|
IEC 60071- 1 |
Insulation co-ordination – Part 1: Definitions, principles and rules-Edition 8 |
|
IEC 60071- 2 |
Insulation co-ordination - Part 2: Application guide-Third Edition |
|
IEC 60085 |
Electrical insulation Thermal classification-Third Edition |
|
IEC 60093 |
Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials Second Edition-Edition 2 |
|
IEC 60099- 1 |
Surge Arresters - Part 1: Non-Linear Resistor Type Gapped Surge Arresters for a.c. Systems-Edition 3.1; Edition 3: 1991 Consolidated with Amendment 1: 1999 |
|
IEC 60099- 4 |
Surge Arresters - Part 4: Metal-Oxide Surge Arresters without Gaps for a.c. Systems-Second Edition |
|
IEC 60099- 5 |
Surge Arresters - Part 5: Selection and Application Recommendations- Edition 1.1; Edition 1: 1996 Consolidated with Amendment 1: 1999 |
|
IEC 60099- 6 |
Surge Arresters - Part 6: Surge Arresters Containing Both Series and Parallel Gapped Structures - Rated 52 kV and Less-First Edition |
|
IEC 60112 |
Method for the Determination of the Proof and Comparative Tracking Indices of Solid Insulating Materials-Fourth Edition; Corrigendum 1: 06/2003; Corrigendum 2: 10/2003 |
|
IEC 60120 |
Dimensions of Ball and Socket Couplings of String Insulator Units- Edition 3 |
|
IEC 60137 |
Insulated bushings for alternating voltages above 1 000 V-Fifth Edition |
|
IEC 60156 |
Insulating Liquids - Determination of the Breakdown Voltage at Power Frequency - Test Method-Edition 2 |
|
IEC 60167 |
Methods of Test for the Determination of the Insulation Resistance of Solid Insulating Materials-First Edition |
|
IEC 60168 |
Tests on Indoor and Outdoor Post Insulators of Ceramic Material or Glass for Systems with Nominal Voltages Greater Than 1 000 V-Edition 4:1994 Consolidated with Amendments 1:1997 and 2:2000 |
|
IEC 60212 |
Standard Conditions for Use Prior to and During the Testing of Solid Electrical Insulating Materials-Second Edition |
|
IEC 60216- 1 |
Electrical Insulating Materials - Properties of Thermal Endurance - Part 1: Ageing Procedures and Evaluation of Test Results-Fifth Edition |
|
IEC 60216- 2 |
Electrical insulating materials Thermal endurance properties Part 2: Determination of thermal endurance properties of electrical insulating materials Choice of test criteria-Edition 4 |
|
IEC 60216- 3 |
Electrical Insulating Materials - Thermal Endurance Properties - Part 3: Instructions for Calculating Thermal Endurance Characteristics-First Edition; Corrigendum 1, 08/2002; Replaces IEC 60216-3-1 and 60216-3-2 |
|
IEC 60216-4- 1 |
Electrical insulating materials – Thermal endurance properties – Part 4-1: Ageing ovens – Single-chamber ovens-Fourth Edition |
|
IEC 60216-4- 2 |
Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-2: Ageing Ovens - Precision Ovens for Use Up to 300 Degrees Celsius-First Edition |
|
IEC 60216-4- 3 |
Elecrical Insulating Materials - Thermal Endurance Properties - Part 4-3: Ageing Ovens - Multi-Chamber Ovens-First Edition |
|
IEC 60216- 5 |
Electrical Insulating Materials - Thermal Endurance Properties - Part 5: Determination of Relative Thermal Endurance Index (RTE) of an Insulating Material-Second Edition |
|
IEC 60216- 6 |
Electrical insulating materials Thermal endurance properties Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method-First Edition; Corrigendum 1: 03/2005 |
|
IEC 60243- 1 |
Electrical Strength of Insulating Materials - Test Methods - Part 1: Tests at Power Frequencies-Second Edition |
|
IEC 60243- 2 |
Electric Strength of Insulating Materials - Test Methods - Part 2: Additional Requirements for Tests Using Direct Voltage-Second Edition |
|
IEC 60243- 3 |
Electric Strength of Insulating Materials - Test Methods - Part 3: Additional Requirements for 1,2/50 us Impulse Tests-Second Edition |
|
IEC 60247 |
Insulating liquids Measurement of relative permittivity, dielectric dissipation factor (tan) and d.c. resistivity-Third Edition |
|
IEC 60250 |
Recommended Methods for the Determination of the Permittivity and Dielectric Dissipation Factor of Electrical Insulating Materials at Power, Audio and Radio Frequencies Including Metre Wavelengths-First Edition |
|
IEC 60273 |
Characteristics of Indoor and Outdoor Post Insulators for Systems with Nominal Voltages Greater Than 1000 V-Edition 3 |
|
IEC 60296 |
Fluids for electrotechnical applications Unused mineral insulating oils for transformers and switchgear-Third Edition |
|
IEC 60305 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for A.C. Systems - Characteristics of Insulator Units of the Cap and Pin Type-Edition 4 |
|
IEC 60343 |
Recommended Test Methods for Determining the Relative Resistance of Insulating Materials to Breakdown by Surface Discharges-Edition 2; CENELEC EN 60343: 1992 |
|
IEC 60345 |
Method of Test for Electrical Resistance and Resistivity of Insulating Materials at Elevated Temperatures-First Edition |
|
IEC 60370 |
Test Procedure for Thermal Endurance of Insulating Varnishes - Electric Strength Method-Edition 1 |
|
IEC 60371- 1 |
Specification for Insulating Materials Based on Mica Part 1: Definitions and General Requirements-Third Edition |
|
IEC 60371- 2 |
Specification for insulating materials based on mica Part 2: Methods of test-Third Edition |
|
IEC 60371-3- 1 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 1: Commutator Separators and Materials-Second Edition |
|
IEC 60371-3- 2 |
Insulating materials based on mica Part 3: Specifications for individual materials Sheet 2: Mica paper-Edition 2 |
|
IEC 60371-3- 3 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 3: Specification for Rigid Mica Materials for Heating Equipment- First Edition |
|
IEC 60371-3- 4 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 4: Polyester Film-Backed Mica Paper with a B-Stage Epoxy Resin Binder-First Edition |
|
IEC 60371-3- 5 |
Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 5: Glass-Backed Mica Paper with an Epoxy Resin Binder for Post- Impregnation (VPI)-Second Edition |
|
IEC 60371-3- 6 |
Specification for Insulating Materials Based on Mica Part 3: Specifications for Individual Materials Sheet 6: Glass-Backed Mica Paper with a B-Stage Epoxy Resin Binder-First Edition |
|
IEC 60371-3- 7 |
Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 7: Polyester Film Mica Paper with an Epoxy Resin Binder for Single Conductor Taping-First Edition; Corrigendum 1: 08/1995 |
|
IEC 60371-3- 8 |
Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 8: Mica Paper Tapes for Flame-Resistant Security Cables-First Edition; Corrigendum 1: 08/1995 |
|
IEC 60371-3- 9 |
Insulating Materials Based on Mica - Part 3: Specifications for Individual Materials - Sheet 9: Moulding Micanite-First Edition; Corrigendum 1: 08/1995 |
|
IEC 60372 |
Locking Devices for Ball and Socket Couplings of String Insulator Units: Dimensions and Tests-Edition 3; Amendment 1-1991; Amendment 2 05-2003 |
|
IEC 60376 |
Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment-Edition 2 |
|
IEC 60377- 1 |
Recommended Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 1: General-First Edition |
|
IEC 60377- 2 |
Methods for the Determination of the Dielectric Properties of Insulating Materials at Frequencies Above 300 MHz Part 2: Resonance Methods-First Edition |
|
IEC 60383- 1 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 1: Ceramic or Glass Insulator Units for A.C. Systems - Definitions, Test Methods and Acceptance Criteria-Fourth Edition |
|
IEC 60383- 2 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V Part 2: Insulator Strings and Insulator Sets for A.C. Systems - Definitions, Test Methods and Acceptance Criteria-First Edition |
|
IEC 60394- 1 |
Varnished Fabrics for Electrical Purposes Part 1: Definitions and General Requirements-First Edition |
|
IEC 60394- 2 |
Varnished Fabrics for Electrical Purposes Part 2: Methods of Test-First Edition |
|
IEC 60394-3- 1 |
Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: Oleoresinous Varnish-Cotton Base, OR/C-First Edition |
|
IEC 60394-3- 2 |
Varnished Fabrics for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Glass-Fabric Based Varnished Fabrics with Epoxy, Polyurethane, Silicone, Polyester, Bituminous or Oleoresinous Varnish-First Edition |
|
IEC 60422 |
Mineral insulating oils in electrical equipment Supervision and maintenance guidance-Edition 3 |
|
IEC 60426 |
Test methods for determining electrolytic corrosion with insulating materials-Edition 1 |
|
IEC 60433 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic Insulators for a.c. Systems - Characteristics of Insulator Units of the Long Rod Type- Third Edition |
|
IEC 60437 |
Radio Interference Test on High-Voltage Insulators-Second Edition |
|
IEC 60450 |
Measurement of the average viscometric degree of polymerization of new and aged cellulosic electrically insulating materials-Second Edition |
|
IEC 60454- 1 |
Specifications for pressure-sensitive adhesive tapes for electrical purposes Part 1: General requirements-Second Edition |
|
IEC 60454- 2 |
Specification for pressure-sensitive adhesive tapes for electrical purposes Part 2: Methods of test-Second Edition |
|
IEC 60454-3- 1 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3 Specifications for individual materials Sheet 1: PVC film tapes with pressure-sensitive adhesive-Edition 2.1; Edition 2: 1998 Consolidated with Amendment 1: 2001 |
|
IEC 60454-3- 10 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials - Sheet 10: Requirements for cellulose-acetate-butyrate film tapes with rubber thermosetting adhesive-First Edition |
|
IEC 60454-3- 11 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 11: Combination Tapes Made of Creped Cellulosic Paper and Polyethylene Terephthalate Film with Rubber Thermosetting Adhesive- First Edition |
|
IEC 60454-3- 12 |
Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 12: Requirements for polyethylene and polypropylene film tapes with pressure sensitive adhesive-Edition 2 |
|
IEC 60454-3- 14 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 14: Polytetrafluoroethylene Film Tapes with Pressure-Sensitive Adhesive-First Edition |
|
IEC 60454-3- 15 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 4: Specifications for Individual Materials - Sheet 15: Polyester Film/Polyester Non-Woven Combinations with Rubber Thermosetting Adhesive-First Edition |
|
IEC 60454-3- 16 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 16: Polyester film/glass filament combinations with pressure-sensitive adhesive-First Edition |
|
IEC 60454-3- 17 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 17: Polyester/Epoxy Combinations with Pressure-Sensitive Adhesive-First Edition |
|
IEC 60454-3- 19 |
Pressure-sensitive adhesive tapes for electrical purposes Part 3: Specifications for individual materials Sheet 19: Tapes made from various backing materials with pressure-sensitive adhesive on both sides-First Edition |
|
IEC 60454-3- 2 |
Pressure-sensitive adhesive tapes for electrical purposes – Part 3: Specifications for individual materials – Sheet 2: Requirements for polyester film tapes with rubber thermosetting, rubber thermoplastic or acrylic crosslinked adhesives-Edition 3 |
|
IEC 60454-3- 3 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Polyester Film Tapes with Rubber Thermoplastic Adhesive-Second Edition |
|
IEC 60454-3- 4 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials Sheet 4: Cellulosic Paper, Creped, with Rubber Thermosetting Adhesive-Second Edition |
|
IEC 60454-3- 5 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 5: Cellulosic Paper, Non-Creped, with Rubber Thermosetting Adhesive-Second Edition |
|
