|
CEA CEA TVSB5 |
Multi-Channel TV Sound System BTSC System Recommended Practices |
|
CEA CEA-109- D |
Intermediate Frequencies for Entertainment Receivers |
|
CEA CEA-2003- B |
Digital Audiobook File Format and Player Requirements |
|
CEA CEA- 2004 |
Audiobook Media and Player Compatibility |
|
CEA CEA- 2008 |
Digital Entertainment Network |
|
CEA CEA-2009- A |
Performance Specification for Public Alert Receivers |
|
CEA CEA- 2011 |
OTG Transceiver Specification |
|
CEA CEA- 2012 |
MOST Network Application-(Contains Color) |
|
CEA CEA- 2027 |
A User Interface for Home Networks Using Web-based Protocols- (Contains Color) |
|
CEA CEA- 2028 |
Color Codes for Outdoor TV Receiving Antennas-Contains Color |
|
CEA CEA-23- A |
Measurement Procedures for Determining Compliance with FCC Rules for “Cable-Ready Consumer Electronics Equipment†|
|
CEA CEA- 243 |
Color Coding for Stereo Pick-Up Leads |
|
CEA CEA-426- B |
Loudspeakers, Optimum Amplifier Power |
|
CEA CEA- 461 |
Phonograph Pick-Ups with 1/2 inch Mounting |
|
CEA CEA- 517 |
Car Audio Standard |
|
CEA CEA-542- B |
Cable Television Channel Identification Plan |
|
CEA CEA-544- B |
Low Frequency Immunity of Tuners in a Cable System |
|
CEA CEA-556- C |
Outer Shipping Container Label Standard |
|
CEA CEA- 560 |
Standard Method of Measurement for Compact Disc Players |
|
CEA CEA- 600.10 |
Introduction to the CEBus Standard |
|
CEA CEA- 600.31 |
Power Line Physical Layer and Medium Specification |
|
CEA CEA- 600.32 |
Twisted Pair Physical Layer and Medium Specification |
|
CEA CEA- 600.33 |
Coax Cable Physical Layer and Medium Specification |
|
CEA CEA- 600.34 |
IR Physical Layer and Medium Specification |
|
CEA CEA- 600.35 |
RF Physical Layer and Medium Specification |
|
CEA CEA- 600.37 |
Symbol-Encoding Sublayer |
|
CEA CEA- 600.38 |
Power Line/ Radio Frequency Symbol-Encoding Sublayer |
|
CEA CEA- 600.41 |
Description of the Data Link Layer |
|
CEA CEA- 600.42 |
Node Medium Access Control Sublayer |
|
CEA CEA- 600.43 |
Node Logical Link Control Sublayer |
|
CEA CEA- 600.45 |
Node Network Layer Specification |
|
CEA CEA- 600.46 |
Node Network Layer Specification |
|
CEA CEA- 600.81 |
Common Application Language (CAL) Specification |
|
CEA CEA- 600.82 |
CAL Context Description |
|
CEA CEA-608- C |
Line 21 Data Service |
|
CEA CEA-706- A |
Component Marking Standard |
|
CEA CEA-708- B |
Digital Television (DTV) Closed Captioning |
|
CEA CEA-709.1- B |
Control Network Protocol Specification |
|
CEA CEA-709.2- A |
Control Network Power Line (PL) Channel Specification |
|
CEA CEA- 709.3 |
Free-Topology Twisted-Pair Channel Specification |
|
CEA CEA- 709.4 |
Fiber-Optic Channel Specification |
|
CEA CEA-761- A |
DTV Remodulator Specification With Enhanced OSD Capability |
|
CEA CEA-762- A |
DTV Remodulator Specification |
|
CEA CEA-766- A |
U.S. and Canadian Region Rating Tables (RRT) and Content Advisory Descriptors for Transport of Content Advisory information using ATSC A/65-A Program and System Information Protocol (PSIP) |
|
CEA CEA-770.2- C |
Standard Definition TV Analog Component Video Interface-Errata: 11/23/2004 |
|
CEA CEA-770.3- C |
High Definition TV Analog Component Video Interface |
|
CEA CEA-774- A |
TV Receiving Antenna Performance Presentation and Measurement |
|
CEA CEA-775- B |
DTV 1394 Interface Specification |
|
CEA CEA- 776.1 |
CEBUS-EIB Routers Communications Protocol-Description of the CEBUS-EIB Router |
|
CEA CEA- 776.2 |
