|
IEC 60605-6 |
Equipment reliability testing - Part 6: Tests for the validity and estimation of the constant failure rate and constant failure intensity-Third Edition |
|
IEC 60721-2-7 |
Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Fauna and Flora-First Edition |
|
IEC 61003-1 |
Industrial-process control systems Instruments with analogue inputs and two- or multi-state outputs Part 1: Methods of evaluating performance-Second Edition |
|
IEC 61014 |
Programmes for Reliability Growth-Second Edition |
|
IEC 61069-1 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 1: General Considerations and Methodology-Edition 1 |
|
IEC 61310-3 |
Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators-Edition 2.0 |
|
IEC 61514 |
Industrial-Process Control Systems - Methods of Evaluating the Performance of Valve Positioners with Pneumatic Outputs-First Edition |
|
IEC 61991 |
Railways Applications - Rolling Stock - Protective Provisions Against Electrical Hazards-First Edition |
|
IEC 61992-1 |
Railway Applications - Fixed Installations - DC Switchgear - Part 1: General-Edition 2.0 |
|
IEC 61992-3 |
Railway applications - Fixed installations - DC switchgear - Part 3: Indoor d.c. disconnectors, switch-disconnectors and earthing switches-Edition 2.0 |
|
IEC 62236-2 |
Railway applications Electromagnetic compatibility Part 2: Emission of the whole railway system to the outside world-First Edition |
|
IEC PAS 62405 |
Real-time Ethernet Vnet/IP TM specification-Edition 1 |
|
IEC PAS 62409 |
Real-time Ethernet for Plant Automation (EPA)-Edition 1 |
|
IEC TR 62140-2 |
Fossil-fired steam power stations Part 2: Drum-level control-First Edition |
|
IEC 60068-2-48 |
Basic Environmental Testing Procedures Part 2: Tests Guidance on the Application of the Tests of IEC Publication 68 to Simulate the Effects of Storage-First Edition |
|
IEC 60068-3-4 |
Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests-First Edition; Replaces and Cancels IEC 60068-2-28: 1990 |
|
IEC 60077-4 |
Railway applications Electric equipment for rolling stock Part 4: Electrotechnical components Rules for AC circuit-breakers |
|
IEC 60317-19 |
Specifications for Particular Types of Winding Wires - Part 19: Solderable Polyurethane Enamelled Round Copper Wire Overcoated with Polyamide, Class 130-Edition 2.2; Edition 2: 1990 Consolidated with Amedments 1: 1997 and 2: 1999 |
|
IEC 60605-3-4 |
Equipment Reliability Testing Part 3: Preferred Test Conditions Section 4: Test Cycle 4: Equipment for Portable and Non-Stationary Use - Low Degree of Stimulation-First Edition |
|
IEC 61298-1 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 1: General considerations-First Edition |
|
IEC 61298-4 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Evaluation report content-First Edition |
|
IEC 61851-1 |
Electric vehicle conductive charging system - Part 1: General requirements-First Edition |
|
IEC 61992-2 |
Railway Applications - Fixed Installations - DC Switchgear - Part 2: DC circuit-breakers-Edition 2.0 |
|
IEC 62278 |
Railway Applications Specification and Demonstration of Reliability, Availability, Maintainability and Safety (RAMS)-First Edition |
|
IEC TR 60638 |
Criteria for Assessing and Coding of the Commutation of Rotating Electrical Machines for Traction-Edition 1 |
|
IEC TR 60784 |
Instrumentation for Electric Road Vehicles-Edition 1 |
|
IEC TS 61287-2 |
Power Converters Installed on Board Railway Rolling Stock Part 2: Additional Technical Information-First Edition |
|
IEC TS 62098 |
Evaluation Methods for Microprocessor-Based Instruments-First Edition |
|
IEC 60068-2-40 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests-First Edition; Amendment 1: 07-1983 |
|
IEC 60068-2-46 |
Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kd: Hydrogen Sulphide Test for Contacts and Connections-First Edition |
|
IEC 60077-2 |
Railway Applications - Electric Equipment for Rolling Stock - Part 2: Electrotechnical Components - General Rules-First Edition |
