IEC Microelectronics Collection

IEC 61010-1

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements-Second Edition; Corrigendum 1:05/2002; Corrigendum 2:04/2003

IEC 60950-21 CORR 1

Information technology equipment – Safety – Part 21: Remote power feeding CORRIGENDUM 1-First Edition

IEC TR 62102

Electrical safety – Classification of interfaces for equipment to be connected to information and communications technology networks-Edition 2.0

IEC 61010-2-101

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use Part 2-101: Particular Requirements for in Vitro Diagnostic (IVD) Medical Equipment-First Edition

IEC 61010-2-032

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use – Part 2-032: Particular Requirements for Hand-Held and Hand-Manipulated Current Sensors for Electrical Test and Measurement-Edition 2

IEC 60950-23

Information technology equipment Safety Part 23: Large data storage equipment-First Edition

IEC 60623

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Vented Nickel-Cadmium Prismatic Rechargeable Single Cells-Fourth Edition

IEC 61010-2-051

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-051: Particular requirements for laboratory equipment for mixing and stirring-Edition 2

IEC 61010-2-081

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes-First Edition; Amendment 1: 6/2003

IEC 60068-2-21

Environmental testing – Part 2-21: Tests – Test U: Robustness of terminations and integral mounting devices-Edition 6.0

IEC 60950-22

Information technology equipment Safety Part 22: Equipment to be installed outdoors-Edition 1

IEC 60896-11

Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests-First Edition

IEC 62052-11

Electricity metering equipment (AC) General requirements, tests and test conditions Part 11: Metering equipment-First Edition; Replaces IEC 61036

IEC 61010-031

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 031: Safety Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test-First Edition; Replaces IEC 61010-2-031

IEC 62053-11

Electricity metering equipment (a.c.) Particular requirements Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)-First Edition

IEC 62053-22

Electricity metering equipment (a.c.) Particular requirements Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)-First Edition

IEC 60896-21

Stationary lead-acid batteries Part 21: Valve regulated types Methods of test-First Edition; Replaces IEC 60896-2:1995

IEC 62053-21

Electricity metering equipment (a.c.) Particular requirements Part 21: Static meters for active energy (classes 1 and 2)-First Edition

IEC 60603-2

Connectors for Frequencies Below 3 MHz for Use with Printed Boards - Part 2: Detail Specification for Two-Part Connectors with Assessed Quality, for Printed Boards, for Basic Grid of 2,54 mm (0,1 in) with Common Mounting Features-Third Edition; IECQ QC 010000XX0002; Amendment 1, 08-2000

IEC 61010-2-020

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-020: Particular requirements for laboratory centrifuges-Edition 2.0

IEC 61010-2-040

Safety requirements for electrical equipment for measurement, control and laboratory use – Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials-Edition 1; Supersedes IEC 61010-2-041, 61010-2-042, 61010-2-043, and 61010-2-045

IEC 60297-1

Dimensions of Mechanical Structures of the 482.6 mm (19 in) Series Part 1: Panels and Racks-Third Edition

IEC 61965

Mechanical Safety of Cathode Ray Tubes-Second Edition

IEC 60050-482

International Electrotechnical Vocabulary Part 482: Primary and secondary cells and batteries-First Edition

IEC 61960

Secondary cells and batteries containing alkaline or other non-acid electrolytes Secondary lithium cells and batteries for portable applications-First Edition

IEC 60747-1

Semiconductor devices – Part 1: General-Edition 2

IEC 61951-1

Secondary cells and batteries containing alkaline or other non-acid electrolytes – Portable sealed rechargeable single cells – Part 1: Nickel-cadmium-Edition 2.1; Consolidated Reprint

IEC 60297-2

Dimensions of Mechanical Structures of the 482.6 mm (19 Inch) Series Part 2: Cabinets and Pitches of Rack Structures-First Edition

IEC 61821

Electrical Installations for Lighting and Beaconing of Aerodromes - Maintenance of Aeronautical Ground Lighting Constant Current Series Circuits-First Edition

IEC 62282-2

Fuel cell technologies – Part 2: Fuel cell modules-Edition 1.1 Consolidated Reprint

IEC 60095-1

Lead-acid starter batteries – Part 1: General requirements and methods of test-Edition 7.0

IEC 62053-23

Electricity metering equipment (a.c.) Particular requirements Part 23: Static meters for reactive energy (classes 2 and 3)-First Edition

IEC 60747-5-1

Discrete Semiconductor Devices and Integrated Circuits - Part 5-1: Optoelectronic Devices - General-Edition 1.2; Edition 1:1997 Consolidated with Amendments 1:2001 and 2:2002

IEC TR 62380

Reliability data handbook Universal model for reliability prediction of electronics components, PCBs and equipment-First Edition

IEC 60050-471

International Electrotechnical Vocabulary Part 471: Insulators-Edition 2.0

IEC 60297-3-101

Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-101: Subracks and associated plug-in units-First Edition; Replaces IEC 60297-3, IEC 60297-4, IEC 60297-5-100, IEC 60297-5-102, IEC 60297-5-103, IEC 60297-5-107

IEC 61959

Secondary cells and batteries containing alkaline or other non-acid electrolytes Mechanical tests for sealed portable secondary cells and batteries-First Edition

IEC 60194

Printed board design, manufacture and assembly – Terms and definitions-Fifth Edition

IEC 62326-1

Printed Boards - Part 1: Generic Secification-Second Edition; IECQ QC 230000; Replaces IEC 60747-5

IEC 60512-2-1

Connectors for Electronic Equipment; Tests and Measurements - Part 2-1: Electrical Continuity and Contact Resistance Tests - Test 2a: Contact Resistance - Millivolt Level Method-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-3, 60512-2-6, 60512-3-1, 60512-4-2, and 60512-4-3 Replaces IEC 60512-2

IEC 60068-2-58

Environmental testing – Part 2-58: Tests – Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)-Third Edition

IEC 61010-2-061

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization-Second Edition

IEC 62133

Secondary cells and batteries containing alkaline or other non-acid electrolytes Safety requirements for portable sealed secondary cells, and for batteries made from them, for use in portable applications-First Edition

