|
ANSI C119.4 |
Electric Connectors Connectors for Use Between Aluminum-to- Aluminum or Aluminum-to-Copper Conductors |
|
ANSI C37.16 |
Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors - Preferred Ratings, Related Requirements, and Application Recommendations-This is Now Copyright by IEEE |
|
ANSI C37.17 |
Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers-This is Now Copyrighted by IEEE |
|
ANSI C50.41 |
Polyphase Induction Motors for Power Generating Stations |
|
ANSI C57.12.22 |
Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers with High-Voltage Bushings, 2500 kVA and Smaller High Voltage, 34 500 Grd Y/19 920 Volts and Below Low Voltage, 480 Volts and Below- Reprinted in June 1998; |
|
NEMA 250 |
Enclosures for Electrical Equipment (1000 Volts Maximum) |
|
NEMA 260 |
Safety Labels for Pad-Mounted Switchgear and Transformers Sited in Public Areas |
|
NEMA 280 |
Application Guide for Ground Fault Circuit Interrupters |
|
NEMA 410 |
Performance Testing for Lighting Controls and Switching Devices with Electronic Fluorescent Ballasts |
|
NEMA AB 3 |
Molded Case Circuit Breakers and Their Application |
|
NEMA AB 4 |
Guidelines for Inspection and Preventive Maintenance of Molded Case Circuit Breakers Used in Commercial and Industrial Applications |
|
NEMA APPLICATION GUIDE |
Application Guide for Isolated Ground Wiring Devices |
|
NEMA BENCHMARKING STUDY |
Environmental, Health, and Safety Policies and Practices Benchmarking Study - An Overview of the Newly Published Environmental, Health, and Safety Benchmarking Study |
|
NEMA BU 1.1 |
General Instructions for Handling, Installation, Operation, and Maintenance of Busway Rated 600 Volts or Less |
|
NEMA BU 1.2 |
Application Information for Busway Rated 600 Volts or Less |
|
NEMA BULLETIN 5RN 2189 |
USER GUIDE TO PRODUCT SPECIFICATIONS FOR METAL ELECTRICAL CONDUIT AND TUBING |
|
NEMA C119.1 |
Electric Connectors Sealed Insulated Underground Connector Systems Rated 600 Volts |
|
NEMA C119.4 |
Electric Connectors Connectors for Use Between Aluminum-to- Aluminum or Aluminum-to-Copper Conductors |
|
NEMA C12.1 |
Electric Meters; Code for Electricity Metering |
|
NEMA C12.10 |
Physical Aspects of Watthour Meters - Safety Standard |
|
NEMA C12.18 |
Protocol Specification for ANSI Type 2 Optical Port |
|
NEMA C12.19 |
Utility Industry End Device Data Tables-Errata:1997 |
|
NEMA C12.20 |
Electricity Meters 0.2 and 0.5 Accuracy Classes |
|
NEMA C12.21 |
Protocol Specification for Telephone Modem Communication |
|
NEMA C12.4 |
Registers - Mechanical Demand-Replaced IEEE C12.4 |
|
NEMA C12.6 |
Phase-Shifting Devices Used in Metering, Marking and Arrangement of Terminals-Replaces IEEE C12.6 |
|
NEMA C12.7 |
Requirements for Watthour Meter Sockets |
|
NEMA C12.8 |
Test Blocks and Cabinets for Installation of Self-Contained A-Base Watthour Meters |
|
NEMA C12.9 |
Test Switches for Transformer-Rated Meters |
|
NEMA C136.13 |
For Roadway and Area Lighting Equipment Metal Brackets for Wood Poles-Replaces IEEE C136.13 |
|
NEMA C136.14 |
For Roadway and Area Lighting Equipment Elliptically Shaped, Enclosed Side-mounted Luminaires For Horizontal-burning High-intensity Discharge Lamps |
|
NEMA C136.19 |
For Roadway and Area Lighting Equipment High-pressure Sodium and Retrofit High-pressure Sodium Lamps for Mercury Ballasts Guide for Selection-Replaces IEEE C136.19 |
|
NEMA C136.2 |
For Roadway and Area Lighting Equipment Luminaire Voltage Classification |
|
NEMA C136.21 |
For Roadway and Area Lighting Equipment - Verticle Tenons Used with Post Top-mounted Luminaires |
|
NEMA C136.3 |
For Roadway and Area Lighting Equipment Luminaire Attachments |
|
NEMA C136.33 |
For Roadway and Area Lighting Equipment Plug-in Type Receptacle and Plug For High-intensity Discharge Ignitors |
|
NEMA C18.1M PART 1 |
Portable Primary Cells and Batteries with Aqueous Electrolyte - General and Specifications |