CEBUS-EIB Router Communications Protocol- CEBUS-EIB Router Medium Access Control Sublayer |
|
CEA CEA- 776.3 |
CEBUS-EIB Router Logical Link Control Sublayer |
|
CEA CEA- 776.4 |
CEBUS-EIB Router Communications Protocol- CEBUS-EIB Router Network Layer |
|
CEA CEA- 851.1 |
IP-Based Digital Telephony for the Versatile Home Network |
|
CEA CEA- 851.2 |
Security Services for the Versatile Home Network |
|
CEA CEA-896- A |
Standard Method of Measurement for DVD-Video Players |
|
CEA CEA- 897 |
F-Connectors Color Coding for Home Television Systems |
|
CEA CEA-CEB10- A |
EIA-708-B Implementation Guidance |
|
CEA CEA- CEB11 |
NTSC/ATSC Loudness Matching |
|
CEA CEA-CEB12- A |
PSIP Recommended Practice |
|
CEA CEA- CEB14 |
EDID Recommended Practice for EIA/CEA-861 |
|
CEA CEA- CEB15 |
CRT X-Radiation Compliance Training Manual |
|
CEA CEA- CEB3 |
Recommended Practice for Camcorder Specifications |
|
CEA CEA- CEB4 |
Recommended Practice for VCR Specifications |
|
CEA CEA-CEB5- A |
Recommended Practice DTV Receiver Monitor Mode Capability |
|
CEA CEA- CEB8 |
Consideration of EIA-608-B Data Within the DTV Closed Captioning (EIA-708-B) Construct |
|
CEA CEA-CPEB6- A |
Preferred Voltage and Impedance Values for the Interconnection of Audio Products |
|
CEA CPEB2 |
Definition of Normal Operating Conditions for Television Receivers |
|
CEA EIA-238- B |
Standards for Stylus Tips Used for Disc Phonograph Record Reproducing |
|
CEA IS- 105.1 |
Decoder Interface Standard-Errata - August 1997 |
|
CEA IS- 31 |
Recommended Design Guideline Rejection of Educational FM Interference to Ch 6 Television Reception |
|
ECA 180 |
Power Transformers for Electronic Equipment |
|
ECA 181 |
Iron Core Charging Inductors |
|
ECA 183 |
Output Transformers for Radio Broadcast Receivers |
|
ECA 186- 10E |
Passive Electronic Component Parts, Test Methods for; Method 10: Effect of Soldering |
|
ECA 186- 11E |
Passive Electronic Component Parts, Test Methods for; Method 11: Thermal Shock in Air |
|
ECA 186- 12E |
Passive Electronic Component Parts, Test Methods for; Method 12: Heat-Life Test |
|
ECA 186- 13E |
Passive Electronic Component Parts, Test Methods for; Method 13: Insulation Resistance Test |
|
ECA 186- 14E |
Passive Electronic Component Parts, Test Method for; Method 14: Panel Seal Test |
|
ECA 186- 1E |
Passive Electronic Component Parts, Test Methods for; Method 1: Humidity (Steady State) |
|
ECA 186- 2E |
Passive Electronic Component Parts, Test Methods for; Method 2: Moisture Resistance (Cycling) |
|
ECA 186- 3E |
Passive Electronic Component Parts, Test Methods for; Method 3: Humidity (Steady State-Sealed Container) |
|
ECA 186- 4E |
Passive Electronic Component Parts, Test Methods for; Method 4: Dielectric Test (Withstanding Voltage) |
|
ECA 186- 5E |
Passive Electronic Component Parts, Test Methods for; Method 5: Salt Spray (Corrosion) |
|
ECA 186- 6E |
Passive Electronic Component Parts, Test Methods for; Method 6: Mechanical Robustness of Terminals |
|
ECA 186- 7E |
Passive Electronic Component Parts, Test Methods for; Method 7: Vibration Fatigue Test (Low Frequency, 10 to 55 Hertz) |
|
ECA 186- 8E |
Passive Electronic Component Parts, Test Methods for; Method 8: Vibration, High Frequency |
|
ECA 186- 9E |
Passive Electronic Component Parts, Test Methods for; Method 9: Solderability |
|
ECA 186- E |
Passive Electronic Component Parts, Test Methods for; General Instructions and Index of Tests |
|
ECA 188 |
Automation Requirements, Dimensional System for |
