|
ANSI C136.17 |
Roadway Lighting Equipment - Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps - Mechanical Interchangeability of Refractors |
|
ANSI C136.2 |
American National Standard for Roadway Lighting Equipment - Luminaires Voltage Classification-Revision of ANSI C136.2-1985 |
|
ANSI C136.5 |
American National Standard for Roadway Lighting Equipment - Film Cutouts-Revision of ANSI C136.5-1989 |
|
IEEE 1 |
Recommended Practice - General Principles for Temperature Limits in the Rating of Electrical Equipment and for the Evaluation of Electrical Insulation |
|
IEEE 100 |
The Authoritative Dictionary of IEEE Standards Terms-Seventh Edition |
|
IEEE 1017 |
Recommended Practice for Field Testing Electric Submersible Pump Cable |
|
IEEE 1018 |
Recommended Practice for Specifying Electric Submersible Pump CableEthylene-Propylene Rubber Insulation |
|
IEEE 1019 |
Recommended Practice for Specifying Electric Submersible Pump CablePolypropylene Insulation |
|
IEEE 1020 |
Guide for Control of Small Hydroelectric Power Plants |
|
IEEE 1023 |
Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities |
|
IEEE 1043 |
Recommended Practice for Voltage-Endurance Testing of Form-Wound Bars and Coils |
|
IEEE 1068 |
Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical Industry |
|
IEEE 1082 |
Guide for Incorporating Human Action Reliability Analysis for Nuclear Power Generating Stations |
|
IEEE 11 |
Standard for Rotating Electric Machinery for Rail and Road Vehicles |
|
IEEE 1106 |
Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vended Nickel-Cadmium Batteries for Stationary Applications |
|
IEEE 1125 |
Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment |
|
IEEE 115 |
Guide: Test Procedures for Synchronous Machines Part I Acceptance and Performance Testing Part II Test Procedures and Parameter Determination for Dynamic Analysis |
|
IEEE 1160 |
Standard Test Procedures for High-Purity Germanium Crystals for Radiation Detectors |
|
IEEE 1187 |
Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications |
|
IEEE 1189 |
Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications |
|
IEEE 1202 |
Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies |
|
IEEE 1205 |
Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations |
|
IEEE 1214 |
Standard Multichannel Analyzer (MCA) Histogram Data Interchange Format for Nuclear Spectroscopy |
|
IEEE 1242 |
Guide for Specifying and Selecting Power, Control, and Special- Purpose Cable for Petroleum and Chemical Plants |
|
IEEE 1249 |
Guide for Computer-Based Control for Hydroelectric Power Plant Automation |
|
IEEE 125 |
Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators |
|
IEEE 1250 |
Guide for Service to Equipment Sensitive to Momentary Voltage Disturbances |
|
IEEE 1289 |
Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations |
|
IEEE 1290 |
Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations |
|
IEEE 1310 |
Trial Use Recommended Practice for Thermal Cycle Testing of Form- Wound Stator Bars and Coils for Large Generators |
|
IEEE 1458 |
Recommended Practice for the Selection, Field Testing, and Life Expectancy of Molded Case Circuit Breakers for Industrial Applications |
|
IEEE 1475 |
Standard for the Functioning of and Interfaces Among Propulsion, Friction Brake, and Train-Borne Master Control on Rail Rapid Transit Vehicles |
|
IEEE 1477 |
Standard for Passenger Information System for Rail Transit Vehicles |
|
IEEE 1483 |
Standard for Verification of Vital Functions in Processor-Based Systems Used in Rail Transit Control |
|
IEEE 1570 |
Standard for the Interface Between the Rail Subsystem and the Highway Subsystem at a Highway Rail Intersection |
|
IEEE 1580 |
Recommended Practice for Marine Cable for Use on Shipboard and Fixed or Floating Marine Platforms |
|
IEEE 1584 |
Guide for Performing Arc-Flash Hazard Calculations-Contact IHS Customer Support to obtain the Calculators/Spreadsheets associated with this Standard; Amendment A: 09/23/2004 |