|
NEMA C18.1M PART 2 |
American National Standard for Portable Primary Cells and Batteries with Aqueous ElectrolyteSafety Standard |
|
NEMA C18.2M PART 1 |
For Portable Rechargeable Cells and BatteriesGeneral and Specifications |
|
NEMA C18.2M PART 2 |
Portable Rechargeable Cells and Batteries - Safety Standard |
|
NEMA C18.3M PART 1 |
For Portable Lithium Primary Cells and Batteries General and Specifications |
|
NEMA C18.3M PART 2 |
Portable Lithium Primary Cells and BatteriesSafety Standard |
|
NEMA C29.1 |
Test Methods for Electrical Power Insulators |
|
NEMA C29.10 |
Wet Process Porcelain Insulators (Indoor Apparatus Type) |
|
NEMA C29.11 |
Composite Suspension Insulators for Overhead Transmission Lines - Tests-Replaces ANSI C29.11 |
|
NEMA C29.12 |
Insulators Composites - Suspension Type |
|
NEMA C29.13 |
Insulators - Composite - Distribution Deadend Type |
|
NEMA C29.17 |
For Insulators - Composite Line Post Type |
|
NEMA C29.18 |
for Insulators Composite Distribution Line Post Type |
|
NEMA C29.2 |
Insulators - Wet-Process Porcelain and Toughened Glass - Suspension Type-Supersedes ANSI C29.2:1992 |
|
NEMA C29.3 |
Wet Process Porcelain Insulators (Spool Type) |
|
NEMA C29.4 |
Wet Process Porcelain Insulators (Strain Type) |
|
NEMA C29.5 |
Wet-Process Porcelain Insulators (Low and Medium Voltage Pin Type) |
|
NEMA C29.6 |
Wet Process Porcelain Insulators (High Voltage Pin Type) |
|
NEMA C29.7 |
Wet Process Porcelain Insulators (High Voltage Line Post Type) |
|
NEMA C29.8 |
Wet Process Porcelain Insulators (Apparatus, Cap and Pin Type) |
|
NEMA C29.9 |
Wet-Process Porcelain Insulators - Apparatus, Post-Type-ANSI C29.9-1983 |
|
NEMA C37.06 |
AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis - Preferred Ratings and Related Required Capabilities-This is Now Copyrighted by IEEE |
|
NEMA C37.16 |
Low-Voltage Power Circuit Breakers and AC Power Circuit Protectors - Preferred Ratings, Related Requirements, and Application Recommendations-This is Now Copyright by IEEE |
|
NEMA C37.17 |
Trip Devices for AC and General Purpose DC Low Voltage Power Circuit Breakers-This is Now Copyrighted by IEEE |
|
NEMA C37.32 |
High-Voltage Switches, Bus Supports and Accessories Schedule of Preferred Ratings, Construction Guidelines and Specifications-Revision of ANSI C37.32; This is Now Copyrighted by IEEE |
|
NEMA C37.44 |
Distribution Oil Cutouts and Fuse Links, Specs. for |
|
NEMA C37.46 |
Specifications for High Voltage Expulsion and current-Limiting Type Power Class Fuses and Fuse Disconnecting Switches-This is Now Copyrighted by IEEE |
|
NEMA C37.47 |
High Voltage Current-Limiting Type Distribution Class Fuses and Fuse Disconnecting Switches-This is Now Copyrighted by IEEE |
|
NEMA C37.50 |
Switchgear Low Voltage AC Power Circuit Breakers Used in Enclosures - Test Procedures-Supersedes ANSI C37.50:1989 |
|
NEMA C37.51 |
For Switchgear - Metal-Enclosed Low-Voltage AC Power Circuit Breaker Switchgear Assemblies - Conformance Test Procedure |
|
NEMA C37.52 |
Test Procedures for Low Voltage AC Power Circuit Protectors Used in Enclosures-Supersedes ANSI C37.52:1974 |
|
NEMA C37.54 |
For Indoor Alternating Current High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear - Conformance Test Procedures |
|
NEMA C37.55 |
Switchgear - Medium Voltage Metal-Clad Assemblies - Conformance Test Procedure |
|
NEMA C37.57 |
Switchgear - Metal-Enclosed Interrupter Swithgear Assemblies - Conformance Testing |
|
NEMA C37.58 |
for Switchgear Indoor AC Medium-Voltage Switches for Use in Metal-Enclosed Switchgear Conformance Test Procedures |
|
NEMA C37.85 |
Switchgear - Alternating-Current High-Voltage Power Vacuum Interrupters - Safety Requirements for X-Radiation Limits |
|
NEMA C50.41 |
Polyphase Induction Motors for Power Generating Stations |
|
NEMA C57.12.10 |
