|
IEC 60502-1 |
Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1: Cables for Rated Voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6kV)-Edition 2: 04/2004 |
|
IEC 60502-2 |
Power Cables with Extruded Insulation and Their Accessories for Rated Voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 2: Cables for Rated Voltages from 6 kV (Um = 7,2 kV) and up to 30 kV (Um = 36 kV)-Edition 2 |
|
IEC 60068-2-6 |
Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal)-Sixth Edition; Corrigendum 1: 03/1995 |
|
IEC 60228 |
Conductors of Insulated Cables-Third Edition |
|
IEC 60384-14 |
Fixed capacitors for use in electronic equipment Part 14: Sectional specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains-Third Edition; |
|
IEC 60227-1 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V Part 1: General Requirements-Edition 2.2; Edition 2: 1993 Consolidated with Amendments 1: 1995 and 2: 1997 |
|
IEC 60332-1-1 |
Tests on electric and optical fibre cables under fire conditions Part 1-1: Test for vertical flame propagation for a single insulated wire or cable Apparatus-First Edition |
|
IEC 60331-11 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 11: Apparatus - Fire Alone at a Flame Temperature of at Least 750 Degrees Celsius-First Edition |
|
IEC 60068-1 |
Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992 |
|
IEC 60840 |
Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV) Test methods and requirements-Third Edition |
|
IEC 60287-1-1 |
Electric cables – Calculation of the current rating – Part 1-1: Current rating equations (100 % load factor) and calculation of losses – General-Edition 2.0 |
|
IEC 60068-2-27 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ea and Guidance: Shock-Third Edition |
|
IEC 60502-4 |
Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) – Part 4: Test requirements on accessories for cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)-Edition 2 |
|
IEC 60332-3-10 |
Tests on Electric Cables Under Fire Conditions - Part 3-10: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Apparatus-First Edition; Supersedes IEC 60332-3:1992 |
|
IEC 60227-2 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 2: Test Methods-Edition 2.1; Edition 2: 1997 Consolidated with Amendment 1: 2003 |
|
IEC 60068-2-2 |
Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat-Fourth Edition; Supplement A-1976; Amendment 1-1993; Amendment 2-1994 |
|
IEC 60331-21 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 21: Procedures and Requirements - Cables of Rated Voltage up to and Including 0,6/1,0 kV-First Edition |
|
IEC 60332-1-2 |
Tests on electric and optical fibre cables under fire conditions Part 1-2: Test for vertical flame propagation for a single insulated wire or cable Procedure for 1 kW pre-mixed flame-First Edition; Replaces IEC 60332-1:1993 |
|
IEC 60245-1 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 1: General Requirements-Fourth Edition |
|
IEC 60255-3 |
Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time-Second Edition; Corrigendum 1: 09-1992 |
|
IEC 60068-2-30 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)-Third Edition |
|
IEC 60227-3 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 3: Non-Sheathed Cables for Fixed Wiring-Edition 2.1 |
|
IEC 60332-3-22 |
Tests on Electric Cables Under Fire Conditions - Part 3-22: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Category A-First Edition |
|
IEC 60287-1-2 |
Electric Cables - Calculation of the Current Rating - Part 1: Current Rating Equations (100% Load Factor) and Calculation of Losses - Section 2: Sheath Eddy Current Loss Factors for Two Circuits in Flat Formation-First Edition |
|
IEC 60068-2-32 |
Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall-Second Edition; Incorporating Amendment 1; Amendment 2: 10-1990 |
|
IEC 60287-3-2 |
Electric Cables - Calculation of the Current Rating - Part 3: Sections on Operating Conditions - Section 2: Economic Optimization of Power Cable Size-First Edition; Amendment 1-1996; Supersedes IEC 61059: 1991 |
|
IEC 60227-5 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 5: Flexible Cables (Cords)-Edition 2.2; Edition 2: Consolidated with Amendments 1:1997 and 2:2003 |
|
IEC 60068-2-14 |
Basic Environmental Testing Procedures Part 2: Tests Test N: Change of Temperature-Fifth Edition; Amendment 1: 4-1986 |
|
IEC 60068-2-64 |
Environmental Testing Part 2: Test Methods Test Fh: Vibration, Broad-Band Random (Digital Control) and Guidance-First Edition; Corrigendum 1:10/1993 |
|
IEC 60332-3-21 |
Tests on Electric Cables Under Fire Conditions - Part 3-21: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Category A F/R-First Edition |
|
IEC 60754-1 |
Test on Gases Evolved During Combustion of Materials from Cables - Part 1: Determination of the Amount of Halogen Acid Gas-Second Edition |
|
IEC 60227-4 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 4: Sheathed Cables for Fixed Wiring-Edition 2.1; Edition 2: 1992 Consolidated with Amendment 1: 1997 |
|
IEC 60332-3-23 |
Tests on Electric Cables Under Fire Conditions - Part 3-23: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Category B-First Edition |
|
IEC 60255-5 |
Electrical Relays - Part 5: Insulation Coordination for Measuring Relays and Protection Equipment - Requirements and Tests-Second Edition |
|
IEC 60811-1-1 |
Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 1-1: Methods for General Application - Measurement of Thickness and Overall Dimensions - Tests for Determining the Mechanical Properties-Edition 2.1; Edition 2:1993 Consolidated with Amendment 1:2001 |
|
IEC 60287-2-1 |