|
IEEE 1616 |
Standard for Motor Vehicle Event Data Recorders (MVEDRs) |
|
IEEE 259 |
Standard Test Procedure for Evaluation of Systems of Insulation for Dry- Type Specialty and General-Purpose Transformers |
|
IEEE 277 |
Recommended Practice for Cement Plant Power Distribution |
|
IEEE 292 |
Specification Format for Single-Degree-Of-Freedom Spring-Restrained Rate Gyros |
|
IEEE 293 |
Test Procedure for Single-Degree-of-Freedom Spring-Restrained Rate Gyros |
|
IEEE 300 |
Standard Test Procedures for Semiconductor Charged-Particle Detectors |
|
IEEE 301 |
Standard Test Procedures for Amplifiers and Preamplifiers Used with Detectors of Ionizing Radiation |
|
IEEE 308 |
Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations |
|
IEEE 309 |
Standard Test Procedures and Bases for Geiger-Mueller Counters-ANSI N42.3 |
|
IEEE 317 |
Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
|
IEEE 323 |
Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
|
IEEE 325 |
Standard Test Procedures for Germanium Gamma-Ray Detectors |
|
IEEE 334 |
Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations |
|
IEEE 338 |
Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems |
|
IEEE 344 |
Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations |
|
IEEE 352 |
Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems |
|
IEEE 379 |
Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems |
|
IEEE 382 |
Standard for Qualification of Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power Plants |
|
IEEE 383 |
Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations |
|
IEEE 398 |
Standard Test Procedures for Photomultipliers for Scintillation Counting and Glossary for Scintillation Counting Field |
|
IEEE 420 |
Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations |
|
IEEE 421.4 |
Guide for the Preparation of Excitation System Specifications |
|
IEEE 43 |
Recommended Practice for Testing Insulation Resistance of Rotating Machinery |
|
IEEE 434 |
Guide for Functional Evaluation of Insulation Systems for Large High- Voltage Machines |
|
IEEE 449 |
Standard for Ferroresonant Voltage Regulators |
|
IEEE 45 |
Recommended Practice for Electrical Installations on Shipboard |
|
IEEE 475 |
Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
|
IEEE 499 |
Recommended Practice for Cement Plant Electric Drives and Related Electrical Equipment |
|
IEEE 515 |
Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Industrial Applications |
|
IEEE 515.1 |
Recommended Practice for the Testing, Design, Installation, and Maintenance of Electrical Resistance Heat Tracing for Commercial Applications |
|
IEEE 519 |
Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems-Second Printing - 6/15/2004 |
|
IEEE 522 |
Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines |
|
IEEE 535 |
Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations |
|
IEEE 572 |
Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations |
|
IEEE 577 |
Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Facilities |
|
IEEE 602 |
Recommended Practice for Electric Systems in Health Care Facilities- IEEE White Book (Color Book Series) |
|
IEEE 603 |
Standard Criteria for Safety Systems for Nuclear Power Generating Stations |
|
IEEE 62 |
Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
|
IEEE 620 |
Guide for the Presentation of Thermal Limit Curves for Squirrel Cage Induction Machines |
|
IEEE 622 |
Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Stations |
|
IEEE 625 |
Recommended Practices to Improve Electrical Maintenance and Safety in the Cement Industry |
|
IEEE 628 |
Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
|
IEEE 635 |
Guide for Selection and Design of Aluminum Sheaths for Power Cables |
|
IEEE 637 |
Guide for the Reclamation of Insulating Oil and Criteria for Its Use |
|