Transformers - 230 kV and Below 833 / 958 through 8333 / 10 417 kVA, Single-Phase, and 750 / 862 through 60 000 / 80 000 / 100 000 kVA, Three-Phase Without Load Tap Changing; and 3750 / 4687 through 60 000 / 80 000 / 100 000 kVA with Load Tap Changing - S |
|
NEMA C57.12.21 |
Pad-Mounted, Compartmental-Type, Self-Cooled, Single-Phase Distribution Transformers with High-Voltage Bushings; High -Voltage, 34 500 GrdY/19 920 Volts and Below; Low-Voltage, 240/120 Volts; 167 KVA and Smaller, Requirements for-This is Now Copyrighted b |
|
NEMA C57.12.22 |
Transformers - Pad-Mounted, Compartmental-Type, Self-Cooled, Three-Phase Distribution Transformers with High-Voltage Bushings, 2500 kVA and Smaller High Voltage, 34 500 Grd Y/19 920 Volts and Below Low Voltage, 480 Volts and Below- Reprinted in June 1998; |
|
NEMA C57.12.25 |
Pad-Mounted, Compartmental Type, Self-Cooled, Single Phase Distribution Transformers with Separable Insulated High Voltage Connectors, High Voltage 34500 Grd Y/19920 Volts and Below; Low Voltage, 240/120; 167 kVA and Smaller, Requirements for-This is Now |
|
NEMA C57.12.50 |
Ventilated Dry-Type Distribution Transformers, 1 to 500 kVA, Single-Phase, and 15 to 500 kVA, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low- Voltage 120 to 600 Volts, Requirements for-Correction June 1982; This is Now Copyrighted by IEEE |
|
NEMA C57.12.51 |
Ventilated Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for-This is Now Copyrighted by IEEE |
|
NEMA C57.12.52 |
Sealed Dry-Type Power Transformers, 501 kVA and Larger, Three-Phase, with High-Voltage 601 to 34 500 Volts, Low-Voltage 208Y/120 to 4160 Volts, Requirements for |
|
NEMA C57.12.55 |
Dry Type Transformers in Unit Installations, Including Unit Substations - Conformance Standard-This is Now Copyrighted by IEEE |
|
NEMA C57.12.70 |
Terminal Markings and Connections for Distribution and Power Transformers |
|
NEMA C62.61 |
Gas Tube Surge Arresters on Wire Line Telephone Circuits-Revision of ANSI C62.61-1985 |
|
NEMA C78.1402 |
For Electric Lamps - Dimensions for Projection Lamps - G17q and GX17q Based Four-pin, Prefocus, for Base-down Operation |
|
NEMA C78.1407 |
For Electric Lamps - Electric Lamps Condenser-Reflector, Four- Pin Prefocus-Base Projection Lamps - Dimensions |
|
NEMA C78.1408 |
For Electric Lamps - Electric Lamps CBA Projection Lamp |
|
NEMA C78.1452 |
Electric Lamps - Projection Lamps - Vocabulary |
|
NEMA C78.1460 |
For Electric Lamps Single-Ended Tungsten-Halogen Lamps GZ9.5 Base, T6 Bulb, 86.5mm LCL, 76.2mm MOL with Proximity Reflector |
|
NEMA C78.23 |
Incandescent Lamps - Miscellaneous Types-Revision of ANSI C78.23-1989 |
|
NEMA C78.375 |
Electric Lamps - Fluorescent Lamps - Guide for Electrical Measurements-Revision of ANSI C78.375-1991; First Edition |
|
NEMA C78.380 |
Electric Lamps - High Intensity Discharge Lamps, Method of Designation |
|
NEMA C78.390 |
Method of Designation for Electric Lamps - Miniature and Sealed Beam Incandescent Lamps-First Edition:April 1999; Revision of ANSI C78.390-1992; Supplement CD: 2002 |
|
NEMA C78.391 |
For Electric Lamps Characteristics of Subminiature Lamps of T1 and T1-3/4 Shapes |
|
NEMA C78.40 |
Specifications for Mercury Lamps-Supplement C78.40a- 1998 |
|
NEMA C78.42 |
Electric Lamps - High-Pressure Sodium Lamps |
|
NEMA C78.5 |
Electric Lamps - Specifications for Performance of Self-Ballasted Compact Fluorescent Lamps |
|
NEMA C78.60432- 3 |
For Electric Lamps - Incandescent Lamps - Safety Specifications - Part 3: Tungsten Halogen Lamps (Non-Vehicle) |
|
NEMA C78.62035 |
For Electric Lamps - Discharge Lamps (Excluding Fluorescent Lamps) - Safety Specification |
|
NEMA C78.81 |
Electric Lamps - Double-Capped Fluorescent Lamps - Dimensional and Electrical Characteristics |
|
NEMA C78.901 |
Electric Lamps - Single Base Fluorescent Lamps - Dimensional and Electrical Characteristics |
