IEC - International Electrotechnical Commission - Components Collection

IEC 60404-13

Magnetic Materials - Part 13: Methods of Measurement of Density, Resistivity and Stacking Factor of Electrical Steel Sheet and Strip-First Edition

IEC 60404-8-10

Magnetic Materials - Part 8: Specifications for Individual Materials - Section 10: Specification for Magnetic Materials (Iron and Steel) for Use in Relays-First Edition

IEC 60404-8-7

Magnetic Materials - Part 8-7: Specifications for Individual Materials - Cold-Rolled Grain-Oriented Electrical Steel Sheet and Strip Delivered in the Fully-Processed State-Second Edition

IEC 60721-2-7

Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Fauna and Flora-First Edition

IEC 60793-1-31

Optical Fibres - Part 1-31: Measurement Methods and Test Procedures - Tensile Strength-First Edition

IEC 60793-1-42 CORR 1

Optical fibres – Part 1-42: Measurement methods and test procedures – Chromatic dispersion CORRIGENDUM 1-Edition 2.0

IEC 60793-2-40

Optical fibres – Part 2-40: Product specifications – Sectional specification for category A4 multimode fibres-Edition 2.0

IEC 60874-10-1

Connectors for Optical Fibres and Cables - Part 10-1: Detail Specification for Fibre Optic Connector Type BFOC/2,5 Terminated to Multimode Fibre Type A1-First Edition; QC 910003XX0001

IEC 60874-14-9

Connectors for Optical Fibres and Cables - Part 14-9: Fibre Optic Connector Type SC-APC Tuned 8 Degrees Terminated on Single Mode Fibre Type B1 - Detail Specification-First Edition

IEC 61156-5

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5: Symmetrical Pair/Quad Cables with Transmission Characteristics Up to 600 MHz - Horizontal Floor Wiring - Sectional Specification-First Edition

IEC TR 61282-2

Fibre optic communication system design guides Part 2: Multimode and single-mode Gbit/s applications Gigabit ethernet model-First Edition

IEC TR 61282-3

Fibre optic communication system design guides – Part 3: Calculation of link polarization mode dispersion-Edition 2

IEC 60068-2-48

Basic Environmental Testing Procedures Part 2: Tests Guidance on the Application of the Tests of IEC Publication 68 to Simulate the Effects of Storage-First Edition

IEC 60068-3-4

Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-First Edition; Replaces and Cancels IEC 60068-2-28: 1990

IEC 60115-1

Fixed resistors for use in electronic equipment - Part 1: Generic specification-Edition 3.1; Edition 3:1999 Consolidated with Amendment 1:2001

IEC 60404-3

Magnetic materials Part 3: Methods of measurement of the magnetic properties of magnetic sheet and strip by means of a single sheet tester-Edition 2.1; Edition 2:1992 Consolidated with Amendment 1:2002

IEC 60404-6

Magnetic materials Part 6: Methods of measurement of the magnetic properties of magnetically soft metallic and powder materials at frequencies in the range 20 Hz to 200 kHz by the use of ring specimens-Second Edition

IEC 60738-1-3

Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-3: Blank Detail Specification - Inrush Current Application - Assessment Level EZ-First Edition; IECQ QC 440003

IEC 60793-1-49

Optical fibres – Part 1-49: Measurement methods and test procedures – Differential mode delay-Edition 2.0

IEC 60874-10-2

Connectors for Optical Fibres and Cables - Part 10-2: Detail Specification for Fibre Optic Connector Type BFOC/2,5 Terminated to Single-Mode Fibre Type B1-First Edition; QC 910003XX0002

IEC 61156-2

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2: Horizontal Floor Wiring - Sectional Specification-Second Edition

IEC 61196-1-102

Coaxial communication cables Part 1-102: Electrical test methods Test for insulation resistance of cable dielectric Numéro de référence Reference number CEI/IEC 61196-1-102:2005-Edition 1

IEC 61196-1-103

Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable-Edition 1

IEC 61290-1-1

Optical amplifiers – Test methods – Part 1-1: Power and gain parameters – Optical spectrum analyzer method-Edition 2.0

IEC 61290-3-2

Optical Amplifiers - Part 3-2: Test Methods for Noise Figure Parameters - Electrical Spectrum Analyzer Method-First Edition

IEC 61754-2

Fibre Optic Connector Interfaces - Part 2: Type BFOC/2,5 Connector Family-First Edition

IEC 61754-7

Fibre optic connector interfaces – Part 7: Type MPO connector family-Second Edition

IEC 62149-3

Fibre optic active components and devices Performance standards Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters-First Edition

IEC TR 62222

Fire performance of communication cables installed in buildings-First Edition

IEC 60068-2-40

Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests-First Edition; Amendment 1: 07-1983

IEC 60068-2-46

Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kd: Hydrogen Sulphide Test for Contacts and Connections-First Edition

IEC 60096-4-1

Radio-Frequency Cables Part 4: Specification for Superscreened Cables Section 1 - General Requirements and Test Methods-First Edition

IEC 60384-2

Fixed capacitors for use in electronic equipment – Part 2: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors-Edition 3; Same As IECQ QC 300400

IEC 60404-7

Magnetic Materials Part 7: Method of Measurement of the Coercivity of Magnetic Materials in an Open Magnetic Circuit-First Edition

IEC 60404-8-6

Magnetic materials – Part 8-6: Specifications for individual materials - Soft magnetic metallic materials-Edition 2.1; Consolidated Reprint

IEC 60425

Guide for the choice of colours to be used for the marking of capacitors and resistors-Edition 1.0

