|
IEC 60079-0 |
Electrical Apparatus for Explosive Gas Atmospheres - Part 0: General Requirements-Fourth Edition |
|
IEC 60079-15 |
Electrical apparatus for explosive gas atmospheres – Part 15: Construction, test and marking of type of protection |
|
IEC 60079-10 |
Electrical Apparatus for Explosive Gas Atmospheres Part - 10: Classification of Hazardous Areas-Fourth Edition |
|
IEC 60079-14 |
Electrical Apparatus for Explosive Gas Atmospheres - Part 14: Electrical Installations in Hazardous Areas (Other Than Mines)-Third Edition |
|
IEC 60079-1 |
Explosive atmospheres – Part 1: Equipment protection by flameproof enclosures “dâ€-Edition 6.0 |
|
IEC 60364-1 |
Low-voltage electrical installations – Part 1: Fundamental principles, assessment of general characteristics, definitions-Fifth Edition |
|
IEC CISPR 22 |
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement-Edition 5.2; Consolidated Reprint |
|
IEC 60079-11 CORR 1 |
Explosive atmospheres – Part 11: Equipment protection by intrinsic safety |
|
IEC 61558-1 |
Safety of power transformers, power supplies, reactors and similar products - Part 1: General requirements and tests-Second Edition |
|
IEC 60079-7 |
Explosive atmospheres – Part 7: Equipment protection by increased safety |
|
IEC 60364-4-41 |
Low-voltage electrical installations – Part 4-41: Protection for safety – Protection against electric shock-Edition 5.0 |
|
IEC 60068-2-6 |
Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal)-Sixth Edition; Corrigendum 1: 03/1995 |
|
IEC 60812 |
Analysis techniques for system reliability – Procedure for failure mode and effects analysis (FMEA)-Edition 2 |
|
IEC 60364-5-52 |
Electrical Installations of Buildings - Part 5-52: Selection and Erection of Electrical Equipment - Wiring Systems-Second Edition; Compiled from and Replaces IEC 60364-5-523(1999) |
|
IEC 60079-17 |
Electrical Apparatus for Explosive Gas Atmospheres - Part 17: Inspection and Maintenance of Electrical Installations in Hazardous Areas (Other Than Mines)-Third Edition |
|
IEC 60079-2 |
Explosive atmospheres – Part 2: Equipment protection by pressurized enclosure «p»-Edition 5.0 |
|
IEC TS 60479-1 CORR 1 |
Effects of current on human beings and livestock – Part 1: General aspects CORRIGENDUM 1-Fourth Edition |
|
IEC 60079-1-1 |
Electrical Apparatus for Explosive Gas Atmospheres - Part 1-1: Flameproof Enclosures |
|
IEC 60068-1 |
Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992 |
|
IEC 60364-5-54 |
Electrical Installations of Buildings - Part 5-54: Selection and Erection of Electrical Equipment - Earthing Arrangements, Protective Conductors and Protective Bonding Conductors-Second Edition; Replaces IEC 60364-5-548 |
|
IEC 60068-2-27 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ea and Guidance: Shock-Third Edition |
|
IEC 60364-4-43 |
Electrical Installations of Buildings - Part 4-43: Protection for Safety - Protection Against Overcurrent-Second Edition; Compiled from and Replaces IEC 60364-4-473 (1977) and Its Amendment 1 (1998); Corrigendum 1, 08/2002 |
|
IEC 60079-18 |
Electrical apparatus for explosive gas atmospheres - Part 18: Construction, test and marking of type of protection encapsulation |
|
IEC 61892-7 |
Mobile and Fixed Offshore Units - Electrical Installations - Part 7: Hazardous Areas-First Edition |
|
IEC 61025 |
Fault Tree Analysis (FTA)-Edition 2.0 |
|
IEC 60068-2-2 |
Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat-Fourth Edition; Supplement A-1976; Amendment 1-1993; Amendment 2-1994 |
|
IEC 60079-25 |
Electrical apparatus for explosive gas atmospheres Part 25: Intrinsically safe systems-First Edition |
|
IEC 60364-5-51 |
Electrical installations of buildings – Part 5-51: Selection and erection of electrical equipment – Common rules-Edition 5 |
|
IEC 60079-19 |
Explosive atmospheres – Part 19: Equipment repair, overhaul and reclamation-Second Edition |
|
IEC 60364-4-44 |
Electrical Installations of Buildings - Part 4-44: Protection for Safety - Protection Against Voltage Disturbances and Electromagnetic Disturbances-Edition 1.2; Consolidated Reprint |
|
IEC 60364-4-42 |
Electrical Installations of Buildings - Part 4-42: Protection of Safety - Protection Against Thermal Effects-Second Edition; Compiled from and Replaces IEC 60364-4-482 (1982) |
|
IEC 61892-1 |
Mobile and Fixed Offshore Units - Electrical Installations - Part 1: General Requirements and Conditions-First Edition |
|
IEC TR 60079-20 |
Electrical apparatus for explosive gas atmospheres – Part 20: Data for flammable gases and vapours, relating to the use of electrical apparatus-First Edition |
|
IEC TR 60079-13 |
Electrical Apparatus for Explosive Gas Atmospheres Part 13: Construction and Use of Rooms or Buildings Protected by Pressurization-First Edition |
|
IEC 60079-26 |
Explosive atmospheres – Part 26: Equipment with equipment protection level (EPL) Ga-Edition 2.0 |
|
IEC 60079-27 |
Electrical apparatus for explosive gas atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) and Fieldbus non-incendive concept (FNICO)-Edition 1 |
|
IEC 60079-4 |
Electrical Apparatus for Explosive Gas Atmospheres Part 4: Method of Test for Ignition Temperature-Second Edition; Amendment 1: 06-1995 |
|
IEC 60068-2-30 |
Environmental testing – Part 2-30: Tests – Test Db: Damp heat, cyclic (12 h + 12 h cycle)-Third Edition |
|
IEC 60364-5-53 |