IEC 60454-3- 6 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 6: Polycarbonate Film Tapes with Acrylic Thermoplastic Adhesive-Second Edition |
|
IEC 60454-3- 7 |
Pressure-Sensitive Adhesive Tapes for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 7: Polyimide Film Tapes with Pressure-Sensitive Adhesive-Second Edition |
|
IEC 60455- 1 |
Resin Based Reactive Compounds Used for Electrical Insulation - Part 1: Definitions and General Requirements-Second Edition |
|
IEC 60455- 2 |
Resin Based Reactive Compounds Used for Electrical Insulation - Part 2: Methods of Test-Second Edition |
|
IEC 60455-2- 2 |
Specification for solventless polymerisable resinous compounds used for electrical insulation Part 2: Methods of test Test methods for coating powders for electrical purposes-First Edition; Corrigendum 1: 08/1991 |
|
IEC 60455-3- 1 |
Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 1: Unfilled epoxy resinous compounds-Second Edition |
|
IEC 60455-3- 11 |
Specification for solventless polymerisable resinous compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 11: Epoxy resin-based coating powders-First Edition |
|
IEC 60455-3- 2 |
Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 2: Quartz filled epoxy resinous compounds- Second Edition |
|
IEC 60455-3- 3 |
Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 3: Unfilled polyurethane compounds-Second Edition |
|
IEC 60455-3- 4 |
Resin based reactive compounds used for electrical insulation Part 3: Specifications for individual materials Sheet 4: Filled polyurethane compounds-Second Edition |
|
IEC 60464- 1 |
Varnishes Used for Electrical Insulation - Part 1: Definitions and General Requirements-Second Edition; Amendment 1: 1/2006 |
|
IEC 60464- 2 |
Varnishes Used for Electrical Insulation - Part 2: Methods of Test-Second Edition; Amendment 1: 1/2006 |
|
IEC 60464-3- 1 |
Varnishes used for Electrical Insulation - Part 3: Specifications for Individual Materials - Sheet 1: Ambient Curing Finishing Varnishes-Second Edition; Amendment 1: 01/2006 |
|
IEC 60464-3- 2 |
Varnishes used for Electrical Insulation - Part 3: Specifications for Individual Materials - Sheet 2: Hot Curing Impregnating Varnishes-Second Edition |
|
IEC 60465 |
Specification for unused insulating mineral oils for cables with oil ducts-Edition 2 |
|
IEC 60471 |
Dimensions of Clevis and Tongue Couplings of String Insulator Units- Second Edition; Amendment 1: 7/1980 |
|
IEC 60475 |
Method of Sampling Liquid Dielectrics-First Edition |
|
IEC 60480 |
Guidelines for the checking and treatment of sulfur hexafluoride (SF6 ) taken from electrical equipment and specification for its re-use-Second Edition |
|
IEC 60493- 1 |
Guide for the statistical analysis of ageing test data Part 1: Methods based on mean values of normally distributed test results-First Edition |
|
IEC 60505 |
Evaluation and Qualification of Electrical Insulation Systems-Third Edition; Supersedes IEC 60791:1984, IEC 60792-1:1985, IEC 60941:1988, IEC 61356:1995 and IEC 61359:1995 |
|
IEC 60507 |
Artificial Pollution Tests on High-Voltage Insulators to Be Used on A.C. Systems-Second Edition |
|
IEC 60544- 1 |
Electrical Insulating Materials - Determination of the Effects of Ionizing Radiation - Part 1: Radiation Interaction and Dosimetry-Second Edition |
|
IEC 60544- 2 |
Guide for Determining the Effects of Ionizing Radiation on Insulating Materials Part 2: Procedures for Irradiation and Test-Second Edition |
|
IEC 60544- 4 |
Electrical insulating materials Determination of the effects of ionizing radiation Part 4: Classification system for service in radiation environments-Second Edition |
|
IEC 60544- 5 |
Electrical insulating materials Determination of the effects of ionizing radiation Part 5: Procedures for assessment of ageing in service-First Edition |
|
IEC 60554- 1 |
Specification for Cellulosic Papers for Electrical Purposes Part 1: Definitions and General Requirements-First Edition; Erratum 1: 03/1979; Amendment 1: 12- 1983 |
|
IEC 60554- 2 |
Cellulosic papers for electrical purposes Part 2: Methods of test-Second Edition |
|
IEC 60554-3- 1 |
Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 1: General Purpose Electrical Paper-First Edition |
|
IEC 60554-3- 2 |
Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 2: Capacitor Paper-First Edition |
|
IEC 60554-3- 3 |
Specification for Cellulosic Papers for Electrical Purposes Part 3: Specification for Individual Materials Sheet 3: Crepe Paper-First Edition |
|
IEC 60554-3- 4 |
Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 4: Electrolytic Capacitor Paper-First Edition |
|
IEC 60554-3- 5 |
Specification for Cellulosic Papers for Electrical Purposes Part 3: Specifications for Individual Materials Sheet 5: Special Papers-First Edition |
|
IEC 60567 |
Guide for the Sampling of Gases and of Oil from Oil-Filled Oil-filled electrical equipment Sampling of gases and of oil for analysis of free and dissolved gases Guidance-Edition 3 |
|
IEC 60575 |
Thermal-Mechanical Performance Test and Mechanical Performance Test on String Insulator Units First Edition |
|
IEC 60587 |
Test Methods for Evaluating Resistance to Tracking and Erosion of Electrical Insulating Materials Used under Severe Ambient Conditions-Edition 2 |
|
IEC 60588- 1 |
Askarels for Transformers and Capacitors Part 1: General-First Edition |
|
IEC 60588- 2 |
Askarels for Transformers and Capacitors Part 2: Test Methods-First Edition |
|
IEC 60588- 3 |
Askarels for Transformers and Capacitors Part 3: Specifications for New Askarels-First Edition |
|
IEC 60588- 4 |
Askarels for Transformers and Capacitors Part 4: Guide for Maintenance of Transformer Askarel in Equipment-First Edition |
|
IEC 60588- 5 |
Askarels for Transformers and Capacitors Part 5: Screening Test for Compatibility of Materials and Transformer Askarels-First Edition |