|
ECA 212- A |
Numbering of Electrodes and Designation of Units in Electron Tubes |
|
ECA 213 |
Test Point Locations for Printed Wiring Assemblies |
|
ECA 214 |
Calculation of Current Ratings on Hookup Wire, Method for |
|
ECA 215 |
Broadcast Microphone Cables, Basic Requirements for |
|
ECA 216 |
Adhesion of Printed Wiring, Method of Test for |
|
ECA 217- A |
Wound Cut Cores |
|
ECA 229- A |
Fixed, Wire-Wound, Precision Resistors |
|
ECA 230 |
Color Marking of Thermoplastic Covered Wire |
|
ECA 235- C |
Color Codes for Microwave Devices with Wire Leads Including Traveling Wave Tubes, Klystrons, Crossed Field Devices, Electromagnetic Leads |
|
ECA 239- A |
Electrical Rating Systems for Electron Tubes |
|
ECA 251- A |
Test to Determine the Temperature Rise as a Function of Current in Printed Conductors |
|
ECA 256- A |
Deflecting Yokes for Cathode Ray Tubes |
|
ECA 257 |
Mercury Warning Label |
|
ECA 260 |
Tape-Wound Toroidal Cores |
|
ECA 266- A |
Registered Screen Dimensions for Monochrome Picture Tubes |
|
ECA 268 |
Infrared-Filter Transmission |
|
ECA 270 |
Tools, Crimping, Solderless Wiring Devices - Recommended Procedures for User Certification |
|
ECA 272 |
Voltage Jump for Voltage Regulator and Reference Tubes, Definition and Measurement of |
|
ECA 277 |
Designation System for Metal Electron Tube Shells |
|
ECA 293 |
Sonic Wire Delay Lines |
|
ECA 297- A |
Cable Connectors for Audio Facilities for Radio Broadcasting-Correction Sheet |
|
ECA 300 |
3" Image Orthicons, Methods of Test for |
|
ECA 301- B |
Electron Tubes, Type Designation System for |
|
ECA 305 |
Display Storage Tube Nomenclature |
|
ECA 314 |
Envelope and Mounting Dimensions for Encapsulated Transformers and Inductors (Using Cores Listed in Table I of EIA Standard RS-217-A) |
|
ECA 331 |
Stereophonic Headphones with 3-Contact Plugs, Polarization of |
|
ECA 337 |
Glass Coated Thermistor Beads and Thermistor Beads in Glass Probes and Glass Rods (Negative Temperature Coefficient), General Spec. for |
|
ECA 339 |
Layer-To-Layer Adhesion of Magnetic Tape, Recommended Test Method |
|
ECA 362 |
Tensile Properties of Magnetic Tape, Recm. Test Method |
|
ECA 364- 07B |
TP-07B Contact Axial Concentricity Test Procedure for Electrical Connectors |
|
ECA 364- 100 |
TP-100 Marking Permanence Test Procedure for Electrical Connectors and Sockets |
|
ECA 364- 102 |
TP-102 Rise Time Degradation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
|
ECA 364- 14B |
TP-14B Ozone Exposure Test Procedure for Electrical Connectors |
|
ECA 364- 15 |
TP-15 Contact Strength Test Procedure for Electrical Connectors |
|
ECA 364- 18A |
TP-18A Visual and Dimensional Inspection Procedure for Electrical Connectors |
|
ECA 364- 26B |
TP-26B Salt Spray Test Procedure for Electrical Connectors, Contacts and Sockets |
|
ECA 364- 33A |
Tp-33A Inductance Measurement Test Procedure for Electrical Connectors (100 nH - 100 mH) |
|
ECA 364- 36A |
TP-36A Test Procedure for Determination of Gas-Tight Characteristics for Electrical Connectors, Sockets and/or Contact Systems |
|
ECA 364- 44A |
TP-44A Corona Test Procedure for Electrical Connectors |
|
ECA 364- 48 |
TP-48 Test Procedure for Metallic Coating Thickness Measurements of Contacts |
|
ECA 364- 50A |
TP-50A Dust (Fine Sand) Test Procedure for Electrical Connectors |
|
ECA 364- 55 |
TP-55 Current Cycling Test Procedure for Electrical Connectors |
|
ECA 364- 59 |
TP-59 Low Temperature Test Procedure for Electrical Connectors |