Electrical Installations of Buildings - Part 5-53: Selection and Erection of Electrical Equipment - Isolation, Switching and Control-Edition 3.1; Edition 3: 2001 Consolidated with Amendment 1: 2002 |
|
IEC 60079-5 |
Explosive atmospheres – Part 5: Equipment protection by powder filling «q»-Edition 3.0 |
|
IEC 60079-6 |
Explosive atmospheres – Part 6: Equipment protection by oil immersion (o)-Edition 3.0 |
|
IEC CISPR 13 |
Sound and Television Broadcast Receivers and Associated Equipment - Radio Disturbance Characteristics - Limits and Methods of Measurement-Edition 4.2; Consolidated Reprint; |
|
IEC 60068-2-32 |
Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall-Second Edition; Incorporating Amendment 1; Amendment 2: 10-1990 |
|
IEC TS 60479-2 |
Effects of current on human beings and livestock – Part 2: Special aspects-Edition 3.0 |
|
IEC 61892-3 |
Mobile and Fixed Offshore Units - Electrical Installations - Part 3: Equipment-First Edition |
|
IEC 60068-2-14 |
Basic Environmental Testing Procedures Part 2: Tests Test N: Change of Temperature-Fifth Edition; Amendment 1: 4-1986 |
|
IEC 60068-2-64 |
Environmental Testing Part 2: Test Methods Test Fh: Vibration, Broad-Band Random (Digital Control) and Guidance-First Edition; Corrigendum 1:10/1993 |
|
IEC TR 60079-16 |
Electrical Apparatus for Explosive Gas Atmospheres Part 16: Artificial Ventilation for the Protection of Analyzer(s) Houses-First Edition |
|
IEC CISPR 24 |
Information Technology Equipment - Immunity Characteristics - Limits and Methods of Measurement-First Edition; Amendment 1:07-2001; Amendment 2:10-2002 |
|
IEC 61140 |
Protection Against Electric Shock - Common Aspects for Installation and Equipment-Third Edition; Amendment 1: 10/2004 |
|
IEC 60364-5-55 |
Electrical Installations of Buildings - Part 5-55: Selection and Erection of Electrical Equipment - Other Equipment-Edition 1.1; Edition 1: 2001 Consolidated with Amendment 1: 2001; Replaces IEC 60364-5-56 |
|
IEC CISPR 20 |
Sound and television broadcast receivers and associated equipment – Immunity characteristics – Limits and methods of measurement-Edition 6.0 |
|
IEC 61241-0 CORR 1 |
Electrical apparatus for use in the presence of combustible dust – Part 0: General requirements CORRIGENDUM 1-First Edition |
|
IEC 60092-352 |
Electrical installations in ships – Part 352: Choice and installation of electrical cables-Edition 3 |
|
IEC 61892-6 |
Mobile and Fixed Offshore Units - Electrical Installations - Part 6: Installation-First Edition |
|
IEC 60068-2-1 |
Environmental testing – Part 2-1: Tests – Test A: Cold-Edition 6.0 |
|
IEC 60945 |
Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and Required Test Results-Fourth Edition |
|
IEC 61892-5 |
Mobile and Fixed Offshore Units - Electrical Installations - Part 5: Mobile Units-First Edition; Replaces IEC 60092-505 |
|
IEC 60364-7-712 |
Electrical Installations of Buildings - Part 7-712: Requirements for Special Installations or Locations - Solar Photovoltaic (PV) Power Supply Systems-First Edition |
|
IEC 61882 |
Hazard and Operability Studies (HAZOP Studies) - Application Guide-First Edition |
|
IEC 60364-7-701 |
Low-voltage electrical installations – Part 7-701: Requirements for special installations or locations – Locations containing a bath or shower-Second Edition |
|
IEC 60364-7-714 |
Electrical Installations of Buildings - Part 7: Requirements for Special Installations or Locations - Section 714: External Lighting Installations-First Edition |
|
IEC 61000-6-4 |
Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments-Edition 2.0 |
|
IEC 60300-3-9 |
Dependability Management - Part 3: Application Guide - Section 9: Risk Analysis of Technological Systems-First Edition; Replaces CSA Q634-91-CAN/CSA |
|
IEC TR 60479-4 |
Effects of current on human beings and livestock Part 4: Effects of lightning strokes on human beings and livestock-First Edition |
|
IEC TR 60079-12 |
Electrical Apparatus for Explosive Gas Atmospheres Part 12: Classification of Mixtures of Gases or Vapours with Air According to Their Maximum Experimental Safe Gaps and Minimum Igniting Currents-First Edition |
|
IEC 60092-351 |
Electrical installations in ships Part 351: Insulating materials for shipboard and offshore units, power, control, instrumentation, telecommunication and data cables-Third Edition |
|
IEC 60092-302 |
Electrical Installations in Ships - Part 302: Low-Voltage Switchgear and Controlgear Assemblies-Fourth Edition |
|
IEC 60092-101 |
Electrical Installations in Ships - Part 101: Definitions and General Requirements-Edition 4.1; Edition 4: 1994 Consolidated with Amendment 1: 1995 |
|
IEC 60092-376 |
Electrical Installations in Ships Part 376: Cables for Control and Instrumentation Circuits 150/250 V (300 V)-Second Edition |
|
IEC 61160 |
Design Review-Edition 2 |
|
IEC 60533 |
Electrical and Electronic Installations in Ships - Electromagnetic Compatibility-Second Edition |
|
IEC 60092-359 |
Electrical Installations in Ships - Part 359: Sheathing Materials for Shipboard Power and Telecommunication Cables-Edition 1.2: Edition 1: 1987 Consolidated with Amendments 1: 1994 and 2: 1999 |
|
IEC 60364-7-740 |
Electrical Installations of Buildings - Part 7-740: Requirements for Special Installations or Locations - Temporary Electrical Installations for Structures, Amusement Devices and Booths at Fairgrounds, Amusement Parks and Circuses-First Edition |
|
IEC TS 60479-3 |
Effects of current on human beings and livestock – Part 3: Effects of currents passing through the body of livestock-First Edition |