Electric Cables - Calculation of the Current Rating - Part 2-1: Thermal Resistance - Calculation of Thermal Resistance-Edition 1.2; Consolidated Reprint |
|
IEC 60332-3-24 |
Tests on Electric Cables Under Fire Conditions - Part 3-24: Test for Vertical Flame Spread of Vertically-Mounted Bunched Wires or Cables - Category C-First Edition |
|
IEC 60068-2-1 |
Environmental testing – Part 2-1: Tests – Test A: Cold-Edition 6.0 |
|
IEC 60794-1-2 |
Optical fibre cables Part 1-2: Generic specification Basic optical cable test procedures-Second Edition |
|
IEC 60331-12 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 12: Apparatus - Fire with Shock at a Temperature of at Least 830 Degrees C-First Edition |
|
IEC 60811-2-1 |
Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 2-1: Methods Specific to Elastomeric Compounds - Ozone Resistance, Hot Set and Mineral Oil Immersion Tests-Edition 2.1; Edition 2: 1998 Consolidated with Amendment 1: 2001 |
|
IEC 60332-1-3 |
Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable Procedure for determination of flaming droplets/particles-First Edition |
|
IEC 60826 |
Design criteria of overhead transmission lines-Third Edition |
|
IEC 60332-3-25 |
Tests on Electric Cables Under Fire Conditions - Part 3-25: Test for Vertical Flame Spread of Vertically - Mounted Bunched Wires or Cables - Category D-First Edition |
|
IEC 61810-1 |
Electromechanical elementary relays – Part 1: General and safety requirements-Second Edition; Supersedes IEC 61810-5: 1998; Incorporated Corrigendum 1: 10/2004 |
|
IEC 60331-25 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 25: Procedures and Requirements - Optical Fibre Cables-First Edition |
|
IEC 60227-7 |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 7: Flexible cables screened and unscreened with two or more conductors-Edition 1.1; Edition 1: 1995 Consolidated with Amendment 1: 2003 |
|
IEC 60287-3-1 |
Electric Cables - Calculation of the Current Rating - Part 3-1: Sections on Operating Conditions - Reference Operating Conditions and Selection of Cable Type-Edition 1.1; Edition 1: 1995 Consolidated with Amendment 1: 1999 |
|
IEC 60794-1-1 |
Optical Fibre Cables - Part 1-1: Generic Specification - General-Second Edition |
|
IEC 60287-2-2 |
Electric Cables - Calculation of the Current Rating - Part 2: Thermal Resistance - Section 2: A Method for Calculating Reduction Factors for Groups of Cables in Free Air, Protected from Solar Radiation-First Edition; Replaces IEC 1042 |
|
IEC 60255-8 |
Electrical relays - Part 8: Thermal electrical relays-Second Edition |
|
IEC 60183 |
Guide to the Selection of High-Voltage Cables-Second Edition; Amendment 1-1990 |
|
IEC 60331-31 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 31: Procedures and Requirements for Fire with Shock - Cables of Rated Voltage uo to and Inculding 0,6/1 kV-First Edition |
|
IEC 60885-3 |
Electrical Test Methods for Electric Cables Part 3: Test Methods for Partial Discharge Measurements on Lengths of Extruded Power Cable First Edition-First Edition |
|
IEC 60287-1-3 |
Electric Cables - Calculation of the Current Rating - Part 1-3: Current Rating Equations (100% Load Factor) and Calculation of Losses - Current Sharing between Parallel Single-Core Cables and Calculation of Circulating Current Losses-First Edition |
|
IEC 60332-2-1 |
Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable Apparatus-First Edition |
|
IEC 60754-2 |
Test on Gases Evolved During Combustion of Electric Cables; Part 2: Determination of Degree of Acidity of Gases Evolved During the Combustion of Materials Taken from Electric Cables by Measuring pH and Conductivity-First Edition; Amendment 1-1997 |
|
IEC 60331-23 |
Tests for Electric Cables under Fire Conditions - Circuit Integrity - Part 23: Procedures and Requirements - Electric Data Cables-First Edition |
|
IEC 60332-2-2 |
Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable Procedure for diffusion flame-First Edition; Replaces IEC 60332-2:1989 |
|
IEC 60245-4 |
Rubber insulated cables Rated voltages up to and including 450/750 V Part 4: Cords and flexibe cables-Edition 2.2; Consolidated with amendments 1:1997 and 2:2003 |
|
IEC 60811-1-2 |
Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Two - Thermal Ageing Methods-First Edition; Corrigendum: 05/1986; Amendment 1: 10/1989; Amendment 2: 07/2000 |
|
IEC 60885-1 |
Electrical test methods for electric cables Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V-First Edition |
|
IEC 61936-1 |
Power installations exceeding 1 kV a.c. Part 1: Common rules-First Edition |
|
IEC 60304 |
Standard Colours for Insulation for Low-Frequency Cables and Wires-Edition 3 |
|
IEC 60384-1 |
Fixed Capacitors for Use in Electronic Equipment - Part 1: Generic Specification-Third Edition; IECQ QC 300000 |
|
IEC 60255-6 |
Electrical relays - Part 6: Measuring relays and protection equipment-Second Edition |
|
IEC 60885-2 |
Electrical test methods for electric cables Part 2: Partial discharge tests-First Edition |
|
IEC 60255-13 |
Electrical Relays Part 13: Biased (Percentage) Differential Relays-First Edition |
|
IEC 60245-2 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 2: Test Methods-Edition 2.2; Edition 2: 1994 Consolidated with Amendments 1: 1997 and 2: 1997 |
|
IEC 60255-16 |
Electrical relays - Part 16: Impedance measuring relays-First Edition |
|
IEC 60793-1-1 |
Optical fibres Part 1-1: Measurement methods and test procedures General and guidance-Second Edition |
|
IEC 60245-3 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 3: Heat Resistant Silicone Insulated Cables-Second Edition; Amendment 1-1997 |
|