|
ECA 364- 60 |
TP-60 General Methods for Porosity Testing of Contact Finishes for Electrical Connectors |
|
ECA 364- 65A |
TP-65A Mixed Flowing Gas |
|
ECA 364- 70A |
TP-70A Temperature Rise Versus Current Test Procedure for Electrical Connectors and Sockets |
|
ECA 364- 79 |
TP-79 Insert Bond Strength Test Procedure for Electrical Connectors |
|
ECA 364- 85 |
TP-85 General Test Procedure for Assessing Wear and Mechanical Damage Testing of Contact Finishes for Electrical Connectors |
|
ECA 364- 86 |
TP-86 Polarizing/Coding Key Overstress Test Procedure for Electrical Connectors and Sockets |
|
ECA 364- 87 |
TP-87 Nanosecond-Event Detection for Electrical Connectors, Contacts and Sockets |
|
ECA 364- 88 |
TP-88 Residual Magnetism for Electrical Connectors |
|
ECA 364- 92 |
TP-92 Wire Bending Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
|
ECA 364- 93 |
TP-93 Repeated Wire Connection and Disconnection Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
|
ECA 364- 94 |
TP-94 Transverse Extraction Force Test Procedure for Insulation Displacement Contacts (IDC) for Electrical Connectors |
|
ECA 364- 95 |
TP-95 Full Mating and Mating Stability Test Procedure for Electrical Connectors |
|
ECA 364- 97 |
TP-97 Housing Panel Retention Test Procedure for Electrical Connectors |
|
ECA 364- 98 |
TP-98 Housing Locking Mechanism Strength Test Procedure for Electrical Connectors |
|
ECA 364- C |
Electrical Connector/Socket Test Procedures Including Environmental Classifications |
|
ECA 369 |
Midget I.F. Shields (.75 inch Square) (Reaffirmation of REC- 144) |
|
ECA 380- A |
Electrical Connectors, Small Contact Standard for |
|
ECA 386 |
Phonograph Rumble, Recommended Measurement Method for |
|
ECA 401 |
Paper, Paper/Film, Film Dielectric Capacitors for Power Semiconductor Applications |
|
ECA 402 |
Liquid Rosin Fluxes |
|
ECA 403- A |
Precision Coaxial Connectors for CATV Application (75 Ohms) |
|
ECA 405 |
Flutter Measurement of Instrumentation Magnetic Tape Recorder/Reproducers, Recommended Test Method for |
|
ECA 406 |
General Document for Connectors, Electric, Printed-Wiring Board-IPC- C-405A |
|
ECA 407- A |
Testing Procedures for Relays for Electrical and Electronic Equipment |
|
ECA 416 |
Filters, Radio Interference |
|
ECA 417- A |
Crystal Outlines |
|
ECA 421- A |
Dry Reed Switches, EIA/NARM Standard for |
|
ECA 429 |
Connectors, Electrical Flat Cable Type-IPC FC-218B |
|
ECA 436 |
Dry Reed Relays for Circuit Board Mounting |
|
ECA 468- B |
Lead Taping of Components in the Radial Configuration for Automatic Handling |
|
ECA 480 |
Toggle Switches |
|
ECA 483 |
Standard Method of Test for Effective Series Resistance (ESR) and Capacitance of Multilayer Ceramic Capacitors at High Frequencies-Editorially Corrected - February 1982 |
|
ECA 493 |
Recommended Practice for Conversion of U.S. to Metric Dimensions for Color and Monochrome Cathode Ray Tubes and Their Component Parts |
|
ECA 495- A |
Film Dielectric Capacitors with Metallized Paper Electrodes for Alternating Current Applications |
|
ECA 4980000- A |
Generic Specification for Keyboard Switches of Certified Quality |
|
ECA 498A000 |
Sectional Specification for Full and Short Stroke Keyboards of Certified Quality |
|
ECA 498AA00 |
Blank Detail Specification for Keyboard Switches |
|
ECA 498AAAA |
Detail Specification for Short Stroke Keypads |
|
ECA 498B000 |
Sectional Specification for Touch Stroke Switch Panels of Certified Quality |