|
IEC 60364-7-703 |
Electrical installations of buildings – Part 7-703: Requirements for special installations or locations – Rooms and cabins containing sauna heaters-Second Edition |
|
IEC 60364-7-704 |
Low-voltage electrical installations – Part 7-704: Requirements for special installations or locations – Construction and demolition site installations-Edition 2 |
|
IEC 60364-7-715 |
Electrical Installations of Buildings - Part 7-715: Requirements for Special Installations or Locations - Extra-Low-Voltage Lighting Installations-First Edition |
|
IEC 60364-7-702 |
Electrical Installations of Buildings - Part 7: Requirements for Special Installations or Locations - Section 702: Swimming Pools and Other Basins-Second Edition |
|
IEC 60364-7-706 |
Low-voltage electrical installations – Part 7-706: Requirements for special installations or locations – Conducting locations with restricted movement-Edition 2 |
|
IEC 60364-7-717 |
Electrical Installations of Buildings - Part 7-717: Requirements for Special Installations or Locations - Mobile or Transportable Units-First Edition |
|
IEC 60068-2-47 |
Environmental testing – Part 2-47: Tests – Mounting of specimens for vibration, impact and similar dynamic tests-Edition 3 |
|
IEC 60300-3-3 |
Dependability management – Part 3-3: Application guide – Life cycle costing-Second Edition |
|
IEC 60364-7-708 |
INTERNATIONAL STANDARD IEC CEI NORME INTERNATIONALE 60364-7-708 Second edition Deuxième édition 2007-05 Low-voltage electrical installations – Part 7-708: Requirements for special installations or locations – Caravan parks, camping parks and similar locations-Edition 2.0 |
|
IEC 60364-7-709 |
Low-voltage electrical installations – Part 7-709: Requirements for special installations or locations – Marinas and similar locations-Second Edition |
|
IEC 60364-7-705 |
Low-voltage electrical installations – Part 7-705: Requirements for special installations or locations – Agricultural and horticultural premises-Edition 2.0 |
|
IEC 60364-7-710 |
Electrical installations of buildings Part 7-710: Requirements for special installations or locations Medical locations-First Edition |
|
IEC 60092-354 |
Electrical installations in ships Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um = 36 kV)-Second Edition |
|
IEC 61558-2-6 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2: Particular Requirements for Safety Isolating Transformers for General Use |
|
IEC 60092-504 |
Electrical Installations in Ships - Part 504: Special Features - Control and Instrumentation-Third Edition |
|
IEC 60092-401 |
Electrical Installations in Ships - Part 401: Installation and Test of Completed Installation-Third Edition; Amendment 1-1987; Amendment 2-1997 |
|
IEC 60364-7-711 |
Electrical Installations of Buildings - Part 7-711: Requirements for Special Installations or Locations - Exhibitions, Shows and Stands-First Edition |
|
IEC 61363-1 |
Electrical Installations of Ships and Mobile and Fixed offshore Units - Part 1: Procedures for Calculating Short-Circuit Currents in Three-Phase a.c.-First Edition |
|
IEC TR 61200-52 |
Electrical Installation Guide - Part 52: Selection and Erection of Electrical Equipment - Wiring Systems-First Edition |
|
IEC 60092-301 |
Electrical Installations in Ships Part 301: Equipment - Generators and Motors-Third Edition; Amendment 1:05/1994; Amendment 2:04/1995 |
|
IEC 60068-2-29 |
Basic Environmental Testing Procedures Part 2: Tests - Tests Eb and Guidance: Bump-Second Edition |
|
IEC 60268-1 |
Sound System Equipment Part 1: General-Second Edition; Amendment 1:01-1988; Amendment 2: 06-1988 |
|
IEC 60300-1 |
Dependability management Part 1: Dependability management systems-Second Edition |
|
IEC 61558-2-1 |
Safety of power transformers, power supplies, reactors and similar products – Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications-Edition 2.0 |
|
IEC 60079-4A |
First Supplement to Publication 60079-4 [1966] Electrical apparatus for explosive gas atmospheres Part 4: Method of test for ignition temperature-Edition 1; ***This supplement also applies to the second edition of 1975*** |
|
IEC 60849 |
Sound Systems for Emergency Purposes-Second Edition |
|
IEC 60092-502 |
Electrical Installations in Ships - Part 502: Tankers - Special Features-Fifth Edition |
|
IEC 60300-3-11 |
Dependability Management - Part 3-11: Application Guide - Reliability Centred Maintenance-First Edition |
|
IEC 61779-1 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 1: General Requirements and Test Methods-First Edition |
|
IEC 61241-1 |
Electrical apparatus for use in the presence of combustible dust Part 1: Protection by enclosures |
|
IEC 60068-2-31 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens-First Edition; Amendment 1: 10-1982 |
|
IEC 60300-3-5 |
Dependability Management - Part 3-5: Application Guide - Reliability Test Conditions and Statistical Test Principles-First Edition |
|
IEC 60989 |
Separating Transformers, Autotransformers, Variable Transformers and Reactors-First Edition |
|
IEC 61078 |
Analysis techniques for dependability – Reliability block diagram and boolean methods-Edition 2 |
|
IEC 61558-2-17 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2: Particular Requirements for Transformers for Switch Mode Power Supplies-First Edition |
|
IEC 60092-202 |
Electrical Installations in Ships - Part 202: System Design - Protection-Fourth Edition; Amendment 1: 02-1996 |
