|
IEC 60169-9 |
Radio-Frequency Connectors Part 9: RF Coaxial Connectors with Inner Diameter of Outer Conductor 3 mm (0.12 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMC)-First Edition; Amendment 1-1996; (Same As IECQ QC 221400) |
|
IEC 60286-3 |
Packaging of components for automatic handling – Part 3: Packaging of surface mount components on continuous tapes-Edition 4.0 |
|
IEC 60286-4 |
Packaging of Components for Automatic Handling - Part 4: Stick Magazines for Electronic Components Encapsulated in Packages of Form E and G-Second Edition |
|
IEC 60286-5 |
Packaging of components for automatic handling - Part 5: Matrix trays-Second Edition |
|
IEC 60384-4-2 |
Fixed Capacitors for Use in Electronic Equipment Part 4: Blank Detail Specification: Aluminium Electrolytic Capacitors with Solid Electrolyte Assessment Level E-First Edition; Amendment 1: 04-1992; Amendment 2: 06-1996; (Same As IECQ QC 300302) |
|
IEC 60393-1 |
Potentiometers for Use in Electronic Equipment Part 1: Generic Specification-Second Edition; Amendment 1: 02-1992 (Same As IECQ QC 410000) |
|
IEC 60418-3 |
Variable Capacitors Part 3: Type Specification for Variable Trimmer Capacitors Type B Blank Detail Specification-First Edition |
|
IEC 60457-2 |
Rigid precision coaxial lines and their associated precision connectors Part 2: 50 Ohm 7 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector-First Edition |
|
IEC 60457-3 |
Rigid precision coaxial lines and their associated precision connectors Part 3: 14 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector - Characteristic impedances 50 Ohms and 75 Ohms-Second Edition |
|
IEC 60717 |
Method for the Determination of the Space Required by Capacitors and Resistors with Unidirectional Terminations-Edition 1 |
|
IEC 60966-2-1 |
Radio frequency and coaxial cable assemblies Part 2-1: Sectional specification for flexible coaxial cable assemblies-Second Edition |
|
IEC 60966-3-1 |
Radio Frequency and Coaxial Cable Assemblies Part 3-1: Blank Detail Specification for Semi-Flexible Coaxial Cable Assemblies-Second Edition |
|
IEC 60966-4 |
Radio frequency and coaxial cable assemblies Part 4: Sectional specification for semi-rigid coaxial cable assemblies-Second Edition |
|
IEC 61156-3-1 |
Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 3-1: Work Area Wiring - Blank Detail Specification-Second Edition |
|
IEC 61156-4-2 |
Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 4-2: Riser Cables - Capability Approval - Sectional Specification-First Edition |
|
IEC 61156-5-1 |
Multicore and symmetrical pair/quad cables for digital communications – Part 5-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Horizontal floor wiring – Blank detail specification-Edition 2.0 |
|
IEC 61156-7 |
Multicore and symmetrical pair/quad cables for digital communications Part 7: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Sectional specification for digital and analog communication cables-First Edition |
|
IEC 61169-1-1 |
Radio-Frequency Connectors Part 1-1: Single, Multi-Series, Dual-Language Blank Detail Specification-Edition 1; Same As IECQ QC 220001 |
|
IEC 61280-2-10 |
Fibre optic communication subsystem test procedures Part 2-10: Digital systems Time-resolved chirp and alpha-factor measurement of laser transmitters-First Edition |
|
IEC 61281-1 |
Fibre Optic Communication Subsystems - Part 1: Generic Specification-First Edition |
|
IEC 61290-10-3 |
Optical amplifiers Test methods Part 10-3: Multichannel parameters Probe methods-First Edition |
|
IEC 61300-2-23 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices-First Edition |
|
IEC 61300-2-24 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-24: Tests - Screen Testing of Ceramic Alignment Split Sleeve by Stress Application-First Edition |
|
IEC 61300-3-19 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-19: Examinations and Measurements - Polarization Dependence of Return Loss of a Single-Mode Fibre Optic Component-First Edition |
|
IEC 61300-3-28 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-28: Examinations and Measurements - Transient Loss-First Edition |
|
IEC 61300-3-30 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-30: Examinations and Measurements - Polish Angle and Fibre Position on Single Ferrule Multifibre Connectors-First Edition |