IEEE 647 |
Standard Specification Format Guide and Test Procedure for Single- Axis Laser Gyros |
|
IEEE 649 |
Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
|
IEEE 650 |
Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations |
|
IEEE 690 |
Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
|
IEEE 692 |
Standard Criteria for Security Systems for Nuclear Power Generating Stations |
|
IEEE 693 |
Recommended Practice for Seismic Design of Substations |
|
IEEE 739 |
Recommended Practice for Energy Management in Industrial and Commercial Facilities-IEEE Bronze Book (Color Book Series) |
|
IEEE 7- 4.3.2 |
IEEE Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations |
|
IEEE 741 |
Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
|
IEEE 765 |
Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations |
|
IEEE 813 |
Format Guide and Test Procedure for Two-Degree-of-Freedom Dynamically Tuned Gyros |
|
IEEE 833 |
Recommended Practice for the Protection of Electric Equipment in Nuclear Power Generating Stations from Water Hazards |
|
IEEE 841 |
Standard for Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 370 kW (500 hp) |
|
IEEE 844 |
Recommended Practice for Electrical Impedance, Induction, and Skin Effect Heating of Pipelines and Vessels-Errata - 8/15/2005 |
|
IEEE 845 |
Guide for the Evaluation of Human-System Performance in Nuclear Power Generating Stations |
|
IEEE 933 |
Guide for the Definition of Reliability Program Plans for Nuclear Power Generating Stations |
|
IEEE 946 |
Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations |
|
IEEE 95 |
Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage |
|
IEEE 951 |
Guide to the Assembly and Erection of Metal Transmission Structures |
|
IEEE 952 |
Standard Specification Format Guide and Test Procedure for Single- Axis Interferometric Fiber Optic Gyros |
|
IEEE 98 |
Standard for the Preparation of Test Procedures for the Thermal Evaluation of Solid Electrical Insulating Materials |
|
IEEE 99 |
Recommended Practice for the Preparation of Test Procedures for the Thermal Evaluation of Insulation Systems for Electric Equipment |
|
IEEE C135.22 |
Zinc-Coated Ferrous Pole-Top Insulator Pins with Lead Threads for Overhead Line Construction |
|
IEEE C135.30 |
Zinc-Coated Ferrous Ground Rods for Overhead or Underground Line Construction |
|
IEEE C135.31 |
Zinc-Coated Ferrous Single and Double Upset Spool Insulator Bolts for Overhead Line Construction |
|
IEEE C135.33 |
Galvanized Ferrous Crossarm Gains for Overhead Line Construction |
|
IEEE C135.35 |
Zinc-Coated Ferrous Cable Racks and Cable Rack Hooks for Underground Line Construction |
|
IEEE C135.6 |
Zinc-Coated Ferrous Crossarm Braces for Overhead Line Construction |
|
IEEE C136.11 |
American National Standard for Roadway Lighting Equipment - Multiple Sockets-Revision of ANSI C136.11-1988 |
|
IEEE C136.17 |
Roadway Lighting Equipment - Enclosed Side-Mounted Luminaires for Horizontal-Burning High-Intensity-Discharge Lamps - Mechanical Interchangeability of Refractors |
|
IEEE C136.18 |
American National Standard for High-Mast Side-Mounted Luminaires for Horizontal- or Vertical-Burning High-Intensity Discharge Lamps Used in Roadway Lighting Equipment |
|
IEEE C136.2 |
American National Standard for Roadway Lighting Equipment - Luminaires Voltage Classification-Revision of ANSI C136.2-1985 |
|
IEEE C136.23 |
American National Standard for Roadway Lighting Equipment - Enclosed Architectural Luminaires |
|
IEEE C136.27 |
Roadway Lighting Equipment - Tunnel Lighting Luminaires |
|
IEEE C136.31 |
American National Standard for Roadway Lighting Equipment - Luminaire Vibration |
|
IEEE C136.32 |
American National Standard for Roadway Lighting Equipment - Enclosed Setback Luminaires and Directional Floodlights for High-Intensity-Discharge Lamps |
|
IEEE C136.4 |
American National Standard for Roadway Lighting Equipment - Series Sockets and Series-Sockets Receptacles-Revision of ANSI C136.4-1989 |