IEC 60068-2-47 |
Environmental testing – Part 2-47: Tests – Mounting of specimens for vibration, impact and similar dynamic tests-Edition 3 |
|
IEC 60227-6 |
Polyvinyl Chloride Insulated Cables of Rated Voltages up to and Including 450/750 V - Part 6: Lift Cables and Cables for Flexible Connections-Third Edition |
|
IEC 62067 |
Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV) – Test methods and requirements-Edition 1.1 * Consolidated Reprint |
|
IEC 60255-12 |
Electrical Relays Part 12: Directional Relays and Power Relays with Two Input Energizing Quantities-First Edition |
|
IEC 60255-21-2 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests-First Edition |
|
IEC 60068-2-29 |
Basic Environmental Testing Procedures Part 2: Tests - Tests Eb and Guidance: Bump-Second Edition |
|
IEC 60255-11 |
Electrical relays - Part 11: Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays-First Edition |
|
IEC 61196-1 |
Coaxial Communication Cables - Part 1: Generic Specification - General, Definitions, Requirements-Edition 2.0 |
|
IEC 60255-22-1 |
Electrical relays – Part 22-1: Electrical disturbance tests for measuring relays and protection equipment – 1 MHz burst immunity tests-Edition 2 |
|
IEC 60255-22-3 |
Electrical Relays - Part 22-3: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Radiated Electromagnetic Field Disturbance Tests-Second Edition |
|
IEC 61051-2 |
Varistors for use in electronic equipment - Part 2: Sectional specification for surge suppression varistors-First Edition; |
|
IEC 60255-21-1 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)-First Edition |
|
IEC 60794-3 |
Optical Fibre Cables - Part 3: Duct, Buried and Aerial Cables - Sectional Specification-Third Edition |
|
IEC 60255-26 |
Electrical relays Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment-First Edition |
|
IEC 60811-1-4 |
Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 1: Methods for General Application Section Four - Tests at Low Temperature-First Edition; Corrigendum-05/1986; Amendment 1-1993; CENELEC EN 60811-1-4: 1995; Amendment 2:07-2001 |
|
IEC 61034-1 |
Measurement of Smoke Density of Cables Burning Under Defined Conditions - Part 1: Test Apparatus-Edition 3 |
|
IEC 60173 |
Colours of the Cores of Flexible Cables and Cords-First Edition |
|
IEC 60255-22-5 |
Electrical Relays - Part 22-5: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Surge Immunity Test-First Edition |
|
IEC 60811-1-3 |
Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 1-3: General Application - Section 3: Methods for Determining the Density - Water Absorption Tests - Shrinkage Test-Edition 2.1; Edition 2:1993 Consolidated with Amendment 1:2001 |
|
IEC 60255-22-2 |
Electrical Relays - Part 22: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Section 2: Electrostatic Discharge Tests-Second Edition |
|
IEC TS 62239 |
Process management for avionics Preparation of an electronic components management plan-First Edition |
|
IEC 60245-5 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 5: Lift Cables-Second Edition; Amendment 1 12-2003 |
|
IEC 60189-1 |
Low-frequency cables and wires with PVC insulation and PVC sheath – Part 1: General test and measuring methods-Edition 3.0 |
|
IEC 60230 |
Impulse Tests on Cables and Their Accessories-First Edition |
|
IEC 60068-2-31 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens-First Edition; Amendment 1: 10-1982 |
|
IEC 60245-6 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 6: Arc Welding Electrode Cables-Second Edition; Amendment 1-1997; Amendment 2-2003 |
|
IEC 61034-2 CORR 1 |
Measurement of Smoke Density of Cables Burning under Defined Conditions - Part 2: Test Procedure and Requirements CORRIGENDUM 1-Third Edition |
|
IEC 60245-7 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 7: Heat Resistant Ethylene-Vinyl Acetate Rubber Insulated Cables-First Edition; Amendment 1 05-1997 |
|
IEC 60255-24 |
Electrical Relays - Part 24: Common Format for Transient Data Exchange (COMTRADE) for Power Systems-First Edition |
|
IEC 60255-25 |
Electrial Relays - Part 25:Electromagnetic Emission Tests for Measuring Relays and Protection Equipment-First Edition |
|
IEC 60068-2-17 |
Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing-Fourth Edition |
|
IEC TR 60721-4-1 |
Classification of Environmental Conditions - Part 4-1: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Storage-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60229 |
Tests on Cable Oversheaths Which Have a Special Protective Function and Are Applied by Extrusion-Second Edition |
|
IEC 60245-8 |
Rubber Insulated Cables - Rated Voltages up to and Including 450/750 V - Part 8: Cords for Applications Requiring High Flexibility-Edition 1.1; Edition 1: 1998 Consolidated with Amendment 1: 2003 |
|
IEC 60721-2-1 |
Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature Temperature and humidity-Edition 1.1; Edition 1: 1982 Consolidated with Amendment 1: 1987 |
|
IEC 60939-1 CORR 1 |
Passive filter units for electromagnetic interference suppression – Part 1: Generic specification CORRIGENDUM 1-Second Edition |
|
IEC 60068-2-20 |
Basic Environmental Testing Procedures Part 2: Tests - Test T: Soldering-Fourth Edition; Amendment 2-1987 |
|
IEC 60384-14-1 |
Fixed capacitors for use in electronic equipment – Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains – Assessment level D-Second Edition; |
|
IEC 60738-1 |
Thermistors – Directly heated positive temperature coefficient – Part 1: Generic specification-Edition 3; Same as IECQ QC 440000 |
|
IEC 60255-22-4 |
Electrical Relays Part 22-4: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Electrical Fast Transient/Burst Immunity Test-Second Edition |