|
IEC 61300-3-34 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-34: Examinations and Measurements - Attenuation of Random Mated Connectors-Second Edition |
|
IEC 61754-4-1 |
Fibre Optic Connector Interfaces - Part 4-1: Type SC Connector Family - Simplified Receptacle SC-PC Connector Interfaces-First Edition |
|
IEC 62005-4 |
Reliability of Fibre Optic Interconnecting Devices and Passive Optical Components - Part 4: Product Screening-First Edition |
|
IEC 62255-3 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 3: Filled cables – Sectional specification-Edition 1 |
|
IEC 62255-3-1 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) Outside plant cables Part 3-1: Filled cables Blank detail specification-First Edition |
|
IEC TR 62221 |
Optical Fibres - Measurement Methods - Microbending Sensitivity-First Edition |
|
IEC TR 62324 |
Single-Mode Optical Fibres - Raman Gain Efficency Measurement using Continuous Wave Method - Guidance-Second Edition |
|
IEC 60154-1 |
Flanges for Waveguides Part 1: General Requirements-Second Edition; Amendment 1: 05-1993 |
|
IEC 60169-15 |
Radio-Frequency Connectors Part 15: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 4.13 mm (0.163 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type SMA)-First Edition; Amendment 1: 02-1996; IECQ 221100 |
|
IEC 60286-6 |
Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components-Second Edition |
|
IEC 60384-11 |
Fixed Capacitors for Use in Electronic Equipment Part 11: Sectional Specification: Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil D.C. Capacitors-Second Edition; |
|
IEC 60384-18 |
Fixed capacitors for use in electronic equipment – Part 18: Sectional specification – Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte-Edition 2.0 |
|
IEC 60384-2-1 |
Fixed capacitors for use in electronic equipment – Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors – Assessment levels E and EZ-Edition 2; Same As IECQ QC 300401 |
|
IEC 60384-3-1 |
Fixed capacitors for use in electronic equipment – Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte – Assessment level EZ-Edition 2; |
|
IEC 60384-3-101 |
Fixed Capacitors for Use in Electronic Equipment Part 3-101: Detail Specification: Fixed Tantalum Chip Capacitors for Surface Mounting with Solid Electrolyte and Porous Anode, Style L, Assessment Level E-First Edition; |
|
IEC 60384-6 |
Fixed Capacitors for Use in Electronic Equipment Part 6: Sectional Specification: Fixed Metallized Polycarbonate Film Dielectric D.C. Capacitors-Edition 3; |
|
IEC 60384-9 |
Fixed capacitors for use in electronic equipment – Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2-Edition 3; Same As IECQ QC 300700 |
|
IEC 60418-2 |
Variable Capacitors Part 2: Type Specification for Variable Tuning Capacitors Type A-First Edition; Amendment 1: 11-1981 |
|
IEC 60418-4 |
Variable Capacitors Part 4: Type Specification for Variable Pre-Set Capacitors Type C Blank Detail Specification-First Edition |
|
IEC 60457-4 |
Rigid precision coaxial lines and their associated precision connectors Part 4: 21 mm rigid precision coaxial line and associated hermaphroditic precision coaxial connector Characteristic impedance 50 Ohms (Type 9/21) - Characteristic impedance 75 Ohms (Type 6/21)-Second Edition |
|
IEC 60915 CORR 1 |
Fixed capacitors for use in electronic equipment – Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components-Edition 2.0 |
|
IEC 60918 |
PVC Insulated Ribbon Cable with a Pitch of 1,27 mm Suitable for Insulation Displacement Termination-First Edition; Amendment 1: 06-1992 |
|
IEC 60966-2-2 |
Radio frequency and coaxial cable assemblies Part 2-2: Blank detail specification for flexible coaxial cable assemblies-Second Edition |
|
IEC 60966-2-5 |
Radio frequency and coaxial cable assemblies Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 to 1 000 MHz, IEC 61169-2 connectors-Second Edition |
|
IEC 61156-5-2 |
Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 5-2: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Horizontal Floor Wiring - Capability Approval - Section Specification-First Edition |
|
IEC 61156-6 |