|
IEC TR 61200-413 |
Electrical Installation Guide - Part 413: Protection Against Indirect Contact - Automatic Disconnection of Supply-Edition 1 |
|
IEC 60068-2-17 |
Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing-Fourth Edition |
|
IEC TR 60721-4-1 |
Classification of Environmental Conditions - Part 4-1: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Storage-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60092-303 |
Electrical Installations in Ships Part 303: Equipment - Transformers for Power and Lighting-Third Edition; Amendment 1- 1997 |
|
IEC 60092-375 |
Electrical Installations in Ships - Part 375: Shipboard Telecommunication Cables and Radio-Frequency Cables - General Instrumentation, Control and Communication Cables-First Edition |
|
IEC 60721-2-1 |
Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature Temperature and humidity-Edition 1.1; Edition 1: 1982 Consolidated with Amendment 1: 1987 |
|
IEC 61558-2-4 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2: Particular Requirements for Isolating Transformers for General Use-First Edition |
|
IEC 60092-204 |
Electrical Installations in Ships Part 204: System Design - Electric and Electrohydraulic Steering Gear-Third Edition |
|
IEC 60092-304 |
Electrical Installations in Ships Part 304: Equipment - Semiconductor Convertors-Third Edition; Amendment 1:04/1995 |
|
IEC 60092-503 |
Electrical installations in ships – Part 503: Special features – AC supply systems with voltages in the range of above 1 kV up to and including 15 kV-Edition 2.0 |
|
IEC 60300-3-4 |
Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements-First Edition |
|
IEC 60721-1 |
Classification of environmental conditions Part 1: Environmental parameters and their severities-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1992 and 2: 1995 |
|
IEC 60068-2-38 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test-First Edition |
|
IEC 61703 |
Mathematical Expressions for Reliability, Availability, Maintainability and Maintenance Support Terms-First Edition |
|
IEC 62198 |
Project Risk Management - Application Guidelines-First Edition |
|
IEC 60068-2-18 |
Environmental Testing Part 2-18: Tests - Test R and Guidance: Water-Second Edition |
|
IEC 60300-2 |
Dependability management Part 2: Guidelines for dependability management-Second Edition; |
|
IEC 60300-3-7 |
Dependability Management - Part 3-7: Application Guide - Reliability Stress Screening of Electronic Hardware-First Edition |
|
IEC TR 61201 |
Extra-Low Voltage (ELV) - Limit Values-First Edition |
|
IEC 60068-2-68 |
Environmental Testing - Part 2: Tests - Test L: Dust and Sand-First Edition |
|
IEC 60092-305 |
Electrical Installations in Ships Part 305: Equipment - Accumulator (Storage) Batteries-Third Edition; Amendment 1:07/1989 |
|
IEC 61558-2-13 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-13: Particular Requirements for Auto-Transformers for General Use-First Edition |
|
IEC 60068-2-7 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, Steady State-Second Edition; Amendment 1: 06/1986 |
|
IEC 60300-3-10 |
Dependability Management - Part 3-10: Application Guide - Maintainability-First Edition |
|
IEC 60958-3 |
Digital Audio Interface - Part 3: Consumer Applications-Third Edition |
|
IEC 61558-2-7 |
Safety of power transformers, power supplies, reactors and similar products – Part 2-7: Particular requirements and tests for transformers and power supplies for toys-Edition 2.0 |
|
IEC 60068-2-11 |
Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt Mist-Third Edition; Corrigendum: December 1999 |
|
IEC 60300-3-2 |
Dependability management – Part 3-2: Application guide – Collection of dependability data from the field-Second Edition |
|
IEC 61779-4 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 4: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Lower Explosive Limit-First Edition |
|
IEC 61779-6 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 6: Guide for the Selection, Installation, Use and Maintenance of Apparatus for the Detection and Measurement of Flammable Gases-First Edition |
|
IEC 61241-10 |
Electrical apparatus for use in the presence of combustible dust – Part 10: Classification of areas where combustible dusts are or may be present-First Edition; Replaces 61241-3: 1997 |
|
IEC 60092-306 |
Electrical Installations in Ships Part 306: Equipment - Luminaires and Accessories-Third Edition |
|
IEC 60300-3-1 |
Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology-Second Edition |
|
IEC 60721-3-0 |
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction-Edition 1.1; Edition 1: 1984 Consolidated with Amendment 1: 1987 |
|
IEC 61558-2-2 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2-2: Particular Requirements for Control Transformers-Edition 2.0 |
|
IEC 60300-3-14 |
Dependability management - Part 3-14: Application guide - Maintenance and maintenance support-First Edition; |
|
IEC 60092-307 |
Electrical Installations in Ships Part 307: Equipment - Heating and Cooking Appliances-Third Edition |
|
IEC 60092-373 |
Shipboard Telecommunication Cables and Radio-Frequency Cables Shipboard Flexible Coaxial Cables-First Edition |
|
IEC 60068-2-5 |
Basic Environmental Testing Procedures Part 2: Tests Test Sa: Simulated Solar Radiation at Ground Level-First Edition |
|
IEC 60068-2-52 |
Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution)-Second Edition; Corrigendum 1: 07/1996 |
|
IEC 60092-374 |
Electrical Installations in Ships - Part 374: Shipboard Telecommunication Cables and Radio-Frequency Cables - Telephone Cables for Non-Essential Communication Services-First Edition |
|
IEC 60268-16 |
Sound System Equipment - Part 16: Objective Rating of Speech Intelligibility by Speech Transmission Index-Third Edition |
|
IEC 60958-1 |
Digital audio interface Part 1: General-Second Edition |
|
IEC 60068-2-10 |
Environmental testing – Part 2-10: Tests – Test J and guidance: Mould growth-Edition 6 |
|
IEC 60958-4 |
Digital audio interface Part 4: Professional applications (TA4)-Second Edition |
|
IEC 61165 |
Application of Markov Techniques-Second Edition |
|
IEC 60068-2-9 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance for Solar Radiation Testing-First Edition; Amendment 1:1984; Corrigendum 1:08/1989 |
|
IEC 60092-501 |
Electrical Installations in Ships Part 501: Special Features - Electric Propulsion Plant-Third Edition |
|
IEC 60092-507 |
Electrical Installations in Ships - Part 507; Pleasure Craft-First Edition |
|
IEC 60721-3-6 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment-First Edition; Corrigendum 1: 9/1987; Amendment 1: 6/1991; Amendment 2: 11/1996 |
|
IEC 61241-14 |
Electrical apparatus for use in the presence of combustible dust Part 14: Selection and installation-First Edition |
|
IEC 60721-3-3 |
Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations-Edition 2.2; Edition 2: 1994 Consolidated with Amendments 1: 1995 and 2: 1996 |
|
IEC 61241-18 |
Electrical apparatus for use in the presence of combustible dust Part 18: Protection by encapsulation |
|
IEC 61558-2-23 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-23: Particular Requirements for Transformers for Construction Sites-First Edition 05-2000 |
|
IEC 61558-2-8 |
Safety of Small Power Transformers, Power Supply Units and Similar - Part 2-8: Particular Requirements for Bell and Chime Transformers-First Edition |
|
IEC 60068-2-60 |
Environmental Testing - Part 2: Tests - Test Ke: Flowing Mixed Gas Corrosion Test-Second Edition |
|
IEC 60410 |
Sampling plans and procedures for inspection by attributes-Edition 1.0; Incorporating Corrigenda: 02/1976 |
|
IEC 60449 |
Voltage bands for electrical installations of buildings-Edition 1.0; Amendment 1: 05/1979 |
|
IEC 61241-2-1 |
Electrical Apparatus for Use in the Presence of Combustible Dust - Part 2: Test Methods - Section 1: Methods for Determining the Minimum Ignition Temperatures of Dust First Edition-First Edition |
|
IEC 61558-2-15 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2-15: Particular Requirements for Isolating Transformers for the Supply of Medical Locations-First Edition |
|
IEC 61558-2-20 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-20: Particular Requirements for Small Reactors-First Edition |
|
IEC TR 60721-4-2 |
Classification of environmental conditions Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TR 60721-4-6 |
Classification of Environmental Conditions - Part 4-6: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ship Environment-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-78 |
Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab: Damp Heat, Steady State-First Edition; Replaces IEC 60068-2-3 and 60068-2-56 |
|
IEC 61241-17 |
Electrical apparatus for use in the presence of combustible dust Part 17: Inspection and maintenance of electrical installations in hazardous areas (other than mines)-First Edition |
|
IEC 61558-2-12 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-12: Particular Requirements for Constant Voltage Transformers-First Edition |
|
IEC 61779-5 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 5: Performance Requirements for Group II Apparatus Indicating a Volume Fraction Up to 100% Gas-First Edition |
|
IEC 60068-2-33 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests-First Edition; Amendment 1-1978 |
|
IEC 60092-506 |
Electric Installations in Ships - Part 506: Special Features - Ships Carrying Specific Dangerous Goods and Materials Hazardous Only in Bulk-Second Edition |
|
IEC 60721-3-4 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 4: Stationary Use at Non-Weatherprotected Locations-Second Edition; Amendment 1: 11/1996 |
|
IEC 60880 |
Nuclear power plants – Instrumentation and control systems important to safety – Software aspects for computer-based systems performing category A functions-Edition 2.0 |
|
IEC 61241-4 |
Electrical apparatus for use in the presence of combustible dust Part 4: Type of protection |
|
IEC 61558-2-3 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-3: Particular Requirements for Ignition Transformers for Gas and Oil Burners-First Edition |
|
IEC 61558-2-5 |
Safety of Power Transformers, Power Supply Units and Similar - Part 2-5: Particular Requirements for Shaver Transformers and Shaver Supply Units-First Edition |
|
IEC 60268-5 |
Sound System Equipment - Part 5: Loudspeakers-Third Edition |
|
IEC 61558-2-19 |
Safety of Power Transformers, Power Supply Units and Similar Devices - Part 2-19: Particular Requirements for Perturbation Attenuation Transformers-First Edition |
|
IEC 61779-2 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 2: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 5% Methane in Air-First Edition |
|
IEC 61937-1 |