IEC 60636

Flexible Waveguide Assembly Performance First Edition-Edition 1

IEC 60721-3-9

Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 9: Microclimates Inside Products-First Edition; Amendment 1: 12/1994; Corrigendum 1: 1/1995

IEC 60793-1-32

Optical Fibres - Part 1-32: Measurement Methods and Test Procedures - Coating Strippability-First Edition; Together with the Other Standards in the IEC 60793-1-3X Series, Cancels and Replaces the Second Edition of IEC 60793-1-3

IEC 60794-3-21

Optical fibre cables – Part 3-21: Outdoor cables - Detailed specification for optical self-supporting aerial telecommunication cables for use in premises cabling-Edition 1

IEC 60874-10-3

Connectors for Optical Fibres and Cables - Part 10-3: Detail Specification for Fibre Optic Adaptor Type BFOC/2,5 for Single and Multimode Fibre-First Edition; QC 910003XX0003

IEC 60874-14-2

Connectors for Optical Fibres and Cables - Part 14-2: Detail Specification for Fibre Optic Connector Type SC-PC Standard Terminated to Single-Mode Fibre Type B1-First Edition; QC 910004XX0002

IEC 60874-14-4

Connectors for Optical Fibres and Cables - Part 14-4: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Multimode Fibre-First Edition; QC 910004XX0004

IEC 60966-1

Radio Frequency and Coaxial Cable Assemblies - Part 1: General Specification - General Requirements and Test Methods-Second Edition; IECQ QC 140000

IEC 61280-2-5

Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-5: Test Procedures for Digital Systems - Jitter Transfer Function Measurement-First Edition

IEC 61290-10-2

Optical Amplifiers - Test Methods - Part 10-2: Multichannel Parameters - Pulse Method Using a Gated Optical Spectrum Analyzer-First Edition

IEC 61290-1-3

Optical amplifiers – Test methods – Part 1-3: Power and gain parameters – Optical power meter method-Edition 2

IEC 61290-5-1

Optical amplifiers – Test methods – Part 5-1: Reflectance parameters – Optical spectrum analyzer method-Edition 2.0

IEC 61753-051-3

Fibre Optic Interconnecting Devices and Passive Components Performance Standard - Part 051-3: Single-Mode Fibre, Plug-Style Fixed Attenuators for Category U - Uncontrolled Environment-Edition 1

IEC 61754-6

Fibre Optic Connector Interfaces - Part 6: Type MU Connector Family-Edition 1.2; Consolidated Reprint

IEC 61811-10

Electromechanical elementary relays of assessed quality Part 10: Sectional specification Relays for industrial application-First Edition

IEC 61811-11

Electromechanical elementary relays of assessed quality Part 11: Blank detail specification Relays for industrial application-First Edition

IEC 61811-51

Electromechanical All-Or-Nothing Relays - Part 51: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Non-Standardized Types and Construction-Second Edition; IECQ QC 160501

IEC 61811-53

Electromechanical All-or-Nothing Relays - Part 53: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Two Change-Over Contacts, 14 mm x 9 mm Base-Second Edition; IECQ QC 160503

IEC 61811-55 CORR 1

Electromechanical all-or-nothing relays – Part 55: Blank detail specification – Electromechanical all-or-nothing telecom relays of assessed quality – Two change-over contacts, 11 mm × 7,5 mm (max.) base CORRIGENDUM 1-Second Edition; IECQ QC 160505

IEC 62037

RF Connectors, Connector Cable Assemblies and Cables - Intermodulation Level Measurement-First Edition

IEC 62134-1

Fibre Optic Enclosures - Part 1: Generic Specification

IEC 62148-3

Fibre optic active components and devices Package and interface standards Part 3: SFF MT-RJ 20-pin transceivers-First Edition

IEC 62148-4

Fibre optic active components and devices Package and interface standards Part 4: PN 1 9 plastic optical transceivers-First edition

IEC TR 61282-7

Fibre Optic Communication System Design Guides - Part 7: Statistical Calculation of Chromatic Dispersion-First Edition

IEC TR 61292-2

Optical Amplifier Technical Reports - Part 2: Theoretical Background for Noise Figure Evaluation Using the Electrical Spectrum Analyzer-First Edition

IEC 60068-2-69

Environmental testing – Part 2-69: Tests – Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method-Edition 2.0

IEC 60105

Recommendation for Commercial-Purity Aluminium Busbar Material-Edition 1

IEC 60195

Method of Measurement of Current Noise Generated in Fixed Resistors-First Edition

IEC 60404-14

Magnetic Materials - Part 14: Methods of Measurement of the Magnetic Dipole Moment of a Ferromagnetic Material Specimen by the Withdrawal or Rotation Method-First Edition

IEC 60404-4

Magnetic Materials - Part 4: Methods of Measurement of d.c. Magnetic Properties of Magnetically Soft Materials-Edition 2.1; Consolidated with Amendment 1

IEC 60404-5 AMD 1

Magnetic Materials - Part 5: Permanent Magnet (Magnetically Hard) Materials - Methods of Measurement of Magnetic Properties-Edition 2.0

IEC 60404-8-4

Magnetic Materials - Part 8-4: Specifications for Individual Materials - Cold-Rolled Non-Oriented Electrical Steel Sheet and Strip Delivered in the Fully-Processed State-Second Edition

IEC 60539-2

Directly heated negative temperature coefficient thermistors Part 2: Sectional specification Surface mount negative temperature coefficient thermistors-First Edition