|
IEC 60588- 6 |
Askarels for Transformers and Capacitors Part 6: Screening Test for Effects of Materials on Capacitor Askarels-First Edition |
|
IEC 60589 |
Methods of Test for the Determination of Ionic Impurities in Electrical Insulating Materials by Extraction with Liquids-Edition 1; Corrigendum: 6/1978 |
|
IEC 60590 |
Determination of the Aromatic Hydrocarbon Content of New Mineral Insulating Oils-Edition 1; Corrigendum: 7/1978 |
|
IEC 60599 |
Mineral Oil-Impregnated Electrical Equipment in Service - Guide to the Interpretation of Dissolved and Free Gases Analysis-Second Edition |
|
IEC 60626- 1 |
Combined flexible materials for electrical insulation - Part 1: Definitions and general requirements-Second Edition; Amendment 1: 08/1996 |
|
IEC 60626- 2 |
Combined flexible materials for electrical insulation - Part 2: Methods of test-Second Edition |
|
IEC 60626- 3 |
Combined Flexible Materials for Electrical Insulation - Part 3: Specifications for Individual Materials-Edition 2.1; Edition 2: 1996 Consolidated with Amendment 1: 1999 |
|
IEC 60628 |
Gassing of Insulating Liquids under Electrical Stress and Ionization- Edition 2; Corrigendum: 10/1986 |
|
IEC 60641- 1 |
Specification for pressboard and presspaper for electrical purposes. Part 1: Definitions and general requirements-First Edition; Amendment 1: 06/1993 |
|
IEC 60641- 2 |
Pressboard and presspaper for electrical purposes Part 2: Methods of tests-Second Edition |
|
IEC 60641-3- 1 |
Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for pressboard, types B.0.1, B.2.1, B.2.3, B.3.1, B.3.3, B.4.1, B.4.3, B.5.1, B.6.1 and B.7.1-First Edition |
|
IEC 60641-3- 2 |
Specification for pressboard and presspaper for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for presspaper, types P.2.1, P.4.1, P.4.2, P.4.3, P.6.1 and P.7.1-First Edition |
|
IEC 60648 |
Method of Test for Coefficients of Friction of Plastic Film and Sheeting for Use as Electrical Insulation First Edition |
|
IEC 60660 |
Insulators - Tests on Indoor Post Insulators of Organic Material for Systems with Nominal Voltages Greater Than 1 000 V up to but Not Including 300 kV-Second Edition |
|
IEC 60664- 1 |
Insulation Coordination for Equipment within Low-Voltage Systems - Part 1: Principles, Requirements and Tests-Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 2000 and 2: 2002; Corrigendum 1: 11/2002 |
|
IEC 60664-2- 1 |
Insulation coordination for equipment within low-voltage systems Part 2-1: Application guide Dimensioning procedure worksheets and dimensioning examples-First Edition |
|
IEC 60664- 3 |
Insulation coordination for equipment within low-voltage systems Part 3: Use of coating, potting or moulding for protection against pollution-Second Edition |
|
IEC 60664- 4 |
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress-Second Edition |
|
IEC 60664- 5 |
Insulation coordination for equipment within low-voltage systems Part 5: A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm-First Edition |
|
IEC 60666 |
Detection and Determination of Specified Anti-Oxidant Additives in Insulating Oils-Edition 1 |
|
IEC 60667- 1 |
Specification for vulcanized fibre for electrical purposes. Part 1: Definitions and general requirements-First Edition |
|
IEC 60667- 2 |
Specification for vulcanized fibre for electrical purposes. Part 2: Methods of test-First Edition; Amendment 1: 02/1986 |
|
IEC 60667-3- 1 |
Specification for vulcanized fibre for electrical purposes. Part 3: Specifications for individual materials. Sheet 1: Flat sheets-First Edition |
|
IEC 60672- 1 |
Ceramic and glass insulating materials - Part 1: Definitions and classification-Second Edition |
|
IEC 60672- 2 |
Ceramic and Glass Insulating Materials - Part 2: Methods of Test-Second Edition |
|
IEC 60672- 3 |
Ceramic and Glass-Insulating Materials Part 3: Specifications for Individual Materials-Second Edition |
|
IEC 60674- 1 |
Specification for plastic films for electrical purposes Part 1: Definitions and general requirements-First Edition |
|
IEC 60674- 2 |
Specification for plastic films for electrical purposes. Part 2: Methods of test-First Edition; Corrigendum 1: 11/1995; Amendment 1: 10/2001 |
|
IEC 60674-3- 1 |
Plastic Films for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Biaxially Oriented Polypropylene (PP) Films for Capacitors-First Edition |
|
IEC 60674-3- 2 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation-First Edition |
|
IEC 60674-3- 3 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Requirements for polycarbonate (PC) films used for electrical insulation-First Edition |
|
IEC 60674-3-4 TO 6 |
Specification for Plastic Films for Electrical Purposes Part 3: Specifications for Individual Materials Sheets 4 to 6: Requirements for Polyimide Films Used for Electrical Insulation First Edition |
|
IEC 60674-3- 7 |
Specification for plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Requirements for fluoroethylene-propylene (FEP) films used for electrical insulation-First Edition |
|
IEC 60684- 1 |
Flexible insulating sleeving Part 1: Definitions and general requirements- Second Edition |
|
IEC 60684- 2 |
Flexible Insulating Sleeving - Part 2: Methods of Test-Edition 2.1; Edition 2: 1997 Consolidated with Amendment 1:2003; Amendment 2:2005 |
|
IEC 60684-3-100 TO 105 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 100 to 105: Extruded PVC Sleeving-Second Edition |
|
IEC 60684-3-116 AND 117 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 116 and 117: Extruded polychloroprene General purpose-Second Edition |
|
IEC 60684-3-121 TO 124 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 121 and 124: Extruded Silicone Sleeving-Second Edition; Supersedes IEC 60684-3-123 AND 124: 1992 |
|
IEC 60684-3- 136 |
Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving - General Purpose-First Edition; Corrigendum: 02-1999 |
|
IEC 60684-3-145 TO 147 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 145 to 147: Extruded PTFE Sleeving-First Edition |
|
IEC 60684-3- 151 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 151: Extruded PVC/Nitrile Rubber - General Purpose-First Edition |
|
IEC 60684-3- 165 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving-First Edition |
|
IEC 60684-3- 209 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 209: Heat-shrinkable polyolefin sleeving, general purpose, flame retarded, shrink ratio 2:1-Second Edition |
|
IEC 60684-3- 211 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 211: Heat-Shrinkable Sleeving, Semi-Rigid Polyolefin, Shrink Ratio 2:1- Second Edition |
|
IEC 60684-3- 212 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 212: Heat-Shrinkable Polyolefin Sleevings-Second Edition; Supersedes IEC 60684-3-213: 1998; IEC 60684-3-217: 1998 And IEC 60684-3-218: 1998 |
|
IEC 60684-3- 214 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 214: Heat-Shrinkable, Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1 - Thick and Medium Wall-Second Edition |
|
IEC 60684-3- 216 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 216: Heat-Shrinkable, Flame-Retarded, Limited-Fire-Hazard Sleeving- Edition 1.1; Consolidated Reprint |
|
IEC 60684-3- 228 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1-Second Edition |
|
IEC 60684-3- 229 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1-First Edition |
|
IEC 60684-3- 233 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 233: Heat-Shrinkable Fluoroelastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1-Second Edition |
|
IEC 60684-3-240 TO 243 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 240 to 243: Heat-Shrinkable PTFE Sleeving-Second Edition |
|
IEC 60684-3- 246 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 246: Heat-Shrinkable Polyolefin Sleeving, Dual-Wall, Not Flame-Retarded- Second Edition |
|
IEC 60684-3- 271 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1-Second Edition; Replaces 60684-3-272:1998 |
|
IEC 60684-3- 300 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 300: Glass Textile Fibre Sleeving, Braided, Uncoated |
|
IEC 60684-3- 320 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 320: Polyethylene Terephthalate Textile Sleeving, Lightly Impregnated- Second Edition |
|
IEC 60684-3-340 TO 342 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 340 to 342: Expandable braided polyethylene terephthalate textile sleeving- Second Edition |
|
IEC 60684-3-343 TO 345 |
Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheets 343 to 345: Expandable Braided Ethylene Chlorotrifluoroethylene (E-CTFE) Textile Sleeving, Uncoated-Second Edition |
|
IEC 60684-3-400 TO 402 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating- Second Edition |
|
IEC 60684-3-403 TO 405 |
Flexible Insulating Sleeving - Part 3: Specification Individual Types of Sleeving - Sheets 403 to 405: Glass Textile Sleeving with Acrylic Based Coating-Second Edition |
|
IEC 60684-3-406 TO 408 |
Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheets 406 to 408: Glass textile sleeving with PVC coating-Second Edition |
|
IEC 60684-3- 409 |
Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 409: Glass Textile Sleeving with Polyurethane (PUR)-Based Coating- Edition 1 |
|
IEC 60684-3-420 TO 422 |
Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheets 420 to 422: Polyethylene Terephthalate Textile Sleeving with Acrylic Based Coating-Second Edition |
|
IEC 60720 |
Characteristics of Line Post Insulators-Edition 1 |
|
IEC 60727- 1 |
Evaluation of Electrical Endurance of Electrical Insulation Systems Part 1: General Considerations and Evaluation Procedures Based on Normal Distributions-First Edition |
|
IEC 60727- 2 |
Evaluation of Electrical Endurance of Electrical Insulation Systems Part 2: Evaluation Procedures Based on Extreme-Value Distributions-First Edition |
|
IEC 60763- 1 |
Specification for Laminated Pressboard Part 1: Definitions, Classification and General Requirements-First Edition; CENELEC EN 60 763-1: 1996 |
|
IEC 60763- 2 |
Specification for Laminated Pressboard Part 2: Methods of Test-First Edition |
|
IEC 60763-3- 1 |
Specification for Laminated Pressboard Part 3: Specifications for Individual Materials Sheet 1: Specifications for Laminated Precompressed Board Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2-First Edition |
|
IEC 60797 |
Residual Strength of String Insulator Units of Glass or Ceramic Material for Overhead Lines After Mechanical Damage of the Dielectric-First Edition |
|
IEC 60814 |
Insulating Liquids - Oil-Impregnated Paper and Pressboard - Determination of Water by Automatic Coulometric Karl Fischer Titration-Second Edition |
|
IEC 60815 |
Guide for the Selection of Insulators in Respect of Polluted Conditions First Edition |
|
IEC 60819- 1 |
Non-cellulosic papers for electrical purposes - Part 1: Definitions and general requirements-Second Edition; Amendment 1: 08/1996 |
|
IEC 60819- 2 |
Non-Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test- First Edition |
|
IEC 60819-3- 1 |
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specification for Individual Materials - Sheet 1: Filled Glass Paper-First Edition |
|
IEC 60819-3- 2 |
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper-First Edition |
|
IEC 60819-3- 3 |
Specification for non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers- First Edition |
|
IEC 60819-3- 4 |
Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 4: Aramid Fibre Paper Containing Not More Than 50 % of Mica Particles-First Edition |
|
IEC 60836 |
Specifications for unused silicone insulating liquids for electrotechnical purposes-Edition 2 |