|
IEC 60077-3 |
Railway Applications - Electric Equipment for Rolling Stock - Part 3: Electrotechnical Components - Rules for d.c. Circuit-Breakers-First Edition |
|
IEC 60721-3-9 |
Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 9: Microclimates Inside Products-First Edition; Amendment 1: 12/1994; Corrigendum 1: 1/1995 |
|
IEC 61298-2 |
Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions-First Edition |
|
IEC 61512-2 |
Batch Control - Part 2: Data Structures and Guidelines for Languages-Edition 1 |
|
IEC 61514-2 |
Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs-First Edition |
|
IEC 61851-22 |
Electric Vehicle Conductive Charging System - Part 22: AC Electric Vehicle Charging Station-First Edition; Replaces IEC 60718 |
|
IEC 62128-2 |
Railway applications Fixed installations Part 2: Protective provisions against the effects of stray currents caused by d.c. traction systems-First Edition |
|
IEC 62280-2 |
Railway applications Communication, signalling and processing systems Part 2: Safety-related communication in open transmission systems-First Edition |
|
IEC 9506-5 |
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers-First Edition |
|
IEC TR 60877 |
Procedures for ensuring the cleanliness of industrial-process measurement and control equipment in oxygen service-Second Edition |
|
IEC TR 62010 |
Analyser systems - Guidance for maintenance management-Edition 1 |
|
IEC TR 62140-1 |
Fossil-fired steam power stations Part 1: Limiting controls-First Edition |
|
IEC 60068-2-69 |
Environmental testing - Part 2-69: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method-Edition 2.0 |
|
IEC 60560 |
Definitions and Terminology of Brush-Holders for Electrical Machines-Edition 1 |
|
IEC 60605-3-5 |
Equipment Reliability Testing - Part 3: Preferred Test Conditions - Section 5: Test Cycle 5: Ground Mobile Equipment - Low Degree of Simulation-First Edition; Corrigendum 1: 03/1996 |
|
IEC 60631 |
Characteristics and Tests of Electrodynamic and Electromagnetic Braking Systems-Edition 1 |
|
IEC 61070 |
Compliance Test Procedures for Steady-State Availability-First Edition |
|
IEC 61207-2 |
Expression of Performance of Gas Analyzers - Part 2: Oxygen in Gas (Utilizing High-Temperature Electrochemical Sensors)-First Edition; Corrigendum 05/1994 |
|
IEC 61207-6 |
Expression of Performance of Gas Analyzers - Part 6: Photometric Analyzers-First Edition; CENELEC EN 61207-6: 1994 |
|
IEC 61310-2 |
Safety of machinery - Indication, marking and actuation - Part 2: Requirements for marking-Edition 2 |
|
IEC 61851-21 |
Electric Vehicle Conductive Charging System - Part 21: Electric Vehicle Requirements for Conductive Connection to an A.C./D.C. Supply-First Edition; Replaces IEC 60718 |
|
IEC 62236-3-1 |
Railway applications Electromagnetic compatibility Part 3-1: Rolling stock Train and complete vehicle-First Edition |
|
IEC 62236-3-2 |
Railway applications Electromagnetic compatibility Part 3-2: Rolling stock Apparatus |
|
IEC 62279 |
Railway Applications Communications, Signalling and Processing Systems Software for Railway Control and Protection Systems-First Edition |
|
IEC 62280-1 |
Railway applications Communication, signalling and processing systems Part 1: Safety-related communication in closed transmission systems-First Edition |
|
ISO 9506-5 |
Industrial automation systems - Manufacturing message specification - Part 5: Companion Standard for Programmable Controllers-First Edition |
|
IEC PAS 62407 |
Real-time Ethernet control automation technology (EtherCATTM)-Edition 1 |
|
IEC PAS 62408 |
Real-time Ethernet Powerlink (EPL)-Edition 1 |
|
IEC TR 61832 |
Analyser Systems - Guide to Technical Enquiry and Bid Evaluation-First Edition |
|
IEC TR 62140-3 |
Fossil-fired steam power stations Part 3: Steam-temperature control-First Edition |
|
ISO 21000-5 AMD 1 |
Information technology Multimedia framework (MPEG-21) - Part 5: Rights Expression Language AMENDMENT 1: MAM (Mobile And optical Media) profile-First Edition |