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 Part 1: General-Second Edition |
|
IEC 61937-6 |
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 6: Non-linear PCM bitstreams according to the MPEG-2 AAC and MPEG-4 AAC audio formats-Edition 2 |
|
IEC TR 62066 |
Surge Overvoltages and Surge Protection in Low-Voltage a.c. Power Systems - General Basic Information-First Edition |
|
IEC 60268-2 |
Sound System Equipment Part 2: Explanation of General Terms and Calculation Methods-Second Edition; Amendment 1: 05/1991 |
|
IEC 61558-2-9 |
Safety of Small Power Transformers, Power Supply Units and Similar Products - Part 2.9: Particular Requirements for Transformers for Class III Handlamps for Tungsten Filament Lamps-First Edition |
|
IEC 61937-7 |
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 7: Non-linear PCM bitstreams according to the ATRAC, ATRAC2/3 and ATRAC-X formats-Second Edition |
|
IEC TR 61200-704 |
Electrical Installation Guide - Part 704: Construction and Demolition Site Installations-Edition 1 |
|
IEC 60605-2 |
Equipment Reliability Testing - Part 2: Design of Test Cycles-First Edition |
|
IEC 61779-3 |
Electrical Apparatus for the Detection and Measurement of Flammable Gases - Part 3: Performance Requirements for Group I Apparatus Indicating a Volume Fraction Up to 100% Methane in Air-First Edition |
|
IEC 61937-2 |
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 2: Burst-info-Edition 2 |
|
IEC TR 60721-4-5 |
Classification of Environmental Conditions - Part 4-5: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ground Vehicle Installations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-3-3 |
Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments-First Edition |
|
IEC 60706-2 |
Maintainability of equipment – Part 2: Maintainability requirements and studies during the design and development phase-Edition 2.0 |
|
IEC 60721-2-2 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Precipitation and Wind-First Edition |
|
IEC 61241-2-3 |
Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 3: Method for determining minimum ignition energy of dust/air mixtures-First Edition |
|
IEC 61937-3 CORR 1 |
Digital Audio - Interface for Non-Linear PCM Encoded Audio Bitstreams Applying IEC 60958 - Part 3: Non-Linear PCM Bitstreams According to the AC-3 Format CORRIGENDUM 1-First Edition |
|
IEC 62041 |
Power transformers, power supply units, reactors and similar products EMC requirements-First Edition |
|
IEC 60068-2-13 |
Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure-Fourth Edition |
|
IEC 60068-2-74 |
Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination-First Edition |
|
IEC 60960 |
Functional Design Criteria for a Safety Parameter Display System for Nuclear Power Stations-First Edition |
|
IEC 61226 |
Nuclear power plants – Instrumentation and control systems important to safety – Classification of instrumentation and control functions-Edition 2 |
|
IEC 62087 |
Methods of Measurement for the Power Consumption of Audio, Video and Related Equipment-First Edition |
|
IEC TR 60721-4-4 |
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-57 |
Environmental Testing - Part 2-57: Test - Test Ff: Vibration - Time-History Method-Second Edition |
|
IEC 60300-3-12 |
Dependability Management - Part 3-12: Application Guide - Integrated Logistic Support-First Edition |
|
IEC 60721-3-2 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 2: Transportation-Second Edition |
|
IEC 61937-4 CORR 1 |
Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 4: Non-linear PCM bitstreams according to the MPEG audio format CORRIGENDUM 1-First Edition |
|
IEC TR 60721-4-7 |
Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TS 61241-2-2 |
Electrical apparatus for use in the presence of combustible dust - Part 2: Test methods - Section 2: Method for determining the electrical resistivity of dust in layers-First Edition; Corrigendum 05/1994 |
|
IEC 60605-3-1 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Indoor Portable Equipment - Low Degree of Simulation-First Edition |
|
IEC 61966-2-1 |
Multimedia Systems and Equipment - Colour Measurement and Management - Part 2-1: Colour Management - Default RGB Colour Space - sRGB-First Edition; Amendment 1: 1/2003 |
|
IEC 61966-2-2 CORR 1 |
Multimedia systems and equipment – Colour measurement and management – Part 2-2 – Colour management – Extended RGB colour space - scRGB CORRIGENDUM 1-First Edition |
|
IEC 60728-11 |
Cable networks for television signals, sound signals and interactive services – Part 11: Safety-Edition 2 |
|
IEC 61097-6 |
Global maritime distress and safety system (GMDSS) – Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX)-Edition 2 |
|
IEC 61937-5 |
Digital Audio - Interface for Non-Linear PCM Encoded Audio Bitstreams Applying IEC 60958 - Part 5: Non-Linear PCM Bitstreams According to the DTS (Digital Theater Systems) Format(s)-Second Edition |
|
IEC TR 60721-4-0 |
Classification of Environmental Conditions - Part 4-0: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Introduction-First Edition |
|
IEC TR 60721-4-3 |
Classification of environmental conditions Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-80 |
Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode-Edition 1 |
|
IEC 60268-7 |
Sound System Equipment - Part 7: Headphones and Earphones-Second Edition |
|
IEC 60605-3-2 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Equipment for Stationary Use in Weatherprotected Locations - High Degree of Simulation-First Edition |