IEC 60793-1-33

Optical Fibres - Part 1-33: Measurement Methods and Test Procedures - Stress Corrosion Susceptibility-First Edition; Together with the Other Standards in the IEC 60793-1-3X Series, Cancels and Replaces the Second Edition of IEC 60793-1-3

IEC 60793-1-45

Optical Fibres - Part 1-45: Measurement Methods and Test Procedures - Mode Field Diameter-First Edition; Corrigendum 1:7/2002; Together with the Other Standards in the IEC 60793-1-4X Series, Replaces the Second Edition of IEC 60793-1-4

IEC 60793-1-52

Optical Fibres - Part 1-52: Measurement Methods and Test Procedures - Change of Temperature-First Edition

IEC 60869-1

Fibre Optic Attenuators - Part 1: Generic Specification-Third Edition; IECQ QC 800000

IEC 60874-14-5

Connectors for Optical Fibres and Cables - Part 14-5: Detail Specification for Fibre Optic Connector Type SC-PC Untuned Terminated to Single-Mode Fibre Type B1-First Edition; QC 910004XX0005

IEC 60874-14-7

Connectors for Optical Fibres and Cables - Part 14-7: Detail Specification for Fibre Optic Connector Type SC-APC 9 Degrees Tuned Terminated to Single-Mode Fibre Type B1-First Edition; QC 910004XX0007

IEC 61202-1

Fibre Optic Isolators - Part 1: Generic Specification-Second Edition; IECQ QC 830000

IEC 61280-2-4

Fibre Optic Communication Subsystem Basic Test Procedures - Part 2-4: Test Procedures for Digital Systems - Bit-Rate Tolerance Measurement-First Edition

IEC 61290-1-2

Optical amplifiers – Test methods – Part 1-2: Power and gain parameters – Electrical spectrum analyzer method-Edition 2; Supersedes IEC 61290-2-2: 1998

IEC 61290-3

Optical Fibre Amplifiers Basic Specification Part 3: Test Methods for Noise Figure Parameters-First Edition

IEC 61290-5-2

Optical amplifiers Test methods Part 5-2: Reflectance parameters Electrical spectrum analyser method-First Edition

IEC 61300-2-37

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-37: Tests – Cable bending for fibre optic closures-Edition 2

IEC 61300-2-9

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock-First Edition

IEC 61300-3-12

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-12: Examinations and Measurements - Polarization Dependence of Attenuation of a Single-Mode Fibre Optic Component: Matrix Calculation Method-First Edition

IEC 61300-3-13

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch-First Edition

IEC 61726

Cable Assemblies, Cables, Connectors and Passive Microwave Components - Screening Attenuation Measurement by the Reverberation Chamber Method-Second Edition

IEC 61811-52

Electromechanical All-Or-Nothing Relays - Part 52: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Two Change-Over Contacts, 20 mm x 10 mm Base-Second Edition; IECQ QC 160502

IEC 61811-54

Electromechanical All-Or-Nothing Relays - Part 54: Blank Detail Specification - Electromechanical All-or-Nothing Telecom Relays of Assessed Quality - Two Change-Over Contacts, 15 mm x 7,5 mm Base-Second Edition; IECQ QC 160504

IEC 62148-10

Fibre optic active components and devices Package and interface standards Part 10: SFF MU duplex 20-pin transceivers-First Edition

IEC 62149-6

Fibre optic active components and devices Performance standards Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers-First Edition

IEC 62255-1

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 1: Generic specification-Edition 1

IEC 60115-2-1

Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail Specification: Fixed Low-Power Non-Wirewound Resistors Assessment Level E-First Edition;

IEC 60169-1-3

Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods Section Three - Electrical Tests and Measuring Procedures: Screening Effectiveness-First Edition; Amendment 1-1996

IEC 60539-1

Directly Heated Negative Temperature Coefficient Thermistors - Part 1: Generic Specification-First Edition; IECQ QC 430000

IEC 60793-1-43

Optical Fibres - Part 1-43: Measurement Methods and Test Procedures - Numerical Aperture-First Edition

IEC 60793-1-48

Optical fibres Part 1-48: Measurement methods and test procedures - Polarization mode dispersion-Edition 2.0

IEC 60793-1-51

Optical Fibres - Part 1-51: Measurement Methods and Test Procedures - Dry Heat-First Edition; Together with the Other Standards in the IEC 60793-1-5X Series, Cancels and Replaces the First Edition of IEC 60793-1-5

IEC 60793-1-53

Optical Fibres - Part 1-53: Measurement Methods and Test Procedures - Water Immersion-First Edition

IEC 60803

Recommended Dimensions for Hexagonal and Square Crimping-Die Cavities, Indentors, Gauges, Outer Conductor Crimp Sleeves and Centre Contact Crimp Barrels for R.F. Cables and Connectors-Edition 1; Amendment 1: 11/1995

IEC 60874-17

Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock)-First Edition; Same as IECQ QC 211300; Corrigendum: 05/1996

IEC 60874-19-2

Connectors for Optical Fibres and Cables - Part 19-2: Fibre Optic Adaptor (Duplex) Type SC for Single-Mode Fibre Connectors - Detail Specification-First Edition

IEC 60939-2-1

Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ)-First Edition

IEC 61156-2-1

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2-1: Horizontal Floor Wiring - Blank Detail Specification-Second Edition

IEC 61300-2-12

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact-Edition 2

IEC 61751

Laser Modules Used for Telecommunication - Reliability Assessment-First Edition

IEC 62005-2

Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 2: Quantitative Assessment of Reliability Based on Accelerated Ageing Tests - Temperature and Humidity; Steady State-First Edition