|
IEC 60794-4 |
Optical fibre cables Part 4: Sectional specification Aerial optical cables along electrical power lines-First Edition |
|
IEC 61051-1 |
Varistors for use in electronic equipment – Part 1: Generic specification-edition 2.0 |
|
IEC 60811-3-1 |
Common Test Methods for Insulating and Sheathing Materials of Electric and Optical Cables - Part 3-1: Methods Specific to PVC Compounds - Pressure Test At High Temperature - Tests for Resistance to Cracking-First Edition; Corrigendum:05-1986; Amendment:1-1994; Amendment 2:05-2001 |
|
IEC 60028 |
International standard of resistance for copper-Edition 2 |
|
IEC 60255-22-7 |
Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment Power frequency immunity tests-First Edition |
|
IEC 60255-22-6 |
Electrical Relays - Part 22-6: Electrical Disturbance Tests for Measuring Relays and Protection Equipment - Immunity to Conducted Disturbances Induced by Radio Frequency Fields-First Edition |
|
IEC 60721-1 |
Classification of environmental conditions Part 1: Environmental parameters and their severities-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1992 and 2: 1995 |
|
IEC 60724 |
Short-Circuit Temperature Limits of Electric Cables with Rated Voltages 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)-Third Edition |
|
IEC 60050-448 |
International Electrotechnical Vocabulary Chapter 448: Power System Protection-Second Edition |
|
IEC 60068-2-38 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test-First Edition |
|
IEC 61442 |
Test methods for accessories for power cables with rated voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)-Edition 2 |
|
IEC 60055-1 |
Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their Accessories-Edition 5.1; Consolidated Reprint |
|
IEC 60068-2-68 |
Environmental Testing - Part 2: Tests - Test L: Dust and Sand-First Edition |
|
IEC 61865 |
Overhead Lines - Calculation of the Electrical Component of Distance between Live Parts and Obstacles - Method of Calculation-First Edition |
|
IEC 60068-2-18 |
Environmental Testing Part 2-18: Tests - Test R and Guidance: Water-Second Edition |
|
IEC 60068-2-7 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, Steady State-Second Edition; Amendment 1: 06/1986 |
|
IEC 60141-1 |
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories - Part 1: Oil-Filled, Paper-Insulated, Metal Sheathed Cables and Accessories for Alternating Voltages up to and Including 400 kV-Third Edition; Amendment 1-1995; Amendment 2-1998 |
|
IEC 60068-2-11 |
Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt Mist-Third Edition; Corrigendum: December 1999 |
|
IEC 60949 |
Calculation of Thermally Permissible Short-Circuit Currents, Taking into Account Non-Adiabatic Heating Effects-First Edition |
|
IEC 60055-2 |
Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 2: General and Construction Requirements-First Edition; Amendment 1: 10-1989; Amendment 2: 02-2005 |
|
IEC 60652 |
Loading Tests on Overhead Line Structures-Second Edition |
|
IEC 60811-3-2 |
Common Test Methods for Insulating and Sheathing Materials of Electric Cables Part 3: Methods Specific to PVC Compounds Section Two - Loss of Mass Test - Thermal Stability Test-First Edition; Corrigendum:05/1986; Amendment 1:1993; Amendment 2: 12/2003 |
|
IEC 61238-1 |
Compression and mechanical connectors for power cables for rated voltages up to 30 kV (Um = 36 kV) Part 1: Test methods and requirements-Second Edition |
|
IEC 61284 |
Overhead Lines - Requirements and Tests for Fittings-Second Edition; Corrigendum-1998 |
|
IEC 60189-2 |
Low-frequency cables and wires with PVC insulation and PVC sheath – Part 2: Cables in pairs, triples, quads and quintuples for inside installations-Edition 4.0 |
|
IEC 60721-3-0 |
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction-Edition 1.1; Edition 1: 1984 Consolidated with Amendment 1: 1987 |
|
IEC 60793-2 |
Optical fibres Part 2: Product specifications General-Fifth Edition |
|
IEC 60793-2-50 |
Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres-Second Edition |
|
IEC 61810-2 |
Electromechanical elementary relays Part 2: Reliability-First Edition; Replaces IEC 60255-14: 1981, IEC 60255-15:1981 IEC 60255-23: 1994 |
|
IEC 61810-7 |
Electromechanical elementary relays – Part 7: Test and measurement procedures-Edition 2 |
|
IEC TR 62095 |
Electric cables Calculations for current ratings Finite element method-First Edition |
|
IEC 60068-2-5 |
Basic Environmental Testing Procedures Part 2: Tests Test Sa: Simulated Solar Radiation at Ground Level-First Edition |
|
IEC 60068-2-52 |
Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution)-Second Edition; Corrigendum 1: 07/1996 |
|
IEC 60793-1-40 |
Optical Fibres - Part 1-40: Measurement and Test Procedures - Attenuation-First Edition |
|
IEC 61300-2-4 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention-First Edition |
|
IEC 60702-1 |
Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 1: Cables-Third Edition |
|
IEC 60793-2-10 |
Optical fibres – Part 2-10: Product specifications – Sectional specification for category A1 multimode fibres-Edition 3.0 |
|
IEC 60794-3-10 |
Optical Fibre Cables - Part 3-10: Outdoor Cables - Family Specification for Duct and Directly Buried Optical Telecommunication Cables-First Edition |
|
IEC 60889 |
Hard-Drawn Aluminium Wire for Overhead Line Conductors-First Edition |
|
IEC 60068-2-9 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance for Solar Radiation Testing-First Edition; Amendment 1:1984; Corrigendum 1:08/1989 |
|