IEC TR 61010-3-1

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-1: Conformity Verification Report for IEC 61010-1 General Requirements-Second Edition

IEC TR 61010-3-101

Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 3-101: Conformity verification report for IEC 61010-2-101:2002 – Particular requirements for in vitro diagnostic (IVD) medical equipment-First Edition

IEC TS 62143

Electrical Installations for Lighting and Beaconing of Aerodromes - Aeronautical Ground Lighting Systems - Guidelines for the Development of a Safety Lifecycle Methodology-First Edition

IEC TS 62282-1

Fuel cell technologies Part 1: Terminology-Edition 1

IEC 60352-5

Solderless Connections - Part 5: Press-In Connections - General Requirements, Test Methods and Practical Guidance-Edition 2.1; Edition 2: Consolidated with Amendment 1:2003

IEC 60622

Secondary cells and batteries containing alkaline or other non-acid electrolytes Sealed nickel-cadmium prismatic rechargeable single cells-Third Edition

IEC 60749-26

Semiconductor devices – Mechanical and climatic test methods – Part 26: Electrostatic discharge (ESD) sensitivity testing – Human body model (HBM)-Edition 2.0

IEC TR 61010-3

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3: Protocol for the Preparation of Conformity Verification Reports for the IEC 61010 Series-Second Edition

IEC TR 61010-3-032

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-032: Conformity Verification Report for IEC 61010-2-032: 1994, Particular Requirements for Hand-Held Current Clamps for Electrical Measurement and Test-First Edition

IEC 60068-2-54

Environmental testing – Part 2-54: Tests – Test Ta: Solderability testing of electronic components by the wetting balance method-Edition 2

IEC 60122-1

Quartz Crystal Units of Assessed Quality - Part 1: Generic Specification-Third Edition; Replaces IEC 61178-1, 1983 and IEC 60302, 1969

IEC 61429

Marking of Secondary Cells and Batteries with the International Recycling Symbol ISO 7000-1135-First Edition

IEC 61951-2

Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Portable Sealed Rechargeable Single Cells - Part 2 Nickel-Metal Hydride-Second Edition; Replaces IEC 61436: 1998 and IEC 61808: 1999

IEC TS 61827

Electrical installations for lighting and beaconing of aerodromes Characteristics of inset and elevated luminaires used on aerodromes and heliports-First Edition

IEC 60512-8

Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods Part 8: Connector Tests (Mechanical) and Mechanical Tests on Contacts and Terminations-Third Edition

IEC 60747-5-3

Discrete Semiconductor Devices and Integrated Circuits - Part 5-3: Optoelectronic Devices - Measuring Methods-First Edition; Patially Replaces IEC 747-5: 1992; Amendment 1: 03/2002

IEC 60760

Flat, Quick-Connect Terminations Second Edition; (Amendment 1-1993)-Bilingual; Amendment 1: 08/1993

IEC 60134

Rating Systems for Electronic Tubes and Valves and Analogous Semiconductor Devices-Edition 1

IEC 60917-1

Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices - Part 1: Generic Standard-First Edition; Amendment 1 05-2000

IEC 60469-1

Pulse techniques and apparatus Part 1: Pulse terms and definitions-Second Edition

IEC 60068-2-42

Environmental testing Part 2-42: Tests Test Kc: Sulphur dioxide test for contacts and connections-Third Edition

IEC 60130-2

Connectors for Frequencies Below 3 MHz Part 2: Connectors for Radio Receivers and Associated Sound Equipment-Second Edition; Amendment 1: 5/1969

IEC 60130-9

Connectors for Frequencies Below 3 MHz Part 9: Circular Connectors for Radio and Associated Sound Equipment-Third Edition

IEC 60297-3-102

Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-102: Injector/extractor handle-First Edition; Replaces IEC 60297-4, its amendment 1 (1999) and IEC 60297-5-101.

IEC 60297-3-103

Mechanical structures for electronic equipment Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-103: Keying and alignment pin-First Edition; Replaces IEC 60297-5-104 and 60297-5-105

IEC 60603-7

Connectors for frequencies below 3 MHz for use with printed boards Part 7: Detail specification for connectors, 8-way, including fixed and free connectors with common mating features, with assessed quality-Second Edition

IEC 61076-4-101

Connectors for Electronic Equipment - Part 4-101: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connector Modules, Having a Basic Grid of 2,0mm for Printed Boards and Backplanes in Accordance with IEC 60917-Second Edition; IECQ QC 480301XX0002; Corrigendum 1 November 2003

IEC TR 61010-3-043

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-043: Conformity Verification Report for IEC 61010-2-043:1997 - Particular Requirements for Dry Heat Sterilizers Using Either Hot Air or Hot Inert Gas for Treatment of Medical Materials and for Laboratory Processes-First Edition

IEC TS 61438

Possible safety and health hazards in the use of alkaline secondary cells and batteries – Guide to equipment manufacturers and users-First Edition

IEC 60095-4

Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for Heavy Trucks-First Edition; Amendment 1:02/1996

IEC 60512-1

Connectors for Electronic Equipment - Tests and Measurements - Part 1: General-Fourth Edition

IEC 61822

Electrical Installations for Lighting and Beaconing of Aerodromes - Constant Current Regulator-First Edition

IEC TR 61010-3-031

Safety requirements for electrical equipment for easurement, control, and laboratory use – Part 3-031: Conformity verification report for IEC 61010-031:2002 – Safety requirements for hand-held probe assemblies for electrical test and measurement-First Edition

IEC 60068-2-43

Environmental testing Part 2-43: Tests Test Kd: Hydrogen sulphide test for contacts and connections-Second Edition

IEC 60747-2

Semiconductor Devices - Discrete Devices and Integrated Circuits Part 2: Rectifier Diodes-Second Edition

IEC 61248-1

Transformers and inductors for use in electronic and telecommunication equipment - Part 1: Generic specification-First Edition; IECQ QC 260000

IEC 61249-2-1

Materials for printed boards and other interconnecting structures Part 2-1: Reinforced base materials, clad and unclad Phenolic cellulose paper reinforced laminated sheets, economic grade, copper clad-First Edition; Replaces IEC 60249 Series