IEC 62148-1

Fibre Optic Active Componets and Devices - Package and Interface Standards - Part 1: General and Guidance-First Edition

IEC 62148-11

Fibre optic active components and devices Package and interface standards Part 11: 14-pin modulator-integrated laser diode transmitters-First Edition

IEC 62153-1-1

Metallic communication cables test methods Part 1-1: Electrical Measurement of the pulse/step return loss in the frequency domain using the Inverse Discrete Fourier Transformation (IDFT)-First Edition; Replaces IEC PAS 62260

IEC 62319-1-1

Polymeric thermistors Directly heated positive step function temperature coefficient Part 1-1: Blank detail specification Current limiting application-Edition 1

IEC PAS 62255-1

Pre-Standard; Multi-Pair Cables Used in High Bit Rate Digital Access Telecommunication Networks - Part 1: Outdoor Cables-Edition 1.0

IEC TR 61282-4

Fibre optic communication system design guides Part 4: Accommodation and utilization of non-linear effects-First Edition

IEC TR 61282-5

Fibre Optic Communication System Design Guides - Part 5: Accommodation and Compensation of Dispersion-First Edition

IEC TR 61292-1

Fibre Optics - Parameters of Amplifier Components-First Edition

IEC TR 61292-3

Optical amplifiers Part 3: Classification, characteristics and applications-First Edition

IEC TR 61292-4

Optical amplifiers Part 4: Maximum permissible optical power for the damage-free and safe use of optical amplifiers, including Raman amplifiers-First Edition

IEC TR 61292-5

Optical amplifiers Part 5: Polarization mode dispersion parameter General information-First Edition

IEC TR 62064

Radio-Frequency Cables - Relationship between Surface Transfer Impedance and Screening Attenuation (A Background to the Recommended Limits Contained in IEC 61196-1, Clause 14)-First Edition

IEC TR 62240

Process management for avionics Use of semiconductor devices outside manufacturers´ specified temperature range-First Edition: Supersedes IEC PAS 62240: 2001

IEC TR 62283

Nuclear Radiation - Fibre Optic Guidance-Edition 1

IEC 60068-2-44

Environmental Testing - Part 2: Tests - Guidance on Test T: Soldering-Second Edition; Corrigendum 1: 08/1995

IEC 60068-2-49

Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kc: Sulphur Dioxide Test for Contacts and Connections-First Edition

IEC 60068-2-50

Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens-First Edition

IEC 60068-2-51

Basic Environmental Testing Procedures Part 2: Tests Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens-First Edition

IEC 60068-3-6

Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers-First Edition; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-7

IEC 60068-4

Basic Environmental Testing Procedures Part 4: Information for Specification Writers - Test Summaries-First Edition; Amendment 1: 02-1992; Amendment 2: 03-1994

IEC 60114

Recommendation for Heat-Treated Aluminium Alloy Busbar Material of the Aluminium-Magnesium-Silicon Type-Edition 1; Corrigendum 1

IEC 60793-1-34

Optical fibres – Part 1-34: Measurement methods and test procedures – Fibre curl-Edition 2.0

IEC 60793-1-41

Optical Fibres - Part 1-41: Measurement Methods and Test Procedures - Bandwidth-Second Edition

IEC 60793-1-44

Optical Fibres - Part 1-44: Measurement Methods and Test Procedures - Cut-Off Wavelength-First Edition

IEC 60793-1-47

Optical fibres – Part 1-47: Measurement methods and test procedures – Macrobending loss-Edition 2.0

IEC 60793-1-50

Optical Fibres - Part 1-50: Measurement Methods and Test Procedures - Damp Heat (Steady State)-First Edition

IEC 61196-1-105

Coaxial communication cables Part 1-105: Electrical test methods Test for withstand voltage of cable dielectric-Edition 1

IEC 61196-3-2

Radio Frequency Cables - Part 3-2: Coaxial Cables for Digital Communication in Horizontal Floor Wiring - Detail Specification for Coaxial Cables with Solid Dielectric for Local Area Networks of 185 m Reach and Up to 10 Mb/s-First Edition

IEC 61290-5-3

Optical Fibre Amplifiers - Basic Specification - Part 5-3: Test Methods for Reflectance Parameters - Reflectance Tolerance Using an Electrical Spectrum Analyser-First Edition

IEC 61315

Calibration of fibre-optic power meters-Edition 2

IEC 61754-4

Fibre Optic Connector Interfaces - Part 4: Type SC Connector Family-Edition 1.2; Edition 1:1997 Consolidated with Amendments 1:1999; and 2:2001

IEC 62148-7

Fibre optic active components and devices Package and interface standards Part 7: SFF LC 10-pin transceivers-First Edition

IEC 62148-9 CORR 1

Fibre optic active components and devices – Package and interface standards – Part 9: SFF MU duplex 10-pin transceivers CORRIGENDUM 1-First Edition

IEC 62150-1

Fibre optic active components and devices Test and measurement procedures Part 1: General and guidance-Edition 1

IEC 62153-4-2

Metallic communication cables test methods Part 4-2: Electromagnetic compatibility (EMC) Screening and coupling attenuation Injection clamp method-First Edition

IEC PAS 61300-3-35

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-35: Examination and Measurements - Fibre Optic Cylindrical Connector Endface Visual Inspection-Edition 1.0

IEC TR 61282-6

Fibre optic communication system design guides Part 6: Skew design in parallel optical interconnection systems-First Edition