IEC 60721-3-6 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment-First Edition; Corrigendum 1: 9/1987; Amendment 1: 6/1991; Amendment 2: 11/1996 |
|
IEC 60811-4-2 |
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 4-2: Methods specific to polyethylene and polypropylene compounds –Tensile strength and elongation at break after conditioning at elevated temperature – Wrapping test after conditioning at elevated temperature – Wrapping test after thermal ageing in air – Measurement of mass increase – Long-term stabil-Second Edition |
|
IEC 60986 |
Short-Circuit Temperature Limits of Electric Cables with Rated Voltages from 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)-Second Edition |
|
IEC 60068-2-10 |
Environmental testing – Part 2-10: Tests – Test J and guidance: Mould growth-Edition 6 |
|
IEC 60189-3 |
Low-frequency cables and wires with PVC insulation and PVC sheath – Part 3: Equipment wires with solid or stranded conductor wires, PVC insulated, in singles, pairs and triples-Edition 4.0 |
|
IEC 60811-4-1 |
Common test methods for Insulating and sheathing materials of electric and optical cables Part 4-1: Methods specific to polyethylene and polypropylene compounds – Resistance to environmental stress cracking – Measurement of the melt flow index – Carbon black and/or mineral filler content measurement in polyethylene by direct combustion – Measurement of carbon black content by thermogravi-Second Edition |
|
IEC 60853-1 |
Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36) kV-First Edition; Amendment 1: 09/1994 |
|
IEC 61156-1 |
Multicore and symmetrical pair/quad cables for digital communications – Part 1: Generic specification-Edition 3.0 |
|
IEC 60068-2-60 |
Environmental Testing - Part 2: Tests - Test Ke: Flowing Mixed Gas Corrosion Test-Second Edition |
|
IEC 60811-5-1 |
Insulating and sheathing materials of electric and optical cables Common test methods Part 5-1: Methods specific to filling compounds Drop-point Separation of oil Lower temperature brittleness Total acid number Absence of corrosive components Permittivity at 23 °C DC resistivity at 23 °C and 100 °C-Edition 1.1; Edition 1:1990 Consolidated with Amendment 1:2003 |
|
IEC TR 60721-4-2 |
Classification of environmental conditions Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TR 60721-4-6 |
Classification of Environmental Conditions - Part 4-6: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ship Environment-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60096-2 |
Radio-Frequency Cables Part 2: Relevant Cable Specifications-First Edition; Consolidated Reprint Consisting of Publication 96-2 and Supplements 96-2A: 1965, 96-2B: 1966, 96-2C: 1976, 96-2D: 1986; Amendment 1-1990; Corrigendum-04 1993; Corrigendum |
|
IEC 60141-4 |
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 4: Oil-Impregnated Paper-Insulated High Pressure Oil-Filled Pipe-Type Cables and Accessories for Alternating Voltages up to and Including 400 kV-First Edition; Amendment 1: 10-1990 |
|
IEC 60721-3-3 |
Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations-Edition 2.2; Edition 2: 1994 Consolidated with Amendments 1: 1995 and 2: 1996 |
|
IEC 60794-2-20 |
Optical fibre cables Part 2-20: Indoor cables Family specification for multi-fibre optical distribution cables |
|
IEC 60800 |
Heating Cables with a Rated Voltage of 300/500 V for Comfort Heating and Prevention of Ice Formation Second Edition-Bilingual; Second Edition |
|
IEC 60853-2 |
Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages-First Edition |
|
IEC 60874-1 |
Connectors for optical fibres and cables – Part 1: Generic specification-Edition 5; Same As IECQ QC 910000 |
|
IEC 60874-1-1 |
Connectors for optical fibres and cables – Part 1-1: Blank detail specification-Edition 2; Same as IECQ QC 910001-910006 & QC 910099 |
|
IEC 60068-2-33 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests-First Edition; Amendment 1-1978 |
|
IEC 60721-3-4 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 4: Stationary Use at Non-Weatherprotected Locations-Second Edition; Amendment 1: 11/1996 |
|
IEC 60793-1-20 |
Optical Fibres - Part 1-20: Measurement Methods and Test Procedures - Fibre Geometry-First Edition; Together with the Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces the First Edition of IEC 60793-1-2 |
|
IEC 60068-2-78 |
Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab: Damp Heat, Steady State-First Edition; Replaces IEC 60068-2-3 and 60068-2-56 |
|
IEC 60141-2 |
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 2: Internal Gas- Pressure Cables and Accessories for Alternating Voltages up to 275 kV-First Edition; Amendment 1: 05-1967 |
|
IEC 60384-14-2 |
Fixed capacitors for use in electronic equipment Part 14-2: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests only-First Edition |
|
IEC 60384-14-3 |
Fixed capacitors for use in electronic equipment Part 14-3: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Assessment level DZ-First Edition |
|
IEC 61280-1-1 |
Fibre Optic Communication Subsystem Basic Test Procedures - Part 1-1: Test Procedures for General Communication Subsystems - Transmitter Output Optical Power Measurement for Single-Mode Optical Fibre Cable-First Edition |
|
IEC 61280-2-9 |
Fibre optic communication subsystem test procedures Part 2-9: Digital systems Optical signal-to-noise ratio measurement for dense wavelength-division multiplexed systems-First Edition |
|
IEC 60096-0-1 |
Radio-Frequency Cables - Part 0: Guide to the Design of Detail Specifications Section 1 - Coaxial Cables-Edition 2.1; Edition 2: 1990 Consolidated with Amendment 1:2000 |
|
IEC 60255-27 CORR |