|
ECA 498BA00 |
Blank Detail Specification for Keyboard Switches |
|
ECA 498BAAA |
Detail Specification for Capability Approval of Metal Dome Contact Touch Stroke Switch Panels |
|
ECA 500- A |
Recommended Practice for Measurement of X-Radiation from Projection Cathode-Ray Tubes |
|
ECA 501- A |
Recommended Practice for the Measurement of X-Radiation from Raster-Scanned Direct-View Data Display Cathode-Ray Tubes |
|
ECA 502- A |
Recommended Practice for Measurement of X-Radiation from Non- Raster-Scanned Direct-View Cathode Ray Tubes |
|
ECA 505 |
Packing for Return CRT Glass Component Packaging Material |
|
ECA 5400000- A |
Generic Specification for Sockets for Use in Electronic Equipment |
|
ECA 540A000- A |
Sectional Specification for Sockets for Chip Carriers for Use in Electronic Equipment |
|
ECA 540AA00 |
Blank Detail Specification for Chip Carrier Sockets for Leadless Type A, B or D Chip Carriers for Use in Electronic Equipment |
|
ECA 540AAAA |
Detail Specification for Chip Carrier Sockets for Leadless Type A (1.27 mm (.050") Spacing) Chip Carriers for Use in Electronic Equipment |
|
ECA 540AB00 |
Blank Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Packages for Use in Electronic Equipment |
|
ECA 540ABAA |
Detail Specification for Chip Carrier Sockets for Plastic Quad Flat Pack 0.635 mm (.025") Lead Spacing (Gullwing) |
|
ECA 540AC00 |
Blank Detail Specification for Chip Carrier Sockets for Plastic Chip Carrier (PCC) Packages with "J" Type Leads for Use in Electronic Equipment |
|
ECA 540ACAA |
Detail Specification for Chip Carrier (PCC) Family 1.27 mm (.050 Inch) Leadspacing |
|
ECA 540AD00 |
Blank Detail Specification for Adaptor - Carrier Quad Flat Pack to Pin Grid Array Sockets for Use in Electronic Equipment |
|
ECA 540ADAA |
Detail Specification for Adaptor-Carrier Quad Flatpack to Pin Grid Array Sockets for Use in Electronic Equipment |
|
ECA 540B000 |
Sectional Specification Sockets for Pin Grid Array Devices With 2.54 mm x 2.54 mm (0.1" x 0.1") Spacing for Use in Electronic Equipment |
|
ECA 540BA00 |
Blank Detail Specification: Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1" X 0.1") Spacing for Use in Electronic Equipment |
|
ECA 540BAAA- A |
Detail Specification for Mechanically Actuated (Zero and Low Insertion Force) Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1 in X 0.1 in) Spacing for Use in Electronic Equipment |
|
ECA 540BAAB |
Detail Specification for Non-Mechanically Actuated Sockets for Pin Grid Array Devices with 2.54 mm X 2.54 mm (0.1" X 0.1") Spacing for Use in Electronic Equipment |
|
ECA 540BAAC |
Detail Specification Nonmechanically Actuated Flexible Carrier Sockets for Pin Grid Array for Use in Electronic Equipment |
|
ECA 540C000 |
Sectional Specification Sockets for Relays for Use in Electronic Equipment |
|
ECA 540CA00 |
Blank Detail Specification on Relay Sockets |
|
ECA 540CAAA |
Detail Specification on Relay Socket - 10 A for Balanced Armature Relay |
|
ECA 540CAAB |
Detail Specification on Relay Sockets - 5A for Balanced Armature Relay |
|
ECA 540CAAC- A |
Detail Specification for 2 Pole, 10 A Relay Sockets |
|
ECA 540D000- A |
Sectional Specification for In-Line Package Sockets for Use in Electronic Equipment |
|
ECA 540DA00 |
Blank Detail Specification for Dual In-Line Sockets for Use in Electronic Equipment |
|
ECA 540DAAA- A |
Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment |
|
ECA 540DAAB |