IEC 60068-2-41

Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests-First Edition; Amendment 1: 07-1983

IEC 60068-3-1

Basic Environmental Testing Procedures Part 3: Background Information Section One - Cold and Dry Heat Tests-First Edition

IEC 60068-5-2

Environmental Testing Part 5: Guide to Drafting of Test Methods - Terms and Definitions-First Edition

IEC 60115-2

Fixed Resistors for Use in Electronic Equipment Part 2: Sectional Specification: Fixed Low-Power Non-Wirewound Resistors-Second Edition;

IEC 60115-4-102

Fixed Resistors for Use in Electronic Equipment Part 4: Detail Specification: Fixed Power Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 1 % - Assessment Level E First Edition; (IECQ QC 400201XX0002)-First Edition;

IEC 60115-6-1

Fixed Resistors for Use in Electronic Equipment Part 6: Blank Detail Specification: Fixed Resistor Networks with Individually Measurable Resistors, All of Equal Value and Equal Dissipation Assessment Level E-First Edition;

IEC 60153-1

Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods-First Edition

IEC 60169-1

Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods-Second Edition; Amendment 1: 01-1996

IEC 60246

Connecting Wires Having a Rated Voltage of 20 kV and 25 kV D.C. and a Maximum Working Temperature of 105 Degrees C for Use in Television Receivers-First Edition

IEC 60404-12

Magnetic Materials Part 12: Guide to Methods of Assessment of Temperature Capability of Interlaminar Insulation Coatings-First Edition

IEC 60404-8-8

Magnetic Materials Part 8: Specifications for Individual Materials Section 8 - Specification for Thin Magnetic Steel Strip for Use at Medium Frequencies-First Edition

IEC 60404-8-9

Magnetic Materials Part 8: Specification for Individual Materials Section 9: Standard Specification for Sintered Soft Magnetic Materials-First Edition

IEC 60719

Calculation of the Lower and Upper Limits for the Average Outer Dimensions of Cables with Circular Copper Conductors and of Rated Voltages up to and Including 450/750 V-Edition 2; CENELEC EN 60719: 1993

IEC 60874-14-10

Connectors for Optical Fibres and Cables - Part 14-10: Fibre Optic Pigtail or Patch Cord Connector Type SC-APC Untuned 8 Degrees Terminated on Single Mode Fibre Type B1 - Detail Specification-First Edition

IEC 60876-1

Fibre Optic Spatial Switches - Part 1: Generic Specification-Third Edition; QC 820000

IEC 60938-1

Fixed inductors for electromagnetic interference suppression – Part 1: Generic specification-Edition 2.1; Consolidated Reprint

IEC 61156-3

Multicore and symmetrical pair/quad cables for digital communications Part 3: Work area wiring Sectional specification-Second Edition

IEC 61156-3-2

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 1-2: Work Area Wiring - Capability Approval - Sectional Specification-First Edition

IEC 61156-4

Multicore and symmetrical pair/quad cables for digital communications Part 4: Riser cables Sectional specification-Second Edition

IEC 61196-1-100

Coaxial communication cables Part 1-100: Electrical test methods General requirements-Edition 1

IEC 61196-1-107

Coaxial communication cables Part 1-107: Electrical test methods Test for cable microphony charge level (mechanically induced noise)-Edition 1

IEC 61196-3

Radio-Frequency Cables - Part 3: Sectional Specification for Coaxial Cables for Local Area Networks-First Edition

IEC 61232

Aluminium-Clad Steel Wires for Electrical Purposes-First Edition

IEC 61300-2-14

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-14: Tests - Maximum Input Power-Edition 2

IEC 61300-2-18

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance-Edition 2

IEC 61300-2-2

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-2: Tests – Mating durability-Second Edition

IEC 61300-3-21

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-21: Examinations and Measurements - Switching Time and Bounce Time-First Edition

IEC 61300-3-9

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-9: Examinations and Measurements - Far-End Crosstalk-First Edition

IEC 61753-061-3

Fibre optic interconnecting devices and passive components performance standard Part 061-3: Single mode fibre optic pigtailed style isolators for category U Uncontrolled environment-First Edition

IEC 61754-1

Fibre Optic Connector Interfaces - Part 1: General and Guidance-First Edition

IEC 61754-5

Fibre Optic Connector Interfaces - Part 5: Type MT Connector Family-Second Edition

IEC 62148-12

Fibre optic active components and devices Package and interface standards Part 12: Laser transmitters with a coaxial RF connector-First Edition

IEC 62148-5

Fibre optic active components and devices Package and interface standards Part 5: SC 1x9 fibre optic modules-First Edition

IEC 62148-8

Fibre optic active components and devices Package and interface standards Part 8: SFF LC 20-pin transceivers-First Edition

IEC 62319-1

Polymeric thermistors Directly heated positive step function temperature coefficient Part 1: Generic specification-Edition 1

IEC PAS 61753-081-2

Fibre optic interconnecting devices and passive components performance standard Part 081-2: Non-connectorized single-mode fibre optic middle-scale 1 N DWDM devices for category C Controlled environments-Edition 1

IEC TR 60649

Calculation of Maximum External Diameter of Cables for Indoor Installations First Edition-Edition 1.0

IEC TR 61930

Fibre Optic Graphical Symbology-First Edition

IEC 60068-2-39

Basic Environmental Testing Procedures Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure, and Damp Heat Test-First Edition

IEC 60068-3-5

Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers-First Edition; Should Be Read in Conjunction with IEC 60068-3-6 and IEC 60068-3-7