Measuring relays and protection equipment Part 27: Product safety requirements-Edition 1.0 |
|
IEC 60794-2-10 |
Optical fibre cables Part 2-10: Indoor cables Family specification for simplex and duplex cables-First Edition |
|
IEC TR 61597 |
Overhead Electrical Conductors - Calculation Methods for Stranded Bare Conductors-Edition 1 |
|
IEC 60068-3-3 |
Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments-First Edition |
|
IEC 60721-2-2 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Precipitation and Wind-First Edition |
|
IEC 60888 |
Zinc-Coated Steel Wires for Stranded Conductors-First Edition |
|
IEC 61300-2-6 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism-First Edition |
|
IEC 62148-6 |
Fibre optic active components and devices Package and interface standards Part 6: ATM-PON transceivers-First Edition |
|
IEC 60794-2-40 CORR 1 |
Optical fibre cables – Part 2-40: Indoor cables – Family specification for simplex and duplex cables with buffered A4 fibres CORRIGENDUM 1-First Edition |
|
IEC 60853-3 |
Calculation of the Cyclic and Emergency Current Rating of Cables Part 3: Cyclic Rating Factor for Cables of all Voltages, with Partial Drying of the Soil-First Edition |
|
IEC 61196-2 |
Radio-Frequency Cables - Part 2: Sectional Specification for Semi-Rigid Radio- Frequency and Coaxial Cables with Polytetrafluoroethylene (PTFE) Insulation-Second Edition |
|
IEC 61897 |
Overhead Lines - Requirements and Tests for Stockbridge Type Aeolian Vibration Dampers-First Edition |
|
IEC 62150-2 |
Fibre optic active components and devices Test and measurement procedures Part 2: ATM-PON transceivers-First Edition |
|
IEC TR 60721-4-5 |
Classification of Environmental Conditions - Part 4-5: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ground Vehicle Installations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-57 |
Environmental Testing - Part 2-57: Test - Test Ff: Vibration - Time-History Method-Second Edition |
|
IEC 60104 |
Aluminium-Magnesium-Silicon Alloy Wire for Overhead Line Conductors-Edition 2 |
|
IEC 60141-3 |
Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 3: External Gas- Pressure (Gas Compression) Cables and Accessories for Alternating Voltages up to 275 kV-First Edition; Amendment 1: 05-1967 |
|
IEC 60702-2 |
Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 2: Terminations-Second Edition |
|
IEC 60721-3-2 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 2: Transportation-Second Edition |
|
IEC 60794-3-30 |
Optical fibre cables Part 3-30: Outdoor cables Family specification for optical telecommunication cables for lake and river crossings-First Edition |
|
IEC 60939-2 CORR 1 |
Passive filter units for electromagnetic interference suppression – Part 2: Sectional specification – Passive filter units for which safety tests are appropriate – Test methods and general requirements CORRIGENDUM 1-Second Edition |
|
IEC 61280-2-2 |
Fibre Optic Communication Subsystem Test Procedures - Part 2-2: Digital systems – Optical eye pattern, waveform and extinction ratio measurement-Edition 2 |
|
IEC 61300-3-31 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-31: Examinations and measurements Coupled power ratio measurement for fibre optic sources-First Edition |
|
IEC 61300-3-6 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-6: Examinations and measurements Return loss-Second Edition |
|
IEC TR 60721-4-7 |
Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-13 |
Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure-Fourth Edition |
|
IEC 60068-2-74 |
Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination-First Edition |
|
IEC 60874-14-1 |
Connectors for Optical Fibres and Cables - Part 14-1: Detail Specification for Fibre Optic Connector Type SC-PC Standard Terminated to Multimode Fibre Type A1a, A1b-First Edition; QC 910004XX0001 |
|
IEC 61280-1-3 |
Fibre Optic Communication Subsystem Basic Test Procedures - Part 1-3: Test Procedures for General Communication Subsystems - Central Wavelength and Spectral Width Measurement-First Edition |
|
IEC 61773 |
Overhead Lines - Testing of Foundations for Structures-First Edition; Corrigendum-March 1997 |
|
IEC 62246-1 |
Reed Contract Units - Part 1: Generic Specification-First Edition; Replaces IEC 60255-9 |
|
IEC TR 60344 |
Calculation of d.c. resistance of plain and coated copper conductors of low-frequency cables and wires – Application guide-Edition 3 |
|
IEC TR 60721-4-4 |
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60738-1-1 |
Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-1: Blank Detail Specification - Current Limitimg Application - Assessment Level EZ-Second Edition; IECQ QC 440001 |
|
IEC 61812-1 |
Specified Time Relays for Industrial Use - Part 1: Requirements and Tests-First Edition |
|
IEC TR 60721-4-0 |
Classification of Environmental Conditions - Part 4-0: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Introduction-First Edition |
|
IEC TR 60721-4-3 |
Classification of environmental conditions Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TR 61917 |
Cables, Cable Assemblies and Connectors - Introduction to Electromagnetic (EMC) Screening Measurements-First Edition |
|
IEC 60384-4 CORR 1 |
Fixed capacitors for use in electronic equipment – Part 4: Sectional specification – Aluminium electrolytic capacitors with solid (MnO2) and nonsolid electrolyte CORRIGENDUM 1-Edition 4.0 |
|
IEC 60404-8-3 |
Magnetic materials – Part 8-3: Specifications for individual materials – Cold-rolled electrical non-alloyed and alloyed steel sheet and strip delivered in the semi-processed state-Edition 3; Supersedes IEC 60404-8-2:1998 |
|
