|
IEC 60034-1 |
Rotating electrical machines Part 1: Rating and performance-Eleventh Edition |
|
IEC 61511-1 CORR 1 |
Functional safety - Safety instrumented systems for the process industry sector - Part 1: Framework, definitions, system, hardware and software requirements CORRIGENDUM 1-First Edition |
|
IEC 61508-1 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 1: General Requirements-First Edition; Corrigendum: 05-1999 |
|
IEC 61511-2 |
Functional safety - Safety instrumented systems for the process industry sector - Part 2: Guidelines for the application of IEC 61511-1-First Edition |
|
IEC 61511-3 |
Functional safety - Safety instrumented systems for the process industry sector - Part 3: Guidance for the determination of the required safety integrity levels-First Edition; Incorporates Corrigendum 1: 10/2004 |
|
IEC 60204-1 |
Safety of machinery - Electrical equipment of machines - Part 1: General requirements-Edition 5 |
|
IEC 60068-2-6 |
Environmental Testing - Part 2: Tests - Test FC: Vibration (Sinusoidal)-Sixth Edition; Corrigendum 1: 03/1995 |
|
IEC 60812 |
Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA)-Edition 2 |
|
IEC 61508-2 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 2: Requirements for Electrical/Electronic/Programmable Electronic Safety-Related Systems-First Edition |
|
IEC 60034-5 |
Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification-Edition 4.1; consolidated Reprint |
|
IEC 61508-3 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 3: Software Requirements-First Edition; Corrigendum: 04-1999 |
|
DOD 60034-2 |
Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles)-Third Edition; Amendment 1: 04/1995; Amendment 2: 11/1996 |
|
IEC 60034-2 |
Rotating Electrical Machines Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles)-Third Edition; Amendment 1: 04/1995; Amendment 2: 11/1996 |
|
IEC 61508-5 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 5: Examples of Methods for the Determination of Safety Integrity Levels-First Edition; Corrigendum: 04-1999 |
|
IEC 61508-6 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 6: Guidelines on the Application of IEC 61508-2 and IEC 61508-3-First Edition |
|
IEC 60695-10-2 CORR 1 |
Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test CORRIGENDUM 1-Second Edition |
|
IEC TR 61508-0 |
Functional safety of electrical/electronic/ programmable electronic safety-related systems Part 0: Functional safety and IEC 61508-First Edition |
|
IEC 60072-1 |
Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080-Sixth Edition; Incorporating Amendments 1 and 2 |
|
IEC 61508-4 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 4: Definitions and Abbreviations-First Edition; Corrigendum: 04-1999 |
|
IEC 61508-7 |
Functional Safety of Electrical/Electronic/Programmable Electronic Safety-Related Systems - Part 7: Overview of Techniques and Measures-First Edition |
|
IEC 60695-2-11 |
Fire Hazard Testing - Part 2-11: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for End-Products-First Edition; Cancels and Replaces the First Edition of IEC 60695-2-1/1:1994; Corrigendum 1-2001 |
|
IEC 61131-2 CORR 1 |
Programmable controllers - Part 2: Equipment requirements and tests CORRIGENDUM 1-Second Edition |
|
IEC 60068-1 |
Environmental Testing Part 1: General and Guidance-Sixth Edition; Amendment 1-1992 |
|
IEC 60034-14 |
Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity-Edition 3.1; Consolidated Reprint |
|
IEC 60695-2-10 |
Fire Hazard Testing - Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure-First Edition; Cancels and Replaces the First Edition of IEC 60695-2-1/0:1994 |
|
IEC 60034-3 |
Rotating electrical machines - Part 3: Specific requirements for cylindrical rotor synchronous machines-Edition 5.0;: 1988 |
|
IEC 60068-2-27 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ea and Guidance: Shock-Third Edition |
|
IEC 61158-2 CORR 1 |
Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 2: Physical layer specification and service definition CORRIGENDUM 1-Third Edition |
|
IEC 60034-4 |
Rotating Electrical Machines Part 4: Methods for Determining Synchronous Machine Quantities from Tests-Second Edition; Amendment 1: 04/1995 |
|
IEC 60034-12 AMD 1 |
Amendment 1 Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors-Edition 2.0 |
|
IEC 60695-2-12 |
Fire Hazard Testing - Part 2-12: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for Materials-First Edition; Supersedes IEC 60695-2-1/2:1994 |
|
IEC 60695-11-10 |
Fire hazard testing Part 11-10: Test flames 50 W horizontal and vertical flame test methods-Edition 1.1; Consolidated with Amendment 1: 2003 |
|
IEC 60034-7 |
Rotating Electrical Machines - Part 7: Classification of Types of Construction, Mounting Arrangements and Terminal Box Position (IM Code)-Edition 2.1; Edition 2:1992 Consolidated with Amendment 1:2000 |
|
IEC 61025 |
Fault Tree Analysis (FTA)-Edition 2.0 |
|
IEC 60068-2-2 |
Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat-Fourth Edition; Supplement A-1976; Amendment 1-1993; Amendment 2-1994 |
|
IEC 60534-4 |
Industrial-Process Control Valves - Part 4: Inspection and Routine Testing-Edition 3.0 |
|
DOD 61131-3 |
Programmable Controllers - Part 3: Programming Languages-Second Edition |
|
IEC 61131-3 |