Detail Specification Flexible Carrier 2 Piece Dual In-Line Socket for Use in Electronic Equipment |
|
ECA 540DB00 |
Blank Detail Specification for Decoupling Capacitor Dual In-Line Package Sockets |
|
ECA 540DBAA |
Detail Specification for Decoupling Capacitor Dual In-Line Package Sockets for Use in Electronic Equipment |
|
ECA 540E000 |
Sectional Specification for Round-Style Sockets for Use in Electronic Equipment |
|
ECA 540EA00 |
Blank Detail Specification for Round Style Sockets |
|
ECA 540EAAA |
Detail Specification for Round Style Sockets |
|
ECA 540F000 |
Sectional Specification for Multi-Package Module Sockets for Use in Electronic Equipment |
|
ECA 540FA00 |
Blank Detail Specification for Multi-Package Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAA |
Detail Specification for Multi-Package 100 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAB |
Detail Specification for Multi-Package 100 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAC |
Detail Specification for Multi-Package 50 Mil Pitch, Vertical Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540FAAD |
Detail Specification for Multi-Package 50 Mil Pitch, Angled Mounting Format Module Sockets for Use in Electronic Equipment |
|
ECA 540G000 |
Sectional Specification for Burn-In Sockets for Use in Electronic Equipment |
|
ECA 540GA00 |
Blank Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
|
ECA 540GAAA |
Detail Specification for Burn-In Sockets for Chip Carrier Packages with Molded Carrier Rings for Use in Electronic Equipment |
|
ECA 540H000 |
Sectional Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment |
|
ECA 545 |
Electromechanical Switch Test Method for Electrostatic Discharge (ESD) |
|
ECA 550 |
75 Ohm Type FD Connector Interfaces, Rating, and Characteristics |
|
ECA 552 |
EIA Standards for Electron Tubes |
|
ECA 5670000 |
EIA Commercial Component Model Specification |
|
ECA 567- A |
VHDL Hardware Component Modeling and Interface Standard |
|
ECA 7000000- A |
Generic Specification for Electronic and Electrical Connectors of Certified Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA 700A0AA |
Detail Specification for 1.27 mm Pitch, Ribbon Contact, Trapezoidal Shaped, Shielded I/O Connector |
|
ECA 700A0AB |
Detail Specification for 1.27 mm Pitch, 68 Circuit Memory Card Interconnect System |
|
ECA 700A0AD |
Detail Specification for the Interface of the 1.27 mm Pitch, Ribbon Contact (Leaf Spring), Trapezoidal Shaped, Self-Locking I/O Connector |
|
ECA 700AAAB |
Detail Specification for 1.0 mm, Two-Part Connectors for Use with Parallel Printed Boards |
|
ECA 700AOAC |
Detail Specification for 1.00 mm Pitch, 88 Circuit Dram Memory Card Interconnect System |
|
ECA 700AOAE |
Detail Specification for Trapezoidal Connectors with Nonremovable Ribbon Cable Contacts on 1.27mm Pitch Double Row Used with Single Connector Attachments (SCA2) |
|
ECA 700B000 |
Sectional Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700BA00 |
Blank Detail Specification for Rectangular/Trapezoidal Connectors of Certified Quality |
|
ECA 700C000 |
Sectional Specification for Circular Multicontact Connectors of Assessed Quality (for Frequencies Essentially Below 3 MHz) |
|
ECA 700D000 |
Sectional Specification for Discrete Contacts of Certified Quality (for Use in dc/Low Frequency Analog Applications and in Digital Applications Employing High Speed Data Rates) |
|
ECA 705 |