|
IEC 60867 |
Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons-Second Edition |
|
IEC 60893- 1 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements-Second edition |
|
IEC 60893- 2 |
Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 2: Methods of test-Second Edition |
|
IEC 60893-3- 1 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials Requirements for types of industrial rigid laminated sheets-Second Edition |
|
IEC 60893-3- 2 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-2: Specifications for individual materials Requirements for rigid laminated sheets based on epoxy resins-Second Edition |
|
IEC 60893-3- 3 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-3: Specifications for individual materials Requirements for rigid laminated sheets based on melamine resins-Second Edition |
|
IEC 60893-3- 4 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials Requirements for rigid laminated sheets based on phenolic resins-Second Edition |
|
IEC 60893-3- 5 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-5: Specifications for individual materials Requirements for rigid laminated sheets based on polyester resins-Second Edition |
|
IEC 60893-3- 6 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials Requirements for rigid laminated sheets based on silicone resins-Second Edition |
|
IEC 60893-3- 7 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-7: Specifications for individual materials Requirements for rigid laminated sheets based on polyimide resins-Second Edition |
|
IEC 60897 |
Methods for the Determination of the Lightning Impulse Breakdown Voltage of Insulating Liquids-First Edition |
|
IEC 60944 |
Guide for the Maintenance of Silicone Transformer Liquids-First Edition |
|
IEC 60962 |
Maintenance and Use Guide for Petroleum Lubricating Oils for Steam Turbines-First Edition |
|
IEC 60963 |
Specification for Unused Polybutenes-First Edition |
|
IEC 60970 |
Methods for Counting and Sizing Particles in Insulating Liquids First Edition |
|
IEC 60978 |
Maintenance and Use Guide for Triaryl Phosphate Ester Turbine Control Fluids-First Edition |
|
IEC 61006 |
Electrical insulating materials Methods of test for the determination of the glass transition temperature-Second Edition |
|
IEC 61033 |
Test Methods for the Determination of Bond Strength of Impregnating Agents to an Enamelled Wire Substrate-First Edition; Replaces IEC 60290: 1969 and IEC 60699: 1981 |
|
IEC 61039 |
General Classification of Insulating Liquids-First Edition |
|
IEC 61061- 1 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 1: Definitions, Designation and General Requirements-Second Edition |
|
IEC 61061- 2 |
Specification for Non-Impregnated, Densified Laminated Wood for Electrical Purposes - Part 2: Methods of Test-Edition 1.1; Edition 1:1992 Consolidated with Amendment 1:2001 |
|
IEC 61061-3- 1 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 1: Sheets Produced from Beech Veneer-First Edition |
|
IEC 61061-3- 2 |
Non-Impregnated Densified Laminated Wood for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Rings Produced from Beech Veneer-First Edition |
|
IEC 61065 |
Method for Evaluating the Low Temperature Flow Properties of Mineral Insulating Oils After Ageing-First Edition; Corrigendum 1: 12/1993 |
|
IEC 61067- 1 |
Specification for Glass and Glass Polyester Fibre Woven Tapes Part 1: Definitions, Classification and General Requirements-Edition 1 |
|
IEC 61067- 2 |
Specification for Glass and Glass Polyester Fibre Woven Tapes Part 2: Methods of Test-Edition 1 |
|
IEC 61067-3- 1 |
Glass and Glass Polyester Fibre Woven Tapes - Part 3: Specifications for Individual Materials - Sheet 1: Type 1, 2 and 3 Tapes-Edition 1 |
|
IEC 61068- 1 |
Specification for Polyester Fibre Woven Tapes Part 1: Definitions, Designation and General Requirements-Edition 1 |
|
IEC 61068- 2 |
Specification for Polyester Fibre Woven Tapes Part 2: Methods of Test- Edition 1 |
|
IEC 61068-3- 1 |
Polyester Fibre Woven Tapes Part 3: Specifications for Individual Materials Sheet 1: Tapes Woven on Conventional or Shuttleless Looms-Second Edition; Corrigendum- 1998 |
|
IEC 61074 |
Determination of Heats and Temperatures of Melting and Crystallization of Electrical Insulating Materials by Differential Scanning Calorimetry-First Edition |
|
IEC 61086- 1 |
Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements-Second Edition |
|
IEC 61086- 2 |
Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test-Second Edition; Corrigendum 1: 01/2005 |
|
IEC 61086-3- 1 |
Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace (Class 3)-Second Edition |
|
IEC 61099 |
Specifications for Unused Synthetic Organic Esters for Electrical Purposes-First Edition; Corrigendum 1: 12/1993 |
|
IEC 61100 |
Classification of Insulating Liquids According to Fire-Point and Net Calorific Value-First Edition |
|
IEC 61109 |
Composite Insulators for A.C. Overhead Lines with a Nominal Voltage Greater Than 1 000 V - Definitions, Test Methods and Acceptance Criteria-First Edition; Amendment 1: 4/1995 |
|
IEC 61125 |
Unused Hydrocarbon-Based Insulating Liquids - Test Methods for Evaluating the Oxidation Stability-First Edition; Corrigendum 1: 9/1992; Amendment 1: 04/2004; Replaces IEC 60474:1974 and IEC 60813:1985 |
|
IEC 61144 |
Test Method for the Determination of Oxygen Index of Insulating Liquids-First Edition |
|
IEC 61181 |
Impregnated Insulating Materials - Application of Dissolved Gas Analysis (DGA) to Factory Tests on Electrical Equipment-First Edition |
|
IEC 61197 |
Insulating Liquids - Linear Flame Propagation - Test Method Using a Glass-Fibre Tape-First Edition |
|
IEC 61198 |
Mineral Insulating Oils - Methods for the Determination of 2-Furfural and Related Compounds-First Edition |
|
IEC 61203 |