IEC 60068-3-7

Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (with Load)-First Edition; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-6

IEC 60068-3-8

Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests-First Edition

IEC 60153-2

Hollow Metallic Waveguides Part 2: Relevant Specifications for Ordinary Rectangular Waveguides-Second Edition

IEC 60169-3

Radio-Frequency Connectors Part 3: Two Pin Connector for Twin Balanced Aerial Feeders-First Edition

IEC 60384-17

Fixed capacitors for use in electronic equipment – Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors-Edition 2; Same As IECQ QC 301300

IEC 60404-1

Magnetic Materials - Part 1: Classification-Second Edition

IEC 60404-11

Magnetic Materials - Part 11: Method of Test for the Determination of Surface Insulation Resistance of Magnetic Sheet and Strip-Edition 1.1; Edition 1:1991 Consolidated with Amendment 1: 1998

IEC 60404-8-5

Magnetic Materials Part 8: Specifications for Individual Materials Section Five - Specification for Steel Sheet and Strip with Specified Mechanical Properties and Magnetic Permeability-First Edition

IEC 60468

Method of Measurement of Resistivity of Metallic Materials-Edition 1

IEC 60874-19-1 CORR 1

Connectors for optical fibres and cables – Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b – Detail specification CORRIGENDUM 1-Second Edition

IEC 60938-2

Fixed inductors for electromagnetic interference suppression Part 2: Sectional specification-Edition 2.1; Consolidated Reprint

IEC 61196-1-101

Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable-Edition 1

IEC 61196-1-104

Coaxial communication cables Part 1-104: Electrical test methods Test for capacitance stability of cable-Edition 1

IEC 61196-1-108

Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity-Edition 1

IEC 61196-1-111

Coaxial communication cables Part 1-111: Electrical test methods Test for stability of phase constant-Edition 1

IEC 61290-11-1

Optical amplifier test methods Part 11-1: Polarization mode dispersion Jones matrix eigenanalysis method (JME)-First Edition

IEC 61290-7-1

Optical amplifiers – Test methods – Part 7-1: Out-of-band insertion losses – Filtered optical power meter method-Edition 2.0

IEC 61300-3-1

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-1: Examinations and measurements - Visual examination-Edition 2

IEC 61300-3-20

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-20: Examinations and Measurements - Directivity of Fibre Optic Branching Devices-First Edition

IEC 61300-3-3

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and Return Loss-Second Edition

IEC 62007-1

Semiconductor Optoelectronic Devices for Fibre Optic System Applications - Part 1: Essential Ratings and Characteristics-Edition 1.1; Edition 1:1997 Consolidated with Amendment 1:1998

IEC PAS 62338

Screened balanced cables Coupling attenuation measurement, triaxial method

IEC TR 61807

Magnetic Properties of Magnetically Hard Materials at Elevated Temperatures - Methods of Measurement-First Edition

IEC 60068-3-2

Basic Environmental Testing Procedures Part 3: Background Information Section Two-Combined Temperature/Low Air Pressure Tests-First Edition

IEC 60115-4-101

Fixed Resistors for Use in Electronic Equipment Part 4: Detail Specification: Fixed Power Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 5 % - Assessment Level E-First Edition;

IEC 60115-4-3

Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors, Heat-Sink Types Assessment Level H-First Edition;

IEC 60115-5

Fixed Resistors for Use in Electronic Equipment Part 5: Sectional Specification: Fixed Precision Resistors-Second Edition;

IEC 60115-5-101

Fixed Resistors for Use in Electronic Equipment Part 5: Detail Specification: Fixed Precision Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 0,1% - Assessment Level E-First Edition;

IEC 60115-6-101

Fixed Resistors for use in Electronic Equipment Part 6: Detail Specification: Fixed Film Resistor Networks with Individually Measurable Resistors, all of Equal Value and Equal Dissipation, Class 1 (Dual-in-Line Network)-First Edition; QC 400401XX0001

IEC 60115-6-102

Fixed Resistors for Use in Electronic Equipment Part 6: Detail Specification: Fixed Thick Film Resistor Networks with Individually Measurable Resistors, All of Equal Value and Equal Dissipation, Class 1 (Single-In-Line Network)-First Edition; QC 400401XX0002

IEC 60115-7

Fixed Resistors for Use in Electronic Equipment Part 7: Sectional Specification: Fixed Resistor Networks in Which Not All Resistors Are Individually Measurable-First Edition; QC 400500

IEC 60115-7-1

Fixed Resistors for Use in Electronic Equipment Part 7: Blank Detail Specification: Fixed Resistor Networks in Which Not All Resistors Are Individually Measurable Assessment Level E-First Edition; QC 400501

IEC 60115-8

Fixed Resistors for Use in Electronic Equipment Part 8: Sectional Specification: Fixed Chip Resistors-First Edition; IECQ QC 400600; Amendment 1: 07/2000

IEC 60154-3

Flanges for Waveguides Part 3: Relevant Specifications for Flanges for Flat Rectangular Waveguides-Second Edition

IEC 60169-1-1

Radio-Frequency Connectors Part 1: General Requirements and Measuring Methods Section One - Electrical Tests and Measuring Procedures: Reflection Factor-First Edition

IEC 60169-5

Radio-Frequency Connectors Part 5: R.F. Coaxial Connectors for Cables 96 IEC 50-17 and Larger-First Edition; Corrigendum: 02/1971

IEC 60197

High-Voltage Connecting Wire with Flame Retarding Insulation for Use in Television Receivers-First Edition