Electronic Industries Association - Automated Component Handling Committee - Guidelines and Procedures for Registration of New Technologies for Automated Component Handling for Publication in ACH-2000 |
|
ECA CB 2 |
Contamination of Printed Wiring Boards |
|
ECA CB 4 |
Effect of the Wire Diameter on Wirewound Resistors Reliability |
|
ECA CB 5 |
Recommended Test Procedure for Semiconductor Thermal Dissipating Devices |
|
ECA CB 5- 1 |
Recommended Test Procedure for Semiconductor Thermal Dissipating Devices-Addendum to CB5 |
|
ECA CB- 11 |
Surface Mounting of Multilayer Ceramic Chip Capacitors, Guidelines for |
|
ECA CB- 12 |
Gold Plating Study Test Report |
|
ECA CB- 13 |
X-Ray Fluorescence for Measuring Plating Thickness |
|
ECA CB- 14 |
Contact Lubrication |
|
ECA CB16 |
Integrated Passive Device (IPD) Definitions |
|
ECA CB3- B |
Specifications and Standards Associated with Solders and Soldering |
|
ECA CB6- A |
Guide for the Use of Quartz Crystal Units for Freqency Control |
|
ECA CB8 |
List of Approval Agencies, U.S. and Other Countries, Impacting Electronic Components and Equipment |
|
ECA EIA/ECA-364- 11B |
TP-11B RESISTANCE TO SOLVENTS TEST PROCEDURE FOR ELECTRICAL CONNECTORS AND SOCKETS |
|
ECA EIA/ECA-364- 12A |
TP-12A RESTRICTED ENTRY TEST PROCEDURE FOR ELECTRICAL CONNECTORS |
|
ECA EIA/ECA-364- 56B |
TP-56-B Resistance to Soldering Heat Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA/ECA-364- 91A |
TP-91A Dust Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA/ECA-703- A |
General Resistor Stress Test Qualification Specification |
|
ECA EIA/ECA- 957 |
IPD APPLICATION GUIDELINE (TERMINATION TECHNIQUES) |
|
ECA EIA/ECA- 959 |
THIN FILM RC SPECIFICATION |
|
ECA EIA-296- F |
Lead Taping of Components in Axial Lead Configuration for Automatic Handling |
|
ECA EIA-310- D |
Cabinets, Racks, Panels, and Associated Equipment |
|
ECA EIA-364- 01B |
TP-01B Acceleration Test Procedure for Electrical Connectors- Revision of EIA-364-01A |
|
ECA EIA-364- 02C |
TP-02C Air Leakage Test Procedure for Electrical Connectors |
|
ECA EIA-364- 03B |
TP-03B Altitude Immersion Test Procedure for Electrical Connectors |
|
ECA EIA-364- 04A |
TP-04A Normal Force Test Procedure for Electrical Connectors |
|
ECA EIA-364- 05B |
TP-05B Contact Insertion, Release and Removal Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2012.1 |
|
ECA EIA-364- 06B |
TP-06B Contact Resistance Test Procedure for Electrical Connectors |
|
ECA EIA-364- 08B |
TP-08B Crimp Tensile Strength Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2003.1 |
|
ECA EIA-364- 09C |
TP-09C Durability Test Procedure for Electrical Connectors and Contacts |
|
ECA EIA-364- 1000.01 |
TS-1000.01 Environmental Test Methodology for Assessing the Performance of Electrical Connectors and Sockets Used in Business Office Applications |
|
ECA EIA-364- 101 |
TP-101 Attenuation Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems |
|
ECA EIA-364- 103 |
TP-103 Propagation Delay Test Procedure for Electrical Connectors, Sockets, Cable Assemblies of Interconnection Systems |
|
ECA EIA-364- 104A |
TP-104A Flammablility Test Procedure for Electrical Connectors |
|
ECA EIA-364- 105 |
TP-105 Altitude - Low Temperature Test Procedure for Electrical Connectors |
|
ECA EIA-364- 107 |
TP-107 Eye Pattern and Jitter Test Procedure for Electrical Connectors, Sockets, Cable Assemblies or Interconnection Systems |
|
ECA EIA-364- 108 |
TP-108 Impedance, Reflection Coefficient, Return Loss, and VSWR Measured in the Time and Frequency Domain Test Procedure for Electrical Connectors, Cable Assemblies or Interconnection Systems |