IEC 62194

Method of evaluating the thermal performance of enclosures-First Edition

IEC 60068-2-77

Environmental Testing - Part 2-77: Tests - Test 77: Body Strength and Impact Shock-First Edition

IEC 60095-2

Lead-Acid Starter Batteries Part 2: Dimensions of Batteries and Dimensions and Marking of Terminals-Third Edition; Amendment 1:10/1991; Amendment 2:05/1993

IEC 60512-11-9

Connectors for Electronic Equipment - Tests and Measurements - Part 11-9: Climatic Tests - Test 11i: Dry Heat-First Edition; This Standard Along with IEC 60512-11-5, 60512-11-6, 60512-11-10, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6

IEC 60747-9

Semiconductor Devices - Discrete Devices - Part 9: Insulated-Gate Bipolar Transistors (IGBTs)-Edition 1.1; Edition 1: 1998 Consolidated with Amendment 1: 2001

IEC 60796-1

Microprocessor system bus - 8-Bit and 16-Bit data (MULTIBUS I) Part 1: Functional description with electrical and timing specifications-First Edition

IEC 60917-2-2

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units-First Edition

IEC 61191-1

Printed Board Assemblies - Part 1: Generic Specification - Requirements for Soldered Electrical and Electronic Assemblies Using Surface Mount and Related Assembly Technologies-First Edition

IEC 61427

Secondary cells and batteries for photovoltaic energy systems (PVES) – General requirements and methods of test-Edition 2

IEC 61691-4

Behavioural Languages - Part 4: Verilog hardware description language-First Edition; IEEE 1364

IEC 62007-2

Semiconductor Optoelectronic Devices for Fibre Optic System Applications - Part 2: Measuring Methods-Edition 1.1; Edition 1: 1997 Consolidated with Amendment 1: 1998

IEC TR 61010-3-010

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-010: Conformity Verification Report for IEC 61010-2-010, Particular Requirements for Laboratory Equipment for the Heating of Materials-First Edition

IEC TR 61010-3-045

Safety requirements for electrical equipment for measurement, control, and laboratory use – Conformity verification report for IEC 61010-2-045:2000 – Particular requirements for washer disinfectors used in medical, pharmaceutical, veterinary and laboratory fields-First Edition

IEC 60067

Dimensions of Electronic Tubes and Valves-Second Edition; Supplement A-1967; Supplement B-1969; Supplement C-1970; Supplement D-1977; Supplement E-1986

IEC 60512-2-2

Connectors for electronic equipment Tests and measurements Part 2-2: Electrical continuity and contact resistance tests Test 2b: Contact resistance Specified test current method-First Edition

IEC 60749-15

Semiconductor devices Mechanical and climatic test methods Part 15: Resistance to soldering temperature for through-hole mounted devices-First Edition; Replaces IEC/PAS 62174: 2000; Together with IEC 60749-14:2003, IEC 60749-3:2002 And IEC 60749-31:2002 Replaces IEC 60749:2002

IEC 60749-3 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 3: External visual examination CORRIGENDUM 1-First Edition

IEC 60862-1

Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification-Second Edition; IECQ QC 166000:2003

IEC 60917-2-1

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1: Detail specification - Dimensions for cabinets and racks-First Edition

IEC 61115

Expression of Performance of Sample Handling Systems for Process Analyzers-First Edition

IEC 62259

Secondary cells and batteries containing alkaline or other non-acid electrolytes Nickel-cadmium prismatic secondary single cells with partial gas recombination-First Edition

IEC 62326-4

Printed Boards - Part 4: Rigid Multilayer Printed Boards with Interlayer Connections - Sectional Specification-First Edition; IECQ QC 230500

IEC TR 61010-3-041

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-041: Conformity Verification Report for IEC 61010-2-041: 1995, Particular Requirements for Autoclaves Using Steam for the Treatment of Medical Materials, and for Laboratory Processes-First Edition; Also Available in Diskette

IEC TR 61431

Guide for the Use of Monitor Systems for Lead-Acid Traction Batteries-Edition 1

IEC TS 62398

Ferrite cores Technology approval schedule (TAS)-First Edition; QC 210018

IEC 60097

Grid System for Printed Circuits-Edition 4

IEC 60512-3-1

Connectors for Electronic Equipment; Tests and Measurements - Part 3-1: Insulation Tests - Test 3a: Insulation Resistance-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-4-2, and 60512-4-3 Replaces IEC 60512-2

IEC 60862-2

Surface acoustic wave (SAW) filters of assessed quality Part 2: Guidance on use-Second Edition

IEC 61076-2-101 AMD 1

Connectors for electronic equipment – Part 2-101: Circular connectors – Detail specification for circular connectors M8 with screw- or snap-locking, M12 with screw-locking for low voltage applications Amendment 1-First Edition

IEC 61189-2

Test methods for electrical materials, printed boards and other interconnection structures and assemblies – Part 2: Test methods for materials for interconnection structures-Edition 2

IEC TR 61010-3-020

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-020: Conformity Verification Report for IEC 61010-2-020: 1992 Particular Requirements for Laboratory Centrifuges-First Edition

IEC TS 61586

Estimation of the Reliability of Electrical Connectors-First Edition

IEC 60130-4A

First supplement to Publication 60130-4 (1966) Connectors for frequencies below 3 MHz Part 4: Circular multipole connectors with threaded coupling-First Edition; Supplement to IEC 60130-4

IEC 60254-1

Lead-acid traction batteries – Part 1: General requirements and methods of test-Edition 4

IEC 60512-11-7

Connectors for electronic equipment Tests and measurements Part 11-7: Climatic tests Test 11g: Flowing mixed gas corrosion test-Second Edition

IEC 60512-12-6

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 12: Soldering tests - Section 6: Test 12f: Sealing against flux and cleaning solvents in machine soldering-First Edition

IEC 60512-2-6

Connectors for Electronic Equipment; Tests and Measurements - Part 2-6: Electrical Continuity and Contact Resistance Tests - Test 2f: Housing (Shell) Electrical Continuity-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-3-1, 60512-4-2, and 60512-4-3 Replaces IEC 60512-2