|
IEC 60706-5 |
Guide on Maintainability of Equipment - Part 5: Section 4: Diagnostic Testing-First Edition |
|
IEC 60721-2-4 |
Classification of environmental conditions Part 2-4: Environmental conditions appearing in nature Solar radiation and temperature-Edition 1.1; Edition 1: 1987 Consolidated with Amendment 1: 1988 |
|
IEC 60721-3-1 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 1: Storage-Second Edition |
|
IEC 60721-3-5 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 5: Ground Vehicle Installations-Second Edition |
|
IEC CISPR/TR 29 |
Television broadcast receivers and associated equipment – Immunity characteristics – Methods of objective picture assessment-First Edition |
|
IEC 60068-2-65 |
Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration, Acoustically Induced-First Edition |
|
IEC 60364-7-753 |
Low-voltage electrical installations Part 7-753: Requirements for special installations or locations Floor and ceiling heating systems-Edition 1 |
|
IEC 60605-4 |
Equipment Reliability Testing - Part 4: Statistical Procedures for Exponential Distribution - Point Estimates, Confidence Intervals, Prediction Intervals and Tolerance Intervals-Second Edition |
|
IEC 60706-3 |
Maintainability of equipment – Part 3: Verification and collection, analysis and presentation of data-Edition 2 |
|
IEC 60068-2-55 |
Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce-First Edition |
|
IEC 60721-2-8 |
Classification of Environmental Conditions - Part 2: Environmental Conditions Appearing in Nature - Section 8: Fire Exposure-First Edition |
|
IEC 60780 |
Nuclear Power Plants - Electrical Equipment of the Safety System - Qualification-Second Edition |
|
IEC 62252 |
Maritime navigation and radiocommunication equipment and systems Radar for craft not in compliance with IMO SOLAS Chapter V Performance requirements, methods of test and required test results-First Edition |
|
IEC 60050-723 |
International Electrotechnical Vocabulary - Chapter 723: Broadcasting: Sound, Television, Data-First Edition; Amendment 1: 05-1999 |
|
IEC 60936-1 |
Maritime navigation and radiocommunication equipment and systems Radar Part 1: Shipborne radar Performance requirements Methods of testing and required test results-Edition 1.1; Edition 1:1999 Consolidated with Amendment 1:2002 |
|
IEC 61097-8 |
Global Maritime Distress and Safety System (GMDSS) - Part 8: Shipborne Watchkeeping Receivers for the Reception of Digital Selective Calling (DSC) in the Maritime MF, MF/HF and VHF Bands - Operational and Performance Requirements, Methods of Testing and Required Test Results-First Edition |
|
IEC 61225 |
Nuclear power plants – Instrumentation and control systems important to safety – Requirements for electrical supplies-Edition 2 |
|
IEC 61883-1 |
Consumer Audio/Video Equipment - Digital Interface - Part 1: General-Second Edition |
|
IEC 61883-2 |
Consumer audio/video equipment – Digital interface – Part 2: SD-DVCR data transmission-Second Edition |
|
IEC 60068-2-53 |
Basic Environmental Testing Procedures Part 2: Tests Guidance to Tests Z/AFc and Z/BFc: Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests-First Edition |
|
IEC 60068-2-67 |
Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for Components-First Edition |
|
IEC 60721-2-5 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 5: Dust, Sand, Salt Mist-First Edition |
|
IEC 60721-3-7 |
Classification of Environmental Conditions - Part 3-7: Classification of Groups of Environmental Parameters and Their Severities - Portable and Non-Stationary Use-Edition 2.1; Edition 2:1995 Consolidated with Amendment 1:1996 |
|
IEC 61097-3 |
Global Maritime Distress and Safety System (GMDSS) - Part 3: Digital Selective Calling (DSC) Equipment - Operational and Performance Requirements, Methods of Testing and Required Testing Results-First Edition |
|
IEC 61162-1 |
Maritime navigation and radiocommunication equipment and systems – Digital interfaces Part 1: Single talker and multiple listeners-Edition 3.0 |
|
IEC 61709 |
Electronic Components - Reliability - Reference Conditions for Failure Rates and Stress Models for Conversion-First Edition |
|
IEC 61880 |
Video Systems (525/60) - Video and Accompanied Data Using the Vertical Blanking Interval - Analogue Interface-First Edition |
|
IEC 61883-4 |
Consumer audio/video equipment – Digital interface – Part 4: MPEG2-TS data transmission-Second Edition |
|
IEC 62238 |
Maritime navigation and radiocommunication equipment and systems VHF radiotelephone equipment incorporating Class |
|
IEC 62375 |
Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface-First Edition |
|
IEC CISPR/TR 31 |
Database on the characteristics of radio services-First Edition |
|
IEC 60068-2-59 |
Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine-Beat Method-First Edition |
|
IEC 60068-2-61 |
Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence-First Edition |
|
IEC 60068-2-81 |
Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis-First Edition |
|
IEC 60268-4 |
Sound system equipment Part 4: Microphones-Third Edition |
|
IEC 60721-2-3 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Air Pressure-First Edition |
|
IEC 60728-2 |
Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment-First Edition |
|
IEC 60964 |
Design for Control Rooms of Nuclear Power Plants-First Edition |