|
NEMA C79.1 |
For Electric Lamps - Nomenclature for Glass Bulbs Intended for Use with Electric Lamps |
|
NEMA C80.1 |
Electrical Rigid Steel Conduit (ERSC) |
|
NEMA C80.3 |
Steel Electrical Metallic Tubing (EMT) |
|
NEMA C80.5 |
Electrical Rigid Aluminum Conduit (ERAC) |
|
NEMA C80.6 |
Electrical Intermediate Metal Conduit (EIMC) |
|
NEMA C81.61 |
Electrical Lamp Bases Specifications for Bases (Caps) for Electric Lamps |
|
NEMA C81.62 |
Electric Lampholders |
|
NEMA C81.63 |
Gauges for Electric Lamp Bases and Lampholders |
|
NEMA C81.64 |
Guidelines and General Information for Electric Lamp Bases, Lampholders and Gauges |
|
NEMA C82.1 |
For Lamp Ballast - Line Frequency Fluorescent Lamp Ballast |
|
NEMA C82.11 |
Lamp Ballasts High Frequency Fluorescent Lamp Ballasts |
|
NEMA C82.2 |
For Lamp Ballasts - Method of Measurement of Fluorescent Lamp Ballasts |
|
NEMA C82.3 |
Reference Ballasts for Fluorescent Lamps |
|
NEMA C82.4 |
For Lamp Ballasts - Ballasts for High-Intensity-Discharge and Low- Pressure Sodium Lamps (Multiple-Supply Type) |
|
NEMA C82.6 |
for lamp ballasts - Ballasts for High-Intensity Discharge Lamps Methods of Measurement |
|
NEMA C82.77 |
Harmonic Emission Limits - Related Power Quality Requirements for Lighting Equipment |
|
NEMA C84.1 |
Electric Power Systems and Equipment - Voltage Ratings (60 Hertz) |
|
NEMA C93.1 |
Requirements for Power-Line Carrier Coupling Capacitors and Coupling Capacitor Voltage Transformers (CCVT)-Supersedes ANSI C93.1:1990 |
|
NEMA CB 1 |
Brushes for Electrical Machines |
|
NEMA CC 1 |
Electric Power Connection for Substations |
|
NEMA CC 4 |
8.3 kV and 8.3/14.4 kV Probe for Separable Insulated Loadbreak Connectors |
|
NEMA CG 2 |
Powdered Graphite |
|
NEMA CODE OF ETHICS |
Code of Ethics - On Interactions with Health Care Providers- Published in 2005 |
|
NEMA CONFORMITY ASSESS |
Conformity Assessment Guide-Second Edition |
|
NEMA CP 1 |
Shunt Capacitors |
|
NEMA DC 10 |
Residential Controls Temperature Limit Controls for Electrical Baseboard Heaters |
|
NEMA DC 3 |
Residential Controls Electrical Wall-Mounted Room Thermostats |
|
NEMA EI 21.1 |
Instrument Transformers for Revenue Metering (110 kV BIL and Less) |
|
NEMA EI 21.2 |
Instrument Transformers for Revenue Metering (125 kV BIL Through 350 kV BIL) |
|
NEMA EM 1 |
Exit Sign Visibility Testing and Requirements for Safety |
|
NEMA EW 1 |
Electric Arc Welding Power Sources-Revision 1: 3/26/1992 |
|
NEMA EW 4 |
Graphic Symbols for Arc Welding and Cutting Apparatus |
|
NEMA EW 6 |
Guidelines for Precautionary Labeling for Arc-Welding and Cutting Products |
|
NEMA FB 1 |
Fittings, Cast Metal Boxes, and Conduit Bodies for Conduit, Electrical Metallic Tubing, and Cable |
|
NEMA FB 11 |
Plugs, Receptacles, and Connectors of the Pin and Sleeve Type for Hazardous Locations |
|
NEMA FB 2.10 |
Selection and Installation Guidelines for Fittings for Use with Non- Flexible Metallic Conduit or Tubing (Rigid Metal Conduit, Intermediate Metal Conduit, and Electrical Metallic Tubing) |
|
NEMA FB 2.20 |
Selection and Installation Guidelines for Fittings for Use with Flexible Electrical Conduit and Cable |
|
NEMA FG 1 |
Fiberglass Cable Tray Systems-Revision No.1 - November 1994 |
|
NEMA FI 1 |
Manufactured Electrical Mica |
|
NEMA FI 2 |
Untreated Mica Paper Used for Electrical Insulation-Errata: 12/2/2004 |
|
NEMA FI 3 |
Calendered Aramid Papers Used For Electical Insulation |
|
NEMA FU 1 |
Low Voltage Cartridge Fuses |
|
NEMA GR 1 |
GROUNDING ROD ELECTRODES AND GROUNDING ROD ELECTRODE COUPLINGS |
|
NEMA GUIDE - DUCT |
Guide for Proper Use of Smoke Detectors in Duct Applications |
|
NEMA GUIDE - SYSTEM |
Guide for Proper Use of System Smoke Detectors |
|
NEMA GUIDE TO CODE |
Guide to Code Requirements for Fire Alarm and Detection Systems |
|
NEMA HP 100 |
High Temperature Instrumentation and Control Cables |