Programmable Controllers - Part 3: Programming Languages-Second Edition |
|
IEC TS 60034-17 |
Rotating electrical machines - Part 17: Cage induction motors when fed from converters - Application guide-Edition 4.0 |
|
IEC 60695-2-13 |
Fire Hazard Testing - Part 2-13: Glowing/Hot-Wire Based Test Methods - Glow-WIre Ignitability Test Method for Materials-First Edition; Supersedes 60695-2-1/3:1994 |
|
IEC 60034-8 |
Rotating electrical machines - Part 8: Terminal markings and direction of rotation-Edition 3.0 |
|
IEC 60068-2-30 |
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)-Third Edition |
|
IEC 60034-9 AMD 1 |
Amendment 1 Rotating electrical machines - Part 9: Noise limits-Edition 4.0 |
|
IEC 61326 CORR 1 |
Electrical Equipment for Measurement, Control and Laboratory Use - EMC Requirements CORRIGENDUM 1-Second Edition |
|
IEC 60534-1 |
Industrial-Process Control Valves Part 1: Control Valve Terminology and General Considerations-Third Edition |
|
IEC 60534-2-1 |
Industrial-Process Control Valves - Part 2-1: Flow-Capacity - Sizing Equations for Fluid Flow under Installed Conditions-First Edition; Corrigendum: 02/2000 |
|
IEC 60695-11-5 |
Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance-First Edition; Supersedes IEC 60695-2-2: 1991 and Amendment 1: 1994 |
|
IEC 60068-2-32 |
Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall-Second Edition; Incorporating Amendment 1; Amendment 2: 10-1990 |
|
IEC 60068-2-14 |
Basic Environmental Testing Procedures Part 2: Tests Test N: Change of Temperature-Fifth Edition; Amendment 1: 4-1986 |
|
IEC 60068-2-64 |
Environmental Testing Part 2: Test Methods Test Fh: Vibration, Broad-Band Random (Digital Control) and Guidance-First Edition; Corrigendum 1:10/1993 |
|
IEC 61131-1 |
Programmable Controllers - Part 1: General Information-Second Edition |
|
IEC 60034-15 |
Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines with Form-Wound Stator Coils-Second Edition |
|
IEC 60034-11 |
Rotating electrical machines - Part 11: Thermal protection-Second Edition |
|
IEC 60034-18-1 |
Functional Evaluation of Insulation Systems for Rotating Electrical Machines Part 1: General Guidelines-First Edition; Amendment 1: 11/1996 |
|
IEC 60068-2-1 |
Environmental testing - Part 2-1: Tests - Test A: Cold-Edition 6.0 |
|
IEC 60695-1-1 |
Fire Hazard Testing - Part 1-1: Guidance for Assessing the Fire Hazard of Electrotechnical Products - General Guidelines-Third Edition; Corrigendum: 01-2000; Corrigendum 2, 08-2000 |
|
IEC 62061 CORR 1 |
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems CORRIGENDUM 1-First Edition |
|
IEC TS 60695-11-4 |
Fire Hazard Testing - Part 11-4: Test Flames - 50 W Flames - Apparatus and Confirmational Test Methods-Second Edition |
|
IEC 60034-22 |
Rotating electrical machines Part 22: AC generators for reciprocating internal combustion (RIC) engine driven generating sets-First Edition |
|
IEC 60534-8-4 CORR 1 |
Industrial-process control valves - Part 8-4: Noise considerations - Prediction of noise generated by hydrodynamic flow CORRIGENDUM 1-Second Edition |
|
IEC 61882 |
Hazard and Operability Studies (HAZOP Studies) - Application Guide-First Edition |
|
IEC 60300-3-9 |
Dependability Management - Part 3: Application Guide - Section 9: Risk Analysis of Technological Systems-First Edition; Replaces CSA Q634-91-CAN/CSA |
|
IEC 60751 |
Industrial Platinum Resistance Thermometer Sensors-Bilingual; First Edition; Amendment 1-1986; Amendment 2-1995; BS EN 60751: 1996 |
|
IEC 60072-3 |
Dimensions and Output Series for Rotating Electrical Machines - Part 3: Small Built-In Motors - Flange Numbers BF10 to BF50-First Edition |
|
IEC 60534-8-3 |
Industrial-Process Control Valves - Part 8-3: Noise Considerations - Control Valve Aerodynamic Noise Prediction Method-Second Edition |
|
IEC 60584-3 |
Thermocouples Part 3: Extension and Compensating Cables - Tolerances and Identification System-First Edition |
|
IEC TR 61131-4 |
Programmable Controllers - Part 4: User Guidelines First Edition-Second Edition |
|
IEC CISPR 12 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers-Edition 6.0 |
|
IEC 60072-2 |
Dimensions and Output Series for Rotating Electrical Machines Part 2: Frame Numbers 355 to 1 000 and Flange Numbers 1180 to 2360-First Edition |
|
IEC 61160 |
Design Review-Edition 2 |
|
IEC 60534-2-3 |
Industrial-Process Control Valves - Part 2-3: Flow Capacity - Test Procedures-Second Edition |
|
IEC 60695-11-20 |
Fire hazard testing Part 11-20: Test flames 500 W flame test methods-Edition 1.1; Edition 1: 1999 Consolidated With Amendment 1: 2003 |
|
IEC 60034-16-1 |
Rotating Electrical Machines Part 16: Excitation Systems for Synchronous Machines Chapter 1: Definitions-First Edition; Incorporates Corrigendum: 1992 |
|
IEC 60534-2-4 |
Industrial-Process Control Valves Part 2: Flow Capacity Section Four - Inherent Flow Characteristics and Rangeability-First Edition |
|
IEC 60584-2 |
Thermocouples Part 2: Tolerances-First Edition; Amendment 1: 06-1989 |
|
IEC 61158-5 CORR 1 |
Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 5: Application Layer Service Definition CORRIGENDUM 1-Third Edition |
|
IEC 60068-2-47 |
Environmental testing - Part 2-47: Tests - Mounting of specimens for vibration, impact and similar dynamic tests-Edition 3 |
|
IEC 60300-3-3 |