|
ECA EIA-364- 13B |
TP-13B Mating and Unmating Forces Test Procedure for Electrical Connectors |
|
ECA EIA-364- 16A |
TP-16A Stripping Force Test (Solderless Wrapped Connectors) Test Procedure for Electrical Connectors |
|
ECA EIA-364- 17B |
TP-17B Temperature Life with or without Electrical Load Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 19A |
TP-19A Torsional Insert Retention Test Procedure for Electrical Connectors-Revision of EIA-364-19 |
|
ECA EIA-364- 20C |
TP-20C Withstanding Voltage Test Procedure for Electrical Connectors, Sockets and Coaxial Contacts |
|
ECA EIA-364- 21C |
TP-21C Insulation Resistance Test Procedure for Electrical Connectors, Sockets, and Coaxial Contacts |
|
ECA EIA-364- 22B |
TP-22B Simulated Life Test Procedure for Electrical Connectors |
|
ECA EIA-364- 23B |
TP-23B Low Level Contact Resistance Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 24B |
TP-24B Maintenance Aging Test Procedure for Electrical Connectors- FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2002.1 |
|
ECA EIA-364- 25C |
TP-25C Probe Damage Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2006.1 |
|
ECA EIA-364- 27B |
TP-27B Mechanical Shock (Specified Pulse) Test Procedure for Electrical Connectors |
|
ECA EIA-364- 29B |
TP-29B Contact Retention Test Procedure for Electrical Connectors- FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2007.1 |
|
ECA EIA-364- 30A |
TP-30A Capacitance Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 31B |
TP-31B Humidity Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 32C |
TP-32C Thermal Shock (Temperature Cycling) Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 37B |
TP-37B Contact Engagement and Separation Force Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2014 |
|
ECA EIA-364- 38B |
TP-38B Cable Pull-Out Test Procedure for Electrical Connectors |
|
ECA EIA-364- 39B |
Hydrostatic Test Procedure for Electrical Connectors, Contacts and Sockets-TP-39B |
|
ECA EIA-364- 40B |
TP-40B Crush Test Procedure for Electrical Connectors-FSC 5935; Should Be Used Instead of MIL-STD-1344, Method 2008.1 |
|
ECA EIA-364- 41C |
TP-41C Cable Flexing Test Procedure for Electrical Connectors |
|
ECA EIA-364- 42B |
TP-42B Impact Test Procedure for Electrical Connectors |
|
ECA EIA-364- 43B |
TP-43B Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors |
|
ECA EIA-364- 45A |
TP-45A Firewall Flame Test Procedure for Electrical Connectors |
|
ECA EIA-364- 47A |
TP-47A Conductor Unwrap (Solderless Wrapped Connection) Test Procedure for Electrical Connectors-Revision of EIA-365-47 |
|
ECA EIA-364- 51A |
TP-51 Ice Resistance Test Procedure for Electrical Connectors |
|
ECA EIA-364- 52A |
TP-52A Solderability of Contact Terminations Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 53B |
TP-53B Nitric Acid Vapor Test, Gold Finish Test Procedure for Electrical Connectors and Sockets |
|
ECA EIA-364- 54A |
TP-54A Magnetic Permeability for Test Procedure for Electrical Connectors, Contacts, and Sockets |
|
ECA EIA-364- 58A |
TP-58 Temperature Life with Mechanical Loading for Connectors with Removable Contacts (Static Mechanical Load at Temperature) Test Procedure for Electrical Connectors |
|
ECA EIA-364- 62A |
TP-62A Terminal Strength Test Procedure for Electrical Connectors, and Sockets |
|
ECA EIA-364- 66A |
TP-66A EMI Shielding Effectiveness Test Procedure for Electrical Connectors |