Multicore and symmetrical pair/quad cables for digital communications – Part 6: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Work area wiring – Sectional specification-Edition 2.0 |
|
IEC 61156-6-1 |
Multicore and symmetrical pair/quad cables for digital communications – Part 6-1: Symmetrical pair/quad cables with transmission characteristics up to 1 000 MHz – Work area wiring – Blank detail specification-Edition 2.0 |
|
IEC 61156-6-2 |
Multicore and Symmetrical Pair/Quad Cables for Digital Communications - Part 6-2: Symmetrical Pair/Quad Cables with Transmission Characteristics up to 600 MHz - Work Area Wiring - Capability Approval - Sectional Specification-First Edition |
|
IEC 61156-7-1 |
Multicore and symmetrical pair/quad cables for digital communications Part 7-1: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Blank detail specification for digital and analog communication cables-First Edition |
|
IEC 61156-7-2 |
Multicore and symmetrical pair/quad cables for digital communications Part 7-2: Symmetrical pair cables with transmission characteristics up to 1 200 MHz Quality assessment procedure Sectional specification for digital and analog communication cables-First Edition |
|
IEC 61291-1 |
Optical amplifiers – Part 1: Generic specification-Second Edition |
|
IEC 61300-2-25 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-25: Tests - Sealing endurance for closures-First Edition |
|
IEC 61300-2-28 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Industrial atmosphere (sulphur dioxide)-First Edition |
|
IEC 61300-3-2 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-2: Examinations and Measurements - Polarization Dependence of Attenuation in a Single-Mode Fibre Optic Device-Second Edition |
|
IEC 61300-3-22 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-22: Examinations and Measurements - Ferrule Compression Force-First Edition |
|
IEC 61300-3-40 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-40: Examinations and Measurements - Extinction Ratio of a Polarization Maintaining (pm) Fibre Pigtailed Connector-First Edition |
|
IEC 61300-3-5 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-5: Examinations and Measurements - Wavelength Dependence of Attenuation-First Edition |
|
IEC 61300-3-7 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-7: Examinations and Measurements - Wavelength Dependence of Attenuation and Return Loss-First Edition |
|
IEC 61314-1 |
Fibre Optic Fan-Outs - Part 1: Generic Specification-Second Edition; Same as IECQ QC 880000 |
|
IEC 61314-1-1 |
Fibre optic fan-outs – Part 1-1: Blank detail specification-Edition 2.0 |
|
IEC 61754-13 |
Fibre Optic Connector Interfaces - Part 13: Type FC-PC Connector-Edition 2.0 |
|
IEC 61754-15 |
Fibre Optic Connector Interfaces - Part 15: Type LSH Connector Family-First Edition |
|
IEC 61977 |
Fibre Optic Filters - Generic Specification-First Edition |
|
IEC 61978-1 |
Fibre Optic Passive Dispersion Compensators - Part 1: Generic Specification-IECQ QC 940000; First Edition |
|
IEC 62005-1 |
Reliability of Fibre Optic Interconnecting Devices and Passive Components - Part 1: Introductory Guide and Definitions-First Edition |
|
IEC 62005-7 |
Reliability of fibre optic interconnecting devices and passive optical components Part 7: Life stress modeling-First Edition |
|
IEC 62255-2-1 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 2-1: Unfilled cables – Blank detail specification-Edition 1 |
|
IEC 62255-5 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 5: Filled drop cables – Sectional specification-Edition 1 |
|
IEC 62255-5-1 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 5-1: Filled drop cables – Blank detail specification-Edition 1 |
|
IEC TR 60440 |
Method of Measurement of Non-Linearity in Resistors-Edition 1.0; Includes Corrigendum: 09/1974 |
|
IEC TR 62048 |
Optical Fibres - Reliability - Power Law Theory-First Edition |
|
IEC TR 62316 |
Guidance for the interpretation of OTDR backscattering traces-Edition 2.0 |
|
IEC TS 62033 |
Attenuation Uniformity in Optical Fibres-First Edition |
|
IEC 60154-7 |
Flanges for Waveguides Part 7: Relevant Specifications for Flanges for Square Waveguides-First Edition |
|
IEC 60169-12 |