IEC 60512-4-3

Connectors for Electronic Equipment; Tests and Measurements - Part 4-3: Voltage Stress Tests - Test 4c: Voltage Proof of Pre-Insulated Crimp Barrels-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, and 60512-4-2 Replaces IEC 60512-2

IEC 60603-7-4

Connectors for electronic equipment Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz-Edition 1

IEC 60747-16-1

Semiconductor devices – Part 16-1: Microwave integrated circuits – Amplifiers-Edition 1.1; Consolidated Reprint

IEC 60749-11 CORR 2

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 11: Rapid Change of Temperature - Two-Fluid-Bath Method CORRIGENDUM 2-First Edition

IEC 60749-25

Semiconductor devices Mechanical and climatic test methods Part 25: Temperature cycling-First Edition

IEC 60749-7 CORR 1

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 7: Internal Moisture Content Measurement and the Analysis of Other Residual Gases CORRIGENDUM 1-First Edition

IEC 60807-1

Rectangular Connectors for Frequencies Below 3 MHz Part 1: Generic Specification - General Requirements and Guide for the Preparation of Detail Specifications for Connectors with Assessed Quality-Second Edition; Same As IECQ QC 030000

IEC 60917-2

Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice-First Edition

IEC 61248-4

Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 4: Sectional Specification for Power Transformers for Switched Mode Power Supplies (SMPS) on the Basis of the Capability Approval Procedure-First Edition; IECQ QC 260300

IEC 62044-3

Cores Made of Soft Magnetic Materials - Measuring Methods - Part 3: Magnetic Properties at High Excitation Level-First Edition

IEC TR 61010-3-042

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-042: Conformity Verification Report for IEC 61010-2-042: 1997, Particular Requirements for Autoclaves and Sterilizers Using Toxic Gas for the Treatment of Medical Materials, and for Laboratory Processes-First Edition; Also Available in Diskette

IEC TR 61010-3-081

Safety requirements for electrical equipment for Part 3-081: Conformity verification report for IEC 61010-2-081:2001 – Particular requirements for automatic and semiautomatic laboratory equipment for analysis and other purposes-First Edition

IEC TR 61056-3

Portable Lead-Acid Cells and Batteries (Valve-Regulated Types) Part 3: Safety Recommendations for Use in Electric Appliances-Edition 1

IEC TR 62188

Secondary cells and batteries containing alkaline or other non-acid electrolytes Design and manufacturing recommendations for portable batteries made from sealed secondary cells-First Edition

IEC TR 62248

Approaches to conformance and certification testing for design automation standards-First Edition

IEC 60130-4

Connectors for Frequencies Below 3 MHz Part 4: Circular Multipole Connectors with Threaded Coupling-First Edition

IEC 60191-2

Mechanical Standardization of Semiconductor Devices - Part 2: Dimensions-Edition 1.0; Incorporates Supplements A thru Z; Corr:1/2000; Amd 1:03/2001; Amd 2:06/2001; Amd 3:08/2001; Amd 4:11/2001; Amd 5:02/2002; Amd 6:04/2002; Amd 7:05/2002; Amd 8:6/2003; Amd 9:11/2003; Amd 10:3/2004; Amd 11:11/2004; Amd 12:3/2006; Amendment 13:7/2006; Amendment 14:7/2006; Amendment 15:7/2006

IEC 60512-11-2

Connectors for Electronic Equipment - Tests and Measurements - Part 11-2: Climatic Tests - Test 11b:Combined/Sequential Cold, Low Air Pressure and Damp Heat-First Edition

IEC 60512-11-6

Connectors for Electronic Equipment - Tests and Measurements - Part 11-6: Climatic Tests - Test 11f: Corrosion, Salt Mist-First Edition; This Standard Along with IEC 60512-11-5, 60512-11-9, 60512-11-10, 60512-11-12 and 60512-11-13 Replaces IEC 60512-6

IEC 60512-1-2

Connectors for Electronic Equipment - Tests and Measurements - Part 1-2: General Examination - Test 1b: Examination of Dimension and Mass-First Edition; This Standard Along with IEC 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, 60512-4-2, 60512-4-3 Replaces IEC 60512-2

IEC 60512-12-7

Connectors for Electronic Equipment - Tests and Measurements - Part 12-7: Soldering Tests - Test 12g: Solderability, Wetting Balance Method-First Edition

IEC 60512-4-1

Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof-First Edition

IEC 60512-5

Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods Part 5: Impact Tests (Free Components), Static Load Tests (Fixed Components), Endurance Tests and Overload Tests-Second Edition

IEC 60512-6-3

Connectors for Electronic Equipment - Tests and Measurements - Part 6-3: Dynamic Stress Tests - Test 6c: Shock-First Edition; Replaces IEC 60512-4

IEC 60512-6-4

Connectors for Electronic Equipment - Tests and Measurments - Part 6-4: Dynamic Stress Tests - Test 6d: Vibration (Sinusoidal)-First Edition

IEC 60747-15

Discrete semiconductor devices Part 15: Isolated power semiconductor devices-First edition

IEC 60747-6

Semiconductor Devices - Part 6: Thyristors-Second Edition

IEC 60748-2-6

Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Six - Blank Detail Specification for Microprocessor Integrated Circuits-Edition 1; IECQ QC 790110

IEC 60749-1 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 1: General CORRIGENDUM 1-First Edition

IEC 60852-1

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Part 1: Transformers and inductors using YEI-1 laminations-First Edition

IEC 61248-3

Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 3: Sectional Specification for Power Transformers on the Basis of the Capability Approval Procedure First Edition; (IECQ QC 260200)-First Edition; IECQ QC 260200

IEC 62276

Single crystal wafers for surface acoustic wave (SAW) device applications Specifications and measuring methods-Edition 1.0

IEC PAS 62050

Board level drop test method of components for handheld electronic products-First Edition

IEC 60100

Methods for the Measurement of Direct Interelectrode Capacitances of Electronic Tubes and Valves-Edition 2; Amendment 1: 11/1969

IEC 60130-5

Connectors for Frequencies Below 3 MHz (Mc/s) Part 5: Rectangular Multipole Connectors with Blade Contacts-First Edition

