|
IEEE 100 |
The Authoritative Dictionary of IEEE Standards Terms-Seventh Edition |
|
IEEE 1010 |
Guide for Control of Hydroelectric Power Plants |
|
IEEE 1013 |
Recommended Practice for Sizing Lead-Acid Batteries for Photovoltaic (PV) Systems |
|
IEEE 1015 |
Recommended Practice for Applying Low-Voltage Circuit Breakers Used in Industrial and Commercial Power Systems-IEEE Blue Book (Color Book Series) |
|
IEEE 1023 |
Recommended Practice for the Application of Human Factors Engineering to Systems, Equipment, and Facilities of Nuclear Power Generating Stations and Other Nuclear Facilities |
|
IEEE 1031 |
Guide for the Functional Specification of Transmission Static Var Compensators |
|
IEEE 1036 |
Guide for Application of Shunt Power Capacitors |
|
IEEE 1048 |
Guide for Protective Grounding of Power Lines |
|
IEEE 1050 |
Guide for Instrumentation and Control Equipment Grounding in Generating Stations |
|
IEEE 1068 |
Recommended Practice for the Repair and Rewinding of Motors for the Petroleum and Chemical Industry |
|
IEEE 1095 |
Guide for Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
|
IEEE 1100 |
Recommended Practice for Powering and Grounding Electronic Equipment-IEEE Emerald Book (Color Book Series) |
|
IEEE 1106 |
Recommended Practice for Installation, Maintenance, Testing, and Replacement of Vended Nickel-Cadmium Batteries for Stationary Applications |
|
IEEE 1110 |
Guide for Synchronous Generator Modeling Practices and Applications in Power System Stability Analyses |
|
IEEE 1115 |
Recommended Practice for Sizing Nickel-Cadmium Batteries for Stationary Applications |
|
IEEE 112 |
Standard Test Procedure for Polyphase Induction Motors and Generators |
|
IEEE 1120 |
Guide for the Planning, Design, Installation, and Repair of Submarine Power Cable Systems |
|
IEEE 1127 |
Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility |
|
IEEE 1138 |
Standard Construction of Composite Fiber Optic Overhead Ground Wire (OPGW) for Use on Electric Utility Power Lines |
|
IEEE 114 |
Test Procedure for Single-Phase Induction Motors |
|
IEEE 1143 |
Guide on Shielding Practice for Low Voltage Cables |
|
IEEE 1147 |
Guide for the Rehabilitation of Hydroelectric Power Plants |
|
IEEE 115 |
Guide: Test Procedures for Synchronous Machines Part I Acceptance and Performance Testing Part II Test Procedures and Parameter Determination for Dynamic Analysis |
|
IEEE 1159 |
Recommended Practice for Monitoring Electric Power Quality |
|
IEEE 1159.3 |
IEEE Recommended Practice for the Transfer of Power Quality Data |
|
IEEE 1184 |
Guide for the Selection and Sizing of Batteries for Uninterruptible Power Systems |
|
IEEE 1185 |
Guide for Installation Methods for Generating Station Cables |
|
IEEE 1187 |
Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Storage Batteries for Stationary Applications |
|
IEEE 1189 |
Guide for Selection of Valve-Regulated Lead-Acid (VRLA) Batteries for Stationary Applications |
|
IEEE 120 |
Master Test Guide for Electrical Measurements in Power Circuits-ASME PTC 19.6-1955 |
|
IEEE 1202 |
Standard for Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies |
|
IEEE 1205 |
Guide for Assessing, Monitoring, and Mitigating Aging Effects on Class 1E Equipment Used in Nuclear Power Generating Stations |
|
IEEE 1207 |
Guide for the Application of Turbine Governing Systems for Hydroelectric Generating Units |
|
IEEE 122 |
Recommended Practice for Functional and Performance Characteristics of Control Systems for Steam Turbine-Generator Units |
|
IEEE 1222 |
IEEE Standard for All-Dielectric Self-Supporting Fiber Optic Cable |
|
IEEE 1243 |
Guide for Improving the Lightning Performance of Transmission Lines |
|
IEEE 1246 |
IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
|
IEEE 1247 |
Standard for Interrupter Switches for Alternating Current, Rated Above 1000 Volts |
|
IEEE 1248 |
Guide for the Commissioning of Electrical Systems in Hydroelectric Power Plants |
|
IEEE 1249 |
Guide for Computer-Based Control for Hydroelectric Power Plant Automation |