Radio-Frequency Connectors Part 12: R.F. Coaxial Connectors with Screw Coupling, Unmatched (Type UHF)-First Edition |
|
IEC 60169-26 |
Radio-Frequency Connectors - Part 26: R.F. Coaxial Connectors with Screw Coupling - Characteristic Impedance 50 Ohms - Frequency Range 0 to 18 GHz (Type TNC 18 GHz)-First Edition |
|
IEC 60169-6 |
Radio-Frequency Connectors Part 6: R.F. Coaxial Connectors for Cables 96 IEC 75-17 and Larger-First Edition |
|
IEC 60169-7 |
Radio-Frequency Connectors Part 7: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9,5 mm (0.374 in) with Bayonet Lock - Characteristic Impedance 50 Ohms (Type C)-First Edition; Amendment 1: 08/1993 |
|
IEC 60190 |
Non-Wirewound Potentiometers Type 2-First Edition |
|
IEC 60261 |
Sealing Test for Pressurized Waveguide Tubing and Assemblies-Second Edition |
|
IEC 60286-1 |
Packaging of Components for Automatic Handling - Part 1: Tape Packaging of Components with Axial Leads on Continuous Tapes-Second Edition |
|
IEC 60374 |
Guide for choosing modular dimensions for waveguide components-Edition 1.0 |
|
IEC 60384-12 |
Fixed Capacitors for Use in Electronic Equipment Part 12: Sectional Specification: Fixed Polycarbonate Film Dielectric Metal Foil D.C. Capacitors-Second Edition; |
|
IEC 60384-12-1 |
Fixed Capacitors for Use in Electronic Equipment Part 12: Blank Detail Specification: Fixed Polycarbonate Film Dielectric Metal Foil D.C. Capacitors Assessment Level E-First Edition; |
|
IEC 60384-15-1 |
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Foil Electrode Assessment Level E-First Edition; (Same As IECQ QC 300203) |
|
IEC 60384-15-2 |
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with Non-Solid Electrolyte and Porous Anode Assessment Level E-First Edition; |
|
IEC 60384-16-1 |
Fixed capacitors for use in electronic equipment – Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors – Assessment levels E and EZ-Edition 2; Same As IECQ QC 301201 |
|
IEC 60384-17-1 |
Fixed capacitors for use in electronic equipment – Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors – Assessment levels E and EZ-Edition 2; Same As IECQ QC 301301 |
|
IEC 60384-18-1 |
Fixed capacitors for use in electronic equipment – Part 18-1: Blank detail specification – Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte – Assessment level EZ-Edition 2.0 |
|
IEC 60384-21 CORR 1 |
Fixed capacitors for use in electronic equipment – Part 21: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 CORRIGENDUM 1-First Edition |
|
IEC 60384-22 CORR 1 |
Fixed capacitors for use in electronic equipment – Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 CORRIGENDUM 1-First Edition |
|
IEC 60384-9-1 |
Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 – Assessment level EZ-Edition 2; Same as IECQ QC 300701 |
|
IEC 60393-2 |
Potentiometers for Use in Electronic Equipment Part 2: Sectional Specification Lead-Screw Actuated and Rotary Preset Potentiometers-Second Edition; (Same As IECQ QC 410100) |
|
IEC 60393-2-1 |
Potentiometers for Use in Electronic Equipment Part 2: Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers Assessment Level E-First Edition; (Same As IECQ QC 410101) |
|
IEC 60393-2-2 |
Potentiometers for Use in Electronic Equipment Part 2: Blank Detail Specification: Lead-Screw Actuated and Rotary Preset Potentiometers Assessment Level F-First Edition; (Same As IECQ QC 410102) |
|
IEC 60393-3-1 |
Potentiometers for Use in Electronic Equipment Part 3: Blank Detail Specification: Rotary Precision Potentiometers Assessment Level E-First Edition; (Same As IECQ QC 410402) |
|
IEC 60393-4 |
Potentiometers for Use in Electronic Equipment Part 4: Sectional Specification: Single-Turn Rotary Power Potentiometers-Second Edition; (Same As IECQ QC 410200) |
|
IEC 60393-4-1 |
Potentiometers for Use in Electronic Equipment Part 4: Blank Detail Specification: Single-Turn Rotary Power Potentiometers Assessment Level E-First Edition; (Same As IECQ QC 410203) |
|
IEC 60393-4-2 |
Potentiometers for Use in Electronic Equipment Part 4: Blank Detail Specification: Single-Turn Rotary Power Potentiometers Assessment Level F-First Edition; (Same As IECQ QC 410204) |
|
IEC 60393-5 |