|
NEMA HP 100.1 |
High Temperature Instrumentation and Control Cables Insulated and Jacketed with FEP Fluorocarbons |
|
NEMA HP 100.2 |
High Temperature Instrumentation and Control Cables Insulated and Jacketed with ETFE Fluoropolymers |
|
NEMA HP 100.3 |
High Temperature Instrumentation and Control Cables Insulated and Jacketed with Cross-Linked (Thermoset) Polyolefin (XLPO) |
|
NEMA HP 100.4 |
High Temperature Instrumentation and Control Cables Insulated and Jacketed with ECTFE Fluoropolymers |
|
NEMA HP 3 |
Electrical and Electronic PTFE (Polytetrafluoroethylene) Insulated High Temperature Hook-Up Wire; Types ET (250 Volts), E (600 Volts), and EE (1000 Volts)-Errata: 10/04/2002 |
|
NEMA HP 4 |
Electrical and Electronic FEP (Fluorinated Ethylene Propylene) Insulated High Temperature Hook-Up Wire, Types KT (250 Volt), K (600 Volt), and KK (1000 Volt) |
|
NEMA HV 2 |
Application Guide for Ceramic Suspension Insulators |
|
NEMA IA 2.1 |
Programmable Controllers - Part 1: General Information |
|
NEMA IA 2.2 |
PROGRAMMABLE CONTROLLERS PART 2: EQUIPMENT REQUIREMENTS AND TESTS |
|
NEMA IA 2.3 |
PROGRAMMABLE CONTROLLERS PART 3: PROGRAMMING LANGUAGES |
|
NEMA IA 2.4 |
PROGRAMMABLE CONTROLLERS PART 4: USER GUIDELINE |
|
NEMA IA 2.5 |
PROGRAMMABLE CONTROLLERS PART 5: COMMUNICATIONS |
|
NEMA IA 2.7 |
PROGRAMMABLE CONTROLLERS PART 7: FUZZY CONTROL PROGRAMMING |
|
NEMA IA 2.8 |
PROGRAMMABLE CONTROLLERS PART 8: GUIDELINES FOR THE APPLICATION AND IMPLEMENTATION OF PROGRAMMING LANGUAGES |
|
NEMA ICS 1 |
Industrial Control and Sysstems General Requirements-Reaffirm Letter |
|
NEMA ICS 1.1 |
Safety Guidelines for the Application, Installation, and Maintenance of Solid State Control |
|
NEMA ICS 1.3 |
Preventive Maintenance of Industrial Control and Systems Equipment |
|
NEMA ICS 10 P1 |
Industrial Control and Systems Part 1: Electromechanical AC Transfer Switch Equipment |
|
NEMA ICS 10 P2 |
Industrial Control and Systems PART 2: STATIC AC TRANSFER EQUIPMENT |
|
NEMA ICS 12.1 |
Profiles of Networked Industrial Devices - Part 1: General Rules |
|
NEMA ICS 14 |
Application Guide for Electric Fire Pump Controllers |
|
NEMA ICS 15 |
Instructions for the Handling, Installation, Operation and Maintenance of Electric Fire Pump Controllers Rated Not More Than 600V |
|
NEMA ICS 16 |
Industrial Control and Systems Motion/Position Control Motors, Controls, and Feedback Devices-Revised and Republished from MG 7-1993; Errata: 6/13/2002 |
|
NEMA ICS 18 |
Motor Control Centers-Errata: 10/25/2004 |
|
NEMA ICS 19 |
Industrial Control and System: Diagrams, Device Designations, and Symbols |
|
NEMA ICS 2 |
Starters, Contactors & Overload Relays, Rated Not More Than 2000 Volts AC or 750 Volts DC-Addendum/Errata: 05/23/2002; Reaffirm Letter |
|
NEMA ICS 2 PART 8 |
Industrial Control and Systems: Controllers, Contactors, and Overload Relays, Rated Not More Than 2000 Volts AC or 750 Volts DC Part 8: Disconnect Devices for Use in Industrial Control Equipment |
|
NEMA ICS 2 PART 9 |
Industrial Automation Control Products and Systems: Starters, Contactors, and Overload Relays Rated Not More Than 2000 Volts AC or 750 Volts DC - Part 9 - AC Vacumm-Break Magnetic Controllers Rated 1500 Volts AC |
|
NEMA ICS 2.3 |
Instructions for the Handling, Installation, Operation, and Maintenance of Motor Control Centers Rated Not More Than 600 Volts |
|
NEMA ICS 2.4 |
NEMA and IEC Devices for Motor Service - A Guide for Understanding the Differences |
|
NEMA ICS 3 |
Industrial Control and Systems: Medium Voltage Controllers Rated 2001 to 7200 Volts AC |
|
NEMA ICS 3.1 |
Handling, Storage, and Installation Guide for AC General-Purpose Medium Voltage Contactors and Class E Controllers, 50 and 60 Hertz |
|
NEMA ICS 4 |
Terminal Blocks |
|
NEMA ICS 5 |
Industrial Control and Systems Control-Circuit and Pilot Devices |
|
NEMA ICS 5, ANNEX B |
