 |
| Purchase Information |
| Use this form to request purchase information on IEEE online subscriptions. |
|
|
Document IEEE 535 is offered by IHS as part of an online subscription. This subscription contains many documents on the same topic.
You may also purchase this document alone from the IHS Standards Store.
IEEE 535 Document Information:
Title
Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations
The Institute of Electrical and Electronics Engineers, Inc.
Publication Date:
Dec 6, 2006
Scope:
Foreword
(This Foreword is not a part of ANSI/IEEE Std 535-1986, IEEE Standard for Qualification of Class 1E Lead Storage Batteries for Nuclear Power Generating Stations.)
ANSI/IEEE Std 323-1983, Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations, was developed to provide guidance for demonstrating and documenting the adequacy of electrical equipment used in all Class lE and interface systems. This standard, ANSI/IEEE Std 535-1986, was developed to provide specific methods and type test procedures for lead storage batteries in adherence to ANSI/IEEE Std 323-1983.
Adherence to this standard may not suffice for assuring public health and safety because it is the integrated performance of the electrical systems of the station that limits the consequence of accidents. Each applicant has the responsibility to assure himself and others that this document, if used, is pertinent to his application and that the integrated performance of his station is adequate.
This standard was prepared by the Working Group on Batteries of the Station Design Subcommittee of the Power Generation Committee. At the time this document was approved, the working group had the following members:
J. H. Bellack, Chair
J. W. Anderson
D. Brandt
J. L. Chamberlin
V. E. Dalke
E. Daniels
P. J. Demar
D. O. Feder
J. Gourdier
R. S. Green
R. W. Hopewell
R. Kelleher
P. Kine*
J. Knox
D. S. Levin
S. Meissel
J. F. Montalbano
B. Radimer
H. K Reid
T. Ruhlman
B. G. Treece
G. Tsouderos
G. Walker
*Liaison representative, SC-2 of NPEC
The following persons were on the balloting committee that approved this document for submission to the IEEE Standards Board:
W. W. Avril
M. S. Baldwin
J. H. Bellack
I. B. Berezowsky
G. Berman
F. L. Brennan
P. G. Brown
R. W. Cantrell
H. E. Church
R. S. Coleman
R. E. Cotta
M. L. Crenshaw
P. M. Davidson
G. R. Engmann
W. M. Fenner
A. H. Ferber
D. I. Gorden
R. D. Handel
F. W. Keay
P. R. Landrieu
G. L. Luri
J. T. Madill
O. S. Mazzoni
M. W. Migliaro
J. T. Nikolas
R. E. Penn
J. D. Plaxco
R. J. Reiman
B. E. Roberts
A. J. Spurgin
G. I. Stillman
J. E. Stoner, Jr
J. B. Sullivan
T. D. Younkins
When the IEEE Standards Board approved this standard on September 19, 1985, it had the following membership:
John E, May, Chair
John P. Riganati, Vice Chair
Sava I. Sherr, Secretary
James H. Beal
Fletcher J. Buckley
Rene Castenschiold
Edward Chelotti
Edward J. Cohen
Paul G. Cummings
Donald C. Fleckenstein
Jay Forster
Daniel L. Goldberg
Kenneth D. Hendrix
Irvin N. Howell
Jack Kinn
Joseph L. Koepfinger*
Irving Kolodny
R. F. Lawrence
Lawrence V. McCall
Donald T.Michael*
Frank L. Rose
Clifford O. Swanson
J. Richard Weger
W. B. Wilkens
Charles J. Wylie
Scope
This document describes qualification methods for Class lE lead storage batteries and racks to be used in nuclear power generating stations outside of primary containment. Qualification required in ANSI/IEEE Std 308-1980 [2] can be demonstrated by using the procedures provided in this standard in accordance with ANSI/IEEE Std 323-1983 [3]. Battery sizing, maintenance, capacity testing, installation, charging equipment, and consideration of other type batteries are beyond the scope of this standard.
About IHS
IHS (NYSE: IHS) is a leading global provider of critical technical information, decision-support tools and related services in a number of industries including aerospace and defense, automotive, construction, electronics, and energy. IHS serves customers ranging from large governments and multinational corporations to smaller companies and technical professionals in more than 100 countries. IHS been in business for more than 45 years and employ more than 2,300 people around the world.