Potentiometers for Use in Electronic Equipment Part 5: Sectional Specification: Single-Turn Rotary Low-Power Wirewound and Non-Wirewound Potentiometers-Second Edition; (Same As IECQ QC 410300) |
|
IEC 60393-5-2 |
Potentiometers for Use in Electronic Equipment Part 5: Blank Detail Specification: Single-Turn Rotary Low-Power Potentiometers Assessment Level F-First Edition; |
|
IEC 60966-3-2 |
Radio frequency and coaxial cable assemblies Part 3-2: Detail specification for semi-flexible coaxial cable assemblies for GSM use (0,8 GHz 1 GHz)-Second Edition |
|
IEC 60979 |
Wires for Wire Wrapping Applications-First Edition |
|
IEC 61045-1 |
Fixed film resistor networks for use in electronic equipment - Part 1: Generic specification-First Edition; |
|
IEC 61169-32 |
Radio-Frequency Connectors - Part 32: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,85 mm (0,072 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,85)-First Edition |
|
IEC 61169-33 |
Radio-Frequency Connectors Part 33: Sectional Specification for Series BMA R.F. Connectors-Edition 1; Same as IECQ QC 222800 |
|
IEC 61274-1-1 |
Adaptors for fibre optic connectors – Part 1-1: Blank detail specification-Second Edition; |
|
IEC 61291-2 |
Optical amplifiers – Part 2: Digital applications – Performance specification template-Edition 2.0 |
|
IEC 61291-5-2 |
Optical Amplifiers - Part 5-2: Qualification Specifications - Reliability Qualification for Optical Fibre Amplifiers-First Edition |
|
IEC 61300-2-27 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow-First Edition |
|
IEC 61300-2-29 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-29: Tests - Low air pressure-First Edition |
|
IEC 61300-2-30 |
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-30: Tests - Solar radiation-First Edition |
|
IEC 61300-2-40 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-40: Tests - Screen Testing of Attenuation of Single-Mode Tuned Angled Optical Connectors-First Edition |
|
IEC 61300-2-43 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Mesurement Procedures - Part 2-43: Tests - Screen Testing of Return Loss of Single Mode PC Optical Fibre Connectors-First Edition |
|
IEC 61300-2-45 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Mesurement Procedures - Part 2-45: Tests - Durability Test by Water Immersion-First Edition |
|
IEC 61300-2-47 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-47: Tests – Thermal shocks-Second Edition |
|
IEC 61300-3-16 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-16: Examinations and measurements Endface radius of spherically polished ferrules-Second Edition |
|
IEC 61300-3-24 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-24: Examinations and measurements – Keying accuracy of optical connectors for polarization maintaining fibre-Edition 2 |
|
IEC 61580-2 |
Methods of Measurement for Waveguides - Part 2: Level of Intermodulation Products-Edition 1 |
|
IEC 61580-3 |
Methods of Measurement for Waveguides - Part 3: Variation of Group Delay-First Edition |
|
IEC 61580-7 |
Methods of Measurement for Waveguides - Part 7: Graphical Method for the Determination of Waveguide Performance-Edition 1 |
|
IEC 61580-8 |
Methods of Measurement for Waveguides - Part 8: Waveguide Power Holding Capability-Edition 1 |
|
IEC 61580-9 |
Methods of Measurement for Waveguides - Part 9: Reflection Coefficient at Rectangular Waveguide Interfaces-Edition 1 |
|
IEC 61744 |
Calibration of Fibre Optic Chromatic Dispersion Test Sets-Edition 2 |
|
IEC 61754-10 |
Fibre Optic Connector Interfaces - Part 10: Type Mini-MPO Connector Family-Second Edition |
|
IEC 61754-12 |
Fibre Optic Connector Interfaces - Part 12: Type FS Connector Family-First Edition |
|
IEC 61754-16 |
Fibre Optic Connector Interfaces - Part 16: Type PN Connector Family-First Edition |
|
IEC 61754-18 |
Fibre Optic Connector Interfaces - Part 18: Type MT-RJ Connector Family-First Edition |
|
IEC 61754-19 |
Fibre Optic Connector Interfaces - Part 19: Type SG Connector Family-First Edition |
|
IEC 61754-21 |
Fibre optic connector interfaces Part 21: Type SMI connector family for plastic optical fibre-Edition 1 |
|
IEC 61754-22 |
Fibre optic connector interfaces Part 22: Type F-SMA connector family-Edition 1 |
|
IEC 61754-3 |
Fibre Optic Connector Interfaces - Part 3: Type LSA Connector Family-First Edition |