Industrial Control and Systems: Typical Proximity Switch Specifications- Annex B-2002 |
|
NEMA ICS 5, ANNEX E |
Industrial Control and Systems: Additional Requirements for Proximity Switches Suitable for Use in Strong Magnetic Fields-Annex E-2002 |
|
NEMA ICS 5, ANNEX F |
Industrial Control and Systems: High Pressure Power Wash Test Procedure for Self-Contained Control-Circuit Devices-Annex F-2002 |
|
NEMA ICS 6 |
Industrial Control and Systems Enclosures |
|
NEMA ICS 61800- 1 |
Adjustable Speed Electrical Power Drive Systems Part 1: General Requirements - Rating Specifications for Low Voltage Adjustable Speed d.c. Power Drive Systems |
|
NEMA ICS 61800- 2 |
Adjustable Speed Electrical Power Drive Systems Part 2: General requirementsRating specifications for low voltage adjustable frequency a.c. power drive systems |
|
NEMA ICS 61800- 4 |
Adjustable Speed Electrical Power Drive Systems Part 4: General RequirementsRating Specifications for a.c. Power Drive Systems above 1000 V a.c. and Not Exceeding 35 kV |
|
NEMA ICS 7 |
Industrial Control and Systems: Adjustable-Speed Drives |
|
NEMA ICS 7.1 |
Safety Standards for Construction and Guide for Selection, Installation, and Operation of Adjustable-Speed Drive Systems |
|
NEMA ICS 8 |
Industrial Control and Systems Crane and Hoist Controllers-Reaffirm Letter |
|
NEMA IEC 60529 |
Degrees of Protection Provided by Enclosures (IP Code)-Identical National Adoption |
|
NEMA INSTALLATION GUIDE |
Nurse Call Systems |
|
NEMA KS 1 |
Enclosed and Miscellaneous Distribution Equipment Switches (600 Volts Maximum) |
|
NEMA LA 1 |
Surge Arresters |
|
NEMA LD 3 |
High-Pressure Decorative Laminates |
|
NEMA LD 3.1 |
Application, Fabrication, and Installation of High-Pressure Decorative Laminates |
|
NEMA LE 4 |
Recessed Luminaires, Ceiling Compatibility |
|
NEMA LI 1 |
Industrial Laminating Thermosetting Products |
|
NEMA LI 6 |
Relative Temperature Indices of Industrial Thermosetting Laminates- Reaffirm Letter |
|
NEMA LL 1 |
Procedure For Linear Fluorescent Lamp Sample Preparation and the TCLP Extraction |
|
NEMA LS 1 |
Low Voltage Surge Protective Devices |
|
NEMA MG 1 |
Motors and Generators-Revision 1: 2004 |
|
NEMA MG 10 |
Energy Management Guide for Selection and Use of Fixed Frequency Medium AC Squirrel - Cage Polyphase Induction Motors |
|
NEMA MG 11 |
Energy Management Guide for Selection and Use of Single-Phase Motors |
|
NEMA MG 2 |
Safety Standard and Guide for Selection, Installation, and Use of Electric Motors and Generators |
|
NEMA MG 3 |
Sound Level Prediction for Installed Rotating Electrical Machines |
|
NEMA MS 1 |
Determination of Signal-to-Noise (SNR) in Diagnostic Magnetic Resonance Imaging |
|
NEMA MS 2 |
Determination of Two-Dimensional Geometric Distortion in Diagnostic Magnetic Resonance Images |
|
NEMA MS 3 |
Determination of Image Uniformity in Diagnostic Magnetic Resonance Images |
|
NEMA MS 5 |
Determination of Slice Thickness in Diagnostic Magnetic Resonance Imaging |
|
NEMA MS 6 |
Characterization of Special Purpose Coils for Diagnostic Magnetic Resonance Images |
|
NEMA MS 8 |
Characterization of the Specific Absorption Rate for Magnetic Resonance Imaging Systems |
|
NEMA MS 9 |
Characterization of Phased Array Coils for Diagnostic Magnetic Resonance Images |
|
NEMA MW 1000 |
Magnet Wire-Revision 1: 2005 |
|
NEMA MW 770 |
Unified Customer Labeling for Magnet Wire Products |
|
NEMA NEMA USER GUIDE |
USER GUIDE TO PRODUCT SPECIFICATIONS FOR ELECTRICAL BUILDING WIRE AND CABLE |
|
NEMA NEMA/ISO 15704 |
Industrial Automation Systems - Requirements for Enterprise- Reference Architectures and Methodologies |
|
NEMA NEMA/ISO 9506- 1 |
Industrial Automation Systems - Manufacturing Message Specification - Part 1: Service Definition |
|
NEMA NEMA/ISO 9506- 2 |
Industrial Automation Systems - Manufacturing Message Specification - Part 2: Protocol Definition |