IEC 60301

Preferred Diameters of Wire Terminations of Capacitors and Resistors-Edition 2; Amendment 1-1972

IEC 60339-1

General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 1: General Requirements and Measuring Methods-First Edition

IEC 60339-2

General Purpose Rigid Coaxial Transmission Lines and Their Associated Flange Connectors Part 2: Detail Specifications-Second Edition

IEC 60384-16

Fixed capacitors for use in electronic equipment – Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors-Edition 2; Same As IECQ QC 301200

IEC 60384-8

Fixed Capacitors for Use in Electronic Equipment - Part 8: Sectional Specification: Fixed Capacitors of Ceramic Dielectric, Class 1-Edition 3, Same as IECQ QC 300600

IEC 60418-1

Variable Capacitors Part 1: Terms and Methods of Test-First Edition; Amendment 1: 04-1976; Amendment 2: 11-1981

IEC 60457-1

Rigid precision coaxial lines and their associated precision connectors Part 1: General requirements and measuring methods-First Edition

IEC 60708

Low-Frequency Cables with Polyolefin Insulation and Moisture Barrier Polyolefin Sheath Part 1: General Design Details and Requirements-Edition 1

IEC 60875-1

Non-Wavelength-Selective Fibre Optic Branching Devices - Part 1: Generic Specification-Fourth Edition; QC 810000

IEC 60938-2-1

Fixed Inductors for Electromagnetic Interference Suppression - Part 2-1: Blank Detail Specification - Inductors for Which Safety Tests are Required - Assessment Level D-First Edition; IECQ QC 280101

IEC 60938-2-2

Fixed Inductors for Electromagnetic Interference Suppression - Part 2-2: Blank Detail Specification - Inductors for Which Safety Tests are Required (Only)-First Edition; IECQ QC 280102

IEC 60966-2-4

Radio frequency and coaxial cable assemblies Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC 61169-2 connectors-Second Edition

IEC 60966-3

Radio Frequency and Coaxial Cable Assemblies Part 3: Sectional Specification for Semi-Flexible Coaxial Cable Assemblies-Second Edition

IEC 61156-2-2

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 2-2: Horizontal Floor Wiring - Capability Approval - Sectional Specification-First Edition

IEC 61169-1

Radio-Frequency Connectors - Part 1: Generic Specification - General Requirements and Measuring Methods-Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 1996 and 2: 1997; QC 220000

IEC 61196-1-301

Coaxial communication cables Part 1-301: Mechanical test methods Test for ovality-Edition 1

IEC 61196-1-302

Coaxial communication cables Part 1-302: Mechanical test methods Test for eccentricity-Edition 1

IEC 61196-1-308

Coaxial communication cables Part 1-308: Mechanical test methods Test for tensile strength and elongation for copper-clad metals-Edition 1

IEC 61196-1-316

Coaxial communication cables Part 1-316: Mechanical test methods Test of maximum pulling force of cable-Edition 1

IEC 61300-2-48

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurment Procedures - Part 2-48: Tests - Temperature-Humidity Cycling-First Edition

IEC 61300-3-15

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-15: Examinations and measurements – Dome eccentricity of a convex polished ferrule endface-Edition 2

IEC 61580-1

Methods of Measurement for Waveguides - Part 1: Decoupling and Rotation of the Plane of Polarization-Edition 1

IEC 61753-022-2

Fibre optic interconnecting devices and passive components performance standard Part 022-2: Fibre optic connectors terminated on multimode fibre for category C Controlled environment-First Edition

IEC 61753-053-3

Fibre optic interconnecting devices and passive components performance standard Part 053-3: Continuously variable attenuators for category U Uncontrolled environment-First Edition

IEC 61753-091-3

Fibre optic interconnecting devices and passive components performance standard Part 091-3: Single mode fibre optic pigtailed style circulators for category U Uncontrolled environment-First Edition

IEC 61753-2-3

Fibre Optic Interconnecting Devices and Passive Components Performance Standard - Part 2-3: Non-Connectorised Single-Mode 1xN and 2xN Non-Wavelength-Selective Branching Devices for Category U - Uncontrolled Environment-First Edition

IEC 62005-3

Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 3: Relevant Tests for Evaluating Failure Modes and Failure Mechanisms for Passive Components-First Edition

IEC 62077

Fibre Optic Circulators - Generic Specification-First Edition; IECQ QC 920000

IEC 60115-4

Fixed Resistors for Use in Electronic Equipment Part 4: Sectional Specification: Fixed Power Resistors-Second Edition; Amendment 1: 03/1993

IEC 60115-4-1

Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment Level E-First Edition; Amendment 1-03/1993;

IEC 60115-4-2

Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment Level F-First Edition;

IEC 60115-5-1

Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail Specification: Fixed Precision Resistors Assessment Level E-First Edition;

IEC 60115-5-2

Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail Specification: Fixed Precision Resistors Assessment Level F-First Edition;

IEC 60115-6

Fixed Resistors for Use in Electronic Equipment Part 6: Sectional Specification: Fixed Resistor Networks with Individually Measurable Resistors First Edition; (Amendment 1-1987) (IECQ QC 400400)-First Edition; Amendment 1: 02/1987;

IEC 60115-6-2

Fixed Resistors for Use in Electronic Equipment Part 6: Blank Detail Specification - Fixed Resistor Networks with Individually Measurable Resistors, of Either Different Resistance Values or Different Rated Dissipations Assessment Level E-First Edition; QC 400402

IEC 60115-8-1

Fixed Resistors for Use in Electronic Equipment Part 8: Blank Detail Specification: Fixed Chip Resistors. Assessment Level E-First Edition; IECQ QC 400601