|
IEC 61754-6-1 |
Fibre optic connector interfaces Part 6-1: Type MU connector family Simplified receptacle MU-PC connector interfaces-First Edition |
|
IEC 61754-8 |
Fibre Optic Connector Interfaces - Part 8: CF08 Connector Family-First Edition |
|
IEC 61754-9 |
Fibre Optic Connector Interfaces - Part 9: Type DS Connector Family-First Edition |
|
IEC 61755-1 |
Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance-Edition 1 |
|
IEC TR 62152 |
Background of terms and definitions of cascaded two-ports-First Edition |
|
IEC TR 62349 |
Guidance for polarization crosstalk measurement of optical fibre-Edition 1 |
|
IEC 60169-11 |
Radio-Frequency Connectors Part 11: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 9.5 mm (0.374 in) with Screw Coupling-Characteristic Impedance 50 Ohms (Type 4.1/9.5)-First Edition |
|
IEC 60169-13 |
Radio Frequency Connectors Part 13: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 5.6 mm (0.22 in) - Characteristic Impedance 75 Ohms (Type 1.6/5.6) - Characteristic Impedance 50 Ohms (Type 1.8/5.6) with Similar Mating Dimensions-First Edition; Amendment 1-1996; IECQ 222400 |
|
IEC 60169-19 |
Radio-Frequency Connectors Part 19: R.F. Coaxial Connectors with Inner Diameter of Outer Conductor 2,08 mm (0,082 in) with Snap Coupling - Characteristics Impedance 50 Ohms (Type SSMB)-First Edition; Corrigendum: 07/1995 |
|
IEC 60286-2 |
Packaging of components for automatic handling Part 2: Tape packaging of components with unidirectional leads on continuous tapes-Edition 2.1; Edition 2:1997 Consolidated With Amendment 1:2002 |
|
IEC 60294 |
Measurement of the Dimensions of a Cylindrical Component Having Two Axial Terminations-Edition 1 |
|
IEC 60384-11-1 |
Fixed Capacitors for Use in Electronic Equipment Part 11: Blank Detail Specification: Fixed Polyethylene-Terephthalate Film Dielectric Metal Foil D.C. Capacitors Assessment Level E-First Edition; |
|
IEC 60384-13 |
Fixed Capacitors for Use in Electronic Equipment Part 13: Sectional Specification: Fixed Polypropylene Film Dielectric Metal Foil D.C. Capacitors-Third Edition ; |
|
IEC 60384-13-1 |
Fixed capacitors for use in electronic equipment – Part 13-1: Blank detail specification – Fixed polypropylene film dielectric metal foil d.c. capacitors – Assessment level E-Second Edition; |
|
IEC 60384-15 |
Fixed Capacitors for Use in Electronic Equipment Part 15: Sectional Specification: Fixed Tantalum Capacitors with Non-Solid or Solid Electrolyte-Amendment 1: 02/1987; Amendment 2: 04/1992; |
|
IEC 60384-15-3 |
Fixed Capacitors for Use in Electronic Equipment Part 15: Blank Detail Specification: Fixed Tantalum Capacitors with Solid and Porous Anode Assessment Level E-First Edition; Amendment 1: 04-1992; (Same AS IECQ QC 300201) |
|
IEC 60384-18-2 |
Fixed Capacitors for Use in Electronic Equipment Part 18: Blank Detail Specification: Fixed Aluminium Electrolytic Chip Capacitors with Non-Solid Electrolyte Assessment Level E-Second Edition |
|
IEC 60384-6-1 |
Fixed Capacitors for Use in Electronic Equipment Part 6: Blank Detail Specification: Fixed Metallized Polycarbonate Film Dielectric D.C. Capacitors Assessment Level E-Edition 2; |
|
IEC 60393-2-101 |
Potentiometers for Use in Electronic Equipment - Part 2: Detail Specification: Lead-Screw Actuated Preset Potentiometers - Stability Class 5% - Assessment Level E-First Edition; (Same As IECQ QC 410101XX0001) |
|
IEC 60393-3 |
Potentiometers for Use in Electronic Equipment Part 3: Sectional Specification: Rotary Precision Potentiometers-Second Edition; (Same As IECQ QC 410400) |
|
IEC 60393-5-1 |
Potentiometers for Use in Electronic Equipment Part 5: Blank Detail Specification: Single-Turn Rotary Low-Power Potentiometers Assessment Level E-First Edition; (Same As IECQ QC 410301) |
|
IEC 60393-6 |
Potentiometers for use in electronic equipment Part 6: Sectional specification: Surface mount preset potentiometers-First Edition |
|
IEC 60393-6-1 |
Potentiometers for use in electronic equipment Part 6-1: Blank detail specification: Surface mount preset potentiometers Assessment level E-First Edition |
|
IEC 60966-4-1 |
Radio frequency and coaxial cable assemblies Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies-Second Edition |