IEC 60130-8

Connectors for Frequencies Below 3 MHz Part 8: Concentric Connectors for Audio Circuits in Radio Receivers-Second Edition

IEC 60133

Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts-Edition 4

IEC 60352-4

Solderless Connections - Part 4: Solderless Non-Accessible Insulation Displacement Connections - General Requirements, Test Methods and Practical Guidance-First Edition; Amendment 1: 07 2000

IEC 60469-2

Pulse techniques and apparatus Part 2: Pulse measurement and analysis, general considerations-Second Edition

IEC 60512-1-100

Connectors for electronic equipment – Tests and measurements – Part 1-100: General – Applicable publications-Edition 2.0

IEC 60512-16-20

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 16: Mechanical tests on contacts and terminations - Section 20: Test 16t: Mechanical strength (wired termination of solderless connections)-First Edition

IEC 60512-19-3

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 19: Chemical Resistance Test - Section 3: Test 19c - Fluid Resistance-First Edition

IEC 60512-20-2

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 20-2: Test 20b - Flammability Tests - Fireproofness-First Edition

IEC 60512-2-3

Connectors for Electronic Equipment; Tests and Measurements - Part 2-3: Electrical Continuity and Contact Resistance Tests - Test 2c: Contact Resistance Variation-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-6, 60512-3-1, 60512-4-2, and 60512-4-3 Replaces IEC 60512-2

IEC 60512-6-5

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 6: Dynamic Stress Tests - Section 5: Test 6e: Random Vibration-First Edition

IEC 60528

Expression of Performance of Air Quality Infra-Red Analyzers-First Edition

IEC 60740-1

Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics-First Edition; Replaces IEC 60740

IEC 60748-2-2

Semiconductor Devices Integrated Circuits Part 2: Digital Integrated Circuits Section Two - Family Specification for HCMOS Digital Integrated Circuits, Series 54/74 HC, 54/74 HCT, 54/74 HCU-First Edition; Amendment 1: 6/1994

IEC 60749-21

Semiconductor devices Mechanical and climatic test methods Part 21: Solderability-Edition 1

IEC 60862-3

Surface acoustic wave (SAW) filters of assessed quality Part 3: Standard outlines-Second Edition

IEC 60952-1

Aircraft Batteries Part 1: General Test Requirements and Performance Levels-Second Edition

IEC 60952-2

Aircraft Batteries Part 2: Design and Construction Requirements-Second Edition

IEC 60993

Electrolyte for Vented Nickel-Cadmium Cells-First Edition

IEC 61056-1

General purpose lead-acid batteries (valve-regulated types) û Part 1: General requirements, functional characteristics û Methods of test-Second Edition

IEC 61076-2-102

Connectors for Electronic Equipment - Part 2-102: Circular Connectors with Assessed Quality - Detail Specification for Plugs and Jacks for External Low Voltage Power Supply-First Edition; IECQ QC 480101

IEC 61076-4-115

Connectors for electronic equipment Part 4-115: Printed board connectors Backplane connector for InfiniBand equipment-First Edition

IEC 61182-1

Printed Boards - Electronic Data Description and Transfer - Part 1: Printed Board Description in Digital Form-First Edition

IEC 61182-7

Printed Boards - Electronic Data Description and Transfer - Part 7: Bare Board Electric Test Information in Digital Form-Edition 1; Corrigendum 1: October 2002

IEC 61188-1-2

Printed Boards and Printed Board Assemblies - Design and Use - Part 1-2: Generic Requirements - Controlled Impedance-First Edition

IEC 61969-1

Mechanical Structures for Electronic Equipment - Outdoor Enclosures - Part 1: Design Guidelines-First Edition

IEC 62044-2

Cores made of soft magnetic materials Measuring methods Part 2: Magnetic properties at low excitation level-Edition 1

IEC PAS 60603-7-3

Connectors for electronic equipment Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz-First Edition

IEC TR 61010-3-051

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-051: Conformity Verification Report for IEC 61010-2-051, Particular Requirements for Laboratory Equipment for Mixing and Stirring-First Edition

IEC TR 61010-3-061

Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 3-061: Conformity Verification Report for IEC 61010-2-061, Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization-First Edition

IEC TR 61926-1-1

Design Automation - Part 1-1: Harmonization of ATLAS Test Languages-First Edition

IEC TR 62060

Secondary Cells and Batteries - Monitoring of Lead Acid Stationary Batteries - User Guide-First Edition

IEC 60352-2

Solderless Connections - Part 2: Crimped Connections - General Requirements, Test Methods and Practical Guidance-second Edition

IEC 60352-3

Solderless Connections Part 3: Solderless Accessible Insulation Displacement Connections - General Requirements, Test Methods and Practical Guidance-First Edition; Corrigendum: 11/1995

IEC 60512-1-1

Connectors for Electronic Equipment - Tests and Measurements - Part 1-1: General Examination - Test 1a: Visual Examination-First Edition

IEC 60512-11-1

Electromechanical components for electronic equipment - Basic testing procedures and measuring methods - Part 11: Climatic tests - Section 1: Test 11a - Climatic sequence-First Edition

IEC 60512-11-3

Connectors for Electronic Equipment - Tests and Measurements - Part 11-3: Climatic Tests - Test 11c: Damp Heat, Steady State-First Edition

IEC 60512-1-3

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 1: General Examination - Section 3: Test 1c - Electrical Engagement Length-First Edition

IEC 60512-13-1

Connectors for electronic equipment – Tests and measurements – Part 13-1: Mechanical operation tests – Test 13a: Engaging and separating forces-Second Edition

IEC 60512-23-3

Electromechanical Components for Electronic Equipment - Basic Testing Procedures and Measuring Methods - Part 23-3: Test 23c: Shielding Effectiveness of Connectors and Accessories-First Edition; Corrigendum 1: 4/2003

IEC 60512-7

Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods Part 7: Mechanical Operating Tests and Sealing Tests-Edition 3.0;: 2006

IEC 60512-9

Electromechanical Components for Electronic Equipment; Basic Testing Procedures and Measuring Methods Part 9: Miscellaneous Tests-Second Edition