|
IEEE 125 |
Recommended Practice for Preparation of Equipment Specifications for Speed-Governing of Hydraulic Turbines Intended to Drive Electric Generators |
|
IEEE 1267 |
Trial-Use Guide for Development of Specification for Turnkey Substation Projects |
|
IEEE 1268 |
Guide for Safety in the Installation of Mobile Substation Equipment |
|
IEEE 1289 |
Guide for the Application of Human Factors Engineering in the Design of Computer-Based Monitoring and Control Displays for Nuclear Power Generating Stations |
|
IEEE 1290 |
Guide for Motor Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power Generating Stations |
|
IEEE 1299 |
Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems |
|
IEEE 1300 |
Guide for Cable Connections for Gas-Insulated Substations |
|
IEEE 1307 |
Standard for Fall Protection for Utility Work |
|
IEEE 1313.1 |
Standard for Insulation Coordination - Definitions, Principles, and Rules |
|
IEEE 1313.2 |
Guide for the Application of Insulation Coordination |
|
IEEE 1349 |
IEEE Guide for the Application of Electric Motors in Class 1, Division 2 Hazardous (Classified) Locations |
|
IEEE 1366 |
Guide for Electric Power Distribution Reliability Indices |
|
IEEE 1375 |
Guide for the Protection of Stationary Battery Systems |
|
IEEE 1402 |
Guide for Electric Power Substation Physical and Electronic Security |
|
IEEE 141 |
Recommended Practice for Electric Power Distribution for Industrial Plants-IEEE Red Book (Color Book Series); Correction Sheet - July 23, 1997; Correction Sheet June 9, 1998 |
|
IEEE 1410 |
Guide for Improving the Lightning Performance of Electric Power Overhead Distribution Lines |
|
IEEE 142 |
Recommended Practice for Grounding of Industrial and Commercial Power Systems-IEEE Green Book (Color Book Series); Correction Sheet - May 1993; Corrected Edition April 1996 |
|
IEEE 1434 |
Guide to the Measurement of Partial Discharges in Rotating Machinery-Errata - 8/19/2005 |
|
IEEE 1453 |
IEEE Recommended Practice for Measurement and Limits of Voltage Fluctuations and Associated Light Flicker on AC Power Systems |
|
IEEE 1511 |
Guide for Investigating and Analyzing Power Cable, Joint, and Termination Failures on Systems Rated 5 kV through 46 kV |
|
IEEE 1531 |
Guide for Application and Specification of Harmonic Filters |
|
IEEE 1547 |
IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
|
IEEE 1547.1 |
IEEE Standard Conformance Test Procedures for Equipment Interconnecting Distributed Resources with Electric Power Systems |
|
IEEE 1584 |
Guide for Performing Arc-Flash Hazard Calculations-Contact IHS Customer Support to obtain the Calculators/Spreadsheets associated with this Standard; Amendment A: 09/23/2004 |
|
IEEE 1590 |
Recommended Practice for the Electrical Protection of Optical Fiber Communication Facilities Serving, or Connected to, Electrical Supply Locations |
|
IEEE 1646 |
Standard Communication Delivery Time Performance Requirements for Electric Power Substation Automation |
|
IEEE 18 |
Standard for Shunt Power Capacitors |
|
IEEE 241 |
Recommended Practice for Electric Power Systems in Commercial Buildings-IEEE Gray Book (Color Book Series) |
|
IEEE 242 |
Recommended Practice for Protection and Coordination of Industrial and Commercial Power Systems-IEEE Buff Book (Color Book Series) |
|
IEEE 259 |
Standard Test Procedure for Evaluation of Systems of Insulation for Dry- Type Specialty and General-Purpose Transformers |
|
IEEE 286 |
Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
|
IEEE 295 |
Standard for Electronics Power Transformers |
|
IEEE 303 |
Recommended Practice for Auxiliary Devices for Rotating Electrical Machines in Class I, Division 2 and Zone 2 Locations |
|
IEEE 308 |
Standard Criteria for Class 1E Power Systems for Nuclear Power Generating Stations |
|
IEEE 317 |
Standard for Electric Penetration Assemblies in Containment Structures for Nuclear Power Generating Stations |
|
IEEE 32 |
Standard Requirements, Terminology, and Test Procedure for Neutral Grounding Devices |
|
IEEE 323 |
Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations |
|
IEEE 334 |
Standard for Qualifying Continuous Duty Class 1E Motors for Nuclear Power Generating Stations |
|
IEEE 338 |
Standard Criteria for the Periodic Surveillance Testing of Nuclear Power Generating Station Safety Systems |
|
IEEE 344 |
Recommended Practice for Seismic Qualification of Class 1E Equipment for Nuclear Power Generating Stations |
|
IEEE 352 |
Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems |
|
IEEE 367 |
Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault |
|
IEEE 379 |
Standard Application of the Single-Failure Criterion to Nuclear Power Generating Station Safety Systems |
|
IEEE 382 |
Standard for Qualification of Actuators for Power-Operated Valve Assemblies with Safety-Related Functions for Nuclear Power Plants |
|
IEEE 383 |
Standard for Qualifying Class 1E Electric Cables and Field Splices for Nuclear Power Generating Stations |
|
IEEE 384 |
Standard Criteria for Independence of Class 1E Equipment and Circuits |
|
IEEE 386 |
Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 V |
|
IEEE 387 |
Standard Criteria for Diesel-Generator Units Applied as Standby Power Generating Stations |
|
IEEE 388 |
Standard for Transformers and Inductors in Electronic Power Conversion Equipment |
|
IEEE 399 |
Recommended Practice for Industrial and Commercial Power Systems Analysis-IEEE Brown Book (Color Book Series) |
|
IEEE 4 |
Standard Techniques for High-Voltage Testing-Amendment 4a: 03/17/2001 |
|
IEEE 400 |
Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems |
|
IEEE 400.2 |
Guide for Field Testing of Shielded Power Cable Systems Using Very Low Frequency (VLF) |
|
IEEE 404 |
Standard for Extruded and Laminated Dielectric Shielded Cable Joints Rated 2500 V to 500 000 V |
|
IEEE 420 |
Standard for the Design and Qualification of Class 1E Control Boards, Panels, and Racks Used in Nuclear Power Generating Stations |
|
IEEE 421.1 |
Standard Definitions for Excitation Systems for Synchronous Machines-Revision of IEEE Std 421-1972 |
|
IEEE 421.2 |
Guide for Identification, Testing, and Evaluation of the Dynamic Performance of Excitation Control Systems-Revision of 421A-1978 |
|
IEEE 421.3 |
Standard for High-Potential Test Requirements for Excitation Systems for Synchronous Machines |
|
IEEE 421.4 |
Guide for the Preparation of Excitation System Specifications |
|
IEEE 421.5 |
Recommended Practice for Excitation System Models for Power System Stability Studies |
|
IEEE 434 |
Guide for Functional Evaluation of Insulation Systems for Large High- Voltage Machines |
|
IEEE 446 |
Recommended Practice for Emergency and Standby Power Systems for Industrial and Commercial Applications-IEEE Orange Book (Color Book Series) |
|
IEEE 450 |
Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications |
|
IEEE 48 |
Standard Test Procedures and Requirements for Alternating-Current Cable Terminations 2.5 kV Through 765 kV |
|
IEEE 484 |
Recommended Practice for Installation Design and Installation of Vented Lead-Acid Batteries for Stationary Applications |
|
IEEE 485 |
Recommended Practice for Sizing Lead-Acid Batteries for Stationary Applications |
|
IEEE 487 |
Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Power Locations |
|
IEEE 492 |
Guide for Operation and Maintenance of Hydro-Generators |
|
IEEE 493 |
Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems-IEEE Gold Book (Color Book Series) |
|
IEEE 497 |
Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations |
|
IEEE 505 |
Standard Nomenclature for Generating Station Electric Power Systems |
|
IEEE 516 |
Guide for Maintenance Methods on Energized Power Lines |
|
IEEE 519 |
Recommended Practices and Requirements for Harmonic Control in Electrical Power Systems-Second Printing - 6/15/2004 |
|
IEEE 522 |
Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines |
|
IEEE 524 |
Guide to the Installation of Overhead Transmission Line Conductors |
|
IEEE 525 |
Guide for the Design and Installation of Cable Systems in Substations |
|
IEEE 532 |
Guide for Selecting and Testing Jackets for Underground Cables |
|
IEEE 535 |
Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations |
|
IEEE 539 |
Standard Definitions of Terms Relating to Corona and Field Effects of Overhead Power Lines |
|
IEEE 572 |
Standard for Qualification of Class 1E Connection Assemblies for Nuclear Power Generating Stations |
|
IEEE 576 |
Recommended Practice for Installation, Termination, and Testing of Insulated Power Cable as Used in Industrial and Commercial Applications |
|
IEEE 577 |
Standard Requirements for Reliability Analysis in the Design and Operation of Safety Systems for Nuclear Facilities |
|
IEEE 602 |
Recommended Practice for Electric Systems in Health Care Facilities- IEEE White Book (Color Book Series) |
|
IEEE 603 |
Standard Criteria for Safety Systems for Nuclear Power Generating Stations |
|
IEEE 605 |
Guide for Design of Substation Rigid-Bus Structures |
|
IEEE 62 |
Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors |
|
IEEE 62.2 |
Guide for Diagnostic Field Testing of Electric Power ApparatusElectrical Machinery |
|
IEEE 622 |
Recommended Practice for the Design and Installation of Electric Heat Tracing Systems for Nuclear Power Generating Stations |
|
IEEE 628 |
Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations |
|
IEEE 635 |
Guide for Selection and Design of Aluminum Sheaths for Power Cables |
|
IEEE 638 |
Qualification of Class 1E Transformers for Nuclear Power Generating Stations-Corrections April 7, 1999 |
|
IEEE 643 |
Guide for Power-Line Carrier Applications |
|
IEEE 649 |
Standard for Qualifying Class 1E Motor Control Centers for Nuclear Power Generating Stations |
|
IEEE 650 |
Standard for Qualification of Class 1E Static Battery Chargers and Inverters for Nuclear Power Generating Stations |
|
IEEE 665 |
Standard for Generating Station Grounding |
|
IEEE 666 |
Design Guide for Electric Power Service Systems for Generating Stations |
|
IEEE 67 |
Guide for Operation and Maintenance of Turbine Generators |
|
IEEE 690 |
Standard for the Design and Installation of Cable Systems for Class 1E Circuits in Nuclear Power Generating Stations |
|
IEEE 691 |
IEEE Guide for Transmission Structure Foundation Design and Testing |
|
IEEE 693 |
Recommended Practice for Seismic Design of Substations |
|
IEEE 738 |
Standard for Calculating the Current-Temperature Relationship of Bare Overhead Conductors-Contact IHS Customer Support to obtain the zip file associated with this Standard |
|
IEEE 7- 4.3.2 |
IEEE Standard Criteria for Digital Computers in Safety Systems of Nuclear Power Generating Stations |
|
IEEE 741 |
Standard Criteria for the Protection of Class 1E Power Systems and Equipment in Nuclear Power Generating Stations |
|
IEEE 762 |
Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity |
|
IEEE 765 |
Standard for Preferred Power Supply (PPS) for Nuclear Power Generating Stations |
|
IEEE 80 |
Guide for Safety in AC Substation Grounding |
|
IEEE 81 |
Guide for Measuring Earth Resistivity, Ground Impedance, and Earth Surface Potentials of a Ground System |
|
IEEE 81.2 |
Guide for Measurement of Impedance and Safety Characteristics of Large, Extended or Interconnected Grounding Systems |
|
IEEE 82 |
Standard Test Procedure for Impulse Voltage Tests on Insulated Conductors |
|
IEEE 824 |
Standard for Series Capacitor Banks in Power Systems |
|
IEEE 835 |
Standard Power Cable Ampacity Tables-Supersedes ICEA P-46- 426 |
|
IEEE 835 INTRO |
Standard Power Cable Ampacity Tables |
|
IEEE 835 PG 1 - 72 |
Standard Power Cable Ampacity Tables - 0.6 to 5 kV Unshielded Single Conductor Extruded Dielectric Cable |
|
IEEE 835 PG 337 - 680 |
Standard Power Cable Ampacity Tables - 5 to 15 kV Shielded Single Conductor Extruded Dielectric Power Cable |
|
IEEE 837 |
IEEE Standard for Qualifying Permanent Connections Used in Substation Grounding |
|
IEEE 841 |
Standard for Petroleum and Chemical Industry - Severe Duty Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors - Up to and Including 370 kW (500 hp) |
|
IEEE 848 |
Standard Procedure for the Determination of the Ampacity Derating of Fire-Protected Cables |
|
IEEE 902 |
Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems-IEEE Yellow Book |
|
IEEE 946 |
Recommended Practice for the Design of DC Auxiliary Power Systems for Generating Stations |
|
IEEE 95 |
Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) with High Direct Voltage |
|
IEEE 951 |
Guide to the Assembly and Erection of Metal Transmission Structures |
|
IEEE 957 |
Guide for Cleaning Insulators |
|
IEEE 958 |
Guide for the Application of AC Adjustable-Speed Drives on 2 400 13 800 V Auxiliary Systems in Electric Power Generating Stations |
|
IEEE 979 |
Guide for Substation Fire Protection |
|
IEEE 980 |
Guide for Containment and Control of Oil Spills in Substations |
|
IEEE 987 |
Guide for Application of Composite Insulators |
|
IEEE 998 |
Guide for Direct Lightning Stroke Shielding of Substations |
|
IEEE C135.1 |
Zinc-Coated Steel Bolts and Nuts for Overhead Line Construction |
|
IEEE C2 |
National Electrical Safety Code |
|
IEEE C37.010 |
Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis |
|
IEEE C37.012 |
Application Guide for Capacitance Current Switching for AC High- Voltage Circuit Breakers |
|
IEEE C37.013 |
Standard for AC High-Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis |
|
IEEE C37.015 |
Application Guide for Shunt Reactor Switching |
|
IEEE C37.04 |
IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers-Amendment A: 07/25/2003; Errata 10/11/2005; Errata 11/29/2005 |
|
IEEE C37.06 |
AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Preferred Ratings and Related Required Capabilities-Replaces NEMA C37.06- 2000 |
|
IEEE C37.06.1 |
Guide for High-Voltage Circuit Breakers Rated on Symmetrical Current Basis Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times - Replaces NEMA C37.06.1-2000 |
|
IEEE C37.09 |
Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Amendment 1: 03/20/2005 |
|
IEEE C37.1 |
Standard Definition, Specification, and Analysis of Systems Used for Supervisory Control, Data Acquisition, and Automatic Control |
|
IEEE C37.10 |
Guide for Diagnostics and Failure Investigation of Power Circuit Breakers |
|
IEEE C37.10.1 |
Guide for the Selection of Monitoring for Circuit Breakers |
|
IEEE C37.100 |
Standard Definitions for Power Switchgear |
|
IEEE C37.101 |
Guide for Generator Ground Protection |
|
IEEE C37.102 |
Guide for AC Generator Protection |
|
IEEE C37.103 |
Guide for Differential and Polarizing Relay Circuit Testing |
|
IEEE C37.104 |
Guide for Automatic Reclosing of Line Circuit Breakers for AC Distribution and Transmission Lines |
|
IEEE C37.105 |
Standard for Qualifying Class 1E Protective Relays and Auxiliaries for Nuclear Power Generating Stations |
|
IEEE C37.106 |
IEEE Guide for Abnormal Frequency Protection for Power Generating Plants |
|
IEEE C37.108 |
Guide for the Protection of Network Transformers |
|
IEEE C37.109 |
Guide for the Protection of Shunt Reactors |
|
IEEE C37.11 |
Standard Requirements for Electrical Control for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis-Revision of ANSI C37.11- 1979 |
|
IEEE C37.110 |
Guide for the Application of Current Transformers Used for Protective Relaying Purposes |
|
IEEE C37.112 |
Standard Inverse-Time Characteristic Equations for Overcurrent Relays |
|
IEEE C37.113 |
Guide for Protective Relay Applications to Transmission Lines |
|
IEEE C37.114 |
Guide for Determining Fault Location on AC Transmission and Distribution Lines |
|
IEEE C37.115 |
Standard Test Method for Use in the Evaluation of Message Communications Between Intelligent Electronic Devices in an Integrated Substation Protection, Control, and Data Acquisition System |
|
IEEE C37.121 |
American National Standard for Switchgear Unit Substations Requirements-Replaces NEMA C37.121-1989 |
|
IEEE C37.122 |
Standard for Gas-Insulated Substations |
|
IEEE C37.123 |
Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment |
|
IEEE C37.13 |
Standard for Low-Voltage AC Power Circuit Breakers Used in Enclosures |
|
IEEE C37.14 |
Standard for Low-Voltage DC Power Circuit Breakers Used in Enclosures |
|
IEEE C37.16 |
Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors Preferred Ratings, Related Requirements, and Application Recommendations- Replaces NEMA C37.16-2000 |
|
IEEE C37.17 |
American National Standard for Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers-Replaces NEMA C37.17-1997 |
|
IEEE C37.18 |
Standard Enclosed Field Discharge Circuit Breakers for Rotating Electric Machinery |
|
IEEE C37.2 |
Standard Electrical Power System Device Function Numbers and Contact Designations |
|
IEEE C37.20.1 |
Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear-Amendment 1A:09/22/2005 |
|
IEEE C37.20.2 |
Standard for Metal-Clad Switchgear |
|
IEEE C37.20.3 |
Metal-Enclosed Interrupter Switchgear |
|
IEEE C37.20.4 |
Standard for Indoor AC Switches (1 kV - 38 kV) for Use in Metal- Enclosed Switchgear |
|
IEEE C37.20.6 |
Standard for 4.76 kV to 38 kV Rated Grounding and Testing Devices Used in Enclosures |
|
IEEE C37.20.7 |
Guide for Testing Medium-Voltage Metal-Enclosed Switchgear for Internal Arcing Faults |
|
IEEE C37.21 |
Standard for Control Switchboards |
|
IEEE C37.22 |
Preferred Ratings and Related Required Capabilities for Indoor AC Medium-Voltage Switches Used in Metal-Enclosed Switchgear-Replaces NEMA C37.22- 1997 |
|
IEEE C37.23 |
Standard for Metal-Enclosed Bus |
|
IEEE C37.24 |
IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear |
|
IEEE C37.27 |
Standard Application Guide for Low-Voltage AC Nonintegrally Fused Power Circuit Breakers (Using Separately Mounted Current-Limiting Fuses) |
|
IEEE C37.30 |
Standard Requirements for High-Voltage Switches |
|
IEEE C37.32 |
High-Voltage Switches, Bus Supports and Accessories Schedule of Preferred Ratings, Construction Guidelines and Specifications |
|
IEEE C37.34 |
Standard Test Code for High-Voltage Air Switches |
|
IEEE C37.35 |
Guide for the Application, Installation, Operation, and Maintenance of High-Voltage Air Disconnecting and Load Interrupter Switches |
|
IEEE C37.36B |
Guide to Current Interruption with Horn-Gap Air Switches |
|
IEEE C37.37 |
Loading Guide for AC High-Voltage Air Switches (In Excess of 1000 V) |
|
IEEE C37.40 |
IEEE Standard Service Conditions and Definitions for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
|
IEEE C37.41 |
Standard Design Test for High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
|
IEEE C37.42 |
Specification for High-Voltage Expulsion Type Distribution Class Fuses, Cutouts, Fuse Disconnecting Switches and Fuse Links-Replaces NEMA C37.42- 1996 |
|
IEEE C37.46 |
High Voltage Expulsion and Current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches |
|
IEEE C37.48 |
Guide for the Application, Operation, and Maintenance of High- Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories |
|
IEEE C37.48.1 |
Guide for the Operation, Classification, Application, and Coordination of Current-Limiting Fuses with Rated Voltages 1 38 kV |
|
IEEE C37.53.1 |
American National Standard High-Voltage Current-Limiting Motor- Starter Fuses Conference Test Procedures-Replaces NEMA C37.53.1-1989 |
|
IEEE C37.59 |
Standard Requirements for Conversion of Power Switchgear Equipment |
|
IEEE C37.60 |
Standard Requirements for Overhead, Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV-Corrigendum 1: 9/23/2004 |
|
IEEE C37.81 |
Guide for Seismic Qualification of Class 1E Metal-Enclosed Power Switchgear Assemblies |
|
IEEE C37.82 |
Standard for the Qualification of Switchgear Assemblies for Class 1E Applications in Nuclear Power Generating Stations |
|
IEEE C37.90 |
Standard for Relays and Relay Systems Associated with Electric Power Apparatus |
|
IEEE C37.90.1 |
Surge Withstand Capability (SWC) Tests for Relays and Relay Systems Associated with Electric Power Apparatus |
|
IEEE C37.90.2 |
Standard for Withstand Capability of Relay Systems to Radiated Electromagnetic Interference from Transceivers |
|
IEEE C37.90.3 |
Standard Electrostatic Discharge Tests for Protective Relays |
|
IEEE C37.91 |
Guide for Protective Relay Applications to Power Transformers |
|
IEEE C37.95 |
Guide for Protective Relaying of Utility - Consumer Interconnections |
|
IEEE C37.96 |
Guide for AC Motor Protection |
|
IEEE C37.98 |
Standard Seismic Testing of Relays |
|
IEEE C37.99 |
Guide for the Protection of Shunt Capacitor Banks |
|
IEEE C57.100 |
Standard Test Procedure for Thermal Evaluation of Liquid-Immersed Distribution and Power Transformers |
|
IEEE C57.105 |
Guide for Application of Transformer Connections in Three-Phase Distribution Systems |
|
IEEE C57.109 |
Guide for Liquid-Immersed Transformer Through-Fault-Current Duration |
|
IEEE C57.110 |
Recommended Practice for Establishing Transformer Capability When Supplying Nonsinusoidal Load Currents |
|
IEEE C57.111 |
Guide for Acceptance of Silicone Insulating Fluid and Its Maintenance in Transformers |
|
IEEE C57.113 |
Guide for Partial Discharge Measurement in Liquid-Filled Power Transformers and Shunt Reactors |
|
IEEE C57.116 |
Guide for Transformers Directly Connected to Generators |
|
IEEE C57.117 |
Guide for Reporting Failure Data for Power Transformers and Shunt Reactors on Electric Utility Power Systems |
|
IEEE C57.119 |
Recommended Practice for Performing Temperature Rise Tests on Oil-Immersed Power Transformers at Loads Beyond Nameplate Ratings |
|
IEEE C57.12.00 |
Standard General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
|
IEEE C57.12.01 |
Standard General Requirements for Dry-Type Distribution and Power Transformers Including Those with Solid-Cast and/or Resin-Encapsulated Windings |
|
IEEE C57.12.10 |
230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single- Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing Safety Requiremen |
|
IEEE C57.12.20 |
Standard for Overhead Type Distribution Transformers, 500 kVA and Smaller: High Voltage, 34500 Volts and Below; Low Voltage, 7970/13800Y Volts and Below |
|
IEEE C57.12.21 |
Requirements for Pad-Mounted, Compartmental-Type Self- Cooled, Single-Phase Distribution Transformers With High Voltage Bushings; High-Voltage, 34500 GRYD/19920 Volts and Below; Low-Voltage, 240/120 Volts; 167 kVA and Smaller- Replaces NEMA C57.12.21-1980 |
|
IEEE C57.12.22 |
Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled Three-Phase Distribution Transformers With High-Voltage Bushings, 2500 kVA and Smaller: High Voltage, 34 500 Grd Y/19 920 Volts and Below; Low Voltage, 480 Volts and Below- Replaces NEMA C57.12.22 |
|
IEEE C57.12.25 |
Transformers Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with Separable Insulated High-Voltage Connectors; High Voltage, 34 500 GrdY/19 920 Volts and Below; Low Voltage, 240/120 Volts; 167 kVA and Smaller Require |
|
IEEE C57.12.28 |
Standard for Pad-Mounted EquipmentEnclosure Integrity |
|
IEEE C57.12.44 |
Standard Requirements for Secondary Network Protectors |
|
IEEE C57.12.50 |
Requirements for Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 120 to 600 Volts-Replaces NEMA C57.12.50-1981 |
|
IEEE C57.12.51 |
Requirements for Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts-Replaces NEMA C57.12.51-1981 |
|
IEEE C57.12.55 |
Transformers Used in Unit Installations, Including Unit SubstationsConformance Standard-Replaces NEMA C57.12.55-1987 |
|
IEEE C57.12.56 |
Standard Test Procedure for Thermal Evaluation of Insulation Systems for Ventilated Dry-Type Power and Distribution Transformers |
|
IEEE C57.12.59 |
Guide for Dry-Type Transformer Through-Fault Current Duration |
|
IEEE C57.12.60 |
Guide for Test Procedures for Thermal Evaluation of Insulation Systems for Solid-Cast and Resin-Encapsulated Power and Distribution Transformers |
|
IEEE C57.12.70 |
Standard Terminal Markings and Connections for Distribution and Power Transformers |
|
IEEE C57.12.80 |
Standard Terminology for Power and Distribution Transformers |
|
IEEE C57.12.90 |
Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
|
IEEE C57.12.91 |
Standard Test Code for Dry-Type Distribution and Power Transformers |
|
IEEE C57.120 |
Loss Evaluation Guide for Power Transformers and Reactors |
|
IEEE C57.125 |
Guide for Failure Investigation, Documentation, and Analysis for Power Transformers and Shunt Reactors |
|
IEEE C57.13 |
Standard Requirements for Instrument Transformers |
|
IEEE C57.13.1 |
Guide for Field Testing of Relaying Current Transformers |
|
IEEE C57.13.2 |
Standard Conformance Test Procedures for Instrument Transformers |
|
IEEE C57.13.3 |
Guide for the Grounding of Instrument Transformer Secondary Circuits and Cases |
|
IEEE C57.13.5 |
Trial-Use Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above |
|
IEEE C57.131 |
Standard Requirements for Load Tap Changers |
|
IEEE C57.15 |
Standard Requirements, Terminology, and Test Code for Step- Voltage Regulators |
|
IEEE C57.16 |
Standard Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors-Revision of ANSI C57.16-1958 |
|
IEEE C57.18.10 |
Standard Practices and Requirements for Semiconductor Power Rectifier Transformers-Replaces ANSI/IEEE C57.18 |
|
IEEE C57.19.00 |
General Requirements and Test Procedure for Outdoor Power Apparatus Bushings |
|
IEEE C57.19.01 |
Performance Characteristics and Dimensions for Outdoor Apparatus Bushings |
|
IEEE C57.19.100 |
Guide for Application of Power Apparatus Bushings |
|
IEEE C57.21 |
Standard Requirements, Terminology, and Test Code for Shunt Reactors Rated Over 500 kVA |
|
IEEE C57.91 |
Guide for Loading Mineral-Oil-Immersed Transformers-Revision of IEEE Std C57.92-1981, and IEEE Std C57.115-1991; Errata: 01/29/01; Corrigendum 1: 2002 |
|
IEEE C57.93 |
Guide for Installation of Liquid-Immersed Power Transformers- Revision of ASA C57.93-1958 |
|
IEEE C57.94 |
Recommended Practice for Installation, Application, Operation, and Maintenance of Dry-Type General Purpose Distribution and Power Transformers-Revision of ANSI C57.94-1956 |
|
IEEE C57.96 |
Guide for Loading Dry-Type Distribution and Power Transformers |
|
IEEE C57.98 |
Guide for Transformer Impulse Tests-Corrections January 16, 1998 |
|
IEEE C62.11 |
Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1kV) |
|
IEEE C62.21 |
Guide for the Application of Surge Voltage Protective Equipment on AC Rotating Machinery 1000 V and Greater |
|
IEEE C62.22 |
Guide for the Application of Metal-Oxide Surge Arresters for Alternating-Current Systems |
|
IEEE C62.22.1 |
Guide for the Connection of Surge Arresters to Protect Insulated, Shielded Electric Power Cable Systems-IEEE 1299 |
|
IEEE C62.23 |
Application Guide for Surge Protection of Electric Generating Plants |
|
IEEE C62.41 |
IEEE Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits |
|
IEEE C62.41.1 |
IEEE Guide on the Surges Environment in Low-Voltage (1000 V and Less) AC Power Circuits-:1991 |
|
IEEE C62.41.2 |
IEEE Recommended Practice on Characterization of Surges in Low-Voltage (1000 V and Less) AC Power Circuits-:1991 |
|
IEEE C62.43 |
Guide for the Application of Surge Protectors Used in Low-Voltage (Equal to or Less Than 1000 V,rms or 1200 V,dc) Data, Communications, and Signaling Circuits |
|
IEEE C62.45 |
IEEE Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits |
|
IEEE C62.92.1 |
Guide for the Application of Neutral Grounding in Electrical Utility Systems - Part I: Introduction |
|
IEEE C62.92.2 |
Guide for the Application of Neutral Grounding in Electrical Utility Systems Part IIGrounding of Synchronous Generator Systems |
|
IEEE C62.92.3 |
Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part III - Generator Auxiliary Systems |
|
IEEE C62.92.4 |
Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part IV - Distribution |
|
IEEE C62.92.5 |
Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part V - Transmission Systems and Subtransmission Systems |
|
IEEE C95.6 |
IEEE standard for Safety Levels with Respect to Human Exposure to Electromagnetic Fields, 0-3 kHz-IEEE Standards Coordinating Committee 28 |