-13 Measuring Dynamic Strength and Fatigue Parameters of Optical Fibers by Two-Point Bending |
|
TIA TSB62- 20 |
ITM-20 enhanced Bandwidth Performance over Laser-Based, Multimode Fiber Local Area Networks |
|
TIA TSB62- 23 |
ITM-23 Measurement of the Nonlinear Coefficient of Single-Mode Fibers |
|
TIA TSB62- 24 |
ITM-24 Fiber Break Source Analysis |
|
TIA TSB-62- 3 |
ITM-3 Mode Power Distribution and Mode Transfer Function Measurement |
|
TIA TSB62- 5 |
ITM-5 Characterization of Attenuation Uniformity of Optical Fiber |
|
TIA TSB62- 6 |
ITM-6 Characterization of Mode Field Diameter and Cutoff Wavelength of Single-Mode Optical Fiber by OTDR |
|
TIA TSB62- 7 |
ITM-7 Characterization of Fiber Strip Damage by Dynamic Tensile Testing |
|
TIA TSB63 |
Reference Guide for Fiber Optic Test Procedures-Replaces CB9- F |