IEC 60689

Measurements and Test Methods for 32 kHz Quartz Crystal Units for Wrist Watches and Standard Values-Edition 1

IEC 60746-1

Expression of Performance of Electrochemical Analyzers Part 1: General-Second Edition

IEC 60746-5

Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential-First Edition

IEC 60747-2-1

Semiconductor devices - Discrete devices - Part 2: Rectifier diodes - Section One: Blank detail specification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, up to 100 A-First Edition;

IEC 60747-6-3

Semiconductor Devices Discrete Devices Part 6: Thyristors Section Three - Blank Detail Specification for Reverse Blocking Triode Thyristors, Ambient and Case-Rated, for Currents Greater Than 100 A-First Edition

IEC 60748-3

Semiconductor Devices Integrated Circuits Part 3: Analogue Integrated Circuits-Edition 1; Amendment 1: 1991; Amendment 2: 1994; Corrigendum: 06/1996

IEC 60748-5

Semiconductor Devices - Integrated Circuits - Part 5: Semicustom Integrated Circuits-First Edition

IEC 60749-16

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 16: Particle Impact Noise Detection (PIND)-First Edition; Replaces IEC/PAS 62171

IEC 60749-2 CORR 1

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 2: Low Air Pressure CORRIGENDUM 1-First Edition

IEC 60749-27

Semiconductor devices – Mechanical and climatic test methods – Part 27: Electrostatic discharge (ESD) sensitivity testing – Machine model (MM)-Edition 2.0

IEC 60824

Terminology related to microprocessors-First Edition

IEC 61188-5-1

Printed Boards and Printed Board Assemblies - Design and Use - Part 5-1: Attachment (Land/Joint) Considerations - Generic Requirements-First Edition; Replaces IEC 60321 Ed. 1.0: 1970 and IEC 60321-2 Ed. 1.0: 1987

IEC 61248-5

Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 5: Sectional Specification for Pulse Transformers on the Basis of the Capability Approval Procedure-First Edition; IECQ QC 260400

IEC 61434

Secondary cells and batteries containing alkaline or other non-acid electrolytes Guide to the designation of current in alkaline secondary cell and battery standards

IEC 62014-1

Electronic Design Automation Libraries - Part 1: Input/Output Buffer Information Specifications (IBIS Version 3.2)-First Edition

IEC 62044-1

Cores Made of Soft Magnetic Materials - Measuring Methods - Part 1: Generic Specification-First Edition

IEC TS 62367

Safety aspects for xDSL signals on circuits connected to telecommunication networks (DSL: Digital Subscriber Line)-First Edition

IEC 60130-12

Connectors for Frequencies Below 3 MHz Part 12: Link and Test Connectors-Second Edition

IEC 60130-16

Connectors for Frequencies Below 3 MHz Part 16: Printed Circuit Board Mounted Connectors with Two Rows of Staggered Contacts and Terminations with Spacing of 2.54 mm (0.1 in)-First Edition

IEC 60191-1

Mechanical standardization of semiconductor devices – Part 1: General rules for the preparation of outline drawings of discrete devices-Edition 2

IEC 60254-2

Lead-Acid Traction Batteries - Part 2: Dimensions of Cells and Terminals and Marking of Polarity on Cells-Edition 3.1

IEC 60401-3

Terms and nomenclature for cores made of magnetically soft ferrites Part 3: Guidelines on the format of data appearing in manufacturers´ catalogues of transformer and inductor cores-First Edition; Replaces IEC 60401

IEC 60483

Guide to Dynamic Measurements of Piezoelectric Ceramics with High Electromechanical Coupling-First Edition

IEC 60512-10-4

Connectors for electronic equipment Tests and measurements Part 10-4: Impact tests (free components), static load tests (fixed components), endurance tests and overload tests Test 10d: Electrical overload (connectors)-Second Edition

IEC 60512-11-14

Connectors for electronic equipment Tests and measurements Part 11-14: Climatic tests Test 11p: Flowing single gas corrosion test-Second Edition

IEC 60512-23-7

Connectors for electronic equipment Tests and measurements Part 23-7: Screening and filtering tests Test 23g: Effective transfer impedance of connectors-First Edition

IEC 60512-2-5

Connectors for electronic equipment Tests and measurements Part 2-5: Electrical continuity and contact resistance tests Test 2e: Contact disturbance-First Edition

IEC 60512-25-1

Connectors for Electronic Equipment - Tests and Measurements - Part 25-1: Test 25a - Crosstalk Ratio-First Edition

IEC 60512-4-2

Connectors for Electronic Equipment; Tests and Measurements - Part 4-2: Voltage Stress Tests - Test 4b: Partial Discharge-First Edition; This Standard Along with IEC 60512-1-2, 60512-2-1, 60512-2-3, 60512-2-6, 60512-3-1, and 60512-4-3 Replaces IEC 60512-2

IEC 60512-5-1

Connectors for Electronic Equipment; Tests and Measurements - Part 5-1: Current-Carrying Capacity Tests - Test 5a: Temperature Rise-First Edition; This Standard Along with IEC 60512-5-2 Replaces IEC 60512-3

IEC 60512-6-1

Connectors for Electronic Equipment - Tests and Measurements - Part 6-1: Dynamic Stress Tests - Test 6a: Acceleration, Steady State-First Edition; This Standard Along with 60512-6-2 Replaces IEC 60512-4

IEC 60603-1

Connectors for Frequencies Below 3 MHz for Use with Printed Boards Part 1: Generic Specification - General Requirements and Guide for the Preparation of Detail Specifications, with Assessed Quality-Second Edition; Amendment 1: 06-1992;

IEC 60603-7-1

Connectors for Electronic Equipment - Part 7-1: Detail Specification for 8-Way, Shielded Free and Fixed Connectors with Common Mating Features, with Assessed Quality-First Edition; QC 010000 XX0004

IEC 60635

Toroidal Strip-Wound Cores Made of Magnetically Soft Material-First Edition; Amendment 1-1997

IEC 60746-2 CORR 2

Expression of performance of electrochemical analyzers – Part 2: pH value CORRIGENDUM 2-Second Edition