|
IEC 60136 |
Dimensions of Brushes and Brush-Holders for Electrical Machinery-Edition 2; Amendment 1: 04/1995; Replaces IEC 60467: 1974; IEC 136-1:1962; IEC 136-1A:1972; IEC 136-2:1967; IEC 136-2A:1972; IEC 136-2B:1973; IEC 136-3:1972 |
|
IEC 60264-1 |
Packaging of winding wires. Part 1: Containers for round winding wires-First Edition |
|
IEC 60276 |
Definitions and Nomenclature for Carbon Brushes, Brush-Holders, Commutators and Slip-Rings-Edition 1; Amendment 1-1987 |
|
IEC 60317-0-3 |
Specifications for Particular Types of Winding Wires - Part 0-3: General Requirements - Enamelled Round Aluminium Wire-Edition 2.2; Edition 2:1997 Consolidated with Amendments 1:1999 and 2:2004 |
|
IEC 60873-2 |
Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance for inspection and routine testing-First Edition |
|
IEC 60946 |
Binary Direct Voltage Signals for Process Measurement and Control Systems-First Edition |
|
IEC 61069-5 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 5: Assessment of System Dependability-Edition 1 |
|
IEC 61164 |
Reliability Growth - Statistical Test and Estimation Methods-Second Edition |
|
IEC 61713 |
Software Dependability Through the Software Life-Cycle Processes - Application Guide-First Edition |
|
IEC 62236-4 |
Railway applications Electromagnetic compatibility Part 4: Emission and immunity of the signalling and elecommunications apparatus-First Edition |
|
IEC 62236-5 |
Railway applications Electromagnetic compatibility Part 5: Emission and immunity of fixed power supply installations and apparatus-First Edition |
|
IEC PAS 62406 |
Real-time Ethernet TCnet (Time-Critical Control Network)-First Edition |
|
IEC TS 61081 |
Pneumatic Instruments Driven by Associated Process Gas - Safe Installation and Operating Procedures - Guidelines-First Edition |
|
IEC 21000-5 AMD 1 |
Information technology Multimedia framework (MPEG-21) - Part 5: Rights Expression Language AMENDMENT 1: MAM (Mobile And optical Media) profile-First Edition |
|
JTC1 21000-5 AMD 1 |
Information technology Multimedia framework (MPEG-21) - Part 5: Rights Expression Language AMENDMENT 1: MAM (Mobile And optical Media) profile-First Edition |
|
IEC 60068-2-44 |
Environmental Testing - Part 2: Tests - Guidance on Test T: Soldering-Second Edition; Corrigendum 1: 08/1995 |
|
IEC 60068-2-49 |
Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kc: Sulphur Dioxide Test for Contacts and Connections-First Edition |
|
IEC 60068-2-50 |
Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens-First Edition |
|
IEC 60068-2-51 |
Basic Environmental Testing Procedures Part 2: Tests Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens-First Edition |
|
IEC 60068-3-6 |
Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers-First Edition; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-7 |
|
IEC 60068-4 |
Basic Environmental Testing Procedures Part 4: Information for Specification Writers - Test Summaries-First Edition; Amendment 1: 02-1992; Amendment 2: 03-1994 |
|
IEC 60264-2-3 |
Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools Specification for non-returnable spools made from thermoplastic material-First Edition; Amendment 1 12-2003 |
|
IEC 60317-11 |
Specifications for particular types of winding wires - Part 11: Bunched solderable polyurethane enamelled round copper wires, class 130, with silk covering-Edition 3.1; Edition 3:1999 consolidated with amendment 1:2005 |
|
IEC 60356 |
Dimensions for Commutators and Slip-Rings-Edition 1 |
|
IEC 60605-3-6 |
Equipment Reliability Testing - Part 3: Preferred Test Conditions - Section 6: Test Cycle 6: Outdoor Transportable Equipment - Low Degree of Simulation-First Edition |
|
IEC 60873-1 |
Electrical and pneumatic analogue chart recorders for use in industrialprocess control systems Part 1: Methods for performance evaluation-First Edition; Replaces IEC 60873 |
|
IEC 61133 |