|
IEC 61097-10 |
Global Maritime Distress and Safety System (GMDSS) - Part 10: Inmarsat-B Ship Earth Station Equipment - Operational and Performance Requirements, Methods of Testing and Required Test Results-First Edition |
|
IEC 61124 |
Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity-Edition 2 |
|
IEC 61174 |
Maritime Navigation and Radiocommunication Equipment and Systems - Electronic Chart Display and Information System (ECDIS) - Operational and Performance Requirements, Methods of Testing and Required Test Results-Second Edition |
|
IEC 61966-5 |
Multimedia Systems and Equipment - Colour Measurement and Management - Part 5: Equipment Using Plasma Display Panels-First Edition |
|
IEC 62286 |
Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394-First Edition |
|
IEC TR 61963 |
Nuclear power plants Main control room Comparison of IEC 60964 to similar standards on control room design-Edition 1 |
|
IEC TR 62096 |
Nuclear power plants Instrumentation and control Guidance for the decision on modernization-First Edition |
|
IEC 60068-2-48 |
Basic Environmental Testing Procedures Part 2: Tests Guidance on the Application of the Tests of IEC Publication 68 to Simulate the Effects of Storage-First Edition |
|
IEC 60068-3-4 |
Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-First Edition; Replaces and Cancels IEC 60068-2-28: 1990 |
|
IEC 60094-3 |
Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics of Recording and Reproducing Equipment for Sound on Magnetic Tape-First Edition; Amendment 2:01/1988; Amendment 3:02/1996 |
|
IEC 60605-3-4 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Section 4: Test Cycle 4: Equipment for Portable and Non-Stationary Use - Low Degree of Stimulation-First Edition |
|
IEC 60846 |
Radiation Protection Instrumentation - Ambient and/or Directional Dose Equivalent (Rate) Meters and/or Monitors for Beta, X and Gamma Radiation-Second Edition |
|
IEC 60936-2 |
Maritime Navigation and Radiocommunication Equipment and Systems - Radar - Part 2: Shipborne Radar for High-Speed Craft (HSC) - Methods of Testing and Required Test Results-First Edition |
|
IEC 61052 |
IEC 1052 FASTBUS STANDARD ROUTINES Standard Routines for Use with FASTBUS Data Acquisition System-First Edition |
|
IEC 61097-13 |
Global maritime distress and safety system (GMDSS) Part 13: INMARSAT F77 ship earth station equipment Operational and performance requirements, methods of testing and required test results-First Edition |
|
IEC 61097-7 |
Global maritime distress and safety system (GMDSS) Part 7: Shipborne VHF radiotelephone transmitter and receiver Operational and performance requirements, methods of testing and required test results-First Edition |
|
IEC 61162-2 |
Maritime Navigation and Radiocommunication Equipment and Systems - Digital Interfaces - Part 2: Single Talker and Multiple Listeners, High-Speed Transmission-First Edition |
|
IEC 61241-11 CORR 1 |
Electrical apparatus for use in the presence of combustible dust – Part 11:Protection by intrinsic safety “iD†CORRIGENDUM 1-First Edition |
|
IEC 61500 |
Nuclear Power Plants - Instrumentation and Control Systems Important to Safety - Functional Requirements for Multiplexed Data Transmission-First Edition |
|
IEC 61966-9 |
Multimedia systems and equipment Colour measurement and management Part 9: Digital cameras-Second Edition |
|
IEC 62065 |
Maritime navigation and radiocommunication equipment and systems Track control systems Operational and performance requirements, methods of testing and required test results-First Edition |
|
IEC 62138 |
Nuclear power plants Instrumentation and control important for safety Software aspects for computer-based systems performing category B or C functions-First Edition |
|
IEC TR 60268-18 |
Sound System equipment - Part 18: Peak programme level meters - Digital audio peak level meter-First Edition |
|
IEC TR 62235 |
Nuclear facilities Instrumentation and control systems important to safety Systems of interim storage and final repository of nuclear fuel and waste-Edition 1 |
|
IEC TR 62247 |
Nuclear power plants Main control room design A review of the application of IEC 60964 (1989)-First Edition |
|
IEC 60068-2-45 |
Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents-First Edition; Erratum 1: 08/1981: Amendment 1: 02-1993 |
|
IEC 60068-2-66 |
Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)-First Edition |
|
IEC 60068-2-70 |
Environmental Testing - Part 2: Tests - Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and Hands-First Edition |
|
IEC 60094-1 |
Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements-Fourth Edition; Amendment 1:07/1994 |
|
IEC 60605-3-3 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Section 3: Test Cycle 3: Equipment for Stationary Use in Partially Weatherprotected Locations - Low Degree of Simulation-First Edition |
|
IEC 60605-6 |
Equipment reliability testing – Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity-Third Edition |
|
IEC 60721-2-7 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Fauna and Flora-First Edition |
|
IEC 60728-9 |
Cabled Distribution Systems for Television and Sound Signals - Part 9: Interfaces of Cabled Distribution Systems for Digitally Modulated Signals-Edition 1; Amendment 1: 06/2005 |
|
IEC 60980 |
Recommended Practices for Seismic Qualification of Electrical Equipment of the Safety System for Nuclear Generating Stations-First Edition |