IEC 60747-10

Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits-Second Edition; Amendment 1: 1995; Amendment 2: 1996; Amendment 3: 08/1996

IEC 60747-11

Semiconductor devices. Discrete devices. Part 11: Sectional specification for discrete devices-First Edition; Amendment 1: 11/1991; Amendment 2: 05/1996;

IEC 60747-16-10

Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits-First Edition

IEC 60747-16-2

Semiconductor Devices - Part 16-2: Microwave Integrated Circuits - Frequency Prescalers-First Edition

IEC 60747-16-3

Semiconductor Devices - Part 16-3: Microwave Integrated Circuits - Frequency Converters-First Edition

IEC 60747-16-4

Semiconductor devices Part 16-4: Microwave integrated circuits Switches-First Edition

IEC 60747-3-1

Semiconductor Devices - Discrete Devices Part 3: Signal (Including Switching) and Regulator Diodes Section One - Blank Detail Specification for Signal Diodes, Switching Diodes and Controlled-Avalanche Diodes-First Edition

IEC 60747-3-2

Semiconductor Devices - Discrete Devices Part 3: Signal (Including Switching) and Regulator Diodes Section Two - Blank Detail Specification for Voltage-Regulator Diodes and Voltage-Reference Diodes, Excluding Temperature-Compensated Precision Reference Diodes-First Edition

IEC 60747-4

Semiconductor Devices - Discrete Devices Part 4: Microwave Devices-Edtion 1.2: Edition 1: 1991 Consolidated with Amendments 1: 1993 and 2: 1999

IEC 60747-4-1

Semiconductor Devices - Discrete Devices - Part 4-1: Microwave Diodes and Transistors - Microwave Field Effect Transistors - Blank Detail Specification-First Edition

IEC 60747-4-2

Semiconductor Devices - Discrete Devices - Part 4-2: Microwave Diodes and Transistors - Integrated-Circuit Microwave Amplifiers - Blank Detail Specification-First Edition

IEC 60747-6-1

Semiconductor Devices Discrete Devices Part 6: Thyristors Section One - Blank Detail Specification for Reverse Blocking Triode Thyristors, Ambient and Case-Rated, up to 100 A-First Edition

IEC 60747-7

Semiconductor Devices - Part 7: Bipolar Transistors-Second Edition

IEC 60747-7-3

Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Three - Blank Detail Specification for Bipolar Transistors for Switching Applications-First Edition

IEC 60747-7-4

Semiconductor Devices Discrete Devices Part 7: Bipolar Transistors Section Four - Blank Detail Specification for Case-Rated Bipolar Transistors for High-Frequency Amplification-First Edition

IEC 60747-8

Semiconductor Devices - Part 8: Field-Effect Transistors-Second Edition

IEC 60747-8-1

Semiconductor Devices - Discrete Devices Part 8: Field-Effect Transistors Section One - Blank Detail Specification for Single-Gate Field-Effect Transistors, up to 5 W and 1 GHz-First Edition

IEC 60747-8-2

Semiconductor Devices Discrete Devices Part 8: Field-Effect Transistors Section Two - Blank Detail Specification for Field-Effect Transistors for Case-Rated Power Amplifier Applications-First Edition

IEC 60747-8-3

Semiconductor Devices - Discrete Devices - Part 8: Field-Effect Transistors - Section 3: Blank Detail Specification for Case-Rated Field-Effect Transistors for Switching Applications-First Edition

IEC 60747-8-4

Discrete semiconductor devices Part 8-4: Metal-oxide-semiconductor field-effect transistors (MOSFETs) for power switching applications

IEC 60748-1

Semiconductor Devices - Integrated Circuits - Part 1: General-Second Edition

IEC 60748-2-11

Semiconductor Devices - Integrated Circuits - Part 2-11: Digital Integrated Circuits - Blank Detail Specification for Single Supply Integrated Circuit, Electrically Erasable, and Programmable Read-Only Memory-First Edition; IECQ QC 790108

IEC 60748-21-1

Semiconductor Devices - Integrated Circuits - Part 21-1: Blank Detail Specification for Film Integrated Circuits and Hybrid Film Integrated Circuits on the Basis of Qualification Approval Procedures-Second Edition; IECQ QC 760101

IEC 60748-23-3

Semiconductor Devices - Integrated Circuits - Part 23-3: Hybrid Integrated Circuits and Film Structures - Manufacturing Line Certification - Manufacturers´ Self-Audit Checklist and Report-First Edition

IEC 60748-2-8

Semiconductor Devices Integrated Circuits - Part 2: Digital Integrated Circuits - Section Eight - Blank Detail Specification for Integrated Circuit Static Read/Write Memories-Edition 1; IECQ QC 790111

IEC 60748-2-9

Semiconductor Devices - Integrated Circuits - Part 2: Digital Integrated Circuits - Section 9: Blank Detail Specification for MOS Ultraviolet Light Erasable Electrically Programmable Read-Only Memories-Edition 1; IECQ QC 790106

IEC 60748-4-1

Semicondutor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Section 1: Blank Detail Specification for Linear Digital-to-Analogue Converters (DAC)-First Edition; IECQ QC 790303

IEC 60748-4-2

Semiconductor Devices - Integrated Circuits - Part 4: Interface Integrated Circuits - Section 2: Blank Detail Specification for Linear Analogue-to-Digital Converters (ADC)-First Edition; Same AS IECQ QC 790304

IEC 60749-10 CORR 1

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 10: Mechanical Shock CORRIGENDUM 1-First Edition

IEC 60749-12 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 12: Vibration, variable frequency CORRIGENDUM 1-First Edition

IEC 60749-13 CORR 1

Semiconductor Devices - Mechanical and Climatic Test Methods - Part 13: Salt Atmosphere CORRIGENDUM 1-First Edition

IEC 60749-14

Semiconductor devices Mechanical and climatic test methods Part 14: Robustness of terminations (lead integrity)-First Edition; Together with IEC 60749-31:2002, IEC 60749-3:2002 And IEC 60749-15:2003 Replaces IEC 60749:2002

IEC 60749-17

Semiconductor devices Mechanical and climatic test methods Part 17: Neutron irradiation-First Edition