IEC 60115-9

Fixed resistors for use in electronic equipment Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors-First Edition

IEC 60115-9-1

Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ-First Edition

IEC 60154-2

Flanges for Waveguides; Part 2: Relevant Specifications for Flanges for Ordinary Rectangular Waveguides-Second Edition; Amendment 1-1997

IEC 60154-6

Flanges for Waveguides Part 6: Relevant Specifications for Flanges for Medium Flat Rectangular Waveguides-First Edition

IEC 60384-3 CORR 1

Fixed capacitors for use in electronic equipment – Part 3: Sectional specification – Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte CORRIGENDUM 1-Edition 3.0

IEC 60457-5

Rigid precision coaxial lines and their associated precision connectors Part 5: 50 Ohms 3.5 mm rigid precision coaxial line with provision for mounting connectors-First Edition

IEC 60874-19-3

Connectors for Optical Fibres and Cables - Part 19-3: Fibre Optic Adaptor (Duplex) Type SC for Multimode Fibre Connectors - Detail Specification-First Edition

IEC 60966-2-3

Radio Frequency and Coaxial Cable Assemblies - Part 2-3: Detail Specification for Flexible Coaxial Cable Assemblies-Second Edition

IEC 60966-2-6

Radio frequency and coaxial cable assemblies Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 3 000 MHz, IEC 61169-24 connectors-Second Edition

IEC 61156-4-1

Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-1: Riser Cables - Blank Detail Specification-Second Edition

IEC 61196-1-200

Coaxial communication cables Part 1-200: Environmental test methods General requirements-Edition 1

IEC 61196-1-206

Coaxial communication cables Part 1-206: Environmental test methods Climatic sequence-Edition 1

IEC 61290-10-1

Optical amplifiers - Test methods - Part 10-1: Multichannel parameters - Pulse method using an optical switch and optical spectrum analyzer-First Edition

IEC 61290-11-2

Optical amplifiers Test methods Part 11-2: Polarization mode dispersion parameter Poincaré sphere analysis method-Edition 1

IEC 61290-6-1

Optical Fibre Amplifiers - Basic Specification - Part 6-1: Test Methods for Pump Leakage Parameters - Optical Demultiplexer-First Edition; It Shall be Read in Conjunction with IEC 61291-1

IEC 61300-2-15

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-15: Tests - Torque strength of coupling mechanism-First Edition

IEC 61300-2-17

Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold-Second Edition

IEC 61300-2-19

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-19: Tests - Damp Heat (Steady State) First Edition-Second Edition

IEC 61300-2-22

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-22: Tests – Change of temperature-Edition 2.0

IEC 61300-2-33

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of closures-Second Edition

IEC 61300-2-34

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contamining fluids-First Edition

IEC 61300-2-38

Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-38: Tests - Sealing for pressurized closures of fibre optic devices-Second Edition

IEC 61300-2-44

Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-44: Tests Flexing of the strain relief of fibre optic devices-First Edition

IEC 61300-2-5

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-5: Tests - Torsion/Twist-Second Edition

IEC 61300-3-10

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-10: Examinations and measurements – Gauge retention force-Edition 2.0

IEC 61300-3-17

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-17: Examinations and Measurements - Endface Angle of Angle-Polished Ferrules-Second Edition

IEC 61300-3-18

Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-18: Examinations and measurements – Keying accuracy of an angled endface connector-Edition 2

IEC 61300-3-39

Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-39: Examinations and Measurements - P C Optical Connector Reference Plug Selection-First Edition

IEC 61753-021-2

Fibre Optic Interconnecting Devices and Passive Component Performance Standard - Part 021-2: Fibre Optic Connectors Terminated on Single-Mode Fibre for Category C - Controlled Environment-First Edition

IEC 62099

Fibre Optic Wavelength Switches - Generic Specification-First Edition; IECQ QC 950000

IEC 62129

Calibration of optical spectrum analyzers-First Edition

IEC 62255-4

Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 4: Aerial drop cables – Sectional specification-Edition 1

IEC PAS 62431

Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency-First Edition

IEC TR 61141

Upper Frequency Limit of R.F. Coaxial Connectors-First Edition

IEC TR 61931

Fibre Optic - Terminology-First Edition

IEC TR 62284

Effective Area Measurements of Single-Mode Optical Fibres - Guidance-First Edition

IEC TR 62331

Pulsed field magnetometry-Edition 1

IEC TS 61873

State of the Art for Symmetrical Pair/Quad Cables with Transmission Characteristics Beyond Category 5-First Edition

IEC 60153-3

Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat Rectangular Waveguides-First Edition

IEC 60153-4

Hollow Metallic Waveguides Part 4: Relevant Specifications for Circular Waveguides-Second Edition

IEC 60153-6

Hollow Metallic Waveguides Part 6: Relevant Specifications for Medium Flat Rectangular Waveguides-First Edition; Amendment 1: 05-1977

IEC 60153-7

Hollow Metallic Waveguides Part 7: Relevant Specifications for Square Waveguides-First Edition

IEC 60154-4

Flanges for Waveguides Part 4: Relevant Specifications for Flanges for Circular Waveguides-First Edition

IEC 60169-17

Radio-Frequency Connectors Part 17: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 6,5 mm (0,256 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type TNC)-First Edition; Amendment 1: 05/1993;

IEC 60169-4

Radio-Frequency Connectors Part 4: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 16 mm (0.63 in) with Screw Lock Characteristic Impedance 50 Ohms (Type 7-16)-Second Edition