Synthetic Organic Esters for Electrical Purposes - Guide for Maintenance of Transformer Esters in Equipment-First Edition |
|
IEC 61211 |
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1 000 V - Impulse puncture testing in air-Second Edition |
|
IEC 61212- 2 |
Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 2: Methods of Test-First Edition |
|
IEC 61212-3- 2 |
Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Round Laminated Moulded Tubes-First Edition |
|
IEC 61212-3- 3 |
Industrial Rigid Round Laminated Tubes and Rods Based on Thermosetting Resins for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 3: Round Laminated Moulded Rods-First Edition |
|
IEC 61221 |
Petroleum Products and Lubricants - Triaryl Phosphate Ester Turbine Control Fluids (Category ISO-L-TCD) - Specifications-Second Edition |
|
IEC 61234- 1 |
Method of test for the hydrolitic stability of electrical insulating materials - Part 1: Plastic films-First Edition |
|
IEC 61234- 2 |
Electrical Insulating Materials - Methods of Test for the Hydrolytic Stability - Part 2: Moulded Thermosets-First Edition |
|
IEC 61244- 1 |
Determination of long-term radiation ageing in polymers - Part 1: Techniques for monitoring diffusion-limited oxidation-First Edition |
|
IEC 61245 |
Artificial Pollution Tests on High-Voltage Insulators to Be Used on D.C. Systems-First Edition |
|
IEC 61251 |
Electrical Insulating Materials - A.C. Voltage Endurance Evaluation - Introduction-First Edition |
|
IEC 61302 |
Electrical Insulating Materials - Method to Evaluate the Resistance to Tracking and Erosion - Rotating Wheel Dip Test-First Edition; Corrigendum 1:September 1995 |
|
IEC 61325 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - Ceramic or Glass Insulator Units for D.C. Systems - Definitions, Test Methods and Acceptance Criteria-First Edition |
|
IEC 61340-2- 1 |
Electrostatics - Part 2-1: Measurement Methods - Ability of Materials and Products to Dissipate Static Electric Charge-First Edition |
|
IEC 61340-2- 3 |
Electrostatics - Part 2-3: Methods of Test for Determining the Resistaance and Resistivity of Solid Planar Materials Used to Avoid Electrostatic Charge Accumulation- First Edition |
|
IEC 61340-3- 1 |
Electrostatics - Part 3-1: Methods for Simulation of Electrostatic Effects - Human Body Model (HBM) - Component Testing-First Edition |
|
IEC 61340-3- 2 |
Electrostatics - Part 3-2: Methods for Simulation of Electrostatic Effects - Machine Model (MM) - Component Testing-First Edition |
|
IEC 61340-4- 1 |
Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors-Second Edition |
|
IEC 61340-4- 3 |
Electrostatics - Part 4-3: Standard Test Methods for Specific Applications - Footwear-First Edition |
|
IEC 61340-4- 4 |
Electrostatics Part 4-4: Standard test methods for specific applications Electrostatic classification of flexible intermediate bulk containers (FIBC)-First Edition |
|
IEC 61340-4- 5 |
Electrostatics Part 4-5: Standard test methods for specific applications Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person-First Edition |
|
IEC 61466- 1 |
Composite String Insulator Units for Overhead Lines with a Nominal Voltage Greater Than 1 000 V - Part 1: Standard Strength Classes and End Fittings-First Edition |
|
IEC 61466- 2 |
Composite String Insulator Units for Overhead Lines with a Nominal Voltage Greater Than 1 000 V - Part 2: Dimensional and Electrical Characteristics-Edition 1.1; Edition 1:1998 Consolidated with Amendment 1:2002 |
|
IEC 61619 |
Insulating Liquids - Contamination by Polychlorinated Biphenyls (PCBs) - Method of Determination by Capillary Column Gas Chromatography-First Edition; Replaces IEC 60997 |
|
IEC 61620 |
Insulating Liquids - Determination of the Dielectric Dissipation Factor by Measurement of the Conductance and Capacitance - Test Method-First Edition |
|
IEC 61621 |
Dry, Solid Insulating Materials - Resistance Test to High-Voltage, Low-Current Arc Discharges-First Edition |
|
IEC 61628- 1 |
Corrugated Pressboard and Presspaper for Electrical Purposes - Part 1: Definitions, Designations and General Requirements-First Edition |
|
IEC 61628- 2 |
Corrugated Pressboard and Presspaper for Electrical Purposes - Part 2: Methods of Test-First Edition |
|
IEC 61629- 1 |
Aramid pressboard for electrical purposes Part 1: Definitions, designations and general requirements |
|
IEC 61629- 2 |
Aramid pressboard for electrical purposes Part 2: Methods of test |
|
IEC 61643- 1 |
Low-voltage surge protective devices Part 1: Surge protective devices connected to low-voltage power distribution systems Requirements and tests-Edition 2.0 |
|
IEC 61643- 12 |
Low-Voltage Surge Protective Devices - Part 12: Surge Protective Devices Connected to Low-Voltage Power Distribution Systems - Selection and Application Principles-First Edition |
|
IEC 61643- 21 |
Low Voltage Surge Protective Devices - Part 21: Surge Protective Devices Connected to Telecommunications and Signalling Networks - Performance Requirements and Testing Methods-First Edition; Corrigendum 1: 2001 |
|
IEC 61643- 22 |
Low-voltage surge protective devices Part 22: Surge protective devices connected to telecommunications and signalling networks Selection and application principles-First Edition |
|
IEC 61643- 311 |
Components for Low-Voltage Surge Protective Devices - Part 311: Specification for Gas Discharge Tubes (GDT)-First Edition |
|
IEC 61643- 321 |
Components for Low-Voltage Surge Protective Devices - Part 321: Specification for Avalanche Breakdown Diode (ABD)-First Edition |
|
IEC 61643- 331 |
Components for low-voltage surge protective devices Part 331: Specification for metal oxide varistors (MOV)-First Edition |
|
IEC 61643- 341 |
Components for Low-Voltage Surge Protective Devices - Part 341: Specification for Thyristor Surge Suppressors (TSS)-First Edition |