IEC 60749-20 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 20: Resistance of plastic-encapsulated SMDs to the combined effect of moisture and soldering heat CORRIGENDUM 1-First Edition

IEC 60749-22 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 22: Bond strength CORRIGENDUM 1-First Edition

IEC 60749-29

Semiconductor devices Mechanical and climatic test methods Part 29:Latch-up test-First Edition; Replaces IEC PAS 62181

IEC 60749-31 CORR 1

SEMICONDUCTOR DEVICES – MECHANICAL AND CLIMATIC TEST METHODS – Part 31: Flammability of plastic-encapsulated devices (internally induced) CORRIGENDUM 1-First Edition

IEC 60749-36

Semiconductor devices Mechanical and climatic test methods Part 36: Acceleration, steady state-First Edition

IEC 60807-2

Rectangular Connectors for Frequencies Below 3 MHz - Part 2: Detail Specification for a Range of Connectors, with Assessed Quality, with Trapezoidal Shaped Metal Shells and Round Contacts - Fixed Solder Contact Types-Second Edition; Same AS IECQ QC 030000 XX 0001; Amendment 1: 01/1996

IEC 60852-2

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting-First Edition

IEC 60852-3

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations

IEC 60852-4

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations-First Edition

IEC 60852-5

Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores-First Edition

IEC 60952-3

Aircraft Batteries Part 3: Product Specification and Declaration of Design and Performance (DDP)-Second Edition

IEC 61021-2

Laminated Core Packages for Transformers and Inductors for Use in Telecommunication and Electronic Equipment - Part 2: Electrical Characteristics for Cores Using YEE 2 Laminations-First Edition

IEC 61076-3-103

Connectors for electronic equipment Part 3-103: Rectangular connectors Detail specification for single row connectors with non-removable ribbon cable contacts on 1,25 mm pitch used for high speed serial data (HSSDC)-Edition 1

IEC 61076-4-103

Connectors for Use in d.c. Low-Frequency Analogue and Digital High Speed Data Applications - Part 4-103: Printed Board Connectors with Assessed Quality - Detail Specification for Two-Part Connectors with Shielding and a Basic Grid of 2,5 mm-First Edition; IECQ QC 480301XX0004

IEC 61185

Ferrite cores (ETD-cores) intended for use in power supply applications – Dimensions-Edition 2

IEC 61188-5-6

Printed Boards and Printed Board Assemblies - Design and Use - Part 5-6: Attachment (Land/Joint) Considerations - Chip Carriers with J-Leads on Four Sides-First Edition; Replaces IEC 60321 Ed. 1.0: 1970 and IEC 60321-2 Ed. 1.0: 1987

IEC 61248-7

Transformers and Inductors for Use in Electronic and Telecommunication Equipment - Part 7: Sectional Specification for High-Frequency Inductors and Intermediate Frequency Transformers on the Basis of the Capability Approval Procedure-First Edition; QC 260600

IEC 61691-1-1

Behavioural languages Part 1-1: VHDL language reference manual-First Edition; IEEE 1076; Supersedes IEC 61691-1:1997

IEC 61691-5

Behavioural Languages - Part 5: VITAL ASIC (application specific integrated circuit) modeling specification modeling specification-First Edition; IEEE 1076.4

IEC 61747-2-2

Liquid crystal display devices Part 2-2: Matrix colour LCD modules Blank detail specification-First Edition; QC 720302

IEC 61926-1

Design Automation - Part 1: Standard Test Language for all Systems - Common Abbreviated Test Language for All Systems (C/ATLAS)-First Edition

IEC 61969-2

Mechanical Structures for Electronic Equipment - Outdoor Enclosures - Part 2: Sectional Specification - Coordination Dimensions for Cases and Cabinets-First Edition

IEC 61969-2-1

Mechanical Structures for Electronic Equipment - Outdoor Enclosures - Part 2-1: Detail Specification - Dimensions for Cabinets-First Edition

IEC 61988-1

Plasma display panels Part 1: Terminology and letter symbols-First Edition

IEC 61988-3-1

Plasma display panels Part 3-1: Mechanical interface-Edition 1

IEC 62007-1

Semiconductor Optoelectronic Devices for Fibre Optic System Applications - Part 1: Essential Ratings and Characteristics-Edition 1.1; Edition 1:1997 Consolidated with Amendment 1:1998

IEC TR 60828

Pin Allocations for Microprocessor Systems Using the IEC 603-2 Connector-First Edition

IEC TR 62014-3

Electronic design automation libraries Part 3: Models of integrated circuits for EMI behavioural simulation-First Edition

IEC TR 62225

Guidance On Terms for Connectors and Mechanical Structures in Electronic Equipment-First Edition

IEC TS 61587-3

Mechanical Structures for Electronic Equipment - Tests for IEC 60917 and IEC 60297 - Part 3: Electromagnetic Shielding Performance Tests for Cabinets, Racks and Subracks-First Edition

IEC 60130-10

Connectors for Frequencies Below 3 MHz Part 10: Connectors for Coupling an External Low-Voltage Power Supply to Portable Entertainment Equipment-First Edition

IEC 60130-17

Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Prmit Multi-Directional Mating, for Use with Rechargeble Batteries-First Edition

IEC 60130-3

Connectors for Frequencies Below 3 MHz (Mc/s) Part 3: Battery Connectors-First Edition

IEC 60130-6

Connectors for Frequencies Below 3 MHz (Mc/s) Part 6: Rectangular Miniature Multipole Connectors with Blade Contacts-First Edition

IEC 60130-7

Connectors for Frequencies Below 3 MHz Part 7: Circular Multipole Connectors with Bayonet or Push-Pull Coupling-First Edition

IEC 60352-1

Solderless Connections - Part 1: Wrapped Connections - General Requirements, Test Methods and Practical Guidance-Third Edition; Corrigendum: 10/1998

IEC 60512-25-2

Connectors for Electronic Equipment - Tests and Measurements - Part 25-2: Test 25b - Attenuation (Insertion Loss)-First Edition

IEC 60559

Binary Floating-Point Arithmetic for Microprocessor Systems-Edition 2

IEC 60740-2

Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials-First Edition