|
IEC 61045-2 |
Fixed film resistor networks for use in electronic equipment - Part 2: Sectional specification for film resistor networks of assessed quality on the basis of the capability approval procedure-First Edition; |
|
IEC 61045-2-1 |
Fixed film resistor networks for use in electronic equipment - Part 2: Blank detail specification for film resistor networks of assessed quality on the basis of the capability approval procedure. Assessment level E-First Edition; |
|
IEC 61169-2 |
Radio-frequency connectors – Part 2: Sectional specification – Radio frequency coaxial connectors of type 9,52-Edition 2 |
|
IEC 61169-24 |
Radio-frequency connectors Part 24: Sectional Specification Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (type F)-First Edition |
|
IEC 61169-29 |
Radio-frequency connectors Part 29: Sectional specification Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications) Characteristic impedance 50 OHM (type 1,0/2,3) 50 OHM and 75 OHM applications-Edition 1 |
|
IEC 61169-31 |
Radio-Frequency Connectors - Part 31: RF Coaxial Connectors with Inner Diameter of Outer Conductor 1,0 mm (0,039 in) with Screw Coupling - Characteristic Impedance 50 Ohms (Type 1,0)-First Edition; IECQ QC 223100 |
|
IEC 61169-36 |
Radio-Frequency Connectors Part 36: Microminiature R.R. Coaxial Connectors with Snap-On Coupling - Characteristic Impedance 50 (Type MCX)-Edition 1; Same aS IECQ QC 223600 |
|
IEC 61274-1 |
Adaptors for fibre optic connectors – Part 1: Generic specification-Edition 2.0 |
|
IEC 61291-4 |
Optical amplifiers Part 4: Multichannel applications Performance specification template-First Edition |
|
IEC 61300-2-26 |
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-26: Tests – Salt mist-Edition 2.0 |
|
IEC 61300-2-41 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-41: Tests - Screen Testing of Attenuation of Single-Mode Tuned Non-Angled Optical Fibre Connectors-First Edition |
|
IEC 61300-2-42 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 2-42: Tests - Static Side Load for Connectors-Second Edition |
|
IEC 61300-3-23 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-23: Examination and Measurements - Fibre Position Relative to Ferrule Endface-First Edition |
|
IEC 61300-3-25 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-25: Examinations and Measurements - Concentricity of the Ferrules and Ferrules with Fibre Installed-First Edition |
|
IEC 61300-3-26 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-26: Examination and Measurements - Measurement of the Angular Misalignment between Fibre and Ferrules Axes-Second Edition |
|
IEC 61300-3-27 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-27: Examinations and Measurements - Measurement Method for the Hole Location of a Multiway Connector Plug-First Edition |
|
IEC 61300-3-33 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-33: Examinations and Measurements - Ferrule Withdrawal Force-First Edition |
|
IEC 61300-3-36 |
Fibre Optic Interconnecting Devices and Passive Components - Basic Test and Measurement Procedures - Part 3-36: Examinations and Measurements - Measurement Methods for the Inside and Outside Diameters of Fibre Optic Connector Ferrules-First Edition |
|
IEC 61300-3-37 |
Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 3-37: Examinations and measurements Endface angle of angle-polished optical fibres-First Edition |
|
IEC 61580 |
Measurement of Return Loss on Waveguide and Waveguide Assemblies-Edition 1; Corrigendum 1: 7/2006 |
|
IEC 61580-4 |
Methods of measurement for waveguides – Part 4: Attenuation of waveguide and waveguide assemblies-Edition 1; Corrigendum 1: 7/2006 |
|
IEC 61745 |
End-Face Image Analysis Procedure for the Calibration of Optical Fibre Geometry Test Sets-First Edition |
|
IEC 61754-23 |
Fibre optic connector interfaces Part 23: Type LX.5 connector family-First Edition |
|
IEC 61757-1 |
Fibre Optic Sensors - Part 1: Generic Specification-First Edition; QC 890000 |
|
IEC 62255-4-1 |
Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) – Outside plant cables – Part 4-1: Aerial drop cables – Blank detail specification-Edition 1 |
|
IEC TR 62000 |
Single-mode fibre compatibility guidelines-First Edition |