Railway applications - Rolling stock - Testing of rolling stock on completion of construction and before entry into service-Edition 2 |
|
IEC 61153 |
Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial- Process Control Systems - Guidance for Inspection and Routine Testing-First Edition |
|
IEC 61287-1 |
Railway applications - Power convertors installed on board rolling stock - Part 1: Characteristics and test methods-Edition 2 |
|
IEC 61326-2-1 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications-Edition 1.0;:2002 |
|
IEC 61650 |
Reliability Data Analysis Techniques - Procedures for Comparison of Two Contant Failure Rates and Two Constant Failure (Event) Intensities-First Edition |
|
IEC 61881 |
Railway Applications - Rolling Stock Equipment - Capacitors for Power Electronics-First Edition |
|
IEC 62236-1 |
Railway applications Electromagnetic compatibility Part 1: General-First Edition |
|
IEC TS 61382-1 |
Nickel/Cadmium Rechargeable Cells and Batteries for Electric Road Vehicle Propulsion Applications - Part 1: Dynamic Discharge Performance Test (DDPT) and Dynamic Endurance Test (DET)-Edition 1 |
|
IEC TS 62046 |
Safety of machinery Application of protective equipment to detect the presence of persons-First Edition |
|
IEC 60068-2-41 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests-First Edition; Amendment 1: 07-1983 |
|
IEC 60068-3-1 |
Basic Environmental Testing Procedures Part 3: Background Information Section One - Cold and Dry Heat Tests-First Edition |
|
IEC 60068-5-2 |
Environmental Testing Part 5: Guide to Drafting of Test Methods - Terms and Definitions-First Edition |
|
IEC 60317-12 |
Specifications for Particular Types of Winding Wires Part 12: Polyvinyl Acetal Enamelled Round Copper Wire, Class 120-Second Edition; Amendment 1-1997; Amendment 2: 07/2005 |
|
IEC 60317-15 |
Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180-Third Edition |
|
IEC 60317-17 |
Specifications for Particular Types of Winding Wires Part 17: Polyvinyl Acetal Enamelled Rectangular Copper Wire, Class 105-Second Edition; Amendment 1-1997; Amendment 2: 03/2005 |
|
IEC 60317-3 |
Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155Specifications for particular types of winding wires - Part 3: Polyester enamelled round copper wire, class 155-Third Edition |
|
IEC 60317-31 |
Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180-Edition 1.1; Edition 1:1990 Consolidated With Amendment 1:1997; Amendment 2:2005 |
|
IEC 60317-36 |
Specifications for Particular Types of Winding Wires - Part 36: Solderable Polyesterimide Enamelled Round Copper Wire, Class 180, with a Bonding Layer-Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-50 |
Specifications for Particular Types of Winding Wires - Part 50: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Temperature Index 200-First Edition |
|
IEC 60317-8 |
Specifications for Particular Types of Winding Wires - Part 8: Polyesterimide Enamelled Round Copper Wire, Class 180-Edition 3.2; Edition 3: 1990 Consolidated with Amendments 1: 1997 and 2: 1997 |
|
IEC 61069-2 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment Part 2: Assessment Methodology-Edition 1 |
|
IEC 61069-6 |
Industrial Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 6: Assessment of System Operability-First Edition |
|
IEC 61069-7 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 7: Assessment of System Safety-First Edition |
|
IEC 61123 |
Reliability Testing Compliance Test Plans for Success Ratio-First Edition; Replaces IEC 60605-5: 1982 |
|
IEC 61207-3 CORR 2 |
Gas analyzers - Expression of performance - Part 3: Paramagnetic oxygen analyzers CORRIGENDUM 2-Second Edition |
|
IEC 61649 |
Goodness-of-Fit Tests, Confidence Intervals and Lower Confidence Limits for Weibull Distributed Data-First Edition |
|
IEC PAS 62072 |
Natural graphite brush for rotating electrical machinery Basic characteristics-First Edition |
|
IEC PAS 62413 |
Real-time Ethernet EtherNet/IP with time synchronization-First Edition |