|
IEC 61857- 1 |
Electrical insulation systems Procedures for thermal evaluation Part 1: General requirements Low-voltage-Second Edition |
|
IEC 61857- 21 |
Electrical insulation systems Procedures for thermal evaluation Part 21: Specific requirements for general-purpose models Wire-wound applications-Second Edition |
|
IEC 61857- 22 |
Electrical Insulation Systems - Procedures for Thermal Evaluation - Part 22: Specific Requirements for Encapsulated-Coil Model - Wire-Wound Electrical Insulation System (EIS)-First Edition |
|
IEC 61858 |
Electrical insulation systems Thermal evaluation of modifications to an established wire-wound EIS-Second Edition |
|
IEC 61868 |
Mineral Insulating Oils - Determination of Kinematic Viscosity at Very Low Temperatures-First Edition |
|
IEC 61952 |
Insulators for Overhead Lines - Composite Line Post Insulators for Alternative Current with a Normal Voltage Greater Than 1 000 V-First Edition |
|
IEC 62011- 1 |
Insulating Materials - Industrial, Rigid, Moulded, Laminated Tubes and Rods of Rectangular and Hexagonal Cross-Section Based on Thermosetting Resins for Electrical Purposes - Part 1: Definitions, Designations and General Requirements-First Edition |
|
IEC 62011- 2 |
Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Part 2: Methods of test-First Edition |
|
IEC 62011-3- 1 |
Insulating materials Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes Part 3-1: Specifications for individual materials Tubes and rods of rectangular a |
|
IEC 62021- 1 |
Insulating liquids Determination of acidity Part 1: Automatic potentiometric titration-First Edition |
|
IEC 62068- 1 |
Electrical insulation systems Electrical stresses produced by repetitive impulses Part 1: General method of evaluation of electrical endurance-First Edition |
|
IEC 62114 |
Electrical Insulation Systems (EIS) - Thermal Classification-First Edition |
|
IEC 62155 |
Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V-First Edition; Replaces IEC 60233: 1974 and IEC 61264: 1998 |
|
IEC 62199 |
Bushings for d.c. application-First Edition |
|
IEC 62217 |
Polymeric insulators for indoor and outdoor use with a nominal voltage >1 000 V General definitions, test methods and acceptance criteria-Edition 1 |
|
IEC 62329- 1 |
Heat shrinkable moulded shapes Part 1: Definitions and general requirements-First Edition |
|
IEC PAS 60099- 7 |
Surge arresters Part 7: Glossary of terms and definitions from IEC publications 60099-1, 60099-4, 60099-6, 61643-1, 61643-12, 61643-21, 61643-311, 61643-321, 61643-331 and 61643-341-First Edition |
|
IEC TR 60071- 4 |
Insulation co-ordination Part 4: Computational guide to insulation co- ordination and modelling of electrical networks-First Edition |
|
IEC TR 60099- 3 |
Surge Arresters Part 3: Artificial Pollution Testing of Surge Arresters-First Edition |
|
IEC TR 60664-2- 1 |
Insulation Coordination for Equipment within Low-Voltage Systems - Part 2-1: Application Guide - Dimensioning Procedure Worksheets and Dimensioning Examples- First Edition |
|
IEC TR 60664-2- 2 |
Insulation coordination for equipment within low-voltage systems Part 2-2: Interface considerations Application guide-First Edition |
|
IEC TR 60893- 4 |
Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 4: Typical values-First Edition |
|
IEC TR 61244- 2 |
Determination of Long-Term Radiation Ageing in Polymers - Part 2: Procedures for Predicting Ageing at Low Dose Rates-Edition 1 |
|
IEC TR 61294 |
Insulating Liquids - Determination of the Partial Discharge Inception Voltage (PDIV) - Test Procedure-First Edition |
|
IEC TR 61340-2- 2 |
Electrostatics - Part 2-2: Measurement Methods - Measurement of Chargeability-First Edition |
|
IEC TR 61340-5- 1 |
Electrostatics - Part 5-1: Protection of Electronic Devices from Electrostatic Phenomena - General Requirements-Edition 1 |
|
IEC TR 61462 |
Composite Insulators - Hollow Insulators for Use in Outdoor and Indoor Electrical Equipment - Definitions, Test Methods, Acceptance Criteria and Design Recommendations-First Edition |
|
IEC TR 61464 |
Insulated Bushings - Guide for the Interpretation of Dissolved Gas Analysis (DGA) in Bushings where Oil is the Impregnating Medium of the Main Insulation (General Paper)-First Edition; Corrigendum 1: 1/2003 |
|
IEC TR 61467 |
Insulators for Overhead Lines with a Nominal Voltage Above 1 000 V - AC Power Arc Tests on Insulator Sets-First Edition; Corrigendum May 1997 |
|
IEC TR 61624 |
Guidance on the Development of Lists of Maximum Allowable Temperatures for Polymeric Compounds Used in Electrotechnical Equipment-First Edition |
|
IEC TR 62062 |
Results of the Round Robin Series of Tests to Evaluate Proposed Amendments to IEC 60112-First Edition; Corrigendum 1: 09/2002; Corrigendum 2: 12/2002 |
|
IEC TS 60071- 5 |
Insulation co-ordination - Part 5: Procedures for high-voltage direct current (HVDC) converter stations-First Edition |
|
IEC TS 61244- 3 |
Long-term radiation ageing in polymers Part 3: Procedures for in-service monitoring of low-voltage cable materials-Edition 2 |
|
IEC TS 61340-5- 2 |
Electrostatics - Part 5-2: Protection of Electronic Devices from Electrostatic Phenomena - User Guide-First Edition |
|
IEC TS 61463 |
Bushings - Seismic Qualification-Edition 1.1; Edition 1:1996 Consolidated with Amendment 1:2000 |
|
IEC TS 61956 |
Methods of Test for the Evaluation of Water Treeing in Insulating Materials-First Edition |
|
IEC TS 62073 |
Guidance on the measurement of wettability of insulator surfaces- First Edition |
|
IEC TS 62101 |
Electrical insulation systems Short-time evaluation of combined thermal and electrical stresses-Edition 1 |
|
IEC TS 62332- 1 |
Electrical insulation systems (EIS) Thermal evaluation of combined liquid and solid components Part 1: General requirements-Edition 1 |