|
IEEE C136.5 |
American National Standard for Roadway Lighting Equipment - Film Cutouts-Revision of ANSI C136.5-1989 |
|
IEEE C37.105 |
Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations |
|
IEEE C37.110 |
Guide for the Application of Current Transformers Used for Protective Relaying Purposes |
|
IEEE C37.122 |
Standard for Gas-Insulated Substations |
|
IEEE C37.18 |
Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery |
|
IEEE C37.40 |
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
|
IEEE C37.40B SUPP |
Standard Service Conditions and Definitions for External Fuses for Shunt Capacitors-Supplement to IEEE Std C37.40-1993 |
|
IEEE C37.41 |
Standard Design Test for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
|
IEEE C37.81 |
Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
|
IEEE C37.82 |
Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
|
IEEE C57.106 |
Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
|
IEEE C57.12.56 |
Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers |
|
IEEE C57.13.2 |
Standard Conformance Test Procedures for Instrument Transformers |
|
IEEE C57.19.00 |
General Requirements and Test Procedure for Outdoor Power Apparatus Bushings |
|
IEEE C62.23 |
Application Guide for Surge Protection of Electric Generating Plants |
|
IEEE N317 |
Performance Criteria for Instrumentation Used for Inplant Plutonium Monitoring |
|
IEEE N320 |
Performance Specifications for Reactor Emergency Radiological Monitoring Instrumentation |
|
IEEE N322 |
American National Standard Inspection, Test, Construction, and Performance Requirements for Direct Reading Electrostatic/Electroscope Type Dosimeters |
|
IEEE N323 |
Radiation Protection Instrumentation Test and Calibration |
|
IEEE N323A |
Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments |
|
IEEE N323B |
American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instrumentation for Near Background Operation |
|
IEEE N323D |
Installed Radiation Protection Instrumentation |
|
IEEE N42.12 |
American National Standard Calibration and Usage of Thallium Activated Sodium Iodide Detector Systems for Assay of Radionuclides |
|
IEEE N42.13 |
Calibration and Usage of "Dose Calibrator" Ionization Chambers for the Assay of Radionuclides |
|
IEEE N42.14 |
Calibration and Use of Germanium Spectrometers for the Measurement of Gamma-Ray Emission Rates of Radionuclides |
|
IEEE N42.15 |
American National Standard Check Sources for and Verification of Liquid-Scintillation Counting Systems |
|
IEEE N42.17B |
American National Standard Performance Specifications for Health Physics Instrumentation-Occupational Airborne Radioactivity Monitoring Instrumentation |
|
IEEE N42.17C |
American National Standard Performance Specifications for Health Physics Instrumentation - Portable Instrumentation for Use in Extreme Environmental Conditions |
|
IEEE N42.18 |
Specification and Performance of On-Site Instrumentation for Continuously Monitoring Radioactivity in Effluents-Redesignation of N13.10-74 |
|
IEEE N42.22 |
American National Standard - Traceability of Radioactive Sources to the National Institute of Standards and Technology (NIST) and Associated Instrument Quality Control |
|
IEEE N42.23 |
American National Standard Measurement and Associated Instrument Quality Assurance for Radioassay Laboratories |
|
IEEE N42.26 |
Radiation Protection Instrumentation - Monitoring Equipment - Personal Warning Devices for X and Gamma Radiations-Adoption of IEC 1344: 1996 |
|
IEEE N42.4 |
Standard for High Voltage Connectors for Nuclear Instruments |
|
IEEE N42.5 |
Bases for GM Counter Tubes |
|
IEEE N42.6 |
Interrelationship of Quartz-Fiber Electrometer Type Exposure Meters and Companion Exposure Meter Chargers |
|
IEEE N449.1 |
Procedures for Periodic Inspection of Cobalt - 60 and Cesium - 137 Teletherapy Equipment |