|
IEC TR 61374 |
Overvoltages in Traction Supply Systems-First Edition |
|
IEC 60068-2-39 |
Basic Environmental Testing Procedures Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure, and Damp Heat Test-First Edition |
|
IEC 60068-3-5 |
Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers-First Edition; Should Be Read in Conjunction with IEC 60068-3-6 and IEC 60068-3-7 |
|
IEC 60068-3-7 |
Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (with Load)-First Edition; Should Be Read in Conjunction with IEC 60068-3-5 and IEC 60068-3-6 |
|
IEC 60068-3-8 |
Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests-First Edition |
|
IEC 60317-2 |
Specifications for Particular Types of Winding Wires - Part 2: Solderable Polyurethane Enamelled Round Copper Wire, Class 130, with a Bonding Layer-Edition 3.2; Edition 3: 1990 Consolidated with Amendments 1; 1997 and 2: 1999 |
|
IEC 60317-26 |
Specifications for Particular Types of Winding Wires Part 26: Polyamide-Imide Enamelled Round Copper Wire, Class 200-Second Edition; Amendment 1-1997 |
|
IEC 60317-28 AMD 2 |
Amendment 2 Specifications for particular types of winding wires - Part 28: Polyesterimide enamelled rectangular copper wire, class 180-Edition 1.0 |
|
IEC 60317-38 |
Specifications for Particular Types of Winding Wires - Part 38: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Copper Wire, Class 200, with a Bonding Layer-Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-4 |
Specifications for Particular Types of Winding Wires - Part 4: Solderable Polyurethane Enamelled Round Copper Wire, Class 130-Edition 3.2; Edition 3: 1990 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-54 |
Specifications for Particular Types of Winding Wires - Part 54: Polyester Enamelled Round Copper Wire, Class 155L-First Edition |
|
IEC 60850 |
Railway applications - Supply voltages of traction systems-Edition 3.0 |
|
IEC 61069-3 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 3: Assessment of System Functionality-Edition 1 |
|
IEC 61377-2 |
Railway Applications - Rolling Stock - Combined Testing - Part 2: Chopper-Fed Direct Current Traction Motors and Their Control-First Edition |
|
IEC 61377-3 |
Railway Applications Rolling stock Part 3: Combined Testing of Alternating Current Motors, Fed by an Indirect Convertor, and Their Control System-Edition 1 |
|
IEC 60068-3-2 |
Basic Environmental Testing Procedures Part 3: Background Information Section Two-Combined Temperature/Low Air Pressure Tests-First Edition |
|
IEC 60310 |
Railway applications Traction transformers and inductors on board rolling stock-Third Edition |
|
IEC 60317-0-5 |
Specifications for Particular Types of Winding Wires - Part 0-5: General Requirements - Glass-Fibre Braided Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire-Second Edition |
|
IEC 60317-13 |
Specifications for Particular Types of Winding Wires - Part 13: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Copper Wire, Class 200-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997 and 2: 1997 |
|
IEC 60317-22 |
Specifications for particular types of winding wires - Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180-Third Edition |
|
IEC 60317-23 |
Specifications for Particular Types of Winding Wires - Part 23: Solderable Polyesterimide Enamelled Round Copper Wire, Class 180-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-27 |
Specifications for Particular Types of Winding Wires - Part 27: Enamelled Tape Covered Rectangular Copper Wire-Third Edition; Amendment 1: 10-1999; Corrigendum 1 04-2002 |
|
IEC 60317-32 |
Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155-Edition 1.1; Edition 1: 1990 Consolidated With Amendment 1:1997; Amendment 2:2005 |
|
IEC 60317-33 |
Specifications for Particular Types of Winding Wires - Part 33: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 200-Edition 1.1; Edition 1: 1990 Consolidated with Amendment 1: 1997; Amendment 2: 2005 |