IEC 60794-3-20 |
Optical Fibre Cables - Part 3-20: Outdoor Cables - Family Specification for Optical Self-Supporting Aerial Telecommunication Cables-First Edition |
|
IEC 61280-4-2 |
Fibre Optic Communication Subsystem Basic Test Procedures - Part 4-2: Fibre Optic Cable Plant - Single-Mode Fibre Optic Cable Plant Attenuation-First Edition |
|
IEC 61300-1 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 1: General and Guidance-Second Edition |
|
IEC 62219 |
Overhead Electrical Conductors - Formed Wire, Concentric Lay, Stranded Conductors-First Edition |
|
IEC 60068-2-65 |
Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration, Acoustically Induced-First Edition |
|
IEC 60793-1-46 |
Optical Fibres - Part 1-46: Mesurement Methods and Test Procedures - Monitoring of Changes in Optical Transmittance-First Edition |
|
IEC 61138 |
Cables for Portable Earthing and Short-Circuiting Equipment-Second Edition; Amendment 1: 04/1995 |
|
IEC 61300-2-1 CORR 1 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-1: Tests - Vibration (sinusoidal) CORRIGENDUM 1-Second Edition |
|
IEC 61300-2-21 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-21: Tests - Composite temperature-humidity cyclic test-First Edition |
|
IEC 61300-3-14 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-14: Examinations and measurements – Accuracy and repeatability of the attenuation settings of a variable attenuator-Edition 2 |
|
IEC 61443 |
Short-Circuit Temperature Limits of Electric Cables with Rated Voltages Above 30 kV (Um = 36 kV)-First Edition |
|
IEC 61854 |
Overhead Lines - Requirements and Tests for Spacers-First Edition |
|
IEC 61935-1 |
Testing of balanced communication cabling in accordance with ISO/IEC 11801 – Part 1: Installed cabling-Edition 2 |
|
IEC 60068-2-80 |
Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode-Edition 1 |
|
IEC 60096-3 |
Radio-Frequency Cables Part 3: General Requirements and Tests for Single-Unit Coaxial Cables for Use in Cabled Distribution Systems-First Edition |
|
IEC 60721-2-4 |
Classification of environmental conditions Part 2-4: Environmental conditions appearing in nature Solar radiation and temperature-Edition 1.1; Edition 1: 1987 Consolidated with Amendment 1: 1988 |
|
IEC 60721-3-1 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 1: Storage-Second Edition |
|
IEC 60721-3-5 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 5: Ground Vehicle Installations-Second Edition |
|
IEC 60794-2-11 |
Optical fibre cables Part 2-11: Indoor cables Detailed specification for simplex and duplex cables for use in premises cabling-First Edition |
|
IEC 61051-2-2 |
Varistors for use in electronic equipment - Part 2: Blank detail specification for zinc oxide surge suppression varistors. Assessment level E-First Edition; |
|
IEC 61280-1-4 |
Fibre Optic Communication Subsystem Test Procedures - Part 1-4: General Communication Subsystems - Collection and Reduction of Two-Dimensional Nearfield Data for Multimode Fibre Laser Transmitters-First Edition |
|
IEC 61395 |
Overhead Electrical Conductors - Creep Test Procedures for Stranded Conductors |
|
IEC TS 61394 |
Overhead Lines - Characteristics of Greases for Aluminium, Aluminium Alloy and Steel Bare Conductors-First Edition |
|
IEC 60404-8-1 |
Magnetic Materials Part 8-1: Specifications for Individual Materials - Magnetically Hard Materials-Edition 2.1; Edition 2:2001 consolidated with amendment 1:2004 |
|
IEC 60738-1-4 |
Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-4: Blank Detail Specification - Sensing Application - Assessment Level EZ-First Edition; IECQ QC 440004 |
|
IEC 60940 |
Guidance Information on the Application of Capacitors, Resistors, Inductors, and Complete Filter Units for Radio Interference Suppression-First Edition; Corrigendum-1998 |
|
IEC 61196-4 |
Coaxial communication cables Part 4: Sectional specification for radiating cables-Second Edition |
|
IEC 62148-2 CORR 1 |
Fibre optic active components and devices – Package and interface standards – Part 2: SFF MT-RJ 10-pin transceivers CORRIGENDUM 1-First Edition |
|
IEC 62149-1 CORR 1 |
Fibre optic active components and devices – Performance standards – Part 1: General and guidance CORRIGENDUM 1-First Edition |
|
IEC 62149-4 CORR 1 |
Fibre optic active components and devices – Performance standards – Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application CORRIGENDUM 1-First Edition |
|
IEC PAS 60794-2-50 |
Optical fibre cables Part 2-50: Indoor optical fibre cables Family specification for simplex and duplex cables for use in patch cords-First Edition |
|
IEC 60068-2-55 |
Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce-First Edition |
|
IEC 60721-2-8 |
Classification of Environmental Conditions - Part 2: Environmental Conditions Appearing in Nature - Section 8: Fire Exposure-First Edition |
|
IEC 60793-1-22 |
Optical Fibres - Part 1-22: Measurement Methods and Test Procedures - Length Measurement-First Edition; Together with the Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces the First Edition of IEC 60793-1-2 |
|
IEC 61300-3-4 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-4: Examination and Measurements - Attenuation-Second Edition |
|
IEC 62149-5 |
Fibre optic active components and devices Performance standards Part 5: ATM-PON transceivers with LD driver and CDR ICs-First Edition |
|
IEC PAS 61280-2-10 |
Fibre Optic Communication Subsystem Test Procedures - Part 2-10: Digital Systems - Time-Resolved Chirp and Alpha-Factor Measurement of Laser Transmitters-Edition 1.0 |
|
IEC TS 61774 |
Overhead lines - Meteorological Data for Assessing Climatic Loads-First Edition |