Dependability management - Part 3-3: Application guide - Life cycle costing-Second Edition |
|
IEC 61131-5 |
Programmable Controllers - Part 5: Communications-First Edition |
|
IEC 60584-1 |
Thermocouples Part 1: Reference Tables-Second Edition |
|
IEC TS 60695-11-3 |
Fire Hazard Testing - Part 11-3: Test Flames - 500 W Flames - Apparatus and Confirmational Test Methods-Second Edition |
|
IEC 61000-4-29 |
Electromagnetic Compatibility (EMC) - Part 4-29: Testing and Measurement Techniques - Voltage Dips, Short Interruptions and Voltage Variations on d.c. Input Power Port Immunity Tests-First Edition |
|
IEC TS 60034-23 |
Rotating electrical machines Part 23: Specification for the refurbishing of rotating electrical machines-First Edition |
|
IEC 60034-18-21 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 21: Test Procedures for Wire-Wound Windings - Thermal Evaluation and Classification-First Edition; Amendment 1: 11/1994; Amendment 2: 11/1996 |
|
IEC TR 61131-8 |
Programmable Controllers - Part 8: Guidelines for the Application and Implementation of Programming Languages-Second Edition |
|
IEC TS 60034-16-2 |
Rotating electrical machines Part 16: Excitation systems for synchronous machines Chapter 2: Models for power system studies-First Edition |
|
IEC 60034-19 |
Rotating Electrical Machines - Part 19: Specific Test Methods for D.C. Machines on Conventional and Rectifier-Fed Supplies-First Edition |
|
IEC 60034-18-31 |
Rotating Electrical Machines Part 18: Functional Evaluation of Insulation Systems Section 31: Test Procedures for Form-Wound Windings - Thermal Evaluation and Classification of Insulation Systems Used in Machines up to and Including 50 mVA and 15 kV-First Edition; Amendment 1: 11/1996 |
|
IEC 60068-2-29 |
Basic Environmental Testing Procedures Part 2: Tests - Tests Eb and Guidance: Bump-Second Edition |
|
IEC 60534-2-5 |
Industrial process control valves Part 2-5: Flow apacity Sizing equations for fluid flow through multistage control valves with interstage recovery-First Edition |
|
IEC TS 60034-18-33 |
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 33: Test procedures for form-wound windings - Multifactor functional evaluation - Endurance under combined thermal and electrical stresses of insulation systems used in machines up to and including 50 MVA and 15 kV-First Edition |
|
IEC TS 60034-25 |
Rotating electrical machines - Part 25: Guidance for the design and performance of a.c. motors specifically designed for converter supply-Second Edition |
|
IEC 60300-1 |
Dependability management Part 1: Dependability management systems-Second Edition |
|
IEC TS 60034-16-3 |
Rotating Electrical Machines - Part 16: Excitation Systems for Synchronous Machines - Section 3: Dynamic Performance-Edition 1 |
|
IEC TR 61831 |
On-Line Analyser Systems - Guide to Design and Installation-First Edition |
|
IEC TS 60034-18-32 |
Rotating electrical machines - Part 18: Functional evaluation of insulation systems - Section 32: Test procedures for form-wound windings - Electrical evaluation of insulation systems used in machines up to and including 50 MVA and 15 kV-First Edition |
|
IEC 60034-18-22 |
Rotating Electrical Machines - Part 18-22: Functional Evaluation of Insulation Systems - Test Procedures for Wire-Wound Windings - Classification of Changes and Insulation Component Substitutions-Second Edition |
|
IEC 61131-7 |
Programmable Controllers - Part 7: Fuzzy Control Programming-First Edition |
|
IEC 60300-3-11 |
Dependability Management - Part 3-11: Application Guide - Reliability Centred Maintenance-First Edition |
|
IEC 60534-7 |
Industrial-Process Control Valves Part 7: Control Valve Data Sheet-First Edition |
|
IEC TR 61158-1 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 1: Overview and guidance for the IEC 61158 series |
|
IEC 60050-411 |
International Electrotechnical Vocabulary Chapter 411: Rotating Machines-Second Edition |
|
IEC 60068-2-31 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens-First Edition; Amendment 1: 10-1982 |
|
IEC 60300-3-5 |
Dependability Management - Part 3-5: Application Guide - Reliability Test Conditions and Statistical Test Principles-First Edition |
|
IEC 61078 |
Analysis techniques for dependability - Reliability block diagram and boolean methods-Edition 2 |
|
IEC 61158-4 CORR 1 |
Digital data communications for measurement and control - Fieldbus for use in industrial control systems - Part 4: Data link protocol specification CORRIGENDUM 1-Third Edition |
|
IEC 60534-3-1 |
Industrial-Process Control Valves - Part 3-1: Dimensions - Face-to-Face Dimensions for Flanged, Two-Way, Globe-Type, Straight Pattern and Centre-To-Face Dimensions for Flanged, Two-Way, Globe-Type, Angle Pattern Control Valves-First Edition; Supersedes IEC 60534-3:1976 |
|
IEC TS 60034-18-34 |
Rotating Electrical Machines - Part 18-34: Functional Evaluation of Insulation Systems - Test Procedures for Form-Wound Windings - Evaluation of Thermomechanical Endurance of Insulation Systems-Edition 1 |
|
IEC 60068-2-17 |
Basic Environmental Testing Procedures Part 2: Tests - Test Q: Sealing-Fourth Edition |
|
IEC 60204-11 |
Safety of Machinery - Electrical Equipment of Machines - Part 11: Requirements for HV Equipment for Voltages Above 1 000 V a.c. or 1 500 V d.c. and Not Exceeding 36 kV-First Edition |
|
IEC 60695-11-2 CORR 1 |
Fire hazard testing - Part 11-2: Test flames - 1 kW nominal pre-mixed flame - Apparatus, confirmatory test arrangement and guidance CORRIGENDUM 1-First Edition |
|
IEC TR 60721-4-1 |
Classification of Environmental Conditions - Part 4-1: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Storage-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60851-5 |
Winding Wires - Test Methods - Part 5: Electrical Properties-Edition 3.2; Edition 3:1996 Consolidated with Amendments 1:1997 and 2:2004 |
|
IEC 60068-2-20 |
Basic Environmental Testing Procedures Part 2: Tests - Test T: Soldering-Fourth Edition; Amendment 2-1987 |
|
IEC 60534-5 |
Industrial-process control valves - Part 5: Marking-Second Edition |
|
IEC 60204-32 |
Safety of Machinery - Electrical Equipment of Machines - Part 32: Requirements for Hoisting Machines-First Edition |
|
IEC 60721-2-1 |
Classification of environmental conditions Part 2-1: Environmental conditions appearing in nature Temperature and humidity-Edition 1.1; Edition 1: 1982 Consolidated with Amendment 1: 1987 |
|
IEC 61784-1 CORR 1 |
Digital data communications for measurement and control - Part 1: Profile sets for continuous and discrete manufacturing relative to fieldbus use in industrial control systems CORRIGENDUM 1-First Edition |
|
IEC CISPR 25 INT |
Radio disturbance characteristics for the protection of receivers used on board vehicles, boats, and on devices - Limits and methods of measurement-Edition 2.0 |
|
IEC 60851-3 |
Winding Wires - Test Methods - Part 3: Mechanical Properties-Edition 2.1; Edition 2: 1996, Consolidated with Amendment 1: 1997; Amendment 2: 9/2003 |
|
IEC 60534-8-1 |
Industrial-Process Control Valves Part 8: Noise Considerations Section One - Laboratory Measurement of Noise Generated by Aerodynamic Flow Through Control Valves-Edition 2 |
|
IEC 60300-3-4 |
Dependability Management - Part 3: Application Guide - Section 4: Guide to the Specification of Dependability Requirements-First Edition |
|
IEC 60721-1 |
Classification of environmental conditions Part 1: Environmental parameters and their severities-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1992 and 2: 1995 |
|
IEC 61499-1 |
Function blocks Part 1: Architecture-First Edition; Replaces IEC/PAS 61499-1: 2000 |
|
IEC 60068-2-38 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test-First Edition |
|
IEC 60534-8-2 |
Industrial-Process Control Valves Part 8: Noise Considerations Section 2: Laboratory Measurement of Noise Generated by Hydrodynamic Flow Through Control Valves-First Edition |
|
IEC 61703 |
Mathematical Expressions for Reliability, Availability, Maintainability and Maintenance Support Terms-First Edition |
|
IEC 61986 |
Rotating electrical machines Equivalent loading and super-position techniques Indirect testing to determine temperature rise-First Edition |
|
IEC 62198 |
Project Risk Management - Application Guidelines-First Edition |
|
IEC TS 60034-20-1 |
Rotating Electrical Machines - Part 20-1: Control Motors - Stepping Motors-First Edition |
|
IEC 60654-1 |
Industrial-process measurement and control equipment - Operating conditions - Part 1: Climatic conditions-Second Edition |
|
IEC 60695-4 |
Fire hazard testing - Part 4: Terminology concerning fire tests for electrotechnical products-Edition 3.0 |
|
IEC 60851-6 |
Winding Wires - Test Methods - Part 6: Thermal Properties-Second Edition; Amendment 1 05-1997; Amendment 2 12-2003 |
|
IEC 61158-3 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Part 3: Data link service definition-Third Edition |
|
IEC 60068-2-68 |
Environmental Testing - Part 2: Tests - Test L: Dust and Sand-First Edition |
|
IEC 60695-10-3 |
Fire Hazard Testing - Part 10-3: Abnormal Heat - Mould Stress Relief Distortion Test-First Edition |
|
IEC 60068-2-18 |
Environmental Testing Part 2-18: Tests - Test R and Guidance: Water-Second Edition |
|
IEC 60300-2 |
Dependability management Part 2: Guidelines for dependability management-Second Edition; |
|
IEC 60300-3-7 |
Dependability Management - Part 3-7: Application Guide - Reliability Stress Screening of Electronic Hardware-First Edition |
|
IEC 60068-2-7 |
Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, Steady State-Second Edition; Amendment 1: 06/1986 |
|
IEC 60300-3-10 |
Dependability Management - Part 3-10: Application Guide - Maintainability-First Edition |
|
IEC 60534-3-2 |
Industrial-Process Control Valves - Part 3-2: Dimensions - Face-to-Face Dimensions for Rotary Control Valves Except Butterfly Valves-Second Edition |
|
IEC 60534-6-1 |
Industrial-Process Control Valves - Part 6: Mounting Details for Attachment of Positioners to Control Valves - Section 1: Positioner Mounting on Linear Actuators-First Edition; Supersedes IEC 60534-6:1985 |
|
IEC 60695-1-30 |
Fire Hazard Testing - Part 1-30: Guidance for Assessing the Fire Hazard of Electrotechnical Products - Use of Preselection Testing Procedures-First Edition; Replaces IEC 60695-1-3 |
|
IEC 61158-6 CORR 1 |
Digital Data Communications for Measurement and Control - Fieldbus for Use in Industrial Control Systems - Part 6: Application Layer Protocol Specification CORRIGENDUM 1-Third Edition |
|
IEC 61496-1 |
Safety of machinery Electro-sensitive protective equipment Part 1: General requirements and tests-Second Edition |
|
IEC PAS 62030 |
Digital data communications for measurement and control Fieldbus for use in industrial control systems Section 1: MODBUS Application Protocol Specification V1.1a Section 2: Real-Time Publish-Subscribe (RTPS) Wire Protocol Specification Version 1.0-First Edition |
|
IEC 61972 |
Method for determining losses and efficiency of three-phase cage induction motors-First Edition |
|
IEC 60068-2-11 |
Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt Mist-Third Edition; Corrigendum: December 1999 |
|
IEC 60300-3-2 |
Dependability management - Part 3-2: Application guide - Collection of dependability data from the field-Second Edition |
|
IEC 60654-4 |
Operating conditions for industrial-process measurement and control equipment. Part 4: Corrosive and erosive influences-First Edition |
|
IEC 60695-6-1 |
Fire hazard testing Part 6-1: Smoke obscuration General guidance-Edition 2 |
|
IEC 9506-5 |
Industrial Automation Systems - Manufacturing Message Specification - Part 5: Companion Standard for Programmable Controllers-First Edition |
|
IEC 60621-2 |
Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 2: General protection requirements-Second Edition |
|
IEC 61499-2 |
Function blocks Part 2: Software tools requirements-First Edition; Replaces IEC/PAS 61499-2: 2001 |
|
IEC 60300-3-1 |
Dependability management Part 3-1: Application guide Analysis techniques for dependability Guide on methodology-Second Edition |
|
IEC 60534-3-3 |
Industrial-Process Control Valves - Part 3-3: Dimensions - End-to-End Dimensions for Buttweld, Two-Way, Globe-Type, Straight Pattern Control Valves-First Edition |
|
IEC 60695-7-1 |
Fire hazard testing - Part 7-1: Toxicity of fire effluent - General guidance-Second Edition |
|
IEC 60721-3-0 |
Classification of environmental conditions Part 3: Classification of groups of environmental parameters and their severities Introduction-Edition 1.1; Edition 1: 1984 Consolidated with Amendment 1: 1987 |
|
IEC 60300-3-14 |
Dependability management - Part 3-14: Application guide - Maintenance and maintenance support-First Edition; |
|
IEC 60851-1 |
Winding wires - Test methods - Part 1: General-Second Edition; Amendment 1 12-2003 |
|
IEC 60068-2-5 |
Basic Environmental Testing Procedures Part 2: Tests Test Sa: Simulated Solar Radiation at Ground Level-First Edition |
|
IEC 60068-2-52 |
Environmental Testing - Part 2: Tests - Test Kb: Salt Mist, Cyclic (Sodium Chloride Solution)-Second Edition; Corrigendum 1: 07/1996 |
|
IEC 61506 |
Industrial-Process Measurement and Control - Documentation of Application Software-First Edition |
|
IEC 60534-6-2 |
Industrial-Process Control Valves - Part 6-2: Mounting Details for Attachment of Positioners to Control Valves - Positioner Mounting on Rotary Actuators-First Edition |
|
IEC 61285 |
Industrial-Process Control - Safety of Analyser Houses-Second Edition |
|
IEC 60068-2-9 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance for Solar Radiation Testing-First Edition; Amendment 1:1984; Corrigendum 1:08/1989 |
|
IEC 60695-9-1 |
Fire Hazard Testing - Part 9-1: Surface Spread of Flame - General Guidance-Edition 2 |
|
IEC 60721-3-6 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment-First Edition; Corrigendum 1: 9/1987; Amendment 1: 6/1991; Amendment 2: 11/1996 |
|
IEC 60068-2-10 |
Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth-Edition 6 |
|
IEC 61165 |
Application of Markov Techniques-Second Edition |
|
IEC TR 61499-3 |
Function blocks for industrial-process measurement and control systems Part 3: Tutorial information-First Edition |
|
IEC 60068-2-60 |
Environmental Testing - Part 2: Tests - Test Ke: Flowing Mixed Gas Corrosion Test-Second Edition |
|
IEC 60410 |
Sampling plans and procedures for inspection by attributes-Edition 1.0; Incorporating Corrigenda: 02/1976 |
|
IEC 60488-1 |
Higher performance protocol for the standard digital interface for programmable instrumentation Part 1: General-First Edition; Identical to IEEE 488.1; Replaces IEC 60625-1:1993 |
|
IEC TR 60721-4-2 |
Classification of environmental conditions Part 4-2: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Transportation-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TR 60721-4-6 |
Classification of Environmental Conditions - Part 4-6: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ship Environment-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60204-31 |
Safety of Machinery - Electrical Equipment of Machines - Part 31: Particular Safety and EMC Requirements for Sewing Machines, Units and Systems-Third Edition |
|
IEC 60721-3-3 |
Classification of environmental conditions Part 3-3: Classification of groups of environmental parameters and their severities Stationary use at weatherprotected locations-Edition 2.2; Edition 2: 1994 Consolidated with Amendments 1: 1995 and 2: 1996 |
|
IEC 60770-1 |
Transmitters for Use in Industrial-Process Control Systems - Part 1: Methods for Performance Evaluation-First Edition; Should be Read in Conjunction with IEC 61298 Parts 1 Through 4 |
|
IEC 60068-2-33 |
Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests-First Edition; Amendment 1-1978 |
|
IEC 60621-1 |
Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 1: Scope and definitions-Second Edition |
|
IEC 60721-3-4 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 4: Stationary Use at Non-Weatherprotected Locations-Second Edition; Amendment 1: 11/1996 |
|
IEC 61496-2 |
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs)-Edition 2 |
|
IEC 61496-3 |
Safety of Machinery - Electro-Sensitive Protective Equipment - Part 3: Particular Requirements for Active Opto-Electronic Protective Devices Responsive to Diffuse Reflection (AOPDDR)-First Edition |
|
IEC 60068-2-78 |
Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab: Damp Heat, Steady State-First Edition; Replaces IEC 60068-2-3 and 60068-2-56 |
|
IEC 60654-2 |
Operating conditions for industrial-process measurement and control equipment. Part 2: Power-First Edition; Amendment 1: 10/1992 |
|
IEC 60695-8-1 |
Fire Hazard Testing - Part 8-1: Heat Release - General Guidance-First Edition |
|
IEC PAS 62424 |
Representation of process control engineering requests in P&I diagrams and data exchange between P&ID tools and PCE-CAE tools-Edition 1 |
|
IEC 60654-3 |
Operating conditions for industrial-process measurement and control equipment. Part 3: Mechanical influences-First Edition |
|
IEC 60695-5-1 |
Fire hazard testing Part 5-1: Corrosion damage effects of fire effluent General guidance-Second Edition |
|
IEC 60770-2 |
Transmitters for use in industrial-process control systems Part 2: Methods for inspection and routine testing-Second Edition |
|
IEC TS 60695-9-2 |
Fire hazard testing - Part 9-2: Surface spread of flame - Summary and relevance of test methods-Second Edition |
|
IEC 60068-3-3 |
Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments-First Edition |
|
IEC 60706-2 |
Maintainability of equipment - Part 2: Maintainability requirements and studies during the design and development phase-Edition 2.0 |
|
IEC 60721-2-2 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Precipitation and Wind-First Edition |
|
IEC TR 60279 |
Measurement of the Winding Resistance of an A.C. Machine During Operation at Alternating Voltage-Edition 1 |
|
IEC TR 60695-7-2 |
Fire Hazard Testing - Part 7-2: Toxicity of fire Effluent - Summary and Relevance of Test Methods-First Edition |
|
IEC TR 60894 |
Guide for a Test Procedure for the Measurement of Loss Tangent of Coils and Bars for Machine Windings-First Edition; Corrigendum 07/1987 |
|
IEC 60605-2 |
Equipment Reliability Testing - Part 2: Design of Test Cycles-First Edition |
|
IEC TR 60721-4-5 |
Classification of Environmental Conditions - Part 4-5: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Ground Vehicle Installations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-57 |
Environmental Testing - Part 2-57: Test - Test Ff: Vibration - Time-History Method-Second Edition |
|
IEC 60300-3-12 |
Dependability Management - Part 3-12: Application Guide - Integrated Logistic Support-First Edition |
|
IEC 60721-3-2 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 2: Transportation-Second Edition |
|
IEC 61326-1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements-Edition 1.0 |
|
IEC 61373 |
Railway Applications - Rolling Stock Equipment - Shock and Vibration Tests-First Edition |
|
IEC 88528-11 |
Reciprocating internal combustion engine driven alternating current generating sets - Part 11: Rotary uninterruptible power systems - Performance requirements and test methods-First Edition |
|
IEC TR 60721-4-7 |
Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC 60068-2-13 |
Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure-Fourth Edition |
|
IEC 60068-2-74 |
Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination-First Edition |
|
IEC 60381-1 |
Analogue Signals for Process Control Systems Part 1: Direct Current Signals-Second Edition |
|
IEC 60621-3 |
Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 3: General requirements for equipment and ancillaries-First Edition; Amendment 1: 01/1986 |
|
IEC PAS 62419 |
Control technology Rules for the designation of measuring instruments-Edition 1 |
|
IEC TR 60721-4-4 |
Classification of environmental conditions - Part 4-4: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Stationary use at non-weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TR 61015 |
Brush-Holders for Electrical Machines Guide to the Measurement of the Static Thrust Applied to Brushes-First Edition |
|
IEC TS 60695-6-30 |
Fire hazard testing - Part 6: Guidance and test methods on the assessment of obscuration hazard of vision caused by smoke opacity from electrotechnical products involved in fires - Section 30: Small scale static method - Determination of smoke opacity - Description of the apparatus |
|
IEC 60349-1 |
Electric Traction - Rotating Electrical Machines for Rail and Road Vehicles - Part 1: Machines Other Than Electronic Convertor-Fed Alternating Current Motors-Edition 1.1: Edition 1: 1999 Consolidated with Amendment 1: 2002 |
|
IEC TR 60721-4-0 |
Classification of Environmental Conditions - Part 4-0: Guidance for the Correlation and Transformation of Environmental Condition Classes of IEC 60721-3 to the Environmental Tests of IEC 60068 - Introduction-First Edition |
|
IEC TR 60721-4-3 |
Classification of environmental conditions Part 4-3: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Stationary use at weatherprotected locations-Edition 1.1; Edition 1: 2001 Consolidated With Amendment 1: 2003 |
|
IEC TS 60695-1-40 |
Fire hazard testing Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids-First Edition |
|
IEC TS 60695-6-31 |
Fire Hazard Testing - Part 6-31: Smoke Obscuration - Small-Scale Static Test - Materials-First Edition |
|
IEC TS 60695-7-3 |
Fire hazard testing Part 7-3: Toxicity of fire effluent Use and interpretation of test results-Second Edition |
|
IEC 60317-0-1 |
Specifications for Particular Types of Winding Wires - Part 0-1: General Requirements - Enamelled Round Copper Wire-Edition 2.2; Edition 2:1997 Consolidated with Amendments 1:1999 and 2:2005 |
|
IEC 60605-3-1 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Indoor Portable Equipment - Low Degree of Simulation-First Edition |
|
IEC 60913 |
Electric Traction Overhead Lines-First Edition |
|
IEC 61520 |
Metal Thermowells for Thermometer Sensors - Functional Dimensions-First Edition |
|
IEC TR 60668 |
Dimensions of Panel Areas and Cut-outs for Panel and Rack-Mounted Industrial-Process Measurement and Control Instruments First Edition |
|
IEC TR 60695-11-30 |
Fire Hazard Testing - Part 11-30: Test Flames - History and Development from 1979 to 1999-First Edition |
|
IEC TS 60349-3 |
Electric traction - Rotating electrical machines for rail and road vehicles - Part 3: Determination of the total losses of convertor-fed alternating current motors by summation of the component losses-First Edition |
|
IEC TS 60695-11-21 |
Fire hazard testing Part 11-21: Test flames 500 W vertical flame test method for tubular polymeric materials-Edition 1 |
|
IEC TS 60695-11-40 |
Fire Hazard Testing - Part 11-40: Test Flames - Confirmatory Tests - Guidance-First Edition |
|
IEC TS 60695-7-50 |
Fire hazard testing Part 7-50: Toxicity of fire effluent Estimation of toxic potency Apparatus and test method |
|
IEC 60068-2-65 |
Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration, Acoustically Induced-First Edition |
|
IEC 60077-1 |
Railway Applications - Electric Equipment for Rolling Stock - Part 1: General Service Conditions and General Rules-First Edition |
|
IEC 60172 |
Test Procedure for the Determination of the Temperature Index of Enamelled Winding Wires-Third Edition; Amendment 1- 1997 |
|
IEC 60605-4 |
Equipment Reliability Testing - Part 4: Statistical Procedures for Exponential Distribution - Point Estimates, Confidence Intervals, Prediction Intervals and Tolerance Intervals-Second Edition |
|
IEC 60706-3 |
Maintainability of equipment - Part 3: Verification and collection, analysis and presentation of data-Edition 2 |
|
IEC 61298-3 |
Process Measurement and Control Devices - General Methods and Procedures for Evaluating Performance - Part 3: Tests for the Effects of Influence Quantities-First Edition |
|
IEC 61518 |
Mating Dimensions between Differential Pressure (Type) Measuring Instruments and Flanged-On Shut-Off Devices up to 413 Bar (41,3 MPa)-First Edition |
|
IEC 62264-1 |
Enterprise-control system integration Part 1: Models and terminology-First Edition |
|
IEC 60068-2-80 |
Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode-Edition 1 |
|
IEC 60077-5 |
Railway applications Electric equipment for rolling stock Part 5: Electrotechnical components Rules for HV fuses-First Edition |
|
IEC 60546-1 |
Controllers with Analogue Signals for Use in Industrial-Process Control Systems Part 1: Methods of Evaluating the Performance-Second Edition |
|
IEC 60605-3-2 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Equipment for Stationary Use in Weatherprotected Locations - High Degree of Simulation-First Edition |
|
IEC 60706-5 |
Guide on Maintainability of Equipment - Part 5: Section 4: Diagnostic Testing-First Edition |
|
IEC 60721-2-4 |
Classification of environmental conditions Part 2-4: Environmental conditions appearing in nature Solar radiation and temperature-Edition 1.1; Edition 1: 1987 Consolidated with Amendment 1: 1988 |
|
IEC 60721-3-1 |
Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 1: Storage-Second Edition |
|
IEC 60721-3-5 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 5: Ground Vehicle Installations-Second Edition |
|
IEC 60955 |
Process Data Highway, Type C (PROWAY C), for Distributed Process Control Systems-First Edition; Amendment 1: 05-1992) |
|
IEC 61310-1 |
Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals-Edition 2.0 |
|
IEC TR 62390 |
Common automation device Profile guideline-First Edition |
|
IEC 60488-2 |
Standard digital interface for programmable instrumentation Part 2: Codes, formats, protocols and common commands-First Edition; IEEE 488.2; Replaces IEC 60625-2 |
|
IEC 60571 |
Electronic Equipment Used on Rail Vehicles-Edition 2.1; Consolidated Reprint |
|
IEC CISPR/TR 28 |
Industrial, Scientific and Medical Equipment (ISM) - Guidelines for Emission Levels Within the Bands Designated by the ITU-First Edition |
|
IEC TR 60785 |
Rotating Machines for Electric Road Vehicles-Edition 1 |
|
IEC TS 60695-5-2 |
Fire Hazard Testing Part 5-2: Corrosion Damage Effects of Fire Effluent Summary and Relevance of Test Methods-Second Edition |
|
IEC 60068-2-55 |
Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce-First Edition |
|
IEC 60317-0-2 |
Specifications for Particular Types of Winding Wires - Part 0-2: General Requirements - Enamelled Rectangular Copper Wire-Edition 2.2; Consolidated Reprint |
|
IEC 60621-5 |
Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 5: Operating requirements-First Edition |
|
IEC 60721-2-8 |
Classification of Environmental Conditions - Part 2: Environmental Conditions Appearing in Nature - Section 8: Fire Exposure-First Edition |
|
IEC 60773 |
Test Methods and Apparatus for the Measurement of the Operational Characteristics of Brushes First Edition-Bilingual; First Edition |
|
IEC 60851-2 |
Winding Wires - Test Methods - Part 2: Determination of Dimensions-Edition 2.1; Edition 2: 1996 Consolidated with Amendment 1: 1997; Amendment 2: 9/2003 |
|
IEC 61512-1 |
Batch Control - Part 1: Models and Terminology-First Edition |
|
IEC 62264-2 |
Enterprise-control system integration Part 2: Object model attributes-Edition 1 |
|
IEC 60068-2-59 |
Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine-Beat Method-First Edition |
|
IEC 60068-2-61 |
Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence-First Edition |
|
IEC 60068-2-81 |
Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis-First Edition |
|
IEC 60381-2 |
Analogue Signals for Process Control Systems Part 2: Direct Voltage Signals-First Edition |
|
IEC 60546-2 |
Controllers with Analogue Signals for Use in Industrial-Process Control Systems Part 2: Guidance for Inspection and Routine Testing-First Edition |
|
IEC 60721-2-3 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Air Pressure-First Edition |
|
IEC 61124 |
Reliability Testing - Compliance Tests for Constant Failure Rate and Constant Failure Intensity-Edition 2 |
|
IEC 61207-1 |
Expression of Performance of Gas Analyzers - Part 1: General-First Edition |
|
IEC 61375-1 |
Electric railway equipment - Train bus - Part 1: Train communication network-Edition 2.0 |
|
IEC 61499-4 |
Function blocks Part 4: Rules for compliance profiles-First Edition; Replaces IEC/PAS 61499-4: 2002 |
|
IEC 61588 |
Precision clock synchronization protocol for networked measurement and control systems-First Edition; Replaces IEEE 1588: 2002 |
|
IEC 62128-1 |
Railway applications Fixed installations Part 1: Protective provisions relating to electrical safety and earthing-First Edition |
|
IEC CISPR 21 |
Interference to Mobile Radiocommunications in the Presence of Impulsive Noise; Methods of Judging Degradation and Measures to Improve Performance-Second Edition |
|
IEC PAS 61512-3 |
Batch control Part 3: General and site recipe models and representation-First Edition |
|
IEC TR 60778 |
Brush-Holders for Slip-Rings Group R - Type RA-Edition 1 |
|
IEC TS 60695-7-51 |
Fire Hazard Testing - Part 7-51: Toxicity of Fire Effluent - Estimation of Toxic Potency: Calculation and Interpretation of Test Results-First Edition |
|
IEC 60068-2-53 |
Basic Environmental Testing Procedures Part 2: Tests Guidance to Tests Z/AFc and Z/BFc: Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests-First Edition |
|
IEC 60068-2-67 |
Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for Components-First Edition |
|
IEC 60317-16 |
Specifications for Particular Types of Winding Wires Part 16: Polyester Enamelled Rectangular Copper Wire, Class 155-Second Edition; Amendment 1-1997 |
|
IEC 60721-2-5 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 5: Dust, Sand, Salt Mist-First Edition |
|
IEC 60721-3-7 |
Classification of Environmental Conditions - Part 3-7: Classification of Groups of Environmental Parameters and Their Severities - Portable and Non-Stationary Use-Edition 2.1; Edition 2:1995 Consolidated with Amendment 1:1996 |
|
IEC 60851-4 |
Winding Wires - Test Methods - Part 4: Chemical Properties-Edition 2.2: Consolidated Reprint |
|
IEC 61515 |
Mineral Insulated Thermocouple Cables and Thermocouples-First Edition |
|
IEC 61709 |
Electronic Components - Reliability - Reference Conditions for Failure Rates and Stress Models for Conversion-First Edition |
|
IEC TR 60783 |
Wiring and Connectors for Electric Road Vehicles-Edition 1 |
|
IEC TR 60786 |
Controllers for Electric Road Vehicles-Edition 1 |
|
IEC TS 60695-8-2 |
Fire Hazard Testing - Part 8-2: Heat Release - Summary and Relevance of Test Methods-First Edition |
|
IEC TS 61804-1 |
Function blocks (FB) for process control Part 1: Overview of system aspects-First Edition; Replaces IEC PAS 61804-1 |
|
IEC 60068-2-45 |
Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents-First Edition; Erratum 1: 08/1981: Amendment 1: 02-1993 |
|
IEC 60068-2-66 |
Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour)-First Edition |
|
IEC 60068-2-70 |
Environmental Testing - Part 2: Tests - Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and Hands-First Edition |
|
IEC 60322 |
Railway Applications - Electric Equipment for Rolling Stock - Rules for Power Resistors of Open Construction-Second Edition |
|
IEC 60349-2 |
Electric Traction - Rotating Electrical Machines for Rail and Road Vehicles - Part 2: Electronic Convertor-Fed Alternating Current Motors-Second Edition |
|
IEC 60382 |
Analogue pneumatic signal for process control systems-Edition 2.0 |
|
IEC 60413 |
Test procedures for determining physical properties of brush materials for electrical machines-Edition 1.0 |
|
IEC 60605-3-3 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Section 3: Test Cycle 3: Equipment for Stationary Use in Partially Weatherprotected Locations - Low Degree of Simulation-First Edition |