|
IEC 60317-37 |
Specifications for Particular Types of Winding Wires - Part 37: Polyesterimide Enamelled Round Copper Wire, Class 180, with a Bonding Layer-Edition 1.2; Edition 1: 1992 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-42 |
Specifications for Particular Types of Winding Wires - Part 42: Polyester-Amide-Imide Enamelled Round Copper Wire, Class 200-First Edition |
|
IEC 60317-49 |
Specifications for Particular Types of Winding Wires - Part 49: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Temperature Index 180-First Edition |
|
IEC 60317-51 |
Specifications for Particular Types of Winding Wires - Part 51: Solderable Polyurethane Enamelled Round Copper Wire, Class 180-First Edition |
|
IEC 60317-53 |
Specifications for Particular Types of Winding Wires - Part 53: Aromatic Polyamide (Aramid) Tape Wrapped Rectangular Copper Wire, Temperature Index 220-First Edition |
|
IEC 60319 |
Presentation and Specification of Reliability Data for Electronic Components-Third Edition |
|
IEC 60494-2 |
Railway Applications - Rolling Stock - Pantographs - Characteristics and Tests - Part 2: Pantographs for Metros and Light Rail Vehicles-First Edition |
|
IEC 61326-2-6 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment-Edition 1.0;:2002 |
|
IEC 61710 |
Power Law Model - Goodness-Of-Fit Tests and Estimation Methods-Corrigendum 1 09/2001 |
|
IEC 62309 |
Dependability of products containing reused parts Requirements for functionality and tests-First Edition |
|
IEC PAS 62267 |
Railway applications Automated Urban Guided Transport (AUGT) safety requirements-Edition 1.0 |
|
IEC 60317-0-4 |
Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire-Edition 2.2; Consolidated Reprint |
|
IEC 60317-0-6 |
Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire-Edition 3.1; Consolidated reprint |
|
IEC 60317-1 |
Specifications for Particular Types of Winding Wires - Part 1: Polyvinyl Acetal Enamelled Round Copper Wire, Class 105-Edition 3.2; Edition 3: 1990 Consolidated with Amendment 1: 1997 and 2: 1997 |
|
IEC 60317-18 |
Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120-Third Edition |
|
IEC 60317-20 |
Specifications for Particular Types of Winding Wires - Part 20: Solderable Polyurethane Enamelled Round Copper Wire, Class 155-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997 and 2: 1999 |
|
IEC 60317-21 |
Specifications for Particular Types of Winding Wires - Part 21: Solderable Polyurethane Enamelled Round Copper Wire Overcoated with Polyamide, Class 155-Edition 2.2; Edition 2 Consolidated with Amendments 1:1997 and 2:1999 |
|
IEC 60317-25 |
Specifications for Particular Types of Winding Wires - Part 25: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Round Aluminium Wire, Class 200-Edition 2.2; Edition 2: 1990 Consolidated with Amendments 1: 1997 and 2: 1997 |
|
IEC 60317-30 |
Specifications for Particular Types of Winding Wires Part 30: Polyimide Enamelled Rectangular Copper Wire, Class 220-First Edition; Amendment 1-1997; Amendment 2-2005 |
|
IEC 60317-39 |
Specifications for particular types of winding wires - Part 39: Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180-First Edition; Amendment 1-1997; Amendment 2-2005 |
|
IEC 60317-40 |
Specifications for Particular Types of Winding Wires Part 40: Glass-Fibre Braided, Silicone Varnish-Treated, Bare or Enamelled Rectangular Copper Wire, Temperature Index 200-First Edition; Amendment 1-1997; Amendment 2-2005 |
|
IEC 60317-46 |
Specifications for Particular Types of Winding Wire - Part 46: Aromatic Polyimide Enamelled Round Copper Wire, Class 240-First Edition |
|
IEC 60317-47 |
Specifications for Particular Types of Winding Wires - Part 47: Aromatic Polyimide Enamelled Rectangular Copper Wire, Class 240-First Edition |
|
IEC 60317-48 |
Specifications for Particular Types of Winding Wires - Part 48: Glass-Fibre Wound Resin or Varnish Impregnated, Bare or Enamelled Round Copper Wire, Temperature Index 155-First Edition |
|
IEC 60317-52 |
Specifications for Particular Types of Winding Wires - Part 52: Aromatic Polyamide (Aramid) Tape Wrapped Round Copper Wire, Temperature Index 220-First Edition |
|
IEC 60317-7 |
Specifications for Particular Types of Winding Wires - Part 7: Polyimide Enamelled Round Copper Wire, Class 220-Edition 3.2; Edition 3: 1990 Consolidated with Amendments 1: 1997 and 2: 1997 |
|
IEC 61069-4 |
Industrial Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 4: Assessment of System Performance-First Edition; Corrigendum- 1997 |
|
IEC 61069-8 |
Industrial-Process Measurement and Control - Evaluation of System Properties for the Purpose of System Assessment - Part 8: Assessment of Non-Task-Related System Properties-First Edition |
|
IEC 61297 |
Industrial-Process Control Systems - Classification of Adaptive Controllers for the Purpose of Evaluation-First Edition |
|
IEC PAS 62411 |
Real-time Ethernet PROFINET IO-Edition 1 |
|
IEC PAS 62412 |
Real-time Ethernet P-NET on IP specification-First Edition |
|
IEC 60264-3-3 |
Packaging of Winding Wires Part 3: Taper Barrelled Delivery Spools Section 3 - Specification for Non-Returnable Spools Made from Thermoplastic Material-First Edition; Amendment 1:12/2003 |
|
IEC 60264-3-4 |
Packaging of Winding Wires - Part 3-4: Taper Barrelled Delivery Spools - Basic Dimensions of Containers for Taper Barrelled Delivery Spools-Second Edition |
|
IEC 60264-5-2 |
Packaging of Winding Wires - Part 5-2: Cylindrical Barrelled Delivery Spools with Conical Flanges - Specification for Returnable Spools Made from Thermoplastic Material-First Edition |
|
IEC 61152 |
Dimensions of Metal-Sheathed Thermometer Elements-First Edition |
|
IEC 61326-2-2 |
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems-Edition 1.0;:2002 |
|
IEC PAS 62410 |
Real-Time Ethernet SERCOS III-First Edition |
|
IEC 60264-2-1 |
Packaging of winding wires Part 2-1: Cylindrical barrelled delivery spools Basic dimensions-First Edition; Amendment 1: 7/2003 |
|
IEC 60264-3-2 |
Packaging of Winding Wires - Part 3-2: Taper Barrelled Delivery Spools - Specification for Returnable Spools Made from Thermoplastic Materials-Second Edition |
|
IEC 60264-3-5 |
Packaging of Winding Wires - Part 3-5: Taper Barrelled Delivery Spools - Specification for Spool Containers Made from Thermoplastic Material-Second Edition |
|
IEC 60264-4-1 |
Packaging of Winding Wires - Part 4-1: Methods of Test - Delivery Spools Made from Thermoplastic Materials-Second Edition |
|
IEC 60264-5-1 |
Packaging of Winding Wires - Part 5-1: Cylindrical Barrelled Delivery Spools with Conical Flanges - Basic Dimensions-First Edition; Amendment 1: 08/2003 |
|
IEC 60264-2-2 |
Packaging of Winding Wires - Part 2-2: Cylindrical Barrelled Delivery Spools - Specification for Returnable Spools Made from Thermoplastic Material-First Edition; Amendment 1 12-2003 |
|
IEC 60264-3-1 |
Packaging of Winding Wires - Part 3-1: Taper Barrelled Delivery Spools - Basic Dimensions-Second Edition; Amendment 1: 08/2003 |
|
IEC 60317-29 |
Specifications for Particular Types of Winding Wires Part 29: Polyester or Polyesterimide Overcoated with Polyamide-Imide Enamelled Rectangular Copper Wire, Class 200-First Edition; Amendment 1-1997 |
|
IEC 60317-34 |
Specifications for Particular Types of Winding Wires - Part 34: Polyester Enamelled Round Copper Wire, Class 130 L-Second Edition |
|
IEC 60317-44 |
Specifications for Particular Types of Winding Wires - Part 44: Aromatic Polyimide Tape Wrapped Rectangular Copper Wire, Class 240-First Edition |
|
IEC 61163-2 |
Reliability Stress Screening - Part 2: Electronic Components-First Edition |
|
IEC 60264-4-2 |
Packaging of Winding Wires Part 4: Methods of Test Section 2: Containers Made from Thermoplastic Material for Taper Barrelled Delivery Spools-First Edition; Amendment 1: 12/2003 |
|
IEC 61163-1 |
Reliability stress screening - Part 1: Repairable assemblies manufactured in lots-Edition 2.0 |