|
IEC 60068-2-59 |
Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine-Beat Method-First Edition |
|
IEC 60068-2-61 |
Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence-First Edition |
|
IEC 60068-2-77 |
Environmental Testing - Part 2-77: Tests - Test 77: Body Strength and Impact Shock-First Edition |
|
IEC 60068-2-81 |
Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis-First Edition |
|
IEC 60404-2 |
Magnetic Materials Part 2: Methods of Measurement of Magnetic Properties of Electrical Steel Sheet and Strip by Means of an Epstein Frame-Third Edition |
|
IEC 60721-2-3 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Air Pressure-First Edition |
|
IEC 60738-1-2 |
Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-2: Blank Detail Specification - Heating Element Application - Assessment Level EZ-First Edition; IECQ QC 440002 |
|
IEC 60793-1-21 |
Optical Fibres - Part 1-21: Measurement Methods and Test Procedures - Coating Geometry-First Edition; Together with the Other Standards in the IEC 60793-1-2X Series, Cancels and Replaces the First Edition of IEC 60793-1-2 |
|
IEC 60793-2-30 |
Optical Fibres - Part 2-30: Product Specifications - Sectional Specification for Category A3 Multmode Fibres-First Edition |
|
IEC 60794-2-21 |
Optical fibre cables – Part 2-21: Indoor cables – Detailed specification for multi-fibre optical distribution cables for use in premises cabling-Edition 1 |
|
IEC 60874-14-3 |
Connectors for Optical Fibres and Cables - Part 14-3: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Single-Mode Fibre-First Edition; QC 910004XX0003 |
|
IEC 61290-3-1 |
Optical amplifiers Test methods Part 3-1: Noise figure parameters Optical spectrum analyzer method-First Edition |
|
IEC 61746 |
Calibration of optical time-domain reflectometers (OTDRs)-Second Edition |
|
IEC 62012-1 |
Multicore and symmetrical pair/quad cables for digital communications to be used in harsh environments Part 1: Generic specification-First Edition |
|
IEC TS 61423-2 |
Heating Cables for Industrial Applications - Part 2: Constructional and Material Requirements-Edition 1 |
|
IEC TS 62100 |
Cables for aeronautical ground lighting primary circuits-First Edition |
|
IEC 60068-2-53 |
Basic Environmental Testing Procedures Part 2: Tests Guidance to Tests Z/AFc and Z/BFc: Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests-First Edition |
|
IEC 60068-2-67 |
Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for Components-First Edition |
|
IEC 60404-1-1 |
Magnetic materials Part 1-1: Classification Surface insulations of electrical steel sheet, strip and laminations-First Edition |
|
IEC 60721-2-5 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 5: Dust, Sand, Salt Mist-First Edition |
|
IEC 60721-3-7 |
Classification of Environmental Conditions - Part 3-7: Classification of Groups of Environmental Parameters and Their Severities - Portable and Non-Stationary Use-Edition 2.1; Edition 2:1995 Consolidated with Amendment 1:1996 |
|
IEC 60793-1-30 |
Optical Fibres - Part 1-30: Measurement Methods and Test Procedures - Fibre Proof Test-First Edition |
|
IEC 60793-2-20 |
Optical Fibres - Part 2-20: Product Specifications - Sectional Specification for Category A2 Multmode Fibres-First Edition |
|
IEC 60794-2-31 |
Optical fibre cables Part 2-31: Indoor cables Detailed specification for optical fibre ribbon cables for use in premises cabling-Edition 1 |
|
IEC 60794-3-12 |
Optical fibre cables Part 3-12: Outdoor cables - Detailed specification for duct and directly buried optical telecommunication cables for use in premises cabling-First Edition |
|
IEC 60874-14-6 |
Connectors for Optical Fibres and Cables - Part 14-6: Detail Specification for Fibre Optic Connector Type SC-APC 9 Degrees Untuned Terminated to Single-Mode Fibre Type B1-First Edition; QC 910004XX0006 |
|
IEC 60939-2-2 |
Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (safety tests only)-First Edition |
|
IEC 61196-3-1 |
Radio-Frequency Cables - Part 3: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Section 1: Detail Specification for Cables of 500 m Reach and up to 10 Mb/s-First Edition |
|
IEC 61280-2-8 |
Fibre optic communication subsystem test procedures Digital systems Part 2-8: Determination of low BER using Q-factor measurements-First Edition |
|
IEC 61300-3-11 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-11: Examinations and measurements - Engagement and separation forces-First Edition |
|
IEC 61754-20 |
Fibre Optic Connector Interfaces - Part 20: Type LC Connector Family-First Edition |
|
IEC 61811-1 |
Electromechanical Non-Specified Time All-Or-Nothing Relays of Assesed Quality - Part 1: Generic Specification-First Edition; IECQ QC 160000 |
|
IEC TR 61282-1 |
Fibre Optic Communication System Design Guides - Part 1: Single-Mode Digital and Analogue Systems-Edition 1 |
|
IEC TS 61423-1 |
Heating Cables for Industrial Applications - Part 1: Performance Requirements and Test Methods-Edition 1 |
|
IEC 60063 |
Preferred Number Series for Resistors and Capacitors-Edition 2 |
|
IEC 60068-2-45 |
Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents-First Edition; Erratum 1: 08/1981: Amendment 1: 02-1993 |
|
IEC 60068-2-66 |
Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)-First Edition |
|
IEC 60068-2-70 |
Environmental Testing - Part 2: Tests - Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and Hands-First Edition |
|
IEC 60121 |
Recommendation for Commercial Annealed Aluminium Electrical Conductor Wire-Edition 1 |
|
IEC 60169-2 |
Radio-Frequency Connectors Part 2: Coaxial Unmatched Connector-First Edition; Amendment 1: 7/1982 |