|
NEMA NEMA/ISO TR 11065 |
Industrial Automation Glossary |
|
NEMA NS 1 |
Guide for Preparation of NEMA Standards Publications |
|
NEMA NTCIP 2101 |
National Transportation Communications for ITS Protocol - Point to Multi-Point Protocol Using RS-232 Subnetwork Profile-v01.19 |
|
NEMA OS 1 |
Sheet-Steel Outlet Boxes, Device Boxes, Covers, and Box Supports |
|
NEMA OS 2 |
Nonmetallic Outlet Boxes, Device Boxes, Covers and Box Supports |
|
NEMA OS 3 |
Selection and Installation Guidelines for Electrical Outlet Boxes |
|
NEMA PB 1 |
Panelboards |
|
NEMA PB 1.1 |
General Instructions for Proper Installation, Operation, and Maintenance of Panelboards Rated 600 Volts or Less |
|
NEMA PB 2 |
Deadfront Distribution Switchboards |
|
NEMA PB 2.1 |
General Instructions for Proper Handling, Installation, Operation, and Maintenance of Deadfront Distribution Switchboards Rated 600 Volts or Less |
|
NEMA PB 2.2 |
Application Guide for Ground Fault Protective Devices for Equipment |
|
NEMA PE 1 |
Uninterruptible Power Systems (UPS) - Specification and Performance Verification |
|
NEMA PE 5 |
Utility Type Battery Chargers |
|
NEMA PE 7 |
Communication Type Battery Chargers |
|
NEMA PREMIUM |
General Specification for Consultants, Industrial and Municipal: NEMA Premium Efficency Electric Motors (600 Volts or Less) |
|
NEMA PS 3.14 |
Digital Imaging and Communications in Medicine (DICOM) Part 14: Grayscale Standard Display Function-Now Copyrighted by DICOM |
|
NEMA RE 2 |
Electrical Insulating Varnish |
|
NEMA RN 1 |
POLYVINYL-CHLORIDE (PVC) EXTERNALLY COATED GALVANIZED RIGID STEEL CONDUIT AND INTERMEDIATE METAL CONDUIT |
|
NEMA RN 2 |
Packaging of Master Bundles for Steel Rigid Conduit Intermediate Metal Conduit (IMC), and Electrical Metallic Tubing |
|
NEMA RV 1 |
Application and Installation Guidelines for Armored Cable and Metal-Clad Cable-Revision 1-2005 |
|
NEMA RV 2 |
Application and Installation Guidelines for Nonmetallic-Sheathed Cable and Underground Feeder and Branch Circuit Cable |
|
NEMA SB 28 |
Product Safety Guide for Developing Documentation for Fire Alarm Systems and Equipment |
|
NEMA SB 30 |
Fire Service Annunciator and Interface |
|
NEMA SG 4 |
Alternating-Current High-Voltage Circuit Breakers |
|
NEMA SG 6 |
Power Switching Equipment |
|
NEMA SM 23 |
Steam Turbines for Mechanical Drive Service |
|
NEMA SM 24 |
Land Based Steam Turbine Generator Sets 0 to 33,000 kW |
|
NEMA ST 1 |
Specialty Transformers (Except General-Purpose Type) |
|
NEMA ST 20 |
Dry-Type Transformers for General Applications |
|
NEMA TC 13 |
Electrical Nonmetallic Tubing (ENT) |
|
NEMA TC 14 |
Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
|
NEMA TC 18 |
Packaging of Master Bundles for EPC-40 Polyvinyl Chloride (PVC) Conduit |
|
NEMA TC 2 |
Electrical Polyvinyl Chloride (PVC) Conduit |
|
NEMA TC 3 |
Polyvinyl Chloride (PVC) Fittings for Use with Rigid PVC Conduit and Tubing |
|
NEMA TC 6 & 8 |
Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installations |
|
NEMA TC 7 |
Smooth-Wall Coilable Electrical Polyethylene Conduit |
|
NEMA TC 9 |
Fittings for Polyvinyl Chloride (PVC) Plastic Utilities Duct for Underground Installation |
|
NEMA TCB- 2 |
NEMA Guidelines for the Selection and Installation of Underground Nonmetallic Duct |
|
NEMA TF 1 |
Coated Electrical Sleeving |
|
NEMA TF 2 |
Uncoated Treated Fiberglass Sleeving Standard |
|
NEMA TP 1 |
Guide for Determining Energy Efficiency for Distribution Transformers |
|
NEMA TP 2 |
Standard Test Method for Measuring the Energy Consumption of Distribution Transformers |
|
NEMA TP 3 |
Standard for the Labeling of Distribution Transformer Efficiency |
|
NEMA TR 1 |
Transformers Regulators and Reactors |
|
NEMA TRAINING MANUAL |
Training Manual on Fire Alarm Systems |
|
NEMA TS 1 |
Traffic Control Systems |
|
NEMA TS 2 |
Traffic Controller Assemblies with NTCIP Requirements-Version 02.06 |
|
NEMA TS 4 |
Hardware Standards for Dynamic Message Signs (DMS) With NTCIP Requirements |
|
NEMA UC 2 |
Undercarpet Power Distribution Systems |
|
NEMA UD 2 |
ACOUSTIC OUTPUT MEASUREMENT STANDARD FOR DIAGNOSTIC ULTRASOUND EQUIPMENT |
|
NEMA UD 3 |
STANDARD FOR REAL-TIME DISPLAY OF THERMAL AND MECHANICAL ACOUSTIC OUTPUT INDICES ON DIAGNOSTIC ULTRASOUND EQUIPMENT |
|
NEMA VE 1 |
Metal Cable Tray Systems-CSA C22.2 No. 126.1-02 |
|
NEMA VE 2 |
Cable Tray Installation Guidelines |
|
NEMA WC 2 |
Steel Armor and Associated Coverings for Impregnated-Paper -Insulated Cables-Fourth Edition; Revision No. 1 - May 1989 |
|
NEMA WC 26 |
Binational Wire and Cable Packaging Standard-EEMAC 201-2000; Errata 11/17/2000; Errata 1/27/2003 |
|
NEMA WC 27500 |
Standard for Aerospace and Industrial Electrical Cable |
|
NEMA WC 50 |
Ampacities Including Effect of Shield Losses for Single-Conductor Solid- Dielectric Power Cable, 15kV Through 69kV (Copper and Aluminum Conductors)-ICEA P-53- 426; Second Edition |
|
NEMA WC 51 |
Ampacities of Cables Installed in Cable Trays |
|
NEMA WC 52 |
High-Temperature and Electronic Insulated Wire, Impulse Dielectric Testing |
|
NEMA WC 53 |
Standard Test Methods for Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test-ICEA T-27-581 |
|
NEMA WC 54 |
Guide for Frequency of Sampling Extruded Dielectric Power, Control, Instrumentation, and Portable Cables for Test |
|
NEMA WC 55 |
Instrumentation Cables and Thermocouple Wire-Revision 1 - August 1994; Revision 2 - 1998 |
|
NEMA WC 56 |
3.0 kHz Insulation Continuity Proof Testing of Wire and Cable |
|
NEMA WC 57 |
Standard for Control, Thermocouple Extension, and Instrumentation Cables-ICEA S-73-532 |
|
NEMA WC 58 |
Portable and Power Feeder Cables for Use in Mines and Similar Applications-Same as ICEA S-75-381:1997 |
|
NEMA WC 60.1 |
Bar Coding Power and Control Wire and Cable Products-Errata: 11/3/2005 |
|
NEMA WC 60.2 |
Product Identification and Bar Coding Requirements for Building Wire Products |
|
NEMA WC 62 |
Repeated-Spark/Impulse Dielectric Testing |
|
NEMA WC 63.1 |
Performance Standard for Twisted Pair Premise Voice and Data Communications Cable |
|
NEMA WC 63.2 |
Performance Standard for Coaxial Premise Data Communications Cables |
|
NEMA WC 65 |
Reasoned Approach to Solving Solderability Problems with Tin-Coated and Nickel Coated Stranded Conductors in High Performance Wire and Cable Applications |
|
NEMA WC 66 |
Performance Standard for Category 6 and Category 7 100 Ohm Shielded and Unshielded Twisted Pair Cables-Errata: 1/28/2003 |
|
NEMA WC 67 |
Standard for Uninsulated Conductors Used in Electrical and Electronic Applications |
|
NEMA WC 70 |
Nonshielded Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy-Errata:01/30/01; Supersedes NEMA WC 3, WC 5, WC 7, and WC 8; ICEA S-95-658 |
|
NEMA WC 71 |
Standard for Nonshielded Cables Rated 2001-5000 Volts for Use in the Distribution of Electric Energy-ICEA S-96-659-1999; Supersedes NEMA WC 3, WC 5, WC 7, and WC 8 |
|
NEMA WC 72 |
Continuity of Coating Testing for Electrical Conductors |
|
NEMA WC 73 |
Wire Selection Guidelines for Wires Rated at 200-450 Degrees Celsius |
|
NEMA WC 74 |
5-46 kV Shielded Power Cable for Use in the Transmission & Distribution of Electric Energy-ICEA S-93-639; Supersedes WC 3, WC 5, WC 7, and WC 8 |
|
NEMA WD 1 |
General Color Requirements for Wiring Devices |
|
NEMA WD 6 |
Wiring Devices - Dimensional Specifications |
|
NEMA WD 7 |
Occupancy Motion Sensors |
|
NEMA XR 7 |
High-Voltage X-Ray Cable Assemblies and Receptacles |
|
NEMA Z535 COLOR CHART |
Safety Color Chart |
|
NEMA Z535.2 |
Environmental and Facility Safety Signs |
|
NEMA Z535.3 |
Criteria for Safety Symbols |
|
NEMA Z535.4 |
Product Safety Signs and Labels |
|
NEMA Z535.5 |
Safety Tags and Barricade Tapes (for Temporary Hazards) |