|
IEC 60044- 1 |
Instrument transformers - Part 1: Current transformers-Edition 1.2; Edition 1:1996 Consolidated With Amendments 1:2000 and 2:2002 |
|
IEC 60044- 2 |
Instrument Transformers - Part 2: Inductive Voltage Transformers-Edition 1.2; Edition 1:1997 Consolidated With Amendments 1:2000 and 2:2002 |
|
IEC 60044- 3 |
Instrument transformers Part 3: Combined transformers-Second Edition |
|
IEC 60044- 5 |
Instrument transformers . Part 5: Capacitor voltage transformers-First Edition |
|
IEC 60044- 6 |
Instrument Transformers Part 6: Requirements for Protective Current Transformers for Transient Performance-First Edition |
|
IEC 60044- 7 |
Instrument Transformers - Part 7: Electronic Voltage Transformers-First Edition |
|
IEC 60044- 8 |
Instrument transformers - Part 8: Electronic current transformers-First Edition |
|
IEC 60052 |
Voltage measurement by means of standard air gaps-Third Edition |
|
IEC 60060- 1 |
High-Voltage Test Techniques Part 1: General Definitions and Test Requirements-Edition 2; Corrigendum: 03/1990; Corrigendum: 03/1992 |
|
IEC 60060- 2 |
High-Voltage Test Techniques Part 2: Measuring Systems-Second Edition; Amendment 1-1996; Replaces 60060-3: 1976 |
|
IEC 60110- 1 |
Power Capacitors for Induction Heating Installations - Part 1: General-First Edition; Supersedes IEC 60594 |
|
IEC 60127- 1 |
Miniature Fuses - Part 1: Definitions for Miniature Fuses and General Requirements for Miniature Fuse-Links-Edition 1.2; Edition 1: 1988 Consolidated with Amendment 1: 1999 and Amendment 2:2002 |
|
IEC 60127- 10 |
Miniature Fuses - Part 10: User Guide for Miniature Fuses-First Edition |
|
IEC 60127- 2 |
Miniature fuses - Part 2: Cartridge fuse-links-Edition 2.1; Edition 2:2003 consolidated with amendment 1:2003 |
|
IEC 60127- 3 |
Miniature fuses - Part 3: Sub-miniature fuse links-Second Edition; Amendment 1-1991; Corrigendum-10/1994; Corrigendum-06/1996; Amendment 2: 12/2002 |
|
IEC 60127- 4 |
Miniature fuses Part 4: Universal modular fuse-links (UMF) Through-hole and surface mount types-Third Edition |
|
IEC 60127- 5 |
Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links-First Edition |
|
IEC 60127- 6 |
Miniature fuses Part 6: Fuse-holders for miniature cartridge fuse-links- First Edition; Amendment 1: 1996; Amendment 2: 12/2002 |
|
IEC 60143- 1 |
Series Capacitors for Power Systems Part 1: General-Fourth Edition |
|
IEC 60143- 2 |
Series Capacitors for Power Systems - Part 2: Protective Equipment for Series Capacitor Banks-First Edition |
|
IEC 60143- 3 |
Series Capacitors for Power Systems - Part 3: Internal Fuses-First Edition |
|
IEC 60252- 1 |
AC Motor Capacitors - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation-First Edition; Replaces 60252 |
|
IEC 60252- 2 |
AC motor capacitors Part 2: Motor start capacitors-First Edition |
|
IEC 60255- 11 |
Electrical relays - Part 11: Interruptions to and alternating component (ripple) in d.c. auxiliary energizing quantity of measuring relays-First Edition |
|
IEC 60255- 12 |
Electrical Relays Part 12: Directional Relays and Power Relays with Two Input Energizing Quantities-First Edition |
|
IEC 60255- 13 |
Electrical Relays Part 13: Biased (Percentage) Differential Relays-First Edition |
|
IEC 60255- 16 |
Electrical relays - Part 16: Impedance measuring relays-First Edition |
|
IEC 60255-21- 1 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section One: Vibration tests (sinusoidal)-First Edition |
|
IEC 60255-21- 2 |
Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section Two: Shock and bump tests-First Edition |
|
IEC 60255- 3 |
Electrical relays - Part 3: Single input energizing quantity measuring relays with dependent or independent time-Second Edition; Corrigendum 1: 09-1992 |
|
IEC 60255- 6 |
Electrical relays - Part 6: Measuring relays and protection equipment- Second Edition |
|
IEC 60255- 8 |
Electrical relays - Part 8: Thermal electrical relays-Second Edition |
|
IEC 60265- 1 |
High-Voltage Switches - Part 1: Switches for Rated Voltages Above 1 kV and Less Than 52 kV-Third Edition; Corrigendum - 05 2000 |
|
IEC 60265- 2 |
High-Voltage Switches Part 2: High-Voltage Switches for Rated Voltages of 52 kV and Above-First Edition; Corrigendum-1990; Amendment 1-1994; Amendment 2- 1998 |
|
IEC 60269- 1 |
Low-Voltage Fuses - Part 1: General Requirements-Edition 3.1; Consolidated Reprint |
|
IEC 60269- 2 |
Low-Voltage Fuses Part 2: Supplementary Requirements for Fuses for Use by Authorized Persons (Fuses Mainly for Industrial Application)-Second Edition; Amendment 1:11/1995; Corrigendum 1:7/1996; Amendment 2: 11/2001 |
|
IEC 60269-2- 1 |
Low-voltage fuses Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) Sections I to VI: Examples of types of standardized fuses-Fourth Edition |
|
IEC 60269- 3 |
Low-voltage fuses Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications)-Second Edition; Amendment 1: 7/2003 |
|
IEC 60269-3- 1 |
Low-voltage fuses Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) Sections I to IV: Examples of types of standardized fuses-Second Edition |
|
IEC 60269- 4 |
Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices-Third Edition; Amendment 1-1995; Amendment 2: 10/ 2002; Corrigendum 1: 03/2003 |
|
IEC 60269-4- 1 |
Low-voltage fuses Part 4-1: Supplementary requirements for fuse-links for the protection of semiconductor devices Sections I to III: Examples of types of standardized fuse-links-First Edition |
|
IEC 60270 |
High-Voltage Test Techniques - Partial Discharge Measurements- Third Edition; Corrigendum 1, 10/2001 |
|
IEC 60282- 1 |
High-Voltage Fuses - Part 1: Current-Limiting Fuses-Sixth Edition |
|
IEC 60282- 2 |
High-Voltage Fuses - Part 2: Expulsion Fuses-Edition 2.1; Edition 2:1995 Consolidated with Amendment 1:1997 |
|
IEC 60291 |
Fuse Definitions-First Edition; Supplement A-1975 |
|
IEC 60358 |
Coupling Capacitors and Capacitor Dividers-Edition 2 |
|
IEC 60427 |
Synthetic Testing of High-Voltage Alternating Current Circuit- Breakers-Third Edition |
|
IEC 60439- 1 |
Low-voltage switchgear and controlgear assemblies Part 1: Type-tested and partially type-tested assemblies-Edition 4.1; Edition 4:1999 Consolidated with Amendment 1:2004; Corrigendum 1: 11/2004 |
|
IEC 60439- 2 |
Low-voltage switchgear and controlgear assemblies - Part 2: Particular requirements for busbar trunking systems (busways)-Edition 3.1 * Consolidated Reprint |
|
IEC 60439- 3 |
Low-Voltage Switchgear and Controlgear Assemblies - Part 3: Particular Requirements for Low-Voltage Switchgear and Controlgear Assemblies Intended to Be Installed in Places Where Unskilled Persons Have Access for Their Use - Distribution Boards- Edition 1. |
|
IEC 60439- 4 |
Low-Voltage Switchgear and Controlgear Assemblies - Part 4: Particular Requirements for Assemblies for Construction Sites (ACS)-Second Edition |
|
IEC 60439- 5 |
Low-Voltage Switchgear and Controlgear Assemblies - Part 5: Particular Requirements for Assemblies Intended to be Installed Outdoors in Public Places - Cable Distribution Cabinets (CDCs) for Power Distribution in Networks-Edition 1.1; Edition 1: 1996 Cons |
|
IEC 60466 |
A.C. Insulation-Enclosed Switchgear and Controlgear for Rated Voltages Above 1 kV and up to and Including 38 kV-Second Edition; Amendment 1:11/1994 |
|
IEC 60470 |
High-Voltage Alternating Current Contactors and Contactor-Based Motor-Starters-Second Edition; Cancels and Replaces IEC 60632-1 |
|
IEC 60549 |
High-Voltage Fuses for the External Protection of Shunt Power Capacitors-Edition 1 |
|
IEC 60644 |
Specification for High-Voltage Fuse-Links for Motor Circuit Applications-Edition 1 |
|
IEC 60691 |
Thermal-Links - Requirements and Application Guide-Third Edition |
|
IEC 60694 |
Common Specifications For High-Voltage Switchgear and Controlgear Standards-Edition 2.2; Consolidated with Amendment 1: 2000; Amendment 2: 07/2001 |
|
IEC 60715 |
Dimensions of Low-Voltage Switchgear and Controlgear Standardized Mounting on Rails for Mechanical Support of Electrical Devices in Switchgear and Controlgear Installations-Edition 1; Amendment 1:1995 |
|
IEC 60787 |
Application Guide for the Selection of Fuse-Links of High-Voltage Fuses for Transformer Circuit Applications-Bilingual; First Edition; Amendment 1-1985 |
|
IEC 60831- 1 |
Shunt Power Capacitors of the Self-Healing Type for A.C. Systems Having a Rated Voltage up to and Including 1 000 V - Part 1: General - Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation-Edition 2.1; Edition 2: 19 |
|
IEC 60831- 2 |
Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test, self-healing test and destruction test-Second Edition |
|
IEC 60871- 1 |
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 1: General-Third Edition |
|
IEC 60871- 4 |
Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 4: Internal Fuses-First Edition |
|
IEC 60931- 1 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 1: General Performance, testing and rating Safety requirements Guide for installation and operation-Second Edition; Amendm |
|
IEC 60931- 2 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test- Second Edition |
|
IEC 60931- 3 |
Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 3: Internal fuses-First Edition |
|
IEC 60932 |
Additional Requirements for Enclosed Switchgear and Controlgear from 1 kV to 72.5 kV to Be Used in Severe Climatic Conditions-First Edition |
|
IEC 60947- 1 |
Low-voltage switchgear and controlgear Part 1: General rules-Fourth Edition |
|
IEC 60947- 2 |
Low-Voltage Switchgear and Controlgear - Part 2: Circuit-Breakers-Third Edition |
|
IEC 60947- 3 |
Low-Voltage Switchgear and Controlgear - Part 3: Switches, Disconnectors, Switch-Disconnectors and Fuse-Combination Units-Edition 2.2; Consolidated Reprint |
|
IEC 60947-4- 1 |
Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor- Starters - Electromechanical Contactors and Motor-Starters-Edition 2.1; Edition 2:2000 Consolidated with Amendment 1: 2002; Amendment 2: 06/2005 |
|
IEC 60947-4- 2 |
Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and Motor- Starters - AC Semiconductor Motor Controllers and Starters-Edition 2.1; Edition 2: 1999 Consolidated with Amendment 1: 2001 |
|
IEC 60947-4- 3 |
Low-Voltage Switchgear and Controlgear Part 4-3: Contactors and Motor- Starters - AC Semiconductor Controllers and Contactors for Non-Motor Loads-First Edition; Corrigendum May 2000 |
|
IEC 60947-5- 1 |
Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements Electromechanical control circuit devices-Third Edition |
|
IEC 60947-5- 2 |
Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches-Edition 2:1997 Consolidated with Amendment 1:1999; Amendment 2: 2003 |
|
IEC 60947-5- 3 |
Low-Voltage Switchgear and Controlgear - Part 5-3: Control Circuit Devices and Switching Elements - Requirements for Proximity Devices with Defined Behaviour under Fault Conditions (PDF)-Edition 1.1 Consolidated Reprint; Should be Read in Conjunction with |
|
IEC 60947-5- 4 |
Low-voltage switchgear and controlgear Part 5-4: Control circuit devices and switching elements Method of assessing the performance of low-energy contacts Special tests-Second Edition |
|
IEC 60947-5- 5 |
Low-voltage switchgear and controlgear Part 5-5: Control circuit devices and switching elements Electrical emergency stop device with mechanical latching function- Edition 1.1 Consolidated Reprint |
|
IEC 60947-5- 6 |
Low-Voltage Switchgear and Controlgear - Part 5-6: Control Circuit Devices and Switching Elements - DC Interface for Proximity Sensors and Switching Amplifiers (NAMUR)-First Edition |
|
IEC 60947-5- 7 |
Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements Requirements for proximity devices with analogue output-First edition |
|
IEC 60947-6- 1 |
Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment Transfer switching equipment-Edition 2 |
|
IEC 60947-6- 2 |
Low-Voltage Switchgear and Controlgear - Part 6-2: Multiple Function Equipment - Control and Protective Switching Devices (or Equipment) (CPS)-Second Edition |
|
IEC 60947-7- 1 |
Low-Voltage Switchgear and Controlgear - Part 7-1: Ancillary Equipment - Terminal Blocks for Copper Conductors-Second Edition; Corrigendum 1: 03/2003 |
|
IEC 60947-7- 2 |
Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors-Second Edition |
|
IEC 60947-7- 3 |
Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks-First Edition; Corrigendum 1: 03/2003 |
|
IEC 60947- 8 |
Low-voltage switchgear and controlgear Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines-First Edition |
|
IEC 60996 |
Method for Verifying Accuracy of Tan Delta Measurements Applicable to Capacitors-First Edition |
|
IEC 60999- 2 |
Connecting devices Electrical copper conductors Safety requirements for screw-type and screwless-type clamping units Part 2: Particular requirements for clamping units for conductors above 35 mm2 up to 300 mm2 (included)-Second Edition |
|
IEC 61032 |
Protection of Persons and Equipment by Enclosures - Probes for Verification-Second Edition; Corrigendum 1: 1/2003 |
|
IEC 61071- 1 |
Power Electronic Capacitors Part 1: General-Edition 1 |
|
IEC 61071- 2 |
Power Electronic Capacitors - Part 2: Requirements for Disconnecting Test on Fuses, Destruction Test, Self-Healing Test and Endurance Test-Edition 1 |
|
IEC 61083- 1 |
Instruments and Software Used for Measurement in High-Voltage Impulse Tests - Part 1: Requirements for Instruments-Second Edition; Replaces IEC 60790 Ed. 1.0:1984 |
|
IEC 61083- 2 |
Digital Recorders for Measurements in High-Voltage Impulse Tests - Part 2: Evaluation of Software Used for the Determination of the Parameters of Impulse Waveforms- First Edition |
|
IEC 61095 |
Electromechanical Contactors for Household and Similar Purposes- Edition 1.1; Edition 1:1992 Consolidated with Amendment 1:2000 |
|
IEC 61117 |
Method for Assessing the Short-Circuit Withstand Strength of Partially Type-Tested Assemblies (PTTA)-First Edition |
|
IEC 61166 |
High-Voltage Alternating Current Circuit-Breakers - Guide for Seismic Qualification of High-Voltage Alternating Current Circuit-Breakers-First Edition |
|
IEC 61180- 1 |
High-Voltage Test Techniques for Low-Voltage Equipment Part 1: Definitions, Test and Procedure Requirements-Edition 1 |
|
IEC 61180- 2 |
High-Voltage Test Techniques for Low-Voltage Equipment - Part 2: Test Equipment-First Edition |
|
IEC 61270- 1 |
Capacitors for microwave ovens - Part 1: General-First Edition |
|
IEC 61330 |
High-Voltage/Low-Voltage Prefabricated Substations-First Edition |
|
IEC 61642 |
Industrial a.c. Networks Affected by Harmonics - Application of Filters and Shunt Capacitors-First Edition |
|
IEC 61921 |
Power capacitors Low-voltage power factor correction banks |
|
IEC 61958 |
High-Voltage Prefabricated Switchgear and Controlgear Assemblies - Voltage Presence Indicating Systems-First Edition |
|
IEC 62026- 1 |
Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 1: General Rules-First Edition |
|
IEC 62026- 2 |
Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 2: Actuator Sensor Interface (AS-i)-First Edition |
|
IEC 62026- 3 |
Low-Voltage Switchgear and Controlgear - Controller-Device Interface (CDIs) - Part 3: DeviceNet-First Edition |
|
IEC 62026- 5 |
Low-Voltage Switchgear and Controlgear - Controller-Device Interfaces (CDIs) - Part 5: Smart Distributed System (SDS)-First Edition |
|
IEC 62026- 6 |
Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 6: Seriplex (Serial Multiplexed Control Bus)-First Edition |
|
IEC 62208 |
Empty enclosures for low-voltage switchgear and controlgear assemblies General requirements and controlgear assemblies General requirements-First Edition |
|
IEC 62262 |
Degrees of Protection Provided by Enclosures for Electrical Equipment Against External Mechanical Impacts (IK Code)-First Edition |
|
IEC 62271- 100 |
High-Voltage Switchgear and Controlgear - Part 100: High-Voltage Alternating-Current Circuit-Breakers-Edition 1.1 ; Edition 1: 2001 Consolidated with Amendment 1: 2002; Replaces IEC 60056 Edition 4.0:1987 |
|
IEC 62271- 102 |
High-Voltage Switchgear and Controlgear - Part 102: Alternating current disconnectors and earthing switches-First Edition; Cancels and Replaces IEC 60129-1984, Amendment 1: 1992 and Amendment 2: 1996 and Replaces IEC 61128, IEC 61129 and IEC 61259; The co |
|
IEC 62271- 105 |
High-Voltage Switchgear and Controlgear - Part 105: Alternating Current Switch-Fuse Combustions-First Edition |
|
IEC 62271- 107 |
High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV-Edition 1 |
|
IEC 62271- 108 |
High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages of 72,5 kV and above- Edition 1 |
|
IEC 62271- 110 |
High-voltage switchgear and controlgear Part 110: Inductive load switching-Edition 1; Replaces IEC TS 61233: 1994 |
|
IEC 62271- 111 |
High voltage switchgear and controlgear Part 111: Overhead, pad- mounted, dry vault, and submersible automatic circuit reclosers and fault interrupters for alternating current systems up to 38 kV-Edition 1.0; Same as IEEE C37.60 |
|
IEC 62271- 2 |
High-voltage switchgear and controlgear Part 2: Seismic qualification for rated voltages of 72,5 kV and above-First Edition |
|
IEC 62271- 200 |
High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV-First Edition; Replaces IEC 60298:1990 |
|
IEC 62271- 203 |
High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV-Replaces IEC 60517:1990 |
|
IEC CISPR 18- 1 |
Radio Interference Characteristics of Overhead Power Lines and High- Voltage Equipment Part 1: Description of Phenomena-First Edition |
|
IEC CISPR 18- 2 |
Radio Interference Characteristics of Overhead Power Lines and High- Voltage Equipment - Part 2: Methods of Measurement and Procedure for Determining Limits- First Edition; Amendment 1: 4/1993; Amendment 2: 12/1996 |
|
IEC CISPR 18- 3 |
Radio Interference Characteristics of Overhead Power Lines and High- Voltage Equipment - Part 3: Code of Practice for Minimizing the Generation of Radio Noise- First Edition; Amendment 1: 5/1996 |
|
IEC PAS 62271- 109 |
High-Voltage Switchgear and Controlgear - Part 109: Alternating-Current Series Capacitor By-Pass Switches-Edition 1.0 |
|
IEC TR 60871- 3 |
Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V - Part 3: Protection of shunt capacitors and shunt capacitor banks-First Edition |
|
IEC TR 60890 |
A Method of Temperature-rise Assessment by Extrapolation for Partially Type-Tested Assemblies (PTTA) of Low-Voltage Switchgear and Controlgear-First Edition; Amendment 1: 02-1995 |
|
IEC TR 60943 |
Guidance concerning the permissible temperature rise for parts of electrical equipment, in particular for terminals-Second Edition |
|
IEC TR 61459 |
Low-Voltage Fuses - Coordination between Fuses and Contactors/Motor-Starters - Application Guide-First Edition; Corrigendum 1: 2/2001 |
|
IEC TR 61633 |
High-Voltage Alternating Current Circuit-Breakers - Guide for Short- Circuit and Switching Test Procedures for Metal-Enclosed and Dead Tank Circuit-Breakers- Edition 1 |
|
IEC TR 61634 |
High-Voltage Switchgear and Controlgear - Use and Handling of Sulphur Hexafluoride (SF6) in High-Voltage Switchgear and Controlgear-Edition 1 |
|
IEC TR 61639 |
Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages of 72,5 kV and above-First Edition |
|
IEC TR 61640 |
Rigid High-Voltage, Gas-Insulated Transmission Lines for Rated Voltage of 72,5 kV and Above-First Edition |
|
IEC TR 61641 |
Enclosed Low Voltage Switchgear and Controlgear Assemblies - Guide for Testing under Conditions of Arcing Due to Internal Fault-Edition 1 |
|
IEC TR 61818 |
Application guide for low-voltage fuses-First Edition |
|
IEC TR 61912 |
Application of the short-circuit ratings of low-voltage switchgear and controlgear-Edition 1 |
|
IEC TR 62063 |
High-Voltage Switchgear and Controlgear - The Use of Electronic and Associated Technologies in Auxiliary Equipment of Switchgear and Controlgear-Edition 1 |
|
IEC TR 62271- 301 |
High-voltage switchgear and controlgear Part 301: Dimensional standardisation of terminals-First Edition |
|
IEC TR 62271- 308 |
High-Voltage Switchgear and Controlgear - Part 308: Guide for Asymmetrical Short-Circuit Breaking Test Duty T100a-First Edition |
|
IEC TR 62271- 310 |
High-voltage switchgear and controlgear . Part 310: Electrical endurance testing for circuit-breakers of rated voltage 72,5 kV and above-First Edition |
|
IEC TS 60110- 2 |
Power Capacitors for Induction Heating Installations - Part 2: Ageing Test, Destruction Test and Requirements for Disconnecting Internal Fuses-First Edition |
|
IEC TS 60859 |
Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 72,5 kV and Above - Fluid-Filled and Extruded Insulation Cables - Fluid- Filled and Dry Type Cable-Terminations-Second Edition; Corrigendum: 02-2000; Corrigendum: 12-2000 |
|
IEC TS 60871- 2 |
Shunt Capacitors for a.c. Power Systems Having a Rated Voltage Above 1 000 V - Part 2: Endurance Testing-Second Edition |
|
IEC TS 61915 |
Low-voltage switchgear and controlgear Principles for the development of device profiles for networked industrial devices-First Edition |
|
IEC TS 62091 |
Low-voltage switchgear and controlgear Controllers for drivers of stationary